Macbook Pro Retina EFI Update 1.0 will not remove from Updates.

Why does the Macbook Pro Retina EFI Update 1.0 constantly remain in the Updates,  I have installed it 10 times now but every time I check for Updates it says its available for me to download,  I thought the Updates were removed once installed?

System Software Overview:
  System Version:          OS X 10.8.2 (12C54)
  Kernel Version:          Darwin 12.2.0
  Boot Volume:          Macintosh HD
  Boot Mode:          Normal
  Computer Name:          Stathis’s MacBook Pro
  User Name:          Stathis Bovolis (stathis)
  Secure Virtual Memory:          Enabled
  Time since boot:          10 minutes
Is this what you are after? Sorry I am new to Macs, know where to find System Info not too sure about Boot ROM

Similar Messages

  • MacBook Pro Retina EFI Update 1.0 taking a long time

    Does the MacBook Pro Retina EFI Update 1.0 take a long time - mine is just saying "Waiting..." after 20 minutes. Updating from the App Store. Thanks

    hi,  i wasnt able to find the EFI update in my App store. My computer is also MBPro Retina Mid 2012.
    would you mind telling me your boot rom version after you successfully installed this EFI updated? (Anyone?)
    mine is:
    Boot ROM Version:          MBP101.00EE.B02
    Although i dont remember installing this EFI update. After I installed 10.8.2,  i was only able to see the iphoto update, and
    after that,  nothing.   Until now, there's no update from App Store.

  • MacBook Pro (Retina, 15-inch, Mid 2014) will not read an SD card in the SDXC card reader. Does anyone know whats going on?

    MacBook Pro (Retina, 15-inch, Mid 2014) will not read an SD card in the SDXC card reader. Does anyone know whats going on?

    Hi David.  I don't have as modern a Macbook Pro as you, mine is a 2012 model, but perhaps I can help.  I often find that my SD card will not load when I first insert it.  I have to remove it and then put it into the slot again firmly.
    You also haven't posted any information about the SD card.  What size is it, do you know how it is formatted, has it worked in that same mac previously, where did it come from, does it currently work in another device (such as your camera)?  This sort of information will help to narrow down the problem.
    If you post some more information I'm sure people will try to help you.  In the meantime, if you look at your post again you should see "More Like This" at the bottom of the page and you may find an answer in some of those related posts.
    Hope that helps.
    Ivan

  • Macbook pro retina efi update 1.0 keeps coming in updates after install

    Hi guys,
    I installed the above update a couple of days ago but it keeps coming up in my updates on the App Store. Anyone experiencing the same or anyuone understands why this is happening?
    Thanks
    Stathis

    System Software Overview:
      System Version:          OS X 10.8.2 (12C54)
      Kernel Version:          Darwin 12.2.0
      Boot Volume:          Macintosh HD
      Boot Mode:          Normal
      Computer Name:          Stathis’s MacBook Pro
      User Name:          Stathis Bovolis (stathis)
      Secure Virtual Memory:          Enabled
      Time since boot:          10 minutes
    Is this what you are after? Sorry I am new to Macs, know where to find System Info not too sure about Boot ROM

  • Macbook Pro Retina EFI update 1.2 doesn't clear from software update list after installing

    I've had this problem for a few weeks.
    I install the update via the App Store, the system restarts, but afterwards I get a notice from the App Store that the same update needs to be installed. If I look further down the list of installed items it does record the update as being installed, but I'm not sure if it was really installed.
    Note: I have tried to install the update manually w/o the App Store, but I still get a notice from the App Store after restart that the update needs installing.
    This isn't  huge deal, but it's kind of annoying that I'm not sure if the update was installed or not, and frankly, my OCD kicks in whenever I see that this update is still not clearing from the list of items to be installed.
    By the way, the update has to do with the nvidia card not losing performance after the computer wakes up.
    Thank you

    Hi there
    However, I spoke to Apple and was  given the following advice:
    ==
    Thank you for contacting Apple.
    Based on the details you provided, we think you might find the following information helpful:
    OS X Mavericks: Reset your computer's PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Sincerely,
    Apple Support
    ==
    Try resetting the PRAM and please report if the freezing trackpad happens again. Please post in the following thread:
    https://discussions.apple.com/message/23775003?ac_cid=tw123456#23775003

  • MacBook Pro Retina SMC Update 1.1 Won't Install

    Hi Everybody. I am having a really annoying problem with my rMBP. I have the update labaled: "MacBook Pro Retina SMC Update 1.1" Available in my Mac AppStore app. After I click update, I get a prompt letting me know that the laptop needs to be plugged in, I hit ok. It downloads (very small file) and asks me to Restart or hit "Not Now". I click restart, the system reboots into a updating page where a status bar quickly completes. The laptop restarts again back to OSX. I open up the appstore and goto the updates page and what do I see? 1 available update: MacBook Pro Retina SMC Update 1.1, like I never did anything to begin with.
    My system info is:
    Model Name:          MacBook Pro
      Model Identifier:          MacBookPro10,1
      Processor Name:          Intel Core i7
      Processor Speed:          2.6 GHz
      Number of Processors:          1
      Total Number of Cores:          4
      L2 Cache (per Core):          256 KB
      L3 Cache:          6 MB
      Memory:          8 GB
      Boot ROM Version:          MBP101.00EE.B02
      SMC Version (system):          2.3f32
      Serial Number (system):          xxx
      Hardware UUID: xxx
    Please help this is really annoying.

    I had the same problem. Tried all the proposed fixes. Nothing worked. This solved my problem:
    1. Install a fresh copy of mountain lion on an extern disk
    2. Startup from that disk
    3. Update to 10.8.3.
    4. Restart
    5. Open app store, go to updates. You should see the SMC 1.1. update.
    6. Click update
    7. Restart
    Once the update installed (fan will go quickly to max speed during startup) switch back to your internal disk and start up. Now the SMC 1.1. update shouldn't show up in the app store/upadtes.

  • TS4088 I have a MacBook pro that has power issues and will not start but the hardrive is fine.  I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase o

    I have a MacBook pro that has power issues and will not start but the hardrive is fine.  I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one?  Also, the software is not updated as the computer hasn't worked for about 2 months. 
    Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well?  It is not saved in the cloud.
    Thanks for your help, it is much appreciated.

    You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
    But it would be a mistake to simply put the old HD in the new computer.
    These are the steps:
    Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
    Put it in a cheap enclosure
    Connect it the new computer
    Boot up new computer.
    If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
    Obviously chose the second option (another HD connected to this Mac) and follow prompts.
    If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
    Message was edited by: Mike Boreham...added sec on line

  • Just purchased call of duty 4 on my macbook pro 10.6.8 4GB but will not launch or open. Any suggestions, please.

    just purchased call of duty 4 on my macbook pro 10.6.8 4GB but will not launch or open. Any suggestions, please.

    Installing the Mac OS X 10.6.8 Update Combo will reinstall the App Store for you. Restart your Mac after the combo is installed. It's ok to do this even though you are already running v10.6.8. Then try launching the app.
    if that doesn't help, try contacting the developer of the app >  http://support.aspyr.com/home

  • Every time my MacBook Pro is put to sleep, it will not connect to the internet when reopened unless diagnostic assistant is performed. Ridiculous!

    Every time my MacBook Pro is put to sleep, it will not connect to the internet upon reopening unless I perform diagnostic assistant.

    Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
    1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
    Remember networks this computer has joined
    is checked.
    2. Follow the instructions in this support article under the heading
    Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
    3. Reset the PRAM.
    4. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    5. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
    6. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
    7. Repair permissions on the startup volume.
    8. Turn off Bluetooth and test.
    9. Reset the System Management Controller.
    10. Reinstall OS X.

  • I have had my macbook pro for 3 days, and it will not charge.  I tried several differnt outlets, tried cleaning and wiggling the magnet charger, still nothing.  Has this happened to anyone else? Any suggestions?

    Has this happened to anyone else?

    Jaybunni wrote:
    I have had my macbook pro for 3 days, and it will not charge.
    You have 14 days from the date of purchase to return your MBP.  Personally, I would not waste my time "troubleshooting" if the normal solutions do not work.
    Return the MBP for one that works before your 14 days are up and/or call AppleCare ASAP!!!
    Good luck!

  • After upgrading my MacBook Pro, my 3rd generation i-pad will not charge.  It says the accessory (the charger) may not be supported.

    After upgrading my MacBook Pro, my 3rd generation i-pad will not charge.  The device says, "this accessory (the charger) may not be supported.  My i-phone 5 charged just fine.  Thanks.

    iPad: Charging the battery
    - Try another cable.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    Also, this is the MacPro desktop forum. I requested your post be moved to the MacBook Pro forum

  • My Macbook pro OS 10.10.2 suddenly will not communicate with my Cannon MX890 printer.  I reset all printers and now I cannot seem to add a printer by using the Add a printer function.  Ideas?

    My Macbook pro OS 10.10.2 suddenly will not communicate with my Cannon MX890 printer.  I reset all printers and now I cannot seem to add a printer by using the Add a printer function.  Ideas?

    The appearance of the printer in the Default view of the Add printer window relies on a protocol called Bonjour. There have been quite a few users who upgraded to Yosemite only to find that their wifi printer is no longer visible. Until Apple resolves this issue you can add your printer using the LPD protocol. To do so you will need to determine the IP address being used by the MX890. This can be done via the touch panel under Device Settings > Network Settings.
    Once you learn the IP address then on the Mac you can click to add the printer and select the IP icon. Here you can enter the IP address, set the Protocol to Line Printer Deamon and leave the Queue field blank. Then change the name to Canon MX890 and in the Use menu, browse for the Canon MX890 series driver. Then click Add to complete the printer creation.

  • IPad not backed up icon will not remove from screen

    iPad not backed up icon will not remove from screen

    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • I just bought my iphone5c on ebay, but the previous owner will not remove from their account, what do i do?

    I just bought my iphone5c on ebay, but the previous owner will not remove from their account, what do i do?

    You won’t be able to use it. Ask eBay for a refund.
    (120398)

  • Can macbook pro retina display updated intel driver,using safari?How?

    Hi!how are you ?my name is Chong Hooi Chang,i live in malaysia.i have buy macbook pro retina display,the macbookpro retina display inside have intel HD Graphics 4000,it this need go to intel web site (The Intel Driver Update Utility Installation)update intel HD Graphics 4000 or not,just software update only?i have go to intel web site updated using safari but it show me this message [http://intel-drv-ws.systemrequirementslab.com The Intel Driver Update Utility Installation failed. Possible web browser compatibllity,firewall or installation issue detected.]i already install Java!How can update Intel Driver using safari?How can solve this problem?thank you your help.

    After the display is detected, you can go to sytem preferences>displays, click the arrangements tab and unchrck mirrioring you can then drag a pane to the external monitior, the window in the arrange pane with the white border on the top will be the one on your built in the other will be the one you can drag. You can select which way to drag it by moving the postion of the non white top bordered window to the left or right of the "static" one.
    Also you can click "show diplays in menu bar" and it will put an icon there that you can use to change display prefes without having to go to syst prefes.
    Hope this helps

Maybe you are looking for