Macbook Pro Retina (15") can't connect to wireless mouse and external USB keyboard

Hi All,
I got my new MacBook Pro Retina (15 inch) about 3 weeks ago. It works fine. I got a 30" Dell screen that I am using via thunderbolt/usb adapter. Also, I am using a thunderbolt ethernet adapter. Both adapters work fine without any problems.
I have an apple usb keyboard connected to the USB hub of the screen, as well as my iphone cable. It is a regular, full size apple keyboard. In addition to this, I have a logitech nano connected directly to the right usb port of the macbook pro.
This setup was working well until a few days ago. I lost connectivity with my mouse. Initially, I thought the batteries are empty. After replacing them, I still had no connection (again, the usb receiver is *directly* connected to the macbook).
I changed a few cables here and there and noticed that I can get either the keyboard to work or the mouse but not both at the same time. A reboot did not help.
Did anybody encounter such a strange problem already? If so, what could I possibly do?
Thank You,
--Martin

Hello nikkig00,
It is certainly difficult to use the computer if your wireless keyboard and mouse do not connect.  I found a few resources I recommend for this issue.
I recommend reviewing this article first:
Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/ts3048
If the issue persists, I recommend reviewing the section titled "Top troubleshooting tips" in the article below.  Step 9 specifically stands out to me for the issue you described:
9. Restart your computer
Sometimes a simple restart of your Mac is all it takes to get things running smoothly again. You may also want to try resetting your computer's PRAM and NVRAM.
Bluetooth Quick Assist
http://support.apple.com/kb/ht1153
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

  • I'm using a Macbook Pro Retina. I'm connected using a wifi and FaceTime works perfectly. But if I open Safari(or Chrome, or Firefox or any other brower) it said: you're not connected to the internet. I've also an iPhone that works fine on the same wifi.

    Could it be  because I'm using the same IP address over 2 devices? How can I set them differently?
    Thank you very much.

    Hi.
    Try putting these numbers in Network>TCP/IP>DNS Servers, for the Interface you connect with...
    208.67.222.222
    208.67.220.220
    Then Apply

  • I just brought a brand new Macbook pro retina display, when i connect it to my apple tv through airplay its too slow and when it try to play a movie apply tv is always a minute or 2 behind. How can i fix this?

    I just brought a brand new Macbook pro retina display, when i connect it to my apple tv through airplay its too slow and when it try to play a movie apply tv is always a minute or 2 behind. How can i fix this?

    Hello HanaAmer1,
    We've an article which provides troubleshooting steps that can help get AirPlay workign correctly.
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS5209
    Cheers,
    Allen

  • HT204291 My airplay icon is no longer appearing on my Macbook Pro. How can I connect to my Apple TV?

    My airplay icon is no longer appearing on my Macbook Pro. How can I connect to my Apple TV?

    Restarting MacBook Pro, Apple TV and WiFi router could solve the problem.

  • MacBook Pro Retina 13" - Can i upgrade the dual-core i7 to quad-core i7 CPU?

    MacBook Pro Retina 13" - Can i upgrade the dual-core i7 to quad-core i7 CPU?  (obviously not talking about BTO, but about "self-service" upgrade ...)

    Yeah it is soldered. So no upgrade possible. Found here: http://www.everymac.com/systems/apple/macbook_pro/macbook-pro-retina-display-faq /macbook-pro-retina-display-processor-ram-expansion-slots.html
    Thanks Jon P D !

  • I just bought a 13" macbook pro retina display. I need to run films and presentations remotely. Does RemoteHD work on a machine without an IR sensor, or does anybody know what would work?

    I have a mid 2009 Macbook Pro and I have just bought a 13" macbook pro retina display. I need to run films and presentations remotely., i.e not sitting at the computer.
    Does RemoteHD work on a machine without a built in IR sensor, or does anybody know what would work?

    I can't vouch for this as I've never tried one, but I think this does what you're after.
    http://www.satechi.net/index.php/bluetooth/bluetooth-remote/satechi-bluetooth-sm art-pointer

  • My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words.

    My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words and looks them up via dictionary. I currently have a wireless mouse connected and I am still having the same problems.
    I fee like I may have a virus or my laptop is perhaps being accessed remotely. All of the sharing options are unchecked.
    HELP PLEASE
    Very worried!!

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
         after the chime press and hold down the OPTION key until the boot manager screen appears.
         Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

  • MacBook Pro Retina (15") intermittant freeze connecting firewire drive to Thunderbolt adapter

    Since having my MacBook Pro Retina (15") I have been having intermittant (often only have 5 days or so) hard freeze on connecting firewire 800 drives to it via the thunderbolt adapter.  This occurs with both powered  (LaCie 2gb) and unpowered (Iomega GO 1gb) drives.  After the last few times I tried connecting the thunderbolt adapter and then plugging in the drive (rather than having the firewire cable already plugged into the adapter and then plugging the adapter in).  I was able to reproduce a hard freeze after nothing happened when the adapter alone was plugged in, plugging in the powered drive caused an immediate freeze.
    By a hard freeze I mean that when the system reboots it doesn't even recognise a crash occured.  There was no kernel panic screen.
    I plug into these drives at least once a day but it usually takes up to a week before the freeze occurs.  I have had no trouble with leaving the unpowered drive cnnected during sleep it appears to be when I change drives.  I always unplug the adapter and make sure the computer is still running before putting to sleep and make sure it is functioning properly after wake before connecting the drive.
    Using USB 2.0 there have been no problems with the same drives.
    Any ideas?

    I believe this issue is caused by bad ground coupling between the two devices, some of the induced charge can spark between connectors in the thunderbolt port causing computer to basicly freeze.
    To solve this issue try touching the connectors outside metal part to your macbooks body first to discharge it, then while plugging int the connector do it at slight angle so the metal of the connector touches Mac's body.
    This method has been working for me.

  • (AIRDROP) Macbook Pro Retina Display Can't see Macbook Pro mid 2012

    Hello,
    I was trying to send and receive files from my macbook pro 13' mid 2012 (MBP) to and from macbook pro retina display 13' (MBPR) using airdrop.
    both on Yosemite.
    The problem is, I can't see my MBP from MBPR in airdrop. But the other way around works fine, I can see and send files from MBP to MBPR.
    I've changed the 'allow me to be discovered by : Everyone' on both mac. Bluetooth and wifi are on. I even tried to search onlder mac from MBPR but no result.
    Does anyone have the same problem? Is there any solution for this?

    I am aware there are symbols. My technical issue is the MagSafe2 adapter. What people typically do is connect their laptops to the wall when they're battery dies off. No biggie. I can attach it to the outlet. Well, when I connect the adapter to the outlet, nothing happens. Nothing happens at home, at Starbucks, at McDonalds, at other people's home.
    When I brought this up with technical support in August when I bought it, technical support person said I might have issues with my electrical wiring at home. I've never had issues with electrical wiring at home because my other Apple products work fine when connected to the outlet. My July 2011 MacBook Pro charged without a hitch.
    And I was able to charge my Retina MBP only at night or very early in the morning.
    But this weekend, I couldn't charge it at all. I'm starting to think it might be the MagSafe2 adapter problem.
    I feel rather ridiculous buying the highest-end of the 15 inch Retina MBP. It cost me over $3000. Right now I'm working with my 5 year old Hewlett Packard laptop. At least my HP works, which can't be said about this top-of-the line Apple product.
    Probably explains why Apple stocks are falling. At $3000 I shouldn't be having these type of problems.
    Sheeeesh!!!

  • I can't play a movie I have rented from ITunes on my macbook pro retina, what can I do?

    I have a macbook pro retina display and I have rented a movie on it, now I just want to play it and I can't. The movie has already been downloaded. The problem is that I can't play it and the rental is going to end in 4 hours. Please help me!! I need to know how to reproduce it. Thank you

    Hey ludhfneiu,
    Thanks for the question. If you were unable to redeem your rental, or never had the chance to watch it, please report an issue with your purchase:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933
    Thanks,
    Matt M.

  • MacBook Pro(Mid 2012) Can't connect to my Dynex TV with mini display port to VGA adapter

    I have a MacBook Pro(Mid 2012, running  OS X 10.9.4) and I recently just bought a mini display port to VGA adapter so I could hook it up to my dynex TV but when I connect everything my TV says no signal.  Do I need to do something in settings?

    Hi psikalis,
    If you are having issues connecting an external display to your MacBook Pro, you may find the information and troubleshooting steps in the following articles helpful:
    OS X Mavericks: Connect multiple displays to your Mac
    http://support.apple.com/kb/PH13814
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Regards,
    - Brenden

  • MacBook Pro Retina sound stopped working unless I put in and remove my headphones

    I have a MacBook Pro Retina and the audio only works if I plug in my headphones and then pull them out. I hear the ding when I turn the computer on but nothing else once it's booted. Does anyone else have this issue? I confirmed that my sound settings are correct.

    If you see a red light in the audio output port, then the headphones will be receiving the audio signal.  When you insert and pullout your headphones you are probably tripping an internal switch that was stuck and now enables the sound to come from the internal speakers.  This is a normal solution to that problem, but really should not occur.  A trip to the Apple store genius bar might be a good idea.  You still must be within the warranty period.
    Ciao/

  • Bluetooth can't connect to wireless mouse

    After working flawlessly for two years, now my iMac no longer connects to the wireless mouse and keyboard that came with it. I changed the batteries in both to no avail. A US̆B mouse works fine. What could be causing this?

    Hello nikkig00,
    It is certainly difficult to use the computer if your wireless keyboard and mouse do not connect.  I found a few resources I recommend for this issue.
    I recommend reviewing this article first:
    Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/ts3048
    If the issue persists, I recommend reviewing the section titled "Top troubleshooting tips" in the article below.  Step 9 specifically stands out to me for the issue you described:
    9. Restart your computer
    Sometimes a simple restart of your Mac is all it takes to get things running smoothly again. You may also want to try resetting your computer's PRAM and NVRAM.
    Bluetooth Quick Assist
    http://support.apple.com/kb/ht1153
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Can I have my wireless mouse and the magic trackpad both active at the same time next to my computer?

    Can I have both my wireless mouse and the Magic Trackpad active at the same time next to my desktop iMac?

    Yes.  I do.  I use the Trackpad to make fine adjustments for video edits.

  • Can I use the HDMI Out on my macbook pro retina for audio without connecting a video device?

    While the MBP has TOSLINK output from the headphone jack, TOSLINK does not have the bandwidth to carry the high resolution audio from many blu-rays and DVD-Audio disks. I would like to hook my MBP to an audio-only HDMI sink so I can pipe the multichannel output to my surround speaker setup.
    My concern is that the MBP will get "confused" and do one of the following things - both of which are "bad":
    1) It will decide that a video device is there, and put the desktop on the nonexistent HDMI display OR
    2) It will decide to send no signal at all (no video, no audio) because it sees no video device.
    Any thoughts on this?
    In short - thinking of using something like this: http://www.ambery.com/2hddodtsdihd.html
    with the HDMI out of the MBP and then piping its 6 discrete analog outputs to my old (but excellent for computer speakers) Logitech Z680 setup.
    But I want any movie video to remain unperterbed on my Thunderbolt display. And if I am not watching a movie and am just listening to multichannel FLACs or something, then I'd like to run the media player normally and have the usual desktop on my MBP or Thunderbolt display.
    Any thoughts?
    Thanks to all!!
    -L

    nopenshaw3 wrote:
    I have searched through the forums relentlessly of both Mac and third party, but I seem to never find a good, well thought out answer for my specific question. Every answer is filled with snobby know-it-alls who either respond with sarcastic answers or post links to other threads that don't answer the question in an attempt to make the asker feel like an idiot.
    Not the best way to get started frankly but ...
    nopenshaw3 wrote:
    QUESTION 1: Is there anyway that I can buy a new logic board with upgraded graphics card and it will work?
    Not from Apple, you can go to the grey market if you choose but it is most likely that the only MB that will work is the one you already have.
    nopenshaw3 wrote:
    I have also read a little bit into using the Thunderbolt port as a means to run an additional graphics card through, the hardware for it being built by a company named Sonnet.
    QUESTION 2: Is this an option that will actually work with my Macbook Pro setup and give me better graphics card capabilities?
    Maybe, if the Sonnet is properly Thunderbolt compatible it should.
    nopenshaw3 wrote:
    So with that said, please, If you're going to respond, just do so in a manner that will actually help me out. I know it's a lot to ask, but please, PLEASE DON'T BE ONE OF THOSE PEOPLE!
    Yes, well ... you have a nice day now.

Maybe you are looking for

  • Creative Cloud is suddenely a trial version?

    Really? What is Adobe doing? Seems as tho' others are experiencing the same issue. MAC and PC.... [groan] First they launch updates that disable 3D in Ps CS6 EXT and now I'm getting these alerts on other CC apps as well (Ai and Id) to register and bu

  • DV camera firewire

    I need to get some video from my Mini DV Camera onto my iMac. Is there a certain firewire I need to get? I need to be able to go into and shop and find what I need. I have no idea about Firewire..or is there another way to get the vdeo onto the compu

  • Unable to lunch the XCM Tool

    Hi Experts, I am getting th following error when i am trying to lauch the xcm tool using the following url. Please let what could be the reason like. URL: http://localhost:50000/b2b/admin/xcm/init.do Error: 404 Not Fund Error. The requested resource

  • Suddenly my history is displaying in a column along the left panel of my browser. I can't make it disappear. How do I get rid of it?

    It's a blue column that has a search box and Today and Yesterday on it. It stretches all the way down my screen. There's no visible X to get rid of it. Suggestions?

  • CS6 Master Collection menu fonts break

    This past year when installing the CS6 Master Collection either manually or with an installation job, the fonts for the drop-down menus for AI, Dreamweaver, and Photoshop come up jibberish.  It also affects non Adobe programs as well.  The drop down