Macbook Pro Retina GeForce 650M Cuda Crash (Important Information for Mac Users)

Over the past 4 months, I've experience random Open CL issues with PR CC and also complete computer shutdowns with PR CC using Cuda acceleration. In this time, both Adobe and Apple have looked at my computer. Apple has replaced the Logic Board and the graphic cards and the same issue is still present.
The issue is still very much present! It appears to be solely hardware related. A typical response from the Macbook Pro Retina is that the video image will appear briefly and then disappear in the video monitor. Next, the computer will completely crash and restart or if I am lucky the program will shut down and display an error message, "A serious graphic issue has been detected."
For your sack and mine, I hope we can come together to solve this issue.
Sincerley,
Levi

I'm in the exact same boat, idareu2mov. I got a new MBP Retina with OSX 10.8 Mountain Lion preloaded, downloaded the latest Nvidia Cuda driver 5.0.24, edited the TXT files to accept the GeForce GT 650M video card, opened up After Effects CS6 11.0.0 and BAM! I got the error on start up:
"After Effects error: Ray-traced 3D: Initial shader compile failed. ( 5070 :: 0 )"
When I go into my After Effects > Preferences > Previews settings, I now have the ability to switch between CPU and GPU, which is new since I updated the TXT file to accept my video card.
What's strange is that if I set the Previews setting to CPU, then restart AE, I don't get the error. When I turn on GPU while in AE, still no error. But if I leave the GPU setting on and restart AE, up pops the error again.
I've been to the end of the internet and back and haven't found a solution yet. The latest advice is to update to AE CS6 11.0.1. Hopefully that will fix the error.
Does anyone have any other suggestions?

Similar Messages

Fall 2013 Macbook Pro Retina screen freezing and crashing

Hello,
lately, I have been experiencing some screen freezes on my Macbook Pro Retina 15''... The screen just freezes, including the mouse pointer and then it doesn't respond to anything. I just have to restart the machine again. This happens sometimes and not every day, but still a few times a week. I just do normal things on my mac while I get this problem.
Also, just recently almost an hour ago, my screen just turned all white and it said "Your computer restarted because of a problem. Press any key to continue or a wait a couple minutes for it to reboot." This time, I was watching a movie when it happened.
I have also verified the disk in disk utility, but no errors.
What may be causing this issue? Hardware? Software? I also have applecare, but I'm eager to find out what's the problem before I hand it to the apple store.
Thank you very much!
This is the kernel panic log:
Sun Mar 30 04:45:42 2014
panic(cpu 0 caller 0xffffff8011adbe2e): Kernel trap at 0xffffff8011aa3319, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x00007fff7bee0000, CR3: 0x0000000065fc904e, CR4: 0x00000000001606e0
RAX: 0x0000000000000001, RBX: 0xff000000ff000000, RCX: 0xffffff8035100450, RDX: 0x0000000000000821
RSP: 0xffffff81e5a63d20, RBP: 0xffffff81e5a63d50, RSI: 0x0000000026a74e9c, RDI: 0xffffff80184f9800
R8: 0x0000000000000000, R9: 0xffffff81e5a63ed0, R10: 0x00007fff5650aee0, R11: 0x00000000ffffffe5
R12: 0xffffff80184f9800, R13: 0xffffff80164be000, R14: 0x00000000000e0000, R15: 0xffffff80449d7f40
RFL: 0x0000000000010286, RIP: 0xffffff8011aa3319, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0x00007fff7bee0000, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff81d3e5bc50 : 0xffffff8011a22fa9
0xffffff81d3e5bcd0 : 0xffffff8011adbe2e
0xffffff81d3e5bea0 : 0xffffff8011af3326
0xffffff81d3e5bec0 : 0xffffff8011aa3319
0xffffff81e5a63d50 : 0xffffff8011a7804e
0xffffff81e5a63f20 : 0xffffff8011adc26c
0xffffff81e5a63fb0 : 0xffffff8011af322b
BSD process name corresponding to current thread: launchdadd
Mac OS version:
13C64
Kernel version:
Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide:
0x0000000011800000
Kernel text base: 0xffffff8011a00000
System model name: MacBookPro11,3 (Mac-2BD1B31983FE1663)
System uptime in nanoseconds: 24365483293442
last loaded kext at 17612576328462: com.apple.driver.AppleIntelMCEReporter
104 (addr 0xffffff7f9414b000, size 49152)
last unloaded kext at 17672593992681: com.apple.driver.AppleIntelMCEReporter
104 (addr 0xffffff7f9414b000, size 32768)
loaded kexts:
com.Cycling74.driver.Soundflower
1.5.3
com.apple.filesystems.smbfs
2.0.1
com.apple.driver.AppleHWSensor
1.9.5d0
com.apple.filesystems.autofs
3.0
com.apple.driver.X86PlatformShim
1.0.0
com.apple.driver.AGPM
100.14.15
com.apple.driver.ApplePlatformEnabler
2.0.9d1
com.apple.iokit.IOBluetoothSerialManager
4.2.3f10
com.apple.driver.AppleHDA
2.6.0f1
com.apple.GeForce
8.2.4
com.apple.driver.AppleUpstreamUserClient
3.5.13
com.apple.driver.AudioAUUC
1.60
com.apple.driver.AppleIntelHD5000Graphics
8.2.4
com.apple.driver.AppleCameraInterface
4.26.0
com.apple.iokit.IOUserEthernet
1.0.0d1
com.apple.Dont_Steal_Mac_OS_X
7.0.0
com.apple.driver.AppleHWAccess
1
com.apple.driver.AppleThunderboltIP
1.1.2
com.apple.driver.AppleLPC
1.7.0
com.apple.driver.AppleSMCLMU
2.0.4d1
com.apple.driver.AppleIntelFramebufferAzul
8.2.4
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport
4.2.3f10
com.apple.driver.AppleMuxControl
3.4.35
com.apple.driver.AppleMCCSControl
1.1.12
com.apple.driver.AppleUSBTCButtons
240.2
com.apple.driver.AppleUSBTCKeyboard
240.2
com.apple.driver.AppleUSBCardReader
3.4.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless
1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib
1.0.0d1
com.apple.BootCache
35
com.apple.driver.AppleUSBHub
666.4.0
com.apple.driver.XsanFilter
404
com.apple.iokit.IOAHCIBlockStorage
2.5.1
com.apple.driver.AppleAHCIPort
3.0.0
com.apple.driver.AirPort.Brcm4360
831.21.63
com.apple.driver.AppleUSBXHCI
670.4.0
com.apple.driver.AppleSmartBatteryManager
161.0.0
com.apple.driver.AppleRTC
2.0
com.apple.driver.AppleACPIButtons
2.0
com.apple.driver.AppleHPET
1.8
com.apple.driver.AppleSMBIOS
2.1
com.apple.driver.AppleACPIEC
2.0
com.apple.driver.AppleAPIC
1.7
com.apple.nke.applicationfirewall
153
com.apple.security.quarantine
3
com.apple.kext.triggers
1.0
com.apple.iokit.IOSerialFamily
10.0.7
com.apple.driver.DspFuncLib
2.6.0f1
com.apple.vecLib.kext
1.0.0
com.apple.iokit.IOAcceleratorFamily
98.14
com.apple.iokit.IOAudioFamily
1.9.5fc2
com.apple.kext.OSvKernDSPLib
1.14
com.apple.iokit.IOSurface
91
com.apple.iokit.IOBluetoothFamily
4.2.3f10
com.apple.driver.AppleHDAController
2.6.0f1
com.apple.iokit.IOHDAFamily
2.6.0f1
com.apple.nvidia.driver.NVDAGK100Hal
8.2.4
com.apple.nvidia.driver.NVDAResman
8.2.4
com.apple.AppleGraphicsDeviceControl
3.4.35
com.apple.iokit.IOAcceleratorFamily2
98.14
com.apple.iokit.IOBluetoothHostControllerUSBTransport
4.2.3f10
com.apple.driver.X86PlatformPlugin
1.0.0
com.apple.driver.AppleSMC
3.1.8
com.apple.driver.IOPlatformPluginFamily
5.7.0d10
com.apple.driver.AppleGraphicsControl
3.4.35
com.apple.driver.AppleBacklightExpert
1.0.4
com.apple.iokit.IONDRVSupport
2.4.1
com.apple.driver.AppleSMBusController
1.0.11d1
com.apple.iokit.IOGraphicsFamily
2.4.1
com.apple.driver.AppleUSBMultitouch
240.9
com.apple.iokit.IOSCSIBlockCommandsDevice
3.6.6
com.apple.iokit.IOUSBMassStorageClass
3.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily
3.6.6
com.apple.driver.AppleUSBMergeNub
650.4.0
com.apple.iokit.IOUSBHIDDriver
660.4.0
com.apple.driver.AppleUSBComposite
656.4.1
com.apple.driver.AppleThunderboltDPInAdapter
3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily
3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter
1.4.5
com.apple.iokit.IOUSBUserClient
660.4.2
com.apple.iokit.IOAHCIFamily
2.6.5
com.apple.driver.AppleThunderboltNHI
2.0.1
com.apple.iokit.IOThunderboltFamily
3.2.7
com.apple.iokit.IO80211Family
630.35
com.apple.driver.mDNSOffloadUserClient
1.0.1b5
com.apple.iokit.IONetworkingFamily
3.2
com.apple.iokit.IOUSBFamily
675.4.0
com.apple.driver.AppleEFINVRAM
2.0
com.apple.driver.AppleEFIRuntime
2.0
com.apple.iokit.IOHIDFamily
2.0.0
com.apple.iokit.IOSMBusFamily
1.1
com.apple.security.sandbox
278.11
com.apple.kext.AppleMatch
1.0.0d1
com.apple.security.TMSafetyNet
7
com.apple.driver.AppleKeyStore
2
com.apple.driver.DiskImages
371.1
com.apple.iokit.IOStorageFamily
1.9
com.apple.iokit.IOReportFamily
23
com.apple.driver.AppleFDEKeyStore
28.30
com.apple.driver.AppleACPIPlatform
2.0
com.apple.iokit.IOPCIFamily
2.9
com.apple.iokit.IOACPIFamily
1.4
com.apple.kec.pthread
1
com.apple.kec.corecrypto
1.0
System Profile:
Model: MacBookPro11,3, BootROM MBP112.0138.B02, 4 processors, Intel Core i7, 2.6 GHz, 16 GB, SMC 2.19f3
Graphics: Intel Iris Pro, Intel Iris Pro, Built-In, 1024 MB
Graphics: NVIDIA GeForce GT 750M, NVIDIA GeForce GT 750M, PCIe, 2048 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x000000000000000000000000000000000000
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x000000000000000000000000000000000000
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x134), Broadcom BCM43xx 1.0 (6.30.223.154.63)
Bluetooth: Version 4.2.3f10 13477, 3 services, 15 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM0512F, 500,28 GB
USB Device: Internal Memory Card Reader
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus: MacBook Pro, Apple Inc., 17.1

Looks like a RAM issue.
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x000000000000000000000000000000000000
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x000000000000000000000000000000000000

MacBook Pro Retina (Mid-2012) Yosemite: Crashing VERY Frequently. Often While Loading Webpages. I believe is a Graphics-Card Switching issue. Have tried trouble shooting: "Disable Automatic Graphics Switching" and "Reduced Transparency" no luck

I believe I am experiencing the problems discussed in this article: http://www.macnn.com/articles/14/11/04/several.support.threads.discussing.issue. related.to.gpu.switching/
However I am not sure. I am not that tech savvy... Anyway my computer is becoming unusable. Its truly driving me crazy. Its worth noting that I would have this problem OCCASIONALLY while running Mavericks, since the update it has become far me frequent: Computer Restarts shows message "you computer has restarted because of a problem" or sometimes my screen just goes black, the sound still plays. Pasted below is the error report. Can anyone tell me, do I have the common problem as discussed in the article or something else? I have had this machine for about 18 months, already had to replace the SSD, now this. It looks like I maybe on my way to having a $3k paperweight.   Please help!
Anonymous UUID: BE42D0F0-B5F9-BC04-6475-B64036043957
Thu Nov 13 00:02:31 2014
*** Panic Report ***
panic(cpu 0 caller 0xffffff7fa5e90f63): "GPU Panic: [<None>] 5 0 a0 d9 9 8 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x104000000 0xffffff8212ed8000 0x0e7150a2, D0, P1/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.7.21/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff820ec22a30 : 0xffffff802333a811
0xffffff820ec22ab0 : 0xffffff7fa5e90f63
0xffffff820ec22b90 : 0xffffff7fa3fd0d28
0xffffff820ec22c50 : 0xffffff7fa409b1b6
0xffffff820ec22c90 : 0xffffff7fa409b226
0xffffff820ec22d00 : 0xffffff7fa42d2d7e
0xffffff820ec22d90 : 0xffffff7fa42ea50b
0xffffff820ec22dd0 : 0xffffff7fa4113a13
0xffffff820ec22e00 : 0xffffff7fa411399d
0xffffff820ec22e30 : 0xffffff7fa4221c9f
0xffffff820ec22e60 : 0xffffff7fa4223971
0xffffff820ec22f00 : 0xffffff7fa4223f38
0xffffff820ec22f80 : 0xffffff7fa3fe5bbf
0xffffff820ec22fd0 : 0xffffff7fa422806a
0xffffff820ec23130 : 0xffffff7fa42285fa
0xffffff820ec231b0 : 0xffffff7fa40d2bee
0xffffff820ec23380 : 0xffffff7fa40d178f
0xffffff820ec233c0 : 0xffffff7fa40e18f8
0xffffff820ec23420 : 0xffffff7fa40e257b
0xffffff820ec234e0 : 0xffffff7fa3fbb807
0xffffff820ec23510 : 0xffffff7fa3fbaf09
0xffffff820ec23530 : 0xffffff7fa3fbb894
0xffffff820ec23570 : 0xffffff7fa3fbad5f
0xffffff820ec23610 : 0xffffff7fa3fad2d5
0xffffff820ec236b0 : 0xffffff7fa3fd53a5
0xffffff820ec238b0 : 0xffffff7fa3fd638c
0xffffff820ec23990 : 0xffffff7fa41775fc
0xffffff820ec239e0 : 0xffffff7fa4177c80
0xffffff820ec23a90 : 0xffffff7fa416be63
0xffffff820ec23c60 : 0xffffff7fa3f8278b
0xffffff820ec23cf0 : 0xffffff7fa3f6bfc4
0xffffff820ec23d70 : 0xffffff7fa3f6ef9a
0xffffff820ec23db0 : 0xffffff7fa3f6e816
0xffffff820ec23e20 : 0xffffff7fa3f3381f
0xffffff820ec23e60 : 0xffffff7fa3f32b50
0xffffff820ec23e90 : 0xffffff7fa3f2ed33
0xffffff820ec23ef0 : 0xffffff80238d7162
0xffffff820ec23f40 : 0xffffff80238d507d
0xffffff820ec23f80 : 0xffffff80238d5146
0xffffff820ec23fb0 : 0xffffff80234192c7
      Kernel Extensions in backtrace:
com.apple.iokit.IONDRVSupport(2.4.1)[F4738C55-B507-3627-A9CA-3D29A5230A03]@0xff ffff7fa3f6a000->0xffffff7fa3f79fff
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7fa3f23000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7fa3b24000
com.apple.driver.AppleMuxControl(3.7.21)[32B7E2DE-1F9D-3555-B687-7A76A62B81D2]@ 0xffffff7fa5e82000->0xffffff7fa5e95fff
dependency: com.apple.driver.AppleGraphicsControl(3.7.21)[62689710-EEA7-307A-AC83-B8F25DA88 A6A]@0xffffff7fa5e7a000
dependency: com.apple.iokit.IOACPIFamily(1.4)[70E2B65E-A91A-3522-A1A0-79FD63EABB4C]@0xfffff f7fa4801000
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7fa3b24000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7fa3f23000
dependency: com.apple.driver.AppleBacklightExpert(1.1.0)[0183904C-6A16-32C4-9405-EEFD7F820B 02]@0xffffff7fa5e7d000
com.apple.nvidia.driver.NVDAResman(10.0)[53CC0E05-7382-336C-8239-AE884D6CA71A]@ 0xffffff7fa3f80000->0xffffff7fa41f5fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7fa3b24000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[F4738C55-B507-3627-A9CA-3D29A5230A03]@0xff ffff7fa3f6a000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7fa3f23000
dependency: com.apple.AppleGraphicsDeviceControl(3.7.21)[4700601D-3FEB-3B86-B2BA-8D71AF84D1 C4]@0xffffff7fa3f7a000
com.apple.nvidia.driver.NVDAGK100Hal(10.0)[DC43029D-568A-3B7C-976B-E922C17F5143 ]@0xffffff7fa4201000->0xffffff7fa43aefff
dependency: com.apple.nvidia.driver.NVDAResman(10.0.0)[53CC0E05-7382-336C-8239-AE884D6CA71A ]@0xffffff7fa3f80000
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7fa3b24000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide: 0x0000000023000000
Kernel text base: 0xffffff8023200000
__HIB text base: 0xffffff8023100000
System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
System uptime in nanoseconds: 242886238000
last loaded kext at 7305506356: com.apple.driver.AppleGraphicsDevicePolicy           3.7.7 (addr 0xffffff7fa5e9e000, size 45056)
last unloaded kext at 104051108832: com.apple.iokit.IOEthernetAVBController       1.0.3b3 (addr 0xffffff7fa4883000, size 28672)
loaded kexts:
com.avatron.AVExFramebuffer       1.7
com.parallels.virtualsound   1.0.27 27
com.avatron.AVExVideo        1.7
com.apple.driver.AppleHWSensor   1.9.5d0
com.apple.filesystems.autofs            3.0
com.apple.driver.AGPM        100.14.37
com.apple.driver.ApplePlatformEnabler    2.1.0d1
com.apple.driver.X86PlatformShim            1.0.0
com.apple.driver.AudioAUUC           1.70
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport           4.3.0f10
com.apple.iokit.IOBluetoothSerialManager            4.3.0f10
com.apple.driver.AppleMikeyHIDDriver     124
com.apple.driver.AppleOSXWatchdog        1
com.apple.driver.AppleMikeyDriver           266.5
com.apple.driver.AppleHDA 266.5
com.apple.driver.AppleUpstreamUserClient          3.6.1
com.apple.GeForce    10.0.0
com.apple.iokit.IOUserEthernet       1.0.1
com.apple.driver.AppleThunderboltIP       2.0.2
com.apple.Dont_Steal_Mac_OS_X      7.0.0
com.apple.driver.AppleIntelHD4000Graphics       10.0.0
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleSMCLMU     2.0.4d1
com.apple.driver.AppleMuxControl            3.7.21
com.apple.driver.AppleMCCSControl          1.2.10
com.apple.driver.AppleHWAccess   1
com.apple.driver.AppleHV    1
com.apple.driver.AppleSMCPDRC   1.0.0
com.apple.driver.AppleIntelFramebufferCapri     10.0.0
com.apple.driver.AppleUSBTCButtons        240.2
com.apple.driver.AppleUSBTCKeyboard    240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless      1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache            35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage           2.6.5
com.apple.driver.AppleUSBHub      705.4.1
com.apple.driver.AppleSDXC           1.6.5
com.apple.driver.AirPort.Brcm4360           900.19.8
com.apple.driver.AppleAHCIPort     3.0.7
com.apple.driver.AppleUSBEHCI     705.4.14
com.apple.driver.AppleUSBXHCI     705.4.14
com.apple.driver.AppleSmartBatteryManager      161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons           3.1
com.apple.driver.AppleHPET           1.8
com.apple.driver.AppleSMBIOS       2.1
com.apple.driver.AppleACPIEC        3.1
com.apple.driver.AppleAPIC            1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          218.0.0
com.apple.nke.applicationfirewall   161
com.apple.security.quarantine        3
com.apple.security.TMSafetyNet     8
com.apple.driver.AppleIntelCPUPowerManagement        218.0.0
com.apple.kext.triggers         1.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport            4.3.0f10
com.apple.iokit.IOSerialFamily         11
com.apple.driver.DspFuncLib          266.5
com.apple.kext.OSvKernDSPLib      1.15
com.apple.iokit.IOAudioFamily         200.6
com.apple.vecLib.kext           1.2.0
com.apple.nvidia.driver.NVDAGK100Hal    10.0.0
com.apple.nvidia.driver.NVDAResman        10.0.0
com.apple.iokit.IOBluetoothFamily 4.3.0f10
com.apple.iokit.IOSurface     97
com.apple.driver.AppleSMBusPCI   1.0.12d1
com.apple.driver.AppleBacklightExpert     1.1.0
com.apple.driver.AppleGraphicsControl     3.7.21
com.apple.driver.X86PlatformPlugin          1.0.0
com.apple.driver.AppleSMBusController    1.0.13d1
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.AppleHDAController        266.5
com.apple.iokit.IOHDAFamily           266.5
com.apple.iokit.IONDRVSupport      2.4.1
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.iokit.IOAcceleratorFamily2         156.4
com.apple.AppleGraphicsDeviceControl     3.7.21
com.apple.iokit.IOGraphicsFamily    2.4.1
com.apple.iokit.IOUSBUserClient     705.4.0
com.apple.iokit.IOSCSIArchitectureModelFamily   3.7.0
com.apple.driver.AppleUSBMultitouch       245.2
com.apple.iokit.IOUSBHIDDriver     705.4.0
com.apple.driver.AppleUSBMergeNub       705.4.0
com.apple.driver.AppleUSBComposite        705.4.9
com.apple.driver.CoreStorage          471
com.apple.driver.AppleThunderboltDPInAdapter            4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily    4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter     2.0.2
com.apple.driver.AppleThunderboltNHI    3.1.7
com.apple.iokit.IOThunderboltFamily         4.2.1
com.apple.iokit.IO80211Family       700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily           3.2
com.apple.iokit.IOAHCIFamily          2.7.0
com.apple.iokit.IOUSBFamily            705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime            2.0
com.apple.iokit.IOHIDFamily            2.0.0
com.apple.iokit.IOSMBusFamily       1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore     2
com.apple.driver.AppleMobileFileIntegrity            1.0.5
com.apple.driver.AppleCredentialManager           1.0
com.apple.driver.DiskImages           389.1
com.apple.iokit.IOStorageFamily      2.0
com.apple.iokit.IOReportFamily       31
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform         3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto     1.0
com.apple.kec.Libm   1
com.apple.kec.pthread          1
Model: MacBookPro10,1, BootROM MBP101.00EE.B05, 4 processors, Intel Core i7, 2.3 GHz, 16 GB, SMC 2.3f36
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF), Broadcom BCM43xx 1.0 (7.15.124.12.8)
Bluetooth: Version 4.3.0f10 14890, 3 services, 19 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: OWC Aura Pro rMBP, 480.1 GB
USB Device: Hub
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Hub
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus: MacBook Pro, Apple Inc., 23.4

Remove "Air Display" and see whether there's any change. If not, the logic board is faulty and must be replaced.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
Back up all data before making any changes.
You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

Thinking to buy a new 15inch macbook pro retina display. Aim to use it for video editing and compositing... Is ıt worth for it?

Hi... I am a freelance filmmaker. Now I have 2008 model mac pro and I am thinking to buy a new macbook pro 15 inch retina display. Do you think its worth for it? I aim to use the macbook mainly for video editing, video compositing (after effects) and photo editing. My current old mac pro has 12 GB and the graphics card is ATI Radeon HD 2600 XT 256 MB (Yes I still use it). My main question is, do you think its better to move to macbook pro or upgrading the old one? Making it 32 GB of RAM and buy a new NVIDIA cuda capable graphic card? I dont have enough budget to make it together... Want to hear your suggestions...

I'm not sure, I've seen pro animators use MBPs but usually with a large monitor. Especially doing video editing, compositing and editing it might make more sense to upgrade the Mac Pro to an SSD as the boot drive. What kind of CPU setup is in your Pro?
Check these out:
mac pro SSD upgrades?
SSD as system disk while users folder + data on HDD
Early 2008 8-Core Mac Pro GPU Upgrades
I deal exclusively with OWC. I'd call them and walk them through your system and see what they say.
What you do takes a lot of CPU, RAM, graphics and boot disk power.
I've upgraded my two computers to SSDs and the first thing I noticed was that Photoshop CS6 opens in 7 seconds vrs. 50 seconds when the application was on a HDD.

I transferred/migrated my files from my old 08 macbook 13" notebook to my new Macbook pro and now my Adobe programs and Microsoft for mac are not working. do I have to reinstall the programs?

I have recently purchased a new macbook pro, I had a macbook 13" notebook from 2008 and I trasnferred all of my files using the migration assistant. It said the transfer was completed and everything looked fine. but when I try to open my CS4 photoshop, illustrator, indesign or my microsoft for mac programs they crash. did the files not transfer correctly? do I have to reinstall them? do I need to wipe my mac and start again to clean out all of the transferred files?

If you still have your old MacBook, You can put the software installers in and image the discs using isk Utility and then copy them to your new MacBook Pro via a flash drive and install them from the disc images.
Another option is that you can connect it to your new mac in target Disk mode. Then you can use the DVD drive that is in the MacBook to install the software. To do this you would need a firewire cable plugged into your old MacBook and connect that to a Firewire to Thunderbolt adaptor that is connected to your new MacBook Pro.
Create a disk Image: https://support.apple.com/kb/ph5841
How to use Target Disk Mode:https://support.apple.com/kb/ht1661

Macbook pro starts up , opens bootcamp into win7, and all mac users except one

I have macbook pro that has always worked like a charm. Yesterday I started it and it opens to screen with choice of users. I clicked on my account and it went through motions and took me back to original screen. I checked and was able to pen all other accounts. I restarted and was able to open in windows as well. Logged in as another user with admin priveliges I created a new admin user. I was able to open locked admin functions with new account and password for account unable to open. I verified HD and permissions. Next thing will be to boot from system disk and repar permissions. Any ideas....Never seen anything like this in 20 years

I have macbook pro that has always worked like a charm. Yesterday I started it and it opens to screen with choice of users. I clicked on my account and it went through motions and took me back to original screen. I checked and was able to pen all other accounts. I restarted and was able to open in windows as well. Logged in as another user with admin priveliges I created a new admin user. I was able to open locked admin functions with new account and password for account unable to open. I verified HD and permissions. Next thing will be to boot from system disk and repar permissions. Any ideas....Never seen anything like this in 20 years

Buying a new MAcBook Pro - How do i move files and office for Mac

I am buying a new MacBook Pro and have a license for my office for Mac 2008. Can I re-install into the new computer or do i need to buy a new license? Also, how do i move all my itunes, photos, and files from one to the other!

Use TDM for transferring files, drag libraries into folders (iTunes Library into iTunes Folder for example). The Firewire cable will need to be a 6 to 9 pin, or an adapter.
If you're giving up the pB, De-authorize it for iTunes.
Don't do applications between G4 and Intel machines, better to reinstall.
Uninstall Office and use your key on the new Machine. Run Office update.
Connecting Your PowerBook to Another Computer Using FireWire Target Disk Mode.
If you want to transfer files between your PowerBook and another FireWire-equipped
Macintosh computer, or you have a problem that prevents your computer from starting
up, you can use FireWire Target Disk Mode to connect to another computer. When you
start up your computer in FireWire Target Disk Mode, the other computer can access
your PowerBook as if it were an external hard disk.
Note: When using FireWire Target Disk Mode, it’s a good idea to connect your power
adapter to the PowerBook.
To connect your PowerBook to another computer in FireWire Target Disk Mode:
1 Make sure that your PowerBook is shut down.
2 Use a FireWire cable to connect your PowerBook to another FireWire-equipped
computer.
3 Start up your PowerBook and immediately hold down the T key.
Your PowerBook display shows the FireWire logo. The other computer’s display shows
the PowerBook internal hard disk icon. You can now drag and drop files between the
computers.
4 When you finish transferring files, drag the PowerBook hard disk icon to the Trash.
5 Press the power button (®) on the PowerBook to shut it down, and then disconnect
the FireWire cable.
Joe

Mid-2012 Macbook Pro Retina GT 650m lagging

My Nvidia Geforce GT 650m has been acting up. When in use, it runs very slowly. The card is even slower than the integrated Intel HD Graphics 4000. As an example, I was playing minecraft and i tried playing using each card. Using the 650m i was receiving approximately 15fps, but the HD 4000 was giving me about 35 fps. I have tried reseting the SMC and PRAM with no success. I have also run hardware diagnostics which did not recognize any errors. Do you guys have any other suggestions? Thanks for any help provided

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I just bought a macbook pro and am ready to order Microsoft Office for Mac. I use Windows 2007 at work and want to be sure I am able to work with files from that system. Do I need to buy 2 different editions of Microsoft Office to be able to do this?

Do I need to buy 2 different Microsoft Office products if I want to be able to use my new Mac with Microsoft Office for Mac and also use files saved on my work computer which uses Microsoft Window 2007?

Pomme4us wrote:
Do I need to buy 2 different Microsoft Office products if I want to be able to use my new Mac with Microsoft Office for Mac and also use files saved on my work computer which uses Microsoft Window 2007?
Sorry, but your likely going to have to use Windows 7 and Office on your Mac at work using Bootcamp.
Although you can share files OfficeMac and Office on Windows, the formatting will be off because two platforms use different installed fonts and formatting. This will cause a productivity lost and require extra editing at work
If you could share just PDF's then your fine, but that will unlikely be the case.
So to share files seamlessly your going to have to install Windows 7 (another $300) full version, 64 bit, using Apple's Bootcamp.
https://www.apple.com/support/bootcamp/
It's ok, though, you can boot into OS X to use that online and surfing etc at home. It's the internet and sharing of files from other Windows users that cause Windows to hoze up, so mimimalize both of those and you should be fine.
You can also run Windows 7 in a virtual machine software like Parallels or VMFusion. as long as you don't have any super demanding needs of the hardware, like running 3D games or super intense CPU actions like video processing. Office work is just fine and it's safer than Bootcamp, as in a virtual machine you can keep "snapshots" of previous states of the OS, and revert back to in case something goes wrong in mere seconds.
A real good piece of news though, Windows 8 is so radically changed from Windows 7, that your workplace will remain with Windows 7 as long as possible to put off all the retraining necessary with that new OS version.
So think of the $300 + $60 investment in Windows on your Mac as a longterm thing.

Just bought a new MacBook Pro Retina 15" and am wondering what my best solution for managing Word files would be?

Having been used to my PC Laptop and needing to generate and read Word documents - and the occasional Excel and Powerpoint files - I need to get a better solution for dealing with these on my new MacBook Pro Retina 15".
Should I buy Office for Mac? if so, which version?
Or is there a better way?

Why not try Open Office? It's free and file compatible with MS Office.
http://www.openoffice.org

New Macbook Pro Retina 15inch is showing up as 1.9months old with 2 cycles on 'Battery Health'!?

Hi,
I've just recieved my New Macbook Pro Retina 15inch and installed 'Battery Health', but for some reason it is is showing my Macbook as 1.9months old with 2 cycles!? This Macbook isn't even a day old.. Is this normal!?
Please advise..
Thanks,
P

That is not unusual. Note that the actual maximum charge is well above the designed level which is the most important criteria.
Ciao.

How can I adjust the contrast of video on my MacBook Pro Retina so they don't look like they were filmed with an old sock over the lens?

I'd like to watch movies and TV shows, downloaded from iTunes or Amazon, on my MacBook Pro Retina, but they all look like they were filmed with an old sock over the lens. Daytime sequences look muddy, and night time sequences are incomprehensible with anything but the brightest objects rendered as black. I can watch the same files on my old MacBook Air and everything looks right, but no manner of tweaking seems to let me watch movies on my new machine.
I've tried adjusting the gamma. It's a bit better when gammas is set to 1.0, but I can't seem to set a gamma less than one. I tried using the Accessibility Contrast control, but it just lowers the contrast, swallowing my desktop into the dark abyss. I tried Applecare, but they don't have a clue. I tried the Apple Store. The "genius" confirmed that it is indeed impossible to watch movies shot anywhere but in the brightest sunlight on a MacBook Pro Retina, and it isn't just my machine, but every similar model in the store. He arranged for someone who really understands color profiles to give me a call, but Apple seems to have dropped the ball on this.
Is there some tool for stretching out the darker grays in Apple video? I don't want calibration. My impression is that my display, like the dozens I checked at the Apple Store are calibrated to make all dimmer grays appear completely black. I want uncalibration so I can actually see what is going on in the movies even if something is in a light shadow or shot at night. Hollywood has lots of trained technicians who can light and shoot night scenes that are quite comprehensible. I've watched a number of such scenes on my old MacBook Air. Now, I'd like to enjoy their artistry on my MacBook Pro Retina.

http://www.ifixit.com/ has directions for do it yourself. Also look at PRAM battery instructions, as sometimes this can fix optical drive issues.
You can get external or internal drives from http://www.macsales.com/
I also suggest in the future, take care of this problem while it is still under warranty. It may have cost you nothing.
See this FAQ* on what may be at issue:
http://www.macmaps.com/cdrfailure.html

MacBook Pro Retina SMC Update 1.1 Won't Install

Hi Everybody. I am having a really annoying problem with my rMBP. I have the update labaled: "MacBook Pro Retina SMC Update 1.1" Available in my Mac AppStore app. After I click update, I get a prompt letting me know that the laptop needs to be plugged in, I hit ok. It downloads (very small file) and asks me to Restart or hit "Not Now". I click restart, the system reboots into a updating page where a status bar quickly completes. The laptop restarts again back to OSX. I open up the appstore and goto the updates page and what do I see? 1 available update: MacBook Pro Retina SMC Update 1.1, like I never did anything to begin with.
My system info is:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro10,1
Processor Name:          Intel Core i7
Processor Speed:          2.6 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          6 MB
Memory:          8 GB
Boot ROM Version:          MBP101.00EE.B02
SMC Version (system):          2.3f32
Serial Number (system):          xxx
Hardware UUID: xxx
Please help this is really annoying.

I had the same problem. Tried all the proposed fixes. Nothing worked. This solved my problem:
1. Install a fresh copy of mountain lion on an extern disk
2. Startup from that disk
3. Update to 10.8.3.
4. Restart
5. Open app store, go to updates. You should see the SMC 1.1. update.
6. Click update
7. Restart
Once the update installed (fan will go quickly to max speed during startup) switch back to your internal disk and start up. Now the SMC 1.1. update shouldn't show up in the app store/upadtes.

Macbook pro retina display white spot(LCD Mura)

i have a macbook pro retina mid 2012 and i was traveling for 9 months and i had this problem for a while that my screen has a 2 bright white spots on the lower left quadrant of the screen it is an LG display and i researched online and people seem to be calling it an LCD mura. My macbook is out of warranty but i was wondering whether apple will replace the screen or not since it is a very common problem

Hello!
I bought mine in July 2012 and hadn't noticed any white spots until around December. I though maybe it was some problem with Firefox since I could only see it when surfing on internet but then one day I changed the background and realized that it was visible, as you say, on a light background. There I didn't see it on Lr od Ps.
I called yesterday to Apple (they don't have shops here in Oslo where I am located now) and tehy told me to go to the Authorized Service Provider.
I went this morning and they will change the screen for free as it is less than 1-year old. But recommended me to pay for the Apple Care... mmmhh...
I asked if he had seen these spots on more rMBP and he confirmed it. He had seen more although he couldn't tell me if it was a weakness of the Retina-screens..
Would be nice to know..
Do I have to start saving for the new replacement-screens to come?!
...until further notice I'll be 2 weeks without my beloved rMBP and my Adobe friends...

Macbook pro retina - Sennheiser mm450 bluetooth pairing problem

Sorry people but have, with surprise, comunicate a bluetotth pairing problem of my Sennheiser MM450 bluetotth headset with my new macbook pro retina 15".
No headset detected by may mac.
No problems with other bluetooth devices and this macbook.
No problems with this headset and iphone or other computer.
I'm very disapointed.
Hope to have some suggestion for solve the problem
Thanks

It may be necessary to turn on the aptX codec via Bluetooth Explorer -> Utilities -> Special Options
That did the trick for me.
The bluetooth explorer used to be available by pressing option then the bluetooth button, but now its bundled seperatly either with xcode or here :https://developer.apple.com/downloads/index.action?name=bluetooth%20explorer

Macbook Pro Retina GeForce 650M Cuda Crash (Important Information for Mac Users)

Similar Messages

Maybe you are looking for