MacBook Pro running 10.4.9

After a year of no problems on new MacBook Pro, Palm Tungsten E goes through entire synch, then crashes with following message:
Command: Conduit Manager
Path: /Applications/Palm/Conduit Manager/Contents/MacOSClassic/Conduit Manager
Parent: WindowServer 89
Rosetta: Yes
Verson 3.2 (3.2)
PID: 495
Thread: Unknown
Exception: EXCBADACCESS (0x0001)
Codes: KERNINVALIDADDRESS (0.001) AT 0X0C5CB080
I've spent hours on Palm websites, uninstalled and reinstalled Tungsten E software, reinstalled fixit for conflicts, and still no go. It seems, from what I've read, that this may be something that happens with older Palm devices, that something suddenly (and forever after) prevents the USB from reading.
I thought about trying to active iSynch, but in order for iSynch to recognize my Palm device, I have to deactive the current Palm connections.
I am sitting here thinking about possible loss of years of Palm data, wondering what kind of deep doo doo I could get into by doing this. I'm also thinking that activating iSynch will enable me not to synch my Palm files, but iCal and Address Book, which I don't use.
I've had problems regularly over the years with Palm, and am so disgusted at the moment that I'm thinking about switching over and using iCal and Address Book on my iPod. However, I REALLY like the Palm program and am used to it.
Another possible solution would be to bite the bullet and spend $200 on a new device that synchs via Bluetooth, but I'd like to be sure first that the problem is in the device and not the OS. I did run a hardwear check that came out no problems.
Anyone have any experience with any of this? (help, help)
MacBook Pro Mac OS X (10.4.9) Palm synch problem

You might obtain some relief by installing a 4 GB RAM module in place of one of the two 2 GB modules. That would then allow for the MBP to operate with the maximum of 6 GB RAM that an early 15" 2008 MBP supports.
The best sources for Mac compatible RAM are OWC and Crucial.
Ciao.

Similar Messages

I have an Epson printer on a Wifi network. Windows 7 desktop and and HP Win 7 laptop (my wifes) print to it just fine. My MacBook Pro running Yosemite won't detect it, and I have the latest driver installed. No problem when I had a Canon...

I have an Epson printer on a Wifi network. Windows 7 desktop is running the network, and my wife's HP Win 7 laptop prints to it just fine. My MacBook Pro running Yosemite won't detect it, and I do have the latest driver installed. I didn't have a problem when I had a Canon Pixma on the network, but when I replaced it with the Epson nothing seems to work. I go to add a printer to the queue and only the FAX function of the printer shows up - not the WS-4530 print function. Does anyone out there have any suggestions? Please??? :-)

Hi Kelly,
As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
OS X Yosemite: Printing troubleshooting
Start with the section titled Check the network.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

How do I use my Time Capsule to back up my wife's MacBook Pro running 10.4.

I just installed a Time Capsule. I've extended the range with two Airport Expresses. I've connected my MacBook running 10.6.3 to the wireless network. I've connected my wife's MacBook Pro running 10.4.11 to it. I've connected my wife's 3G iPhone to it and my first gen iPhone to it and our Apple TV to it. All devices can connect to the internet. I've connected the Time Capsule to the printer and printed wirelessly from both computers.
I've backed up my MacBook and seen that the Time Machine is backing up my MacBook as it should.
How do use the Time Capsule to back up my wife's MacBook Pro running 10.4.11? I've tried connecting them via ethernet cable and via USB cable. In both cases the Time Capsule failed to show up as an external drive and wasn't seen by the 10.4.11 back up utility.
How do people do this? (Other than convincing their wives to let them upgrade their MacBook Pro to 10.6.3?)

James Elliott1 wrote:
How do people do this? (Other than convincing their wives to let them upgrade their MacBook Pro to 10.6.3?)
That really is your best option. Sooner or later, you're going to have a problem with the "other" data on your Time Capsule, since the backups of your Mac will, eventually, fill up all the available empty space. That will, of course, limit the space available for the other backups.
There's a very cumbersome workaround in the blue box of #Q3 of the Using TIME MACHINE with a TIME CAPSULE *User Tip,* also at the top of this forum.
Another is to connect a USB drive to the Time Capsule, partition it if desired, and back up one Mac to it and the other to the TC's internal drive.

HT3986 How do I run an external monitor on a macbook pro running windows 7

How do I run an external monitor on a Macbook Pro running Windows 7

on my imac connecting a TB to dvi converter to my imac and to my 24" dell monitor was all it took
windows like osx saw the external monitor and let me clone to it or extend my desktop to it

How do I install Xcode on a MacBook Pro running 10.7.9 (Lion?)

I am a retired chap trying to help my grandson get into robotics. He wants to be able to write code to control an Arduino which in turn will control a number of solenoids. I used to design and build hardware and write control software (using Delphi O.O.) for space research equipment. I have MacBook Pro running OS X 10.7.9 and have access to an iMAC running OS X 10.6.8
We want to use C++ (unless anyone can tell us why this might be a bad move) and I have been told I need to install XCode. I looked into it and as far as I can glean, I have to install XCode 4 to be compatible with my MacBook. I downloaded XCode 4.6.2 and ended up with two files, namely :
xcode4620419895a.dmg
xcode4620419895a.dmg.part
and now I am stuck. Firstly, was that the correct version to download? If it is, how do I actually install the development environment from those two files? If I try to execute the disk image it tells me it is unrecognisable. If I try to execute the *.part document it asks me what application I should open it with. Any help/advice will be much appreciated

Sorry it took me a while to come back. Anyway, I cleared out the old Xcode files and went into the Developers Download area and selected to download 4.6.3 and was presented with this window
I clicked on Savefile and it downloaded. I was intrigued as to why this would work as it was exactly what I had done before. Out of interest I decided to issue the download again and this time it created a zero byte disk image and a "part" file of 1.6mB. I shall just have to put that behind me (accepting that I don't understand why one download should work and all the precious attempts should fail) and move on.
Thank you for your help (it was my eyesight that caused me to think my OS version was 10.7.9 - it is indeed 10.7.5)

This Question is at least 2.5 years old. But still an issue. I have an early 2008 and mid 2010 13 inch macbook pro running iTunes 10.7. Itunes on both machines doesn't recognize blank cds or allow me to import from a music cd when I insert it.

I have an early 2008 and mid 2010 13 inch macbook pro running iTunes 10.7. Itunes on both machines doesn't recognize blank cds or allow me to import from a music cd when I insert it.

iTunes does not use the .xml it uses the .itl
If you are sure your old library file migrated across (does the file size and modification dates suggest it has?) start iTunes while holding down the option/alt key and guide it to the .itl file to get it to use that one.

Mid-2010 Macbook Pro running very hot

Hi all,
My mid-2010 Macbook pro is running very hot. On average CPU is 61-70 degrees Celsius, sometimes even more. I'm pretty bad at having lots of chrome tabs open and heavy multitasking, but even when I'm not temperature still ends up very high and fan rpm can get to over 6000. Heat seems to be concentrated to the lefthand side of the touchpad (battery area?). I'm running 10.9.3.
Current stats below from iStat pro widget (smcFanControl concurs with these temps), with only the following pic's activity running. Laptop currently balanced on two books (so airflow around the sides) which are in turn on my lap.
I have tried reseting the SMC with the shift-control-option-power method but it doesn't seem to have worked - instructions said to press and hold this, then release, then press power again to boot, but laptop boots up from this combination anyway.
Am I just doing something wrong or will this be an expensive trip to the apple store to fix?

Hey happyhaskins,
If you are having an issue with your MacBook Pro running excessively hot, I would suggest that you troubleshoot using the steps in this article -
Mac notebooks: Operating temperature - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

I have a late 2011 model MacBook Pro running Mountain Lion. I love the AirPlay mirroring feature with Apple TV...BUT, how do I mirror with TVs that don't have Apple TV? I used to run a cable from my mini display port to the HDMI input of a TV.

I have a late 2011 model MacBook Pro running Mountain Lion. I love the AirPlay mirroring feature with Apple TV...BUT, how do I mirror with TVs that don't have Apple TV? I used to run a cable from my mini display port to the HDMI input of a TV. This feature seems to be lost in the Mountain Lion upgrade. Did Apple feel that once Mountain Lion came out that EVERYONE would have Apple TV? There are no settings in System Preferences/Display like there used to be...only for AirPlay Mirroring.

Running a cable to the HDMI port is still supported. (and still works on mine).
If the Arrangement tab in System Preferences > Displays isn't present then it doesn't recognize the physical connection. Double check all cables. If that doesn't work try a PRAM reset:
http://support.apple.com/kb/ht1379

Have a macbook pro running osx lion, connected a kindle fire using micro usb to transfer pictures and the disk icon won't show up on the desktop. When I ran disk utilities the kindle does show up there. Any thoughts as to why it's not recognizing?

Have a macbook pro running osx lion. Connected a Kindle Fire using micro usb and the disk icon doesn't show up on the desktop. Also sometimes get a message sayiing computer doesn't recognize device. When I opened disk utilities the Kindle disk does show up there. What am I missing?

cashworth wrote:
Kindle is connected directly, not thru a hub. Also called Amazon Kindle support, tech was baffled when I told her I was using a Mac. She said, "I'm not really familiar with apple products."
Precisely why it's not an iPad, and why it doesn't cost very much. An Apple rep would tell you how to connect an iPad to every computer.
Go here: http://www.amazon.com/gp/help/customer/display.html/ref=sv_kinh_9?ie=UTF8&nodeId =200127470

I'm trying to connect my MacBook Pro running on OS 10.8.2 to a Linksys EA3500 router and when I go to click on the set up icon I get an "unsupported operating system". Any suggestions on what to do? The Linksys site is useless.

I'm trying to connect my MacBook Pro running on OS 10.8.2 to a Linksys EA3500 router and when I go to click on the set up icon I get an "unsupported operating system". Any suggestions on what to do? The Linksys site is useless. Do I need some kind of upgrade?

Don't use the CD software its not necessary.
Infact put it in the trash.
Your router will have an IP address in the range 192.168.1.1
Connect your router to your Mac via Ethernet cable (They usually supply one with the router and don't worry which end goes where the Mac LAN socket is bi-directional)
Also connect your router to your telephone line.
Now open your Web browser Safari . Type in the IP address above and a Javascript control panel will launch
Enter the default password and username (They are on a label on the router )
Your now have the ability to set up your router.
Your will need the password and user name supplied to you by your ISP at a minimum.
Enter these and most modern routers automatically configure the basic networking setting.
You now need to go to the security setting and set this as WPA2 Personal (NOT Enterprise) or WPA2 with AES and TKIP which ever it refers to and create a pass-phase. WRITE it down
You should be online.
Now remove the cable and connect to the Wifi and enter that passphase.

Have a macbook pro running 10.8.5. Safari updated a day ago and now it is corrupt and will not open

I have a macbook pro running 10.8.5. Safari updated a day ago and now it is corrupt and will not open. It upgraded to 6.1. What is the best proceedure to get Safari working again?
Thanks

This is the most common problem :
How do I uninstall Glims?
If not that, please include a crash report & test in a new or Guest user account.

Can't access the "Apple" icon in upper main menu to shutdown my MacBook Pro running 10.6.8! Also can't open a new finder window and main menus such as File and Edit are sluggish to open or don't open at all. Doesn't happen each time I attempt to shutdow

Can't access the "Apple" icon in upper main menu to shutdown my MacBook Pro running 10.6.8! Also can't open a new finder window and main menus such as File and Edit are sluggish to open or don't open at all. Doesn't happen each time I attempt to shutdowCan't

There are some keyboard commands (shortcuts) you can use instead of having to go to the Apple menu -
Control-Eject          This brings up the Restart-Sleep-Cancel-Shutdown window.
Command-Option-Eject          This puts the machine to sleep.
Command-Control-Eject          This closes all apps and restarts the machine.
Command-Option-Control-Eject          This closes all apps and shuts the machine down.

Unable to bind MacBook Pro (running 10.6 - Snow Leopard ) to Windows Server 2003 domain

Hi there, I've been working on this problem for a few hours now (and a few hours last Thursday) and don't feel I'm getting anywhere, so I'm reaching out for help....
My organisation has just purchased a new MacBook Pro, running Snow Leopard (OSX 10.6) and as a Technical Support Engineer I have been asked to configure it for an end user.
I am currently trying to join it to our corporate domain, which is a Windows Server 2003 domain operating at the Windows Server 2003 Native domain functional level.
The MacBook is configured to use DHCP, and has been assigned valid IP address, DNS servers etc by the DHCP server. It can resolve all names on our network, including the names of our domain controllers. When I use nslookup to resolve the name of the domain "my_domain.local" it returns a list of DC's on the domain, which would indicate to me that name resolution is working perfectly. It is using our primary DNS server, 'Ponus' to resolve these names - Ponus is also the Domain Controller in this site.
To attempt to join the MacBook to the domain I have created a computer account for it on the domain, in the Computers container. I have gone into System/Library/Core Services and run the Directory Utility.
In the directory Utility I have ticked Active Directory and clicked on it to edit. The 'Forest' field is greyed out and set to 'Automatic', in the 'Domain' field I have entered my_domain.local, which is the FQDN of my domain. I click Bind and when prompted enter my Domain Admin username and password (in the 'Create Computer Account in:' field it displays correctly as CN=Computers,DC=my_domain,DC=local.)
When I click OK I get the message: Invalid domain. An invalid Domain and Forest combination was specified. You should enter a fully qualified DNS name for the domain and forest (e.g., ads.company.com).
I have attempted writing the domain as my_domain.local, my_domain.local., MY_DOMAIN.LOCAL and MY_DOMAIN.LOCAL. but I get the same error each time. I have checked and rechecked DNS is resolving OK, and cannot see why it cannot find the Domain and Forest from the FQDN that I am entering. Even so I tried creating records in the hosts file on the MacBook to point to the main Domain Controller at this site (Ponus) but this didn't change anything.
I have seen a few people report the same issue online but the responses tend to fizzle out before anyone gets to the bottom of it. I have seen some indication that people with an understore (_) in their domain name, or with a .local domain name may experience issues with joining Mac hosts, however these details are very vague and if true there must be a workaround.
If anyone could help me with this I would greatly appreciate it, I'm running out of time to complete this work and have run out of things to try.
I have an inkling that this is due to the Mac for some reason not reading the SRV records for the DCs and LDAP in DNS, or to do with the Mac looking only at one SRV record (ie. there is one for a new DC that we haven't deployed yet), not being able to reach this and giving up, but I'm clutching at straws really with my limited knowledge of the Macs process for joining the domain.
Many many thanks,

Hi there,
A simple suggestion , please make sure both MacBook Pro clock and the server clock are the same meaning the hour/Min/ sec both should match. A least difference of 3 seconds is fine.
I had faced this problem in many place and only solution was to match the time and it will bind immediatly.

My Aperture 2.1 has gone into a continual thumbnail mode. I left the computer, a MacBook Pro, run all night, about 12 hours and it is still making thumbnails. I tried reloading Aperture 2.1, but that did not change anything. I have also turned the syst

My Aperture 2.1 has gone into a continual thumbnail mode. I left the computer, a MacBook Pro, run all night, about 12 hours and it is still making thumbnails. I tried reloading Aperture 2.1, but that did not change anything. I have also turned the system off, for a period of time, and then turning it back on, when I click on Aperture, it comes up and locks in the thumbnail mode. I can view my stored pictures, even modify them, but it still says thumbnails.
I got in this mode by trying to import "one jpeg photo", from a scanned slide using a Nikon Scan4 IS5000ED scanner. I had saved the scan to my desktop before I tried to import it.
Please Help, Maurice A Bird at [email protected]
Thanks

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error.

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error. "Failed to Continue Activity" Cocoa Error 4609. Handoff is working for phone calls and text messages. By email just crashes each time. It was also doing it under 8.0.2. My iPhone and iPad handle this fine. It's only the MacBook to the iPhone that fails, and only on email.

Handoff Continuity Troubleshooting

I'm using a macbook pro, running snow leopard. Yesterday I got around to emptying my trash for the first time in quite awhile and was surprised by how much there seemed to be in there. Immediately after a question mark symbols appeared on all my hard disk

I'm using a macbook pro, running snow leopard. Yesterday I got around to emptying my trash for the first time in quite awhile and was surprised by how much there seemed to be in there. Immediately after a question mark symbol appeared on all my hard disk folders. If I click on these question marks I get a message saying ' the item can't be found'.

mpagan47 wrote: a question mark symbol appeared on all my hard disk folders.
Not sure where these hard disk folders are located that you are referring to? Finder, Finder tool bar, Finder side bar, Desktop, Dock?
More then likely they are an alias that not longer point to the orginals, thus the question mark.
I would reboot. Delete icons if an alias and just recreate by dragging from the source. Try right click (control) click to remove.

MacBook Pro running 10.4.9

Similar Messages

Maybe you are looking for