MacBook Pro screen extremely pixelated on start up

I've had my mac for under two years with no problems what so ever. Recently the screen seemed to cut in half and freeze, becoming pixelated once or twice. After rebooting the mac a couple of times it has started to boot up extremely pixelated so badly that nothing on the screen is at all visible. It then around 5 minutes later reverts to a blank white screen. I will attach some pictures to show the extent of the screen.
https://pbs.twimg.com/media/BVkNMj3IcAAqMCx.jpg:large
https://pbs.twimg.com/media/BVkOPnwIUAAg_XV.jpg:large
Any advice would be really appriciated,
Thanks, Sam.

Hi I am experiencing the same problem with my macbook pro. I purchased it about the same time too.
Thanks for this post.
It seems for the link below that we are not the only ones experiencing this problem.
http://appleinsider.com/articles/13/10/14/apples-2011-macbook-pro-lineup-sufferi ng-from-sporadic-gpu-failures

Similar Messages

  • MacBook Pro screen gets pixelated (see screenshot)

    When swiching among applications my screen gets pixelated,
    this issue has been happening after installed Yosemite 3 weeks ago.
    I also had other issues which took my Macbook Pro to the Apple care support and got the motherboard and graphics card replaced
    (it was still covered by my Apple Care Protection Plan).
    Nonetheless this problem persists.... and the warranty expired meanwhile....
    I am starting to panic because this was supposed to have been fixed by the Apple support last intervention (which took me there twice)....
    What should I do?
    Thanks for your advice,
    MacBook Pro (late 2011) | 2,5GBz Intel Core i7 | 8GB Ram, 1333 MHz DDR3 | AMD Radeon HD 6670M 1024 MB | OSX Yosemite 10.10.1 | 750GB storage

    SLEEP WAKE FAILURE
    My early 2011 15” MBP started having a problem recently when waking from sleep after about 4hrs. I put it to sleep from the menu. Console says “Sleep Wake Failure”. Login field is frozen. I have a 27” display connected via thunderbolt-DVI. If I disconnect thunderbolt port and USB’s before putting it sleep seems to help
    Maverick 10.9.5

  • Mid-2010 Macbook Pro Screen Flicker Pixel Seizure

    Not sure how else to describe the problem, but I hope the title helps!
    I have a mid-2010 15" MacBook Pro. I noticed in the last month or so, my screen would flicker. But not the entire screen. Just certain areas, like the pixels would jump/lag, as if it it would jump to the correct position. I don't know what's the word for it: glitter, pixel, flicker, seizure. I mean, that what it looks like. It actually hurts my eyes.
    I don't know what could be the problem or if anyone knows what's going on. It's just certain pixels (random on the screen, but usually right in the middle) that get "stuck" and half a second later, jump. Not sure what the proper word is, but if anyone could identify it, that'll be great.
    Safari, Chrome, and Word are the applications I use, and I've seen it all three programs. It's becoming a lot more noticeable and frequent now, especially if I switch programs or if I'm loading a new page.
    The MBP is a tank, but I've been considering buying a new MacBook, preferably the Air, until this MBP kicks it, so if anyone has estimation on its shelf life, that'll be great (My 2005 Powerbook G4 barely made it through 4 years!). The warranty on the MBP just expired last year.
    Thanks in advance, I appreciate any insight on the issue.

    Curiously, I don't have that option. It only gives me the option to disable Automatic graphics switching where it should give the better battery life or higher performance options. Do I have something disabled that gets rid of that option? It's the same under the Battery or Power Adapter options.
    I'm going to take it to a genius but I'm wondering from reading other forums that maybe one of my RAM slots is bad. I want to have a play but will the genius know if I've opened it up and then possibly refuse it? If it is bad RAM then I can fix that myself without having to travel 70 miles to my nearest Apple Store. Is there a seal that I would break that would give away the fact that I've opened it up?
    Thanks for the advice so far.

  • My macbook pro is extremely slow on start up.

    A message appears "You Mac OS X startup disk has not more space available for application memory."  What to do?

    See "Boot drive is getting filled up"
    Why is my computer slow?
    See "Storage Drive" here
    Most commonly used backup methods
    If you can't boot the computer,
    see 7b here
    Step by Step to fix your Mac
    and/or
    Create a data recovery/undelete external boot drive
    to free up room on your boot drive.

  • Macbook Pro 10.6.8 - 4GB started running extremely slowly.

    All of a sudden my Macbook Pro 10.6.8 - 4GB started running extremely slowly. I verified the disk and got an OK.  I have plenty of memory. Any clue?

    I do need to learn how to use the communities...sorry. First time.
    I do have lots of free disk space though.
    The problem seems to be solved, after a whole day searching for help on the net.
    I read somewhere to check my Console.app for repeated information. Then I saw my Mackeeper antivirus was sending the same message every 5 seconds for the last 15 hours. Thousands and thousands of the same message. I turned off the Real-time Protection, restarted the computer and all is fine. Just can't believe it.
    Where I live it is kind of hard to get assistance.
    Tks for your help.

  • MacBook Pro won't boot at start.  I get a white screen with a blinking folder with a question mark in the middle. Any ideas?

    MacBook Pro won't boot at start.  I get a white screen with a blinking folder with a question mark in the middle. Any ideas?

    Read this article...
    http://support.apple.com/kb/TS1440?viewlocale=en_US&locale=en_US

  • How I can unlock an encryption on my macbook pro ? device is not starting only with sos sound & black screen I don't know what should do ?

    how I can unlock an encryption on my macbook pro ? device is not starting only with sos sound & black screen I don't know what should do ?

    You have to take the computer to the Apple store.
    http://support.apple.com/kb/HT4790
    Best.

  • Plz help. MacBook Pro doesn't want to start up. Stays on white screen starting up!

    Ok, so my MacBook Pro is not starting up properly. When I shut it down and turn it back on my Mac just froze on the white screen when starting it up. All I have now is a start up blank screen with the apple and the small spinning wheel below it. Just like starting you MacBook normally but instead it just stays there with the wheel spinning for minutes!!! Nothing come up. Not my sign in screen but the white screen. Pls help!!!

    hoangtu23 wrote:
    I have this question too.
    Below is video record of my macbook pro screen:
    http://www.youtube.com/watch?v=8xThWNuw7t0
    For hoangtu23, looks like you have a graphics card problem that will need a visit to an Apple Store (make a genius bar apointment first) or to a Apple authorized service center.

  • TS3423 My MacBook Pro freezes on the blue start up screen. What can I do?

    My MacBook Pro freezes on the blue start up screen. What can I do?

    See if this will help:
    http://support.apple.com/kb/PH7212
    Ciao.

  • Gray and white smudges in MacBook Pro Screen

    About 1 week ago, I noticed 2 faint grey smudges in the middle of my MacBook Pro screen. I dismissed it at the time because I could barely see them unless I looked extremely close on a dark screen. I opened my computer up yesterday to see that the amount of spots had tripled from 2 to 6, are becoming more apparent, and  all in the same area in the middle of the screen. They are still only able to be seen on a dark screen. The smudges are about the size of the cursor Also, when I tilt my head or tilt my laptop screen far back on a white screen, I can see that those spots turn slightly brighter white than the rest of the screen. While the grey smudges aren't connected, these white areas appear to connect to make a circle.
    Another quick note, in December, I had a similar problem with my screen. The white spots were in the same circular shape and clear on any background, however, instead of grey smudges, I had spots that were black in the exact same circular shape. Apple labeled it as pixel anomalies and replaced my screen for me with no problems. Do you think it is pixel anomalies or something different? I bought the laptop in September 2011 and it is under every

    Take it in for repairs while you are still under warranty.

  • Macbook pro screen dims after waking from sleep?

    Does anyone know why my macbook pro screen dims when waking from sleep or waking from my screen saver? I can't get it to stop doing this. Thanks.

    It sounds like I have the same thing happening. It's more like the colors are washed out, like there is less contrast. I have a hot corner set up for my screen saver. Once I activate the screen saver for a second and then deactivate it, the Macbook screen goes back to normal. I have a 30" Samsung 305T monitor set up as a second (main) screen for when I'm working at home, which is most of the time. I haven't had it unplugged from the Macbook since this started, so I don't know if it happens by itself. I do know that the Samsung looks fine when waking up from the screen saver at the same time.
    I tried to find others with this problem in this forum, but got tired of looking through all the other posts that had nothing to do with this problem.
    Can anyone help us?

  • My MacBook pro screen is broken (awaiting part for repair) can I transfer keynotes pres onto iPad air? Without a home screen to navigate?

    I am eagerly awaiting the correct parts to repair my MacBook pro screen (my husband dropped it). I have an iPad air but for some reason iCloud has only stored a very old copy of a keynotes presentation I need? Anyway to transfer with being able to see MacBook screen to guide me?
    Cheers

    You misunderstand the memory management scheme and misinterpret the display you're seeing.
    To start with, free memory is wasted memory. Once some disk contents have been brought in, it is wasteful to discard that data just to make the RAM that it occupied "free." Inactive memory is memory that is not currently used, can be given to an application that needs it without doing any disk I/O (or used as a destination for reading disk content) but which currently holds disk data that might be useful in the future. I.e., it's file content of some sort.
    To get a better idea of how Mac OS X manages RAM and how to interpret the Activity Monitory dispaly, see this tech note: Mac OS X: Reading system memory usage in Activity Monitor.
    Rosetta is indeed memory hungry, but it's an interim solution. With 2 GB of RAM installed, you can run a lot of applications with alacrity.
    Lastly, your Safari, an Intel-native application, is currently using 2 GB. This is a known issue with Safari, though it seems to me that it has gotten better since 2.0.3 was released in 10.4.6. Still, it's a bit of a memory hog, to be sure. Now that Firefox, Camino and Seamonkey are all available in Universal (Intel native) forms, you have alternatives. Firefox seems a lot more parsimonious when it comes to RAM.
    Randall Schulz

  • My 13 in MacBook Pro screen randomly goes black.  It was purchased in 2010.  It's a 10.6.8.

    My 13 in MacBook Pro screen randomly goes black.  It was purchased in 2010.  It's a 10.6.8.  It started just recently.  The only thing I can think of is is that my 7 year old son played an online game with the computer.  I did check the "hot corners" settings and that is not the issue.  When the screen goes black, I generally end of foce shutting it down with the power button. 

    My 13 in MacBook Pro screen randomly goes black.  It was purchased in 2010.  It's a 10.6.8.  It started just recently.  The only thing I can think of is is that my 7 year old son played an online game with the computer.  I did check the "hot corners" settings and that is not the issue.  When the screen goes black, I generally end of foce shutting it down with the power button. 

  • 2.2ghz macbook pro screen

    Hi, my macbook pro screen cracked after 8 days. I bought a replacement screen brand new online. I have 2 questions, first my machine is the 2.2ghz macbook pro that was 1999.99 list price. Is the screen I purchased the correct one? its model number M9969LL/A and approximately how much labor time should I expect to pay for to re-install this?
    Is it true that apple does not cover these? The machine did not drop or anything and there is no damage to it. There is just a black circle then a spider web of glass on the inside and then all the pixels have turned to colored lines.
    Thanks and I hope you all had a great Thanksgiving!!
    Steve

    I have the Early 2011 2GHz Macbook Pro and I have the same problem too.
    I switched out the logicboard a month ago and today the graphics just went distorted.
    Any solutions? Now I'm thinking it is the Graphics Card.

  • MacBook Pro doesn't want to start up anymore.

    My MacBook Pro doesn't want to start up anymore.
    When I turn it on, it turns on, followed by a white/light grey screen with apple logo. After a while a loading wheel appears beneath the logo and a loading bar beneath it. The loading bar loads to about 1/5 and then disappears, leaving the computer stuck on the the white screen with the apple logo and the loading wheel.
    I tried to reset the PRAM, but it didn't help, it only got the startup sound to play when I turn the MacBook on.
    What can I do about this? Hopefully I don't need to lose my files.
    Thanks in advance,
    Emil

    lonelyplanet wrote:
    Seems like I have to use my Time Machine backup drive to reinstall the OS.
    No you don't.
    OS X can be reinstalled all by itself leaving the programs and files alone, provided the drive is working correctly.
    I'm not quite sure how to recover the files from Macintosh HD that I don't want to be deleted during this process.
    The TM drive is almost useless because you can't boot from it to recover your latest files with.
    That's why I gave the link  for the undelete boot drive, you create and boot from that, access your internal drive and grab files, then you can restore from TM or other things, like the repair list of fixes I gave you.
    Could you help me a little on how to backup files manually most easily?
    The problem is your machine isn't booting to grab the files.
    So you need to create a external boot drive, then you can access the internal boot drive directly and grab files out of your Music, Pictures, Movies, Documents folders (etc) to the external boot drive.
    Most commonly used backup methods
    Or is there a way to do this without deleting all of the files in my user folders on Macintosh HD?
    Yes, you can choose to create a
    Create a data recovery, undelete boot drive
    and recover your filesnow , or you can chose to try fixing the machine without recovering your files, but your taking your chances as we don't know how seriously wrong it is yet.
    If your willing to take a risk then proceed through this list, Step 1 - 8 etc., until the machine boots up.
    Step by Step to fix your Mac
    If the machine doesn't boot up then you need to create the external boot drive to get the files before proceeding with further steps.
    If this is too much for you, then call a local PC/Mac data recovery/repair service and they will handle it for a large fee.

Maybe you are looking for

  • WHT tax not displaying in accounting document

    Hi I am trying to configure Withholding tax for AR process. I have attached the WHT tax type and code in the customer master. I try to create a debit note request, i do not get a popup which shows the WHT from the customer master for us to choose the

  • Appending a dynamic where clause in VO

    Hi All I am trying append a where clause dnamically to a VO The query is SELECT DISTINCT pvsa.org_id AS OrgId, GECMPoVendorsEO.VENDOR_ID AS SupplierId, GECMPoVendorsEO.VENDOR_NAME AS SupplierName, GECMPoVendorsEO.STANDARD_INDUSTRY_CLASS AS StdIndustr

  • Purchase Order Item Shipping Data Update

    Hi xperts, I need to update shipping data of purchase order item. I need to update the Unloading Point (ablad) field. Inside exit 'EXIT_SAPMM06E_013' I am changing value of field xekpv-ablad. but the value is not updated in the purchase order. Please

  • Regarding Transfer BR

    Hi All, I successfully copied the data to the new combination of the "To department" by using Transfer BR in WFP but facing below two issues: a) The data is copied from the next month of the Transfer Month as in the run time prompt. b) I need to dele

  • CS6 Installation problem

    I was having difficulty installing the adobe CS6.  I was on a chat with technical support (Adobe) and the individual told me to create a new foler on my C: drive and install there.  The program does not work and I do not know how to uninstall it.  He