Macbook Pro retina, Windows 8.1 dual screen, Dell E228WFP problem/blurry

Hello brainiacs,
I am running my Macbook Pro 2013+ edition with Retina display and an extrenal screen.
Problem: Fonts and windows on secondary screen (Dell E228WFP), in extended display mode, appears blurry and/or large (see screenshot)
I use a Mini Display Port to DVI for my Dell Screen, Apple original product.
I use Windows 8.1 with latest Boot Camp, version 5.1
My Macbook is latest Macbook Pro with retina 15'' 2560x1600 px.
Dell Screen has a resolution of 1680 x 1050 px.
When I view the display settings in Screen Resolution mode in Windows, I get the following warning: "Your resoltuion is lower than 2028x1440. Some items might not fit on your screen". I do not believe this warining is regarding blurryness, but rather moving windows from primary to secondary monitor.
Here's a screenshot:
Some of the texts look fairly sharp and crisp, for example the pop-up menu (except, this has huge fonts). Outlook is very blurry. Chrome is, - ok, but not perfect.
Best
/Lars

Hello brainiacs,
I am running my Macbook Pro 2013+ edition with Retina display and an extrenal screen.
Problem: Fonts and windows on secondary screen (Dell E228WFP), in extended display mode, appears blurry and/or large (see screenshot)
I use a Mini Display Port to DVI for my Dell Screen, Apple original product.
I use Windows 8.1 with latest Boot Camp, version 5.1
My Macbook is latest Macbook Pro with retina 15'' 2560x1600 px.
Dell Screen has a resolution of 1680 x 1050 px.
When I view the display settings in Screen Resolution mode in Windows, I get the following warning: "Your resoltuion is lower than 2028x1440. Some items might not fit on your screen". I do not believe this warining is regarding blurryness, but rather moving windows from primary to secondary monitor.
Here's a screenshot:
Some of the texts look fairly sharp and crisp, for example the pop-up menu (except, this has huge fonts). Outlook is very blurry. Chrome is, - ok, but not perfect.
Best
/Lars

Similar Messages

  • Can you run windows via bootcamp on the macbook pro retina display 2.5GHz dual-core Intel Core i5 512GB flash storage1

    Can you run windows via bootcamp on the macbook pro retina display 2.5GHz dual-core Intel Core i5 512GB flash storage1

    http://www.apple.com/support/bootcamp/

  • Bootcamp macbook pro retina windows 8 help

    I am having difficult installing windows 8 on my macbook pro retina. I watched countless youtube videos and read many how to's but I can't figure this out. I bought the USB superdrive, I have a copy of Windows 8 Pro I purchased. I have a 8gb flash as well. I have done so many steps, download Iso for windows 8 (which I am unsure what this is or if I need it) I downloaded drivers and put them on my usb as well. I clicked install the latest windows software from apple. I partitoned to give windows 8 50gb space. Than it restarts and black screen comes up. Sorry for such the long paragraph, but for days I have been stuck.
    Can someone please help me and please explain step by step as if you are explaining it to your grandmother. Lol. I erased my flash drive  and partitian back to only mac, so I will start fresh. Lol Thank you!

    I think I figured it out finally. It's installing windows now.Not sure how to delete my thread but assistance is no longer needed.

  • Macbook Pro Retina 15" strange stain on screen

    Hi guys. Today i noticed a strange stain on the bottom right corner of my Macbook Pro Retina 15 screen (plase see the photo provided). I thought that it's just dirty but it's impossible to clean it. Any thoughts?
    Thanks!

    Hi!, this is a message that I left in another post that is related to this case:
    Hi guys. I have the same problem and this clearly is a design problem.
    We all have had bad experiences in both official Apple stores and partners stores separately so I think is time to make Apple seriously aware of this issue and ask them to find us a free and permanent solution. We are all Apple loyal customers and this problem clearly is not our fault, it is not driven by bad use so we need to join forces and push the company to solve this.
    I have created an online database so the people that want can get it and share your problem details, pictures as well as your Macbook details and contact info. As soon as I have an important amount of people (let's say 50 - 100 people) I will start contacting Apple employees via social networks and provide them with details of the people in the list.
    https://macbookscreenproblem.wufoo.com/forms/zsnnv1p0gc67dc/
    Of course this DB is STRICTLY CONFIDENTIAL and will ONLY be used to contact Apple and show them that there is a significant amount of people with this problem and that we are demanding a solution to this.
    Let's join forces and fix this annoying problem.
    Thanks,
    Eduardo

  • Macbook Pro Retina 13" late 2013 My screen has developed vertical lines down the left hand side and they are multiplying

    Macbook Pro Retina 13"late 2013   2.4GHz Intel Core i5  8 GB 1600 MHz  DDR3  Intel Iris 1536MB  251 GB Flash.
    My screen has developed vertical lines down the left hand side yesterdays photo there is more today.

    You'd better make Genius Bar appointment to show them the problem.

  • Macbook Pro Retina + Windows 8 Questions

    First: I know that Bootcamp doesnt have any Windows 8 drivers yet. I know that Windows 7 drivers will do temporarily.
    In a month time, I will be getting a Macbook Pro retina. 13" base model. This would be my very first mac. I chose this mac because portability is a major factor for my everyday need. Im always on the move. I know the storage isn't enough but I will buy myself an external Hard drive. Depends on the budget. I will be using this laptop for not so heavy work. Mainly i will be studying Objective C and C++. Something for a free time self study developing. Reason why im putting windows in it, its because i need visual studio c++ for studying ( feel free to recommend any other application for c++ designed for mac). I chose windows 8 because the pro version is 60$ at my local retail.(I know how to do clean install without the requirements).
    My questions to those who successfully installed Win8:
    1. What are the issues you encountered and how did you solved it?
    2. How's the performance? Laggy?
    Thanks in advance.

    The update to boot camp is now available!
    Just installed Windows 8.1 Pro to my MacBook Pro, Retina, Mid 2012, OS X 10.8.5: Memory 16GB 1600MHz DDR3
    After going through the usual process from boot camp, then installed windows and the support drivers... the trackpad rt click did not work. I had to then go download the boot camp again from windows 8 using the url below and ran the set up.exe from the boot camp folder you can download from below. Run it within windows 8.
    http://support.apple.com/kb/dl1638
    Boot Camp Support Software 5.0.5033
    This solved the Trackpad Right Clicking issue (not working) as well as tapping.
    The wireless and network connectivity and keyboard brightness and speakers issues where resolved as well. The Boot camp support software enabled a boot camp control panel available in the windows 8 system tray and from there you can enable the track pad to tap and use the secondary click.

  • Macbook pro retina windows 7 iso problem

    Im on a macbook pro retina and have been trying to install windows 7 on it through bootcamp for the past 3 hours and no matter what image of Windows 7 I download from the internet it never fits bootcamp's requirements. I've gotten all the possible problems, from not being a 64 bits file to not even being windows 7 or later file. What on earth am I supposed to do?

    try one from here
    http://techverse.net/download-windows-7-iso-x86-x64-microsofts-official-servers/

  • Connecting HP 2311x display to new macbook pro Retina - no output on external screen

    I have a brand new MacBook Pro 15 in. with Retina display.  I also have a HP 2311x monitor.  When I plug in the HDMI cable, the external monitor says "check video cable" and the preferences "arrangement" thinks there is a display - even recognizes the type - but the external display just wont display anything but the "check video cable" box.  I spent 2 hours on with apple yesterday, they had me do all sorts of resets and stuff - but no luck.  The HDMi cable works when connecting a pc to the screen.  When connected to by macbook, the screen on the macbook likes to flash black and its annoying.  I have gotten really used to working with two screens....  and apple's suggestion was to buy a thunderbolt cable and try that.  As it is, with this new macbook I have to buy a bunch of cables, I really don't want to buy another one when I am not sure that will work.  Darn things are expensive when you are buying 4 connectors at once (ethernet connector since the speed via wireless is noticably slower; magsafe to magsafe2 converter; thunderbolt for my printer; and a connector for the monitor at home which doesn't have an hdmi port).
    Any other suggestions before adding another to that list? Since Apple seems to be out of ideas... any info would be appreciated.

    I have an HP 2311x as well. I'm using an HDMI cable and am not having any issues getting the screen to display. I know you said the cable works with a PC but have you tried a different HDMI cable just in case. It might be worth a try. Other than that, I'm not much help.
    The issue I had when plugging this monitor into my MBP retina was that the image was very blurry on the HP 2311x. I almost gave up on using it and was going to just buy a Thunderbolt display but after much research I found a custom firmware update that fixed the underscan/blurriness issue. So be prepared for that if you get the screen to display.
    If I can find that resource, I will post it here.
    Good luck!

  • Macbook pro retina, windows 7, how to install it without using optical drive?

    Hi,
    I am thinking of buying the new macbook pro with retina display.
    I do not intend to get and external optical drive.
    I want to split the hard disk and install a windows 7 ultimate, which I own and have as an CD image ( ISO file ).
    how can I install windows from my ISO without burning it into a CD or creating an external drive? is it possible?

    Put the iso on a USB thumb drive. Then use Boot Camp Assistant to make the thumb drive bootable. Then follow the instructions in the Boot Camp Installation Guide. http://www.apple.com/support/macbookpro/bootcamp/
    You should visit the Boot Camp Forum here https://discussions.apple.com/community/windows_software/boot_camp

  • Macbook Pro Retina Windows Graphic quality lost

    I've had windows in installed on my Macbook Retina ever since I first got it just for running games. I was getting decent fps in Just Cause 2, Battlefield 3 and Skyrim running on high settings at 1920 x 1800 resolutions (30-50 fps) just a few days ago, I logged onto Battlefield 3 to find that I was getting less than 10. This has happened to all of these windows games. I have tried updating and downgrading the graphics card driver, windows 7 32 bit, windows 7 64 bit and windows 8 64 bit. After reinstalling Windows and re downloading all of the games, it apears it must be some kind of hardware issue. For battlefield 3 to be playable I now have to use the 480 x 720 resolution and low settings which is kind of pathetic. I think that the mac os graphics performance hasn't changed. This is only playing Amnesia and tf2 though because the only other game that I own on mac osx (Portal 2) has some bug where it wont open. Is it possible that windows is only using the intel 400 series graphics chip for some reason? This is the only thing that I can think of even thouhg it seems highly unlickly as windows does not support mac's graphics switching and doesn't even have the driver installed. Does anyone have any idea what the problem might be?

    The problem is with the last EFI upgrade. There are numerous reports about this bug across the internet. Don't know whether apple knows about it though. Need to contact them.
    Reset your SMC, it restores FPS and overall performance, but problems returns after some time. I personally have done it already two times.

  • MacBook Pro Retina Windows Bootcamp Massively Overheating

    Hey all,
    After a struggle I finally got a Windows 7 64-bit installed into a partition and working. All well and good.
    However, during gaming (my only reason for a Windows partition, until the game manufacturers create a native OS X version) the MBP overheats. I have a feeling the demise of my last MBP was due to this problem.
    For reasons personal to my health, I game on the sofa with the laptop on ... my lap. So adding space underneath isn't really an option.
    I'm looking for some advice, because I want to make the use of the NVIDIA graphics drivers I have to enjoy the visuals of the game, but I need to preserve my hardware. Windows runs fine without heating and the machine is beautifully cold in OSX even when designing.
    Here's some Spec:
    OSX: 10.9.5
    Windows: 7
    Processor: 2.3Ghz Intel Core i7
    Memory: 16GB 1600 Mhz DDR3
    Graphics: Intel IRIS Pro 1536 MB
    MBP: Retina, 15 inch Late 2013
    Just looking for ideas to keep great graphics but not melt my mac

    I think I figured it out finally. It's installing windows now.Not sure how to delete my thread but assistance is no longer needed.

  • MacBook Pro Display (window) shifts off the screen when I move my mouse

    With a slight move with my magic mouse, my entire open window will shift completely off the screen with only a part of the window still visible. I have to click on the exposed edge of the window for it to shift back into place. It's only the window of the program that I have open that moves. The dock and the desktop image stays in place. I'm using an HP external monitor now but it was doing this before I hooked up the monitor. I've tried maximizing and minimizing my window but that does not seem to have an effect. Could it be the magic mouse? Thanks in advance for any help.

    Wow. The power of Google is truly amazing. Just a little while ago, my husband was going nuts with our computer. I googled the words 'when I move my mouse to the left, the screen moves to the right'. And, Eureka! What do you think was the first thing that popped up on Google?
    Well, the answer to my question, of course!:P Which led me right to here. It may not have been me that asked the question, but this did answer MY question!
    Apparently this applies to Leopard too. Thanks alot!
    Message was edited by: Linda Schodowsky

  • Macbook Pro Retina late 2013 Display Yellowish Screen

    I am Mac user for last 7 years. I have 3 other Mac at home. The latest one I bought is a Retina Display. First time I saw a Mac with a Yellow screen. I have tryied to calibrate, but not much success. Then I took it to an Apple service centre, they madeout the differece and replaced the screen after 7 days. But after replacing, the problem is still there. I just can not accept yellow screen as I am so used to with white screen on my other Macs.
    Now the question is how do I solve it?

    With the initial LG Retina display, folks were seeing image retention. Thereafter it seems that Apple was replacing the screen with Samsung screens, which exhibited a yellow-ish tint. There haven't been many complaints of image retention or tinting on the Late 2013 models even though the screens may be LG or Samsung. It looks as if Apple finally got it just right.
    However, as I understand it, Apple is still using the older screens for replacement parts. The only thing that I can advise is to keep having the screen replaced until you get one that you can live with. The tinting in your photo is obvious and I know of no way to 'calibrate' a warm screen to get an acceptable white point.
    Good luck,
    Clinton

  • Macbook Pro Retina - Windows 7 Tiny Text

    Is there a way to make the small text on windows 7 - Bootcamp larger so that its more legible?  I want to keep the same 2880x1800 resolution.

    You'll need to change your Windows DPI setting -- this is described in detail here:
    https://pattersonsupport.custhelp.com/app/answers/detail/a_id/13103/~/how-to-cha nge-dpi-settings-in-windows-7

  • 13" MacBook Pro - Retina, Late 2013 (A1502) Blank screen on startup, how do I fix?

    The model experienced a minor water spill via the rear vents (from left to right). After "drying" the model, the system turned on with the display, everything worked great for over 6 hours. After adjusting the display brightness up via the F2 key, the display went black shortly thereafter..
    Attempted all of the on/off tricks, including clearing the startup ram, so now it voices to hit the return key to run the setup in English (annoying).
    External Sony TV and Samsung LCD display were blank. The TV stated that no signal was detected.
    Plugged in iPhone 5S on both left and right USB ports, received buzz on startup for both, yet no charging indication.
    Please assist me in determining what I need to replace or be looking at. Thank you, I do appreciate your input and suggestions!

    Please make a Genius Appointment and take it in for service. They will make a diagnosis and let you know what the repair cost will be.

Maybe you are looking for

  • How to use standalone java client with an enterprise bean in J2EE 1.4

    Hi All, I am have deployed a stateless session bean in Sun's J2EE 1.4 Application Server. i am trying to call the bean using a standalone java client. but the client cannot access the bean. The error coming is: Jan 21, 2004 7:48:27 PM com.sun.corba.e

  • FI and controlling error while posting GL

    hi all, I did Fi configration by creating all by my own... but when i  was trying to post GL in fb50 itz thorows error of the following ......... Controlling area  does not exist Message no. KI101 Diagnosis Controlling area  does not exist. System Re

  • IPhone4 Upgrade to 4.1: No Longer Receive Calls At Home

    The wife and I both have the iphone4 and it had been working great until we updated to ios 4.1. Since then neither of us can receive calls or texts at home. We can make calls no problem and send texts as well but we are constantly missing calls, voic

  • Cards problem

    Hi, here is the problem I have n number of playing cards in a table (say 5). I want to find all the possible combinations and store then so that I can delete a particular card from the table. example. cards are 1, 2, 3, j, k combinations are are 1,2,

  • Best approach to pass string to table

    What is the best approach or way to pass a colon delimited string back to a table from a procedure? I know when using a multiselect item you can pass a string back and forth using HTMLDB_UTIL.STRING_TO_TABLE or HTMLDB_UTIL.TABLE_TO_STRING but I'm uns