Macbook Pro Retina doesn't see internal SSD drive

Hi Guys,
I have a problem with my Macbook Pro Retina 13(late 2012). Yesterday I've done clean install of Yosemite. Everything worked fine, and I wanted to restore my files using Time Machine. So I restarted it (command +R), plugged in my extertal hard drive, turned on TM restore option and chose my SSD drive as a place to install. Mac asked me to enter password for the SSD (default filevault2 in yosemite), I entered the password, system accepted it and then something went wrong. System told me to restart mac and try again. I restarted it, and did like previous but this time, my mac stopped to see his internal SSD drive. System was asking where to install yosemite form Time Machine and there were no drive to choose. I turned on disc utility, and I see my SSD drive there but I can't erase it, or unlock (picture in appendage). I can only verify disc and it shows that drive is fine. I've tried to install Yosemite on my external drive and boot from there,to unlock SSD in settings(I've chose my Ex. drive as a place to install Yosemite) but it didn't work. I even tried internet recovery (command+option+R) but I didn't help, SSD drive was still useless.
I think my SSD is still locked, but I don't know how to unlock it now. I don't need to use Time Machine anymore(I have my files in other drive too). It can be clean install but please, can somebody tell me what to do? I have exams this week and really need a computer :<

Start your mac up by holding the alt key. That is boot from function.
If its empty then you might have a hard drive issue. Due to your hard drive being picked up but not the partition on the drive. This will most probably be a OS X reinstall.
Erase the drive and reinstall the OS X or run a recovery mode.
Good luck

Similar Messages

My macbook pro retina wont recognize my external hard drive

my macbook pro retina wont recognize my external hard drive.
i opned the hard drive in the past on my computer and used it alot.
one time when i took it out i forgot to eject it, and since then when ever i conect it it would never show up on my computer or ever recognize the device.
please help me!

For starters try a PRAM reset.
DALE

Early 2013 Macbook Pro Retina 2.7 i7 512GB SSD and 16gb Ram with Serious Cuda Problems! Trying to teach Apple their Macbook Pro Retina isn't a Pro Jan. 11. 2015.

Apple replaced the logic board, wiped the computer, did a fresh instal of the OS, and also a fresh instal of all the programs during the beginning of 2015. The GeekBench scores are the highest of any of the similar computers (at least on the day of my testing). But here's what's happening. The Macbook Pro Retina has a GeForce GT 650m with Cuda Technology and it can't handle editing in Premiere Pro with Cuda Acceleration turned on. Open CL, a second form of graphic acceleration on the Macbook Pro, appears to be functioning properly.
At the Apple Store on 1-10-2015, I was told that since the logic board and the graphic cards have been replaced that there is nothing they can do and they recommend contacting Corporate. This comes after they told me to buy a new logic board and that that would solve the problem. This comes after Apple did not listen, for over a month, about the possibility that they didn't properly build a professional notebook computer.
The computer displays a black program monitor screen, at random times, when the user edits footage with Cuda Acceleration enabled. It used to lead to an entire system crash and/or a Premiere Pro crash before the operating system was completely re-installed. My solution, since I bought the computer, was to edit in Open CL... However, I've come to learn that there is a major difference in performance between Open CL and Cuda Acceleration.
For the Macbook Pro Retina, Adobe Media Encoder render times are about 20% faster with Cuda Acceleration than Open CL. The 2013 Macbook Pro Retina appears to be able to handle Cuda Acceleration in Media Encoder, but I have had a number of issues leading to program crashes on every project before the new logic board and operating system were installed. For over a year and a half, I actually never used Cuda Acceleration. Having sent every crash report and user data to Apple over that time, I truly expected an update of some sorts and it never came.
FYI: The latest Macbook Pro Retina uses the GeForce GT 750m... This is essentially the same graphic card that performs about 10 - 20% faster due to a new "boost mode." More importantly, it actually has the exact same number of Cuda cores. Having the same number of Cuda Cores means that the Cuda Acceleration is essentially the same when exporting or viewing video. To prove a point to Apple that their 2013 Macbook Pro Retina isn't functioning properly, I bought the latest computer with the 2.5 i7, 16gb Ram, 512gb SSD and I can honestly say that the 2014 model works perfectly fine with Cuda Acceleration turned on while editing in Premiere. I can also say that a proper render test proved the 2013 and 2014 model to be the exact same.
I'm new to this whole pay $2700 for a computer that your manufacturer didn't / can't test properly, so I will be contacting Apple and speaking with Senior Advisors, their Customer Support division, and will soon speak with their Corporate branch. I'm confident that the Early 2013 Macbook Pro Retina with a 2.7 i7 16gb Ram and a 512 SSD is nearly the same at rendering video and editing video, provided the Cuda Acceleration works, as their latest 2014 Macbook Pro Retina with the 2.5 i7 processor 16gb Ram, and a 512 SSD. It's truly a great computer and a great build, minus their current inability to properly test / diagnose their computer.
Knowing that the latest graphic card in the Macbook Pro lineup is essentially the same model, I feel that Apple is not directly looking into the viability and life span of their current Macbook Pro Retina product line. They can't test for performance issues relating to their graphic cards, so why consider buying from them when the end user is actually in a position to experience up to a 20% decrease in certain professional programs.
For future reference, I'd strongly urge other individuals to avoid purchasing Apple products if they offer Cuda Technology. In my opinion, Apple is an Open CL organization, at best, who is not responsibly manufacturing / producing computers that fit their organization's strengths. For a fact, they can't test their Cuda Technology and won't even attempt to address Cuda Acceleration errors for Apple owners (01-11-2015). I say this having walked out of the Apple Store on 1-10-2015 with virtually no support other than to contact Corporate.

Looks like a RAM issue.
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x000000000000000000000000000000000000
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x000000000000000000000000000000000000

Macbook pro retina doesn't turn on for a day or two

Macbook Pro Retina 13-inch Late 2012
2.5GHz Intel Core i5
OS X Yosemite (10.10.2)
So this is a weird one... I recently purchased a used Macbook Pro Retina and the previous owner had upgraded the hard drive for a bigger size. My macbook worked great for a few days but then one night I closed it and the next day when I opened it, it would not turn on. I tried rebooting the battery (SHIFT+CONTROL+OPTION and POWER) then hitting power but NOTHING. At one point, I heard a clicking sound when I would leave the power button down. Then... two days later I push the power button just because and BAM! The screen comes on. (I didn't hear the start up sound, and it wasn't like it restarted.) It was as if the screen brightness was all the way down but then came back. (I kept trying to adjust that too before it turned on).
I don't understand!!! Two days later, same thing happened. Then again, it turned back on a day later.
The only thing I noticed that was weird was when I connected it to my tv with HDMI cable. The laptop screen would freeze and get distorted and I would have to force a restart (the black screen with the apple would appear and the loading bar as if I would updating the software).
I'm soooo confused and I don't want this to keep happening. I would appreciate any type of help or advice!!

Hi RACan2,
Welcome to the Apple Support Communities!
I understand that your MacBook Pro has had some strange startup and power issues. In this situation, To begin troubleshooting, I would recommend reading over and working through the attached article.
If your Mac won't turn on - Apple Support
Best regards,
Joe

My Macbook Pro (retina) doesn't want to read an IDE with adapter?

I purchase a Sabrent USB 2.0 to Sata/IDE hard drive Adapter, as I would like to look at all the data on three old hard drives I've extracted from old PC's (which had Windows 95 - 98 I believe) as it's mainly just photo's and perhaps a few documents needed.   May be some .mp3 music files as well.
Now, I sit here with my Macbook Pro on my lap, the old Hard drive is humming nicely, the red LED showing on my adapter showing the USB is hooked up nicely to the Macbook....but if I open either Finder or Disk Utility nothing is showing up?
By what I can tell, the IDE HD is set as 'master' if that helps?
I'm not quite sure why there is an issue, but I thought some of you folks would be much more an expert on this than I, as I it just took me most of a day to figure out how to correctly put a new Samsung EVO SSD in my wife's 2012 Macbook Pro, where I then took out the optical drive and put a caddy with her old HD in it. I ran 'Carbon Copy' cloner, and all is good....albeit, I haven't yet eliminated the data on the Sata drive, as it asks me for a password to be able to do this, and I'm not sure if that is the correct way to delete all files and repartition?   So in reality, I guess I have TWO questions!
All three drives I have are from PC's, and are IDE drives from a Window based PC, so should my Macbook Pro be able to read these drives, and be able to copy the files I'd like to save/copy from it?   I'd then like to transfer them to my external hard drive (4 TB) which are mainly photo's of my kids when they where little.   Not sure if having the IDE set as 'master' is the issue, or if the data being Windows based might be it?   I'm new to doing this sort of thing, so I appreciate any advice you might have.
Thanks in advance!

Remove the WiFi profile in System Preferences/Network and reset up the connection.

Macbook Pro retina doesn't show login field

Hi everyone!
I have a problem with my brand new Macbook Pro retina.
After switching the rights of the harddrive for different users to read only the harddrive itself was locked for me (THE BIG RED MINUS at the folder that appeard instead of the hardrive icon?!
No chance for me to undo it and now, now chance to start the computer again.
SMC reset wasn't working and a Parameter-Ram reset was also without result. I suggest that the harddrive has now no user who can login.?!
Please help me in this matter. Everthing went so fine that far. Migration etc. but now I would like only to shout into the dark (germany 23:14 pm)
greets from old Wolle

New Mac?
Contact AppleCare Germany.
http://www.apple.com/support/contact/en/phone_contacts.html

MacBook Pro can no longer see the hard drive

I've got a MacBook Pro Core 2 Duo, 15-inch.
Okay, so I was chasing the nazis out of North Africa in Call of Duty 2 when the game froze. Command-Option-Escape was unresponsive, so I held down the power button to shut the whole thing down. When I brought it back up, I got the flashing folder icon.
After yelling a few words I shan't repeat here, I booted off the installation DVD, then started up Disk Utility to try to repair the disk. However, Disk Utility only sees the DVD; it doesn't see the hard drive at all. Neither does Startup Disk or System Profiler. (The hard drive would be under the ATA section in System Profiler's menu, right? It only shows the DVD drive.) If I try to go ahead with the OS X installation, at the "Select a Destination" screen, where the list of disks should be is disturbingly blank. So according to every method I've tried so far, it's as if my hard drive has been entirely disconnected.
This was my Christmas present, and I was hoping to get at least two years out of it, not two weeks. Anyone have any idea how to get this beautiful machine back on its feet again? I'm familiar with Unix and not afraid of using the command line, but I'm not sure what to try there.
15" MacBook Pro C2D Mac OS X (10.4.8)

Okay, second question: How does this forum software work? According to the thread list, someone named MacWizard has replied to this thread, but I can't see it.
MacWizard, if you could email your reply to spearbrave at gmail point c0m so I can read it there, I'd appreciate it.
15" MacBook Pro C2D Mac OS X (10.4.8)

MacBook Pro Retina (15") intermittant freeze connecting firewire drive to Thunderbolt adapter

Since having my MacBook Pro Retina (15") I have been having intermittant (often only have 5 days or so) hard freeze on connecting firewire 800 drives to it via the thunderbolt adapter. This occurs with both powered (LaCie 2gb) and unpowered (Iomega GO 1gb) drives. After the last few times I tried connecting the thunderbolt adapter and then plugging in the drive (rather than having the firewire cable already plugged into the adapter and then plugging the adapter in). I was able to reproduce a hard freeze after nothing happened when the adapter alone was plugged in, plugging in the powered drive caused an immediate freeze.
By a hard freeze I mean that when the system reboots it doesn't even recognise a crash occured. There was no kernel panic screen.
I plug into these drives at least once a day but it usually takes up to a week before the freeze occurs. I have had no trouble with leaving the unpowered drive cnnected during sleep it appears to be when I change drives. I always unplug the adapter and make sure the computer is still running before putting to sleep and make sure it is functioning properly after wake before connecting the drive.
Using USB 2.0 there have been no problems with the same drives.
Any ideas?

I believe this issue is caused by bad ground coupling between the two devices, some of the induced charge can spark between connectors in the thunderbolt port causing computer to basicly freeze.
To solve this issue try touching the connectors outside metal part to your macbooks body first to discharge it, then while plugging int the connector do it at slight angle so the metal of the connector touches Mac's body.
This method has been working for me.

Macbook Pro, MacOS 10.7.5, Internal CD Drive not Recognized on Mac side, DOES work on Parallels (Win7) side

2011 Macbook Pro, running MacOS 10.7.5, Internal CD Drive Matshita DVD-R, UJ-8A8 (firmware HB14), doesn't recognize drive when insert CD. See lots of issues on board about this, haven't seen good resolution yet.
Another clue perhaps... I'm also running Parallels (Build 9.0.24172), with Windows 7 Home Premium (service pack 1 installed), drive recognized and works just fine on the Windows 7 side of the system, which means I can at least load up photos, videos from CDs, drag them over to Mac side, but cannot install Mac software because it won't recognize the drive.
Suggestions?

You're welcome. I know, it's confusing the first time you encounter it. On an external drive, it'll ask you which OS you want to connect to. I think there's something in Parallels settings for the internal drive, but not sure.

How to install Photoshop Elements 12 on a new MacBook Pro which doesn't have a external drive.

I have the software for photoshop elements 12 but cannot install on my MacBook Pro because it doesn't have a external drive. How do I get it installed?

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Installing my CS6 onto my macbook pro that doesn't have a disc drive?

How do I install the CS6 program I bought onto my Macbook pro? It doesn't have a disk drive. I tried to download each individual trial version through Creative Cloud but then when I try to input my serial number, it says it's not a legitimate serial number but it's the one that was emailed to me.

Creative Cloud is not going to link the CS6 version of the software. Try the following page instead:
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html
If you continue to have issues with your serial number, you need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here are some links to help make contact:
http://www.adobe.com/support/chat/ivrchat.html
http://www.adobe.com/support/download-install/supportinfo/

My MacBook Pro can not find my internal hard drive.

My computer does come on. And I have a MacBook Air 2009. Just some history, my computer froze on me one day. So I restart it and a screen with a folder and question mark showed up. So I called apple and got some trouble shooting done. Nothing worked. So they ended up sending me another installer disk. And that did not work. Could not find my internal hard drive. So I took it to a apple store and the guy who looked at it told me that it was water damaged and would cost $700 to fix. So I pushed it to the side for year and decided to take a further look into it recently. And found some information where people had the same issue and was advices their hard drive could be dead. So I'm thinking about getting a 2nd opinion and taking it some where else. I'm just wondering could I really just replace my hard drive and be fine with my computer? If its really water damaged wouldn't it not work? Does replacing the hard drive cost a lot to do?

Its extremely unlikely your HD is water damaged, everything on your internals in your macbook Pro would FRY long before water seeped its way into your HD,....the HD circuitry on the outside of the HD however is another story.
If your computer IS in fact water damaged, then yes, replacing the hard drive wouldnt fix anything.
Replacing the HD yourself , IF your HD is dead and at fault, can be done by yourself easily and cost around $65.
In any regard, on a 2009 computer....., 700$ could buy you a nice MUCH NEWER and faster like new refurbished MAC,........as such it would be best not to consider such an option.

My Macbook pro isn't detecting my internal hard drive?

So basically I accidentally dropped my macbook, no major physical bumps or dents, but I just can't boot.
I have the 13 inch baseline 2012 macbook pro, when I turn on my macbook, I can hear the chime, gray screen, and the apple boot sound, but after that nothing. I tried to go for internet recovery, and I noticed that my Hard Drive is not detected, super drive etc still in place. Im thinking to try taking the macbook to the apple store later on, however do you think it would be wise to try unscrewing the back plate of the macbook, and taking the hdd and puting it back to see if it works?
I'm currently posting this with the mac itself through the internet recovery thing, but I just can't reinstall my lion now.

Make a bootable USB recovery drive and boot to that to then reinstall the OS X system. At least that way you can tell if there's even a hard drive mounted still. I wouldn't recommend opening the MBP up until absolutely necessary.

How do I reboot my Macbook pro 2011 to a new internal hard drive?

I had to get a new internal hard drive and I can't afford to pay some one to do it for me. So I was wondering how do I install the operating system on to the hard drive?
Thanks

Since we don't know which MBP you have or what OS was initially installed on it, try this. Start up the Mac and hold down the Command and "R" keys. If you have an internet connection and if the MBP came with Lion installed, you should be able to boot into Internet Recovery. From there, you can download Lion from Apple's servers and install it. That's assuming the new HD has already been installed and formatted (you can format it yourself using the Disk Utility that's available in Internet Recovery).

MacBook Pro Retina doesn't show correct colour spectrum

I'm having trouble with my late 2013 13" MBPr display, it's displaying low colour spectrum, something like 16 bit colours. I took a photo of my screen right now, and it display something like this. As you can see the cat colour look really washed out and the spectrum doesn't look smooth at all.
Compare to this screen capture that I took (using ctrl-cmd-shift-4), you can see the cat colour is more "life" and the colour spectrum is smooth (I send the screenshot to my iPhone to make sure the screen capture have correct colours).
It's happen after I do an airplay mirroring using Apple TV that connected to HDMI to VGA adapter to my projector. I never do that before, as my apple tv usually connected to my TV.
This are what I already did after that thing happens: reset the NVRAM, try to reconfigure colour profile, restart my MBPr, and nothing happens. But when I try to mirroring either using airplay or direct hdmi connection, the display in other screen are perfectly normal while the display in my MBPr still washed out.
Any one can help?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.

Macbook Pro Retina doesn't see internal SSD drive

Similar Messages

Maybe you are looking for