Macbook Pro Retina wont connect to college wifi

I just recently purchased a new macbook pro retina and was really excited to use it at school and for classes.  Well at my school when you select the network, it will connec to it, and once it connects a popup window will come up in your browswer and you will type in a username and password.  once you do this you can use the internet.  Well i try to connect with my laptop and it wont bring up the popup window and will just show an ! over the wifi signal display.  When i open network preferences it says its connected, but i can access the internet.  the IT guy at my school tried for hours, and get get it (although he didnt know much about macs) and i cant seem to get it either.  Can anymore help me?

Something else to check ..
Open System Preferences > Network then select the Wi-Fi tab.
Drag the school wi fi network name to the top of the list.
You can open System Preferrences by clicking the System Preferences icon in your Dock
Or click System Preferences from your Apple menu icon top left in your screen.
Or, from your Applications folder.
message edited by;  cs

Similar Messages

  • MacBook Pro Retina stopped connecting to my wifi. But all other devices still work on it.

    My MacBook Pro Retina stopped connecting to my wifi. But all my other devices still work on the wifi. I can connect to wifi on the MacBook through my personal hotspot on my iPhone 4S. I have not changed any settings on my wifi network, and I have not changed any wifi settings on my MacBook.  Please help!

    Care to share which OS you are using?
    Have you read for possible solutions over in the "More Like This" thread over here?-----------------------> 
    Change your router channel number.  Most times this works & is all you have to do. 
    System Preferences>Network
    Click the Assist Me button.
    In the next window that pops up, click the Diagnostic button & do the necessary.
    Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer.   See these basic networking KB Articles:  http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
    http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
    Manually provided DNS server addresses are higher priority than DHCP's
    http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
    ============================
    What to do when you can't connect to the Internet
    Also, run the Airport Utility app which is located inside the Utilities folder.
    =====================
    If using a  Linksys router, contact LinkSys Customer Support and/or post in their forums.
    If using Apple's Airport, please re-post over in one of the AirPort Forums.

  • MacBook Pro Retina Wont Connect back to Monitor

    Hey Everyone,
    I have a MacBook Pro Retina Early 2013 15in that is running OS X Yosemite - 10.10.2 - Graphics Card: NVIDIA GeForce GT 650M 1024 MB
    At Work for the past 1.5 years i have been connecting to a Dell Monitor via a DVI to HDMI Cable to use as my primary screen and have never had any issues. During the day I often present on the projector in the BoardRoom a Dell 4610X using a direct HDMI cable.
    The issue: Ever since I have updated my laptop to Yosemite, every time i connect my macbook to my monitor after its been connected to the projector it will no longer connect. The monitor will recognize that there is something connected but it wont show anything. Even if i try another display in the office the same thing happens. The issue will always resolve if i restart the computer.
    Recently I had an issue with the Logic Board and it was replaced by an Apple Certified repair shop. This issue was happening even before the logic board was replaced and it is still having the same issues now, so I don't believe its an hardware issue.
    Although this issue is not critical, its a nuisance to re-start my laptop each time i get back to my desk after a meeting in the boardroom...
    I would high appreciate some help on this!!
    Thanks in Advance

    Something else to check ..
    Open System Preferences > Network then select the Wi-Fi tab.
    Drag the school wi fi network name to the top of the list.
    You can open System Preferrences by clicking the System Preferences icon in your Dock
    Or click System Preferences from your Apple menu icon top left in your screen.
    Or, from your Applications folder.
    message edited by;  cs

  • I cannot get my Macbook Pro retina to connect to my BT Home hub.

    Hi,
    I cannot get my Macbook Pro Retina to connect to my BT homehub either wirelessly or through ethernet using the thunderbolt adaptor.  I know that this is a problem with my IP address as in Network Settings it tells me that
    'Thunderbolt Ethernet has a self-assigned IP address and will not be able to connect to the Internet.'
    I know that my internet connection is fine as I can plug the ethernet cable back into my PC and it works fine.  Also, my phone and ipad connect wirelessly just fine.
    Bt have told me to contact Apple, but I can't get hold of Apple till tomorrow.
    Amyone know how to overcome this?
    I did also find my IP address and enter it manually, at which point netwrok settings showed my ethernet connection as green and connected, but it still wasn't working.
    Thanks

    Same for wifi.  I have put in my IP address manually for the wifi network and it has gone green and connects to the hub, but gives me an exclamation mark on the wifi bar and still doesnt connect to the internet.
    I am writing this whilst connected to the internet on the same laptop but connected to BTFON which is a really slow public network I have access to as a BT customer.

  • My macbook pro retina wont recognize my external hard drive

    my macbook pro retina wont recognize my external hard drive.
    i opned the hard drive in the past on my computer and used it alot.
    one time when i took it out i forgot to eject it, and since then when ever i conect it it would never show up on my computer or ever recognize the device.
    please help me!

    For starters try a PRAM reset.
    DALE

  • Setting up new ipad 2. Won't accept my PW for my Airport Extreme (Wi Fi network?)  Where is the PW for my WiFi? I am stymied. Can I set up through My MacBook Pro, which IS connected to my WiFi network?

    Setting up new ipad 2. Won't accept my PW for my Airport Extreme (Wi Fi network?)  Where is the PW for my Wi Fi? I am stymied. Can I set up through my MacBook Pro, which IS connected to my WiFi network?

    If you could provide the make and model number of the modem that the AirPort Extreme will be connecting to, we can likely tell you a bit more about what to expect in the way of getting the AirPort set up and working.
    Unfortunately, "plug and play" does not apply here. You will need to set up and configure the AirPort Extreme using your iPad or iMac to name the AirPort as a device, assign a device password, name the wireless network, assign a device password and a few other things.
    Once the AirPort Extreme is set up, you can connect the PC to one of the LAN <--> ports on the AirPort Extreme using an Etherent cable.
    The iPad and iMac will connect to the wireless network that the AirPort Extreme provides.

  • MacBook Pro won't connect to home wifi, but will connect to other networks

    Help! MacBook Pro won't connect to home wifi but will connect to other networks. Others can connect to my home network. I've tried diagnostics, resetting the router, restarting my computer, and forgetting the network and then trying to access it. Nothing works.

    Hey Brittany, 
    Welcome to Apple Support Communities.
    It sounds like you’ve done quite a bit of troubleshooting to try and resolve the issue with your MacBook Pro not connecting to your Wi-Fi network. If you haven’t already, take a look at the article linked below which provides some additional troubleshooting suggestions that may help you resolve the issue.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity - Apple Support
    So long,
    -Jason

  • Macbook pro (retina) wont boot - can't get to recovery

    I'm having a bizarre problem with my Macbook pro retina 15".
    I was using bootcamp/booted into windows and playing Star wars the old republic when the machine suddenly froze, then the display started going into lots of squares of multiple colours.
    When I try to boot in to OSX it freezes after the apple logo and the small cirle stops. If I try get to the recovery by pressing cmd + r the same thing happens. I've also tried using the internet recovery option, the same thing happens after it connects to my wifi etc.
    If I press alt during bootup to get to the different drives to boot from, the icons (i.e. OSX or bootcamp) are displayed but are slightly brown and look a bit distorted. If I select bootcamp and try to boot into windows the squares/distorted screen issue starts again.
    I have also tried booting from a mountain lion install usb i made - same probelm as above: freezes after apple logo.
    I've also tried resetting the PRAM/NVRAM or whatever its called.
    Does anyone have any ideas I can try as I can't call Apple care til Monday now?
    Thanks

    Nope. Your only option is to take it to an Apple Genius Bar as your system is FUBAR. More then likely a hardware problem from over heating.

  • Super SLOOOOW file transfer from MacBook Pro Retina to Time Capsule over WiFi - why?

    So I have been having a search around and it seems like the advice for folks complaining about ludicrously slow wifi transfers from their Mac to their Time Capsule is... to do it wired.
    As you may know, the MacBook Pro Retina does not have a cable Ethernet port. So I have to buy a Thunderbolt-to-Ethernet adaptor (and a cable if I don't already have one) just to perform this basic task? Seems hard to believe.
    MacBook wifi is showing as connected via 802.11n to the Time Capsule and the link speed is showing 217 Mbps in Network Utility.
    So why is it so slow?

    Thank you, LaPastenague - very complete answer!
    How is the old NAS connected to the TC?
    What actual speed are you getting?
    It is important that when you select an option you stop other options from interferring.. ie.. turn off wireless when you do ethernet.
    First, I had the NAS connected to the laptop (Dell XPS M1710, Win7 - (yeah, I know, but it does the job, still)) via USB, which generated about 900KB/S r/w speed,
    then I tried connecting it via LAN to TC, but didn't succeed in getting TC recognize the drive,
    lastly, I connected it via the USB port directly to the TC, and got ~900KB/S r/w speeds again.
    In all scenarios, the laptop was connected via LAN as well (TC's WiFi was not disabled, though).
    Then I read the above thread and tried finding DHCP settings. Found them in the "internet settings" in the airport utility, but not in the "dive settings", so I didn't know what to change there.
    Strangely, the only thing that I changed was the TC-name, taking away a hyphen and a space (from "myname's TC" to "mynamesTC"), which resulted in faster r/w speeds, going from the 900KB/S to 1.5MB/S (still not what I expected).
    Also that any copying of files will be a loop, old NAS--Computer.. Computer--TC
    Got it. Tried to provide a faster connection by directly connecting old NAS to TC via USB, but makes sense.
    Each connection is just as impportant as the other. Plus you can see the computer must handle every packet in a double hop tx, rx tx rx for each one. So using gigabit all the way is vital.
    Will try again connecting old NAS to TC via GB-LAN, and have it recognize it, and provide and update here. 
    This is best done in full isolation from internet.. just setup so you can do the copy overnight.
    I was planning on doing several actions of moving files in a session of re-organizing, and am not really keen on waiting 4-6hrs between each step. The old NAS shall host all videos later, as it is recognized by the PS3 when connected via USB, while the TC shall host all photos and music, which I am rather accessing from the laptop's itunes.
    And also to realise lots of very small files can copy extremely slowly.. no matter how fast the connections are.. it is heaps of small files that cause copying to take forever because files are written to the disk and then file allocation tables are filled in for every one. It is why a backup is much faster as files are compressed into single large file. Or like TM using 8KB bands where the file ends are handled differently to normal disk.
    That will have added to the slow-ness of the session last night, as I was copying 25GB of photos which took 6hrs (***). So that would have been faster if I compressed them to .zip before moving? (not because it reduces size, as it barely does, but becuase it puts many small files into one big one?)
    Just moved a 164MB vid from laptop to old NAS (which is still connected to TCs USB port, while laptop to TC via WiFi): result: 1minute40secs @ 1.70MB/S.
    Then moved same vis from laptop to TC: 1minute55secs @ 1.80MB/S (gaining write speed slower that old NAS, therefore taking longer despite higher final speed).
    So, is there any further improvement / setting that I could change (DHCP / NAT) to get to higher r/w speeds, like the 6.75MB/S quoted above?
    Thank you again! MFP

  • Jaybird headphones and Macbook Pro Retina bluetooth connectivity issues

    I recently purchased the Jaybird Bluebuds X Premium headphones and for awhile it would connect to my new Macbook Pro Retina 15'' via bluetooth, but now it doesn't anymore. The headphones connect just fine to my phone (iPhone 4S), and other Macbook Pros (not retina), but they do not connect to other Macbook Pro Retinas. I was wondering if this was a connectivity issue with Macbook Pro Retinas and if so how can I get around it to connect the headphones again?
    Thanks

    Hey there LongHorn16,
    It sounds like your Bluetooth headphones aren't working with this one computer, but there is no issue with other devices that you have. I would start with these 2 steps from the following article:
    Restart your computer
    Sometimes a simple restart of your Mac is all it takes to get things running smoothly again. You may also want to try resetting your computer's PRAM and NVRAM.
    Reset your Bluetooth device
    Try turning your device off and then on again. If that doesn't resolve the issue, see if you can reset your device—refer to the documentation that came with your device for instructions.
    Bluetooth Quick Assist
    http://support.apple.com/kb/HT1153
    If it still doesn't work, then I would next use this article to remove the device:
    Bluetooth: How to Delete a Paired Device
    http://support.apple.com/kb/TA27116
    Then restart your computer and pair it again:
    OS X Lion: Set up a Bluetooth device
    http://support.apple.com/kb/PH3647
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Macbook Pro Retina problem connecting to external monitor

    Hello Community,
    I've been experiencing a problem, I bought a 13' Macbook Pro Retina. Not quite a cheap machine.
    But when I connect through HDMI to my HP 23xi , the screen gets blurry and cut. I tried messing with the configurations, but it simply won't get better.
    I presume it's because it is retina, of course. But I bought this monitor, a quite nice monitor a month ago, and I do not want to sell it nor throw it away.
    What should I do?
    My Kindest Regards,
    Luisvf7

    Hi luisvf7,
    So it seems you are having issues with your MacBook Pro not displaying properly on your external display. It does sound like a frustrating situation. Let’s see if we can get you up and running.
    I would suggest that you use the steps in this article to troubleshoot the problem -
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Specifically the section - No video or no signal, image distortion, "snow," or flickering
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Macbook Pro Retina problem connecting to HP 23xi

    Hello Community,
    I've been experiencing a problem, I bought a 13' Macbook Pro Retina. Not quite a cheap machine.
    But when I connect through HDMI to my HP 23xi , the screen gets blurry and cut (which I was able to fix in the setting). I tried messing with the configurations, but it simply won't get better.
    I presume it's because it is retina, of course. But I bought this monitor, a quite nice monitor a month ago, and I do not want to sell it nor throw it away.
    I bought this Mac to do web design , but this is not the outcome I was expecting at all.
    I've seen the other post about the RGB fix, altough I haven't tried it because it isn't very pratical, my problem is not the color, but rather the pixelated resolution that appears on the display.
    What should I do?
    My Kindest Regards,
    Luisvf7
    This question was solved.
    View Solution.

    Looking at the specs for the MacBook,
    Thunderbolt digital video output
    Native Mini DisplayPort output
    DVI output using Mini DisplayPort to DVI Adapter (sold separately)
    VGA output using Mini DisplayPort to VGA Adapter (sold separately)
    Dual-link DVI output using Mini DisplayPort to Dual-Link DVI Adapter (sold separately)
    HDMI video output
    Support for 1080p resolution at up to 60Hz
    Support for 3840-by-2160 resolution at 30Hz
    Support for 4096-by-2160 resolution at 24Hz
     I would consider using a Mini DisplayPort to Dual-Link DVI adapter for Thunderbolt digital video. 
    You will not achieve the 2560 x 1600 display resolution that your MacBook Pro is capable of on your HP display as the display is not capable of that. Specs for the display
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • MacBook Pro Retina Wireless Connection problem

    I recently purchased a MacBook Pro Retina (late 2013) w AC wireless capability, and I have not been able to connect to my wireless network at work. Other computers, including my previous MacBook Pro (mid 2008) and my iPad 3 are able to connect to the work network without problems and I have no problems connecting my new MBP to my home or other networks. I have Windows 8 on a Boot Camp partition, and when my MBP is booted under windows, it still does not connect. My MBP is running OS X 10.9.4. My work wireless network uses a Linksys Wireless G Access Point model WAP54G v.2. Rebooting the router does not help. When my MBP tries to connect to the work wireless network, the status in Network Preferences says "Wi-Fi has the self-assigned IP address 169.254.216.147 and will not be able to connect to the Internet."  Any help or suggestions would be greatly appreciated.

    Hi Jackso,
    Welcome to the Apple Support Communities!
    For troubleshooting a self-assigned IP address, I would suggest reading over and using the following article as a reference and resource.
    Internet connection does not work with an IP address space of 169.254.xxx.xxx from ISP, router, or manual configuration
    http://support.apple.com/kb/TS3798
    Have a great day,
    Joe

  • MACBOOK PRO RETINA WONT TURN ON!!!!!!

    I cant turn on my macbook pro retina its just stuck with the white display and the apple logo... PLEASE HELP ITS VERY IMPORTANT IM WRITING A TERM PAPER DUE TOMORROW

    Try a SMC reset:
    http://support.apple.com/kb/HT3964
    Ciao.

  • MacBook Pro Retina says connected to ethernet, but will not connect

    I have a MacBook Pro 13" Retina. It will not connect to my office's network no matter what I do. I've tried different cables, different ports, toggling wifi on and off, inspecting the ports to see if they will recognize other thunderbolt connections and they will. I was able to connect to a Thunderbolt monitor without any issues. It may be the adapter, but there are all kinds of funky-ness going on when I try to assess the network. The thunderbolt heading under System Information claims nothing is connected - even when communicating with the Thunderbolt display. The ethernet connection claims to be working, but will not connect to the internet. It also can't seem to find our router. I've tried to manually enter all the information in using the assistant, but it still can't find it. This is especially frustrating since this computer is under a year old. I can't take it to the Genius Bar because it is owned by my company and contains proprietary info. Any help would be greatly appreciated.

    Hello NotAppleSavy,
    Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

Maybe you are looking for

  • Unable to change make a down payment using Purchase order

    Hello Experts, I created a purchase order and used that purchase order in f-47 and f-48 (created down payment for the P.O). When i tried to execute the good receipt i encountered an error that said profit center not mentioned in line item 001. I unde

  • Burn a movie

    Can I burn a Quick Time movie to a DVD on my iMac? If so, how do I do it?

  • Advanced Replication using Oracle 8i and Linux

    Hi, My name is Sadhana. I am a software engineer. I have a doubt regarding Oracle and Linux. Well, I am involved in developing a customer care and billing solution with back end as Oracle8i (8.1.5)on Linux RH 6.1. I need your guidance is regarding th

  • MaxL Session Expired

    Hi, I'm executing the MaxL to data load and I'm getting the below error. ERROR - 1051021 - You have been logged out due to inactivity or explicitly by the administrator.. I confirmed with my Admin and got to know that my session wasn't killed by admi

  • Oracle Processes parameter

    Hi, What does "Processes" parameter mean in Oracle 10g R2. By what I understand I understood that it is the maximum number of OS processes that can be connected to Oracle. Please correct me if I am wrong. How do we determine the number of processes t