Macbook pro screen vs macbook air screen - Color "capability"?
Hi,
I've been trying to find information comparing the late 2011 15" Macbook Pro with high-res screen vs the 11" or 13" macbook air screens but I could only find one answer saying that the color gamut on the MBP is much better (wider) that on the MBA.
I think I've been around the other factosr (speed, memory, weight, size, etc..) between MBP and MBA but the last thing I wanted to figure out was the screen. I am into photography and I wanted an Apple laptop that shows the "best" colors. I think that will definitely make an enormous difference in my decision between MBP and MBA.
Any thougts on that? Maybe you know some tests that have been done on color rendition?
I was going to post this in the MBA discussion section but I thought I'd see what kind of feedback I can get here first.
thanks a lot!!
The MacBook Pro 13" screen resultion is1440 x 900 which is actually higher than the 13" MacBook Pro, which has a 1280 x 800 screen. In fact, the MBA 13's resolution is equivalent to the MBP 15's resolution, which is also 1440 x 900. So, if you are looking at that point, and that point only, the 13" MBA is pretty nice. It's the lack of a dedicated graphics card, limited RAM (I believe it's soldered into the motherboard), slower CPU (dual core i5), no Super Drive and a few other things that swing it over to the 15"MBP.
I think the MBA has it's place. It's a big step above the iPad in usability. But it's a big step down from the upper end of the MBP platform. The only place where it gets close to flipping a coin is the 13" MBP vs. MBA. I'd take the MBA almost every time.
Similar Messages
-
As the topic says,
What cable do I need to buy to connect my Macbook Pro (2011) to a VGA screen? I tried the "Mini DisplayPort to VGA", but apparently it doesnt fit the 2011 Pro version...
Help me out please.Yes ... minidisplay
But what I do not like in that picture (my personal view, others may think differently), is that there is much plastic around the connectors where the cable must fit. You may ot may not be able to get the cable to *fully seat* with the adapter.
Other adapters (http://www.microcenter.com/single_product_results.phtml?product_id=0334087, yes I know this is a DVI) hve no plastic barriers to connections. -
My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help I have tried everything I know to do
Unfortunately this means that there is a problem in the boot sector of your hard drive. It might be indicative of a fundamental corruption in the coding that allows your computer to boot your operating system from your hard drive. I had this problem twice and it resulted in me having to get a new hard drive and restore my data.
In other words, your computer can't talk to your operating system so you can't access your data.
Here is my advice: DON'T CALL APPLE TECH SUPPORT though they are kind and usually helpful it will take you an hour just to explain the situation and they will only tell you to do what I'm gonna say here.
First: Shut down your computer completely
Two: boot up while holding down the following keys: command, option, p, and r. The computer will reboot 3 times. This solution will likely fail so if you're frustrated skip to the next step.
Three: Boot up while holding down the option key. Select recovery drive. Select your default language. Select disk utility, click on Macintosh HD, and select "verify and repair volume." Likely the verification will produce some line like "unused node not erased." Or something like that. If anything using the words "node structure" comes up, you need a new hard drive.
If after verification and repairs you still can't boot I sincerely hope you have apple care because you will need a new hard drive. Set up an appointment to come in to the apple store, they will tell you to go and get data recovery, just ask them to give you the old hard drive. Unless you have an up to date backup in which case you can just restore from that. If you're lucky the only issue is with the boot sector which means that if you ask them to give you the old hard drive, you can buy an enclosure and you have effectively been given a free external hard drive. It still works to store data just not to load an operating system.
If you have a back up drive bring it to the apple store and they'll do the whole thing right there, it should take around an hour and a half but may take longer.
Hope this helps, it's annoying but it's your safest bet.
All the best. -
How to erase a Macbook Pro Hard drive when the screen is dead
I have a Macbook Pro (2007) with a dead screen and a motherboard issue. Just bought a new macbook and i was planning on transfering the hard drive over and selling my pro on ebay for parts, Is there anyway i can securely delete my data from the computer without seeing it on the screen before i decide to sell it?
Be sure your dead Mac isn't covered by this program:
http://support.apple.com/kb/TS2377
If it is, you can get a free repair, and it would be worth a lot more on EBay.
Good luck! -
Power on MacBook Pro takes me to login screen. All user icons appear as normal. Once I enter password for myself (administrator) spinning takes longer than normal and doesn't log in but displays a no sign (circle w line through it) when attempting to login from guest account it takes me to screen that says that the computer will restart to a safe safari system for the guest user. I waited for a longer time and the grey denim screen comes up. By the apple in left upper corner it said I think LSA? Then safari menu bar. The page it loads to us file:///System/Installation/CDIS/Mac%2005%20X%20Utilities.app/Contents/Resource s/English.iproj/GuestLoginInfirmation.html
Can someone HELP? I'm afraid I might do something wrongWhat backups do you have?
-
i have reset my macbook pro to factory reset the screen is now asking me to put in my details, do i have too as if i am showing it to someone they need to be able to see it working but does that not mean that my name will be on it. please help
Use a alias, but you might have to use a zip code that matches the location used.
Also if you click the right button there is a way to bypass the registration, like register later or something, Apple has it hidden. Also to bypass the internet connection to send the registration off.
Never place your name on a Mac or PC, it's spread throughout the entire machine, in emails, on the network in plain sight etc. -
When I turn on my Macbook Pro and sign in, the screen is blank, none of the icons appear, I can't click, open or do anything! Help!
You could try this; Mac OS X: Starting up in Safe Mode.It takes awhile to come up so patience is a virtue here.
And here is What is Safe Mode.
DALE -
Why won't my MacBook Pro start up? White screen and flashing question mark.
Hi,
I've had my MacBook Pro for almost 2 years now and I installed OS X 10.8 about 4 months ago.
Today I turned the MacBook Pro on and a white screen with a flashing question mark appeared. I tried then getting the startup manager up: turning on the laptop and immediately holding in alt (option). But nothing appeared for about 25 seconds until a rotating Earth labelled 'Internet recovery' appeared that gave me options to join wireless connections. However, my internet wasn't in the options and when I tried typing in the information required to join my internet the laptop would just load and never find it.
I then tried putting in my Mac OS X install DVD (10.6.7) and help in C until the apple logo appeared on the screen and the little rotating loading circle appeared. That then disappeared and a cicle with a cross through it appeared (similar to a no entry sign). Then after about 30 seconds a blue screen followed by a grey screen appeared until eventually the disc ran properly. I then went into Disk Utility but there was no option called Macintosh HD, only the discs content. It wouldn't let me first aid, erase or repair anything.
I'm totally stumped and have 4 exams at university within the next 2 weeks. I'd really appreciate it if anyone could help me out here?
Thanks,
Best wishes,
ConnorThe support article linked below is somewhat outdated. Where it refers to starting up from an installation disc, you should instead start up in Recovery by holding down the key combination command-R at the chime. Release the keys when you see a gray screen with a spinning dial.
If you don't have a current backup of all the data on the startup volume, and you want to preserve that data, then you must try to back up before you do anything else. Ask for instructions if you need them.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to reinstall OS X from Recovery, if necessary. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
A flashing question mark appears when you start your Mac -
My early 2008 Macbook Pro is suffering from black screen after Yosemite update
My early 2008 Macbook Pro is suffering from black screen after Yosemite update. It ran beta 5 great but failed on restart after beta 6 install. There is no cursor but I can hear the HDD spooling up. I have tried booting in safe mode, PRAM reset and SMC reset but nothing works. After the first 5 days of every now and then trying to start it, it started fine. I used the machine all day with no problems, it had rolled back the install and was back on beta 5. I decided to try the update again, the same thing happened and it has stayed black for over a week now. It wont work with a monitor either. Help!
Hello Adam,
I would try instead of installing the beta software, to install the official build of OS X Yosemite from the Mac App Store to see if that gets you passed the no video issue when updating the beta software.
How to install OS X Yosemite on your Mac
http://support.apple.com/en-us/HT6412
Regards,
-Norm G. -
2012 macbook pro retina display artifacts on screen when using onboard video
2012 Macbook Pro Retina Display artifacts on screen when using onboard video.
About a month ago I've noticed these strange artifacts (blocky pixelated looking) running vertically down the screen. It first started when using Safari. Then it started to happen all the time. I turned off the auto switch video in preferences, which I'm assuming forces the computer to use the separate video card and the artifacts go away.
On top of that issue I also have had the ghosting issue.
Anyone else have this problem?artifacts onscreen could mean a faulty gpu. You said by forcing it on inbuilt gpu you do not find this issue highlights that. Do take it in to apple for service and also tell them of your ghosting issue.
There are a few retina owners who have faulty gpus. -
Can I use MacBook pro A1211 with external monitor, screen has died but
CCan I use MacBook pro A1211 with external monitor, screen has died but computer seems fine
Hmm seems like this model has DVI out. You could just plug a standard DVI monitor into that. Or use the DVI connector (VGA supported with included adapter; S-video and composite video supported with optional adapters) adapter that came w/ your machine.
-
when i turn my macbook pro it has a black screen and it beeps 3 times in succession with a pause and then repeats the beeping and so on.
If you replaced the Ram in your machine at any time, you may not have been aware of the fact that Apple computers have always been a little picky when it comes to 3rd party Ram. Apple computers have always run very well on 2 different brands.
Memory for iMac 2GB, 4GB, 8GB, 16GB, & now 32GB - OWC Certified RAM for Apple iMac with Lifetime Warranty
This first link is from other world computing and none of us on these forums to my knowledge have heard of any bad ram from either Other World Computing
or Crucial Ram.
Crucial Ram
The only difference I am aware of is that Crucial offers a download and will tell you exactly what Ram your computer is capable of using and the prices that are available.
Resolving Kernel Panics
HOPE THIS HELPS IN SOME WAY
DON -
TS3824 My MacBook Pro freezes with a white screen after I log in.
MacBook Pro freezes with a white screen after I log in, support says to download an update, but if it
s frozen, how do I update?Thanks for posting back your solution. It will help others w/the same problem.
-
Macbook pro stuck/hangs at login screen ??
Macbook pro stuck/hangs at login screen and no any controls while i restart last time..3 days before i found many solutions but no one is perfect like PRAM/SCM format command option+p+r and other many but no any perfect solution which can fixed my issue..please help me asap i am so much upset for that coz i am developer and there is many of the data , i also run windows on it win 7 so now i am running with that i have latest 2011 mac OSX 10.7.5 with Core i5 ,4GB, 320 GB so please help me to resolve this issue i am waiting thanks in advan
Regards,
Muneeb
Developer
<Email Edited by Host>Macbook pro stuck/hangs at login screen and no any controls while i restart last time..3 days before i found many solutions but no one is perfect like PRAM/SCM format command option+p+r and other many but no any perfect solution which can fixed my issue..please help me asap i am so much upset for that coz i am developer and there is many of the data , i also run windows on it win 7 so now i am running with that i have latest 2011 mac OSX 10.7.5 with Core i5 ,4GB, 320 GB so please help me to resolve this issue i am waiting thanks in advan
Regards,
Muneeb
Developer
<Email Edited by Host> -
My facetime doesnt work. If I call somone they see I call but when they accept it doesnt work and when they call me the green camera light turns on but no sound or pop up of the video chat screen appears, please help! Macbook pro user.
MacBook Pro, OS X Mountain LionI just wanted to follow this up by saying that you were entirely correct in your diagnosis of the situation. My computer did have the faulty part you linked to. I brought my laptop in and specifically told them to run that test, had it fail and then argued with the person at the genius bar and the manager. Eventually they offered to have it sent out and have everything replaced for free of charge. They did so mainly because I had complained about graphical issues almost every other time I had come in with problems and no one ran the test. They should have caught this problem during my warranty, but they didn't, even though I mentioned the problem.
Anyhow, after having the part replaced, I haven't had my computer crash a single time since, or had many of the issues mentioned above. I've never had this experience before. Even brand new, I got occasional crashes. Hopefully this new trend continues.
I do find that web browsing is still incredibly slow. Web browsers just chug along at a slow pace, even though I have great internet speed. Maybe I'll try just deleting my web browsers and reinstalling them...
Anyhow, thank you for your help and knowledge Clinton. -
My MacBook pro is stuck on white screen after shut down. Now, neither this is turn on nor turn off.
You should be able to turn off your MBP by pressing the power button down continously for about 5-10 sec. When you reboot it you are going to want to enter into a terminal screen. Hopefully the following YouTube video helps: http://www.youtube.com/watch?v=qKOX72xNmbo
Maybe you are looking for
-
How do you download an older version of iTunes?
I recently purchased a new laptop, running on Windoes Vista 32bit home premium, and immediately downloaded iTunes onto it with no problems. Then there was a new version of iTunes - 9.0 and subsequently 9.0.1. When it came to installing the upgrade, I
-
How to make itunes recognize ipod when in disk mode
my ipod classic was in a reboot loop and after reading up about it i put my ipod into disk mode and connected it to my pc to restore it to factory settings. However when i connected it itunes hasnt recognized it despite it appearing in my computor fo
-
Premier Elements 4.0 Will not load
I am making a video from granddaughters graduation. Everything was fine last night. This morning I came in to finish it and my program will not load. It tries to load and I get to the screen with a purple circle giving the name of the product etc ..
-
My Photoshop Elements 6.0 for windows just quite working 4 days ago.
I have tried unistalling it and now i am trying to reinstalling it but it is saying needs disc one but i only have one disc? I called the support for adobe and she said they aren't allowed to help me cause 6.0 is out of date. Can anyone help me. I am
-
Lightroom 5.3 editting brush doesn't restrict edits to the selection. Win 7 uninstall didn't help
lightroom 5.3 developed an error when using the brush edit tool: the edit (eg, exposure) was not limited to the selection. I upgraded to 5.4 and then uninstalled (via programs and features in Win 7) / rebooted / reinstalled / rebooted a couple of tim