Macbook Pro Screen wakes up from sleep without any acitvity

I've set my MacBook Pro screen to turn off after two minutes of activity. I've had this setting for all my Macs and I've never had any problems.
Recently though, my MacBook Pro's screen turns on by itself without me touching the computer or any mouse attached to it. What could be the problem?
It's really annoying when the screen turns on at night.
Any help will be appreciated.

I have the same problem. I brought up console and there is nothing at the same time as the screen turning on. My situation is as follows:
I put on a podcast. The only applications running are firefox and iTunes. I turn the screen brightness all the way down with the F1 key, then mouse over the corner of the screen set to turn the monitor off.
After about 6 minutes, the screen comes back on at brightness level 1. If I touch a button or the trackpad the screen turns back off. It stays off for about 6 more minutes and does it again.
Edit: I just checked the logs with all showing and the only thing I see is a Wake Reason = EC LID0.
Any tips?

Similar Messages

  • My MacBook pro wont wake up from sleep. The screen is blank at all times, but I can hear the fan for 5 sec then everything stops. Please help! I don't kno what to do.

    My MacBook pro is about 3 yrs old. It is a 2008 model right before the new design came out. Recently I closed it up which puts it to sleep and a couple minutes later when I opened it up the screen stayed blank but could hear the fan running but then the power clicked like it was shutting down and I could hear nothing more. My power supply is working and I have already tried resetting it. Can anyone help me? I don't live exactly near a Mac store to get help.

    Before resorting to an LB change-out, try this, as it has fixed many of the "silver-key" Macbook Pros with wake-from-sleep issues:
    1) To get the computer running, do an SMC reset. Instructions here:
    http://support.apple.com/kb/HT3964
    Your MBP model uses the first option under the subhead, "Resetting the System Management Controller (SMC)"
    2) If you get it running, go to System Preferences > Network and select your Airport connection
    3) In the result main pane, click the "Advanced..." button.
    4) You should be looking at a window with multiple tabs at the top; the "Airport" tab (far left) should be active---if not, make it so.
    5) There is a panel showing "Prefered Networks." Use the "minus" button below that window to eliminate any networks that you don't need to access on more than a weekly basis. I'm down to two: the home Airport Extreme Base Station and the network for a museum at which I volunteer once a week.
    5) Click "OK" and close System Preferences.
    Now try letting it sleep and see it if wakes up.
    When this happened to my Late 2007 MBP, I used Console to read system.log and found that, on waking, the compuer was looking for the wireless network at a lodge where I'd stayed weeks earlier and miles away. Clear the morass of old networks and keeping the list short has completely cured my wake-from-sleep issues.
    The steps I listed take less time to do than to read, and are within the ability even of novice Mac users.
    If that doesn't work, you may need to seek professional help. If you take it to an Apple Store and they recommend a logic board replacement, ask about a "Depot Repair." Instead of replacing the logic board on-site (which will whack you to the tune of US$700-1100), they send the computer to a central Apple refurb facility that fixes whatever they find wrong for a flat fee of about US$315 (last time someone reported using the service here). Turnaround is about one working week, and people who have taken of this service have reported being very pleased with the outcome.
    You don't show a geographic location. This service may not be available if you are outside North America.

  • Why does my macbook pro not wake up from sleep?

    I have a brand new Macbook Pro 13inch. It freezes up when I try to wake it from sleep. I was wondering if there is a fix for this.

    Hello,
    Thanks for visiting the Apple Support Community!  Have you performed all of the software updates on your MacBook Pro?
    To do this:
    1. Click the Apple Logo in the top left
    2. Choose "Software Update"
    3. Click "Check for Updates"
    Install any available updates and restart your Mac. Let us know if this resolves it or not.  Additionally, you have posted in the iPhone Discussion area; for future reference please post in the correct category.
    Thanks!

  • April 2006 macbook pro core2duo wakes up from sleep with in sleeve

    The title pretty much sums it up, The past couple of days I've gotten home from work and my macbook pro will have the screen on, and running. I have no open programs, I have reset the pram and the cmu to no avail. This really concerns me, I'm wondering if anyone has any insight. I made an appointment at the genius bar tomorrow, but I know that the problem won't be able to replicate when I get there. Just seeing if anyone else has encountered this.
    Thanks

    Welcome to Apple Discussions!
    There are a couple of things to check.
    First, be sure the Mac is truly asleep before you put it in the sleeve.
    Second, be sure the latch is working properly. If the lid pops open because the latch pops loose, the Mac could wake up.
    Otherwise, good luck at the Genius bar.

  • Leopard: MacBook Pro rarely wakes up from sleep

    Hey all,
    I just installed Leopard last weekend, and have noticed that at least half the time when i shut the lid and put my computer to sleep that it will not wake up when i re-open it. it is not an issue of power supply because this happens when i have the computer charged decently and even plugged in.
    any suggestions?
    thanks a lot

    Same problem here. Of course Apple support is vacant on this issue. I think its time for Consumerist. This issue has been posted dozens of times with no response from Apple. Other options are if you purchased with American Express you could probably get them to force a repair/replace.

  • Mac pro wont wake up from sleep

    mac pro wont wake up from sleep, now what?

    mac pro wont wake up from sleep, now what?

  • My early 2008 MacBook won't wake up from sleep

    My early 2008 MacBook won't wake up from sleep periodically. I will have to hold the power button down and then restart when it acks up. It did this twice yesterday & once today.

    Try resetting the PMU (power management unit).
    Remove battery and power adapter.
    Hold down power button for 10 seconds.
    Reinstall battery and attach power adapter.
    Hold down Command-Option-P-R, a total of four keys, and press power button. Don't release the keys.
    Continue holding the four keys until you hear the startup sound twice, then release.

  • MacBook won't wake up from sleep / boot up.

    My MacBook has trouble waking up from sleep, and sometimes booting up from a normal shutdown. When I open the clamshell after I put the computer to sleep, the indicator light doesn't blink, but is lit up, and the screen is completely blank. Pressed all keys, and still it won't wake up. I've had the same problem with booting up the computer from a normal shutdown as well. I've tried holding on to the power key and doing a hard reset, but nothing seems to work. However, I can't seem to pinpoint the cause of this problem, it seems to be completely arbitrary. Sometimes, it wakes without a problem, and sometimes it just stays in "zombie" mode for .. extended periods of time.
    I've also resetted the PMU, and the NVRAM as well. I'm not sure how this could affect it, but a few days ago, my CD drive broke. When I tried to boot up, the CD drive seemed to be turning to find a CD, and couldn't boot up. So I took it to the Apple guy and got the CD drive removed completely. I took the MacBook back to him with this waking up problem, and he says it's fixed, but it really isn't.
    Help! I can't

    I can't boot up MacBook and I,m wondering if you tried SafeBoot. I went through the process, got the progress bar, then nothing. Just more blue screen and gear spinning.
    See http://support.apple.com/kb/TS1417?viewlocale=en_US

  • MacBook won't "wake" up from sleep, when being folded

    When I "fold" computer it goes to sleep. But, when I flip up the screen again, my Mac won't "wake" up from sleep mode anymore.
    Do anyone know how to fix this problem?
    BR
    Christian
    I have a MacBook 2.26 GHz Intel Core 2 duo, Snow Leopard 10.6.8.

    I've solved my problem.
    I have reset my MacBook's PRAM settings.
    It's very easy: link: http://support.apple.com/kb/HT1379
    Resetting PRAM and NVRAM
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    Your computer's PRAM and the NVRAM are reset to the default values. The clock settings may be reset to a default date on some models.
    Hope this helps
    Best regards,
    Christian

  • Macbook Pro beeping when waking from sleep

    I have just upgraded from Lion to Moutain Lion. Before upgrading I did all the usual disk check and stuff. But currently when my computer wakes up from sleep there is a loud beeping and black screen, I have to force shut down to use the notebook. This have happen twice. Once yesterday morning and today evening. I installed Moutain Lion on 2 Aug.
    - Yesterday Morning
    Went out left the computer on to download stuff, my notebook is always set to sleep after 1hr after I came back turn on the computer there is loud beeping had to force shut down.
    Search the internet found it could be a corrupt sleep image file or ram problem. I did a memory test no problems. Therefore I accepted that it could be a once off corrupted sleep image file as I was not at home when the computer went to sleep.
    After I rebooted there is this message that the computer recovered from a system problem.
    - Today Evening
    Went out decided to use Deep Sleep a dashboard widget for hibernation after I came back home the computer was running and there is the lound beeping. The computer was hot so it have turn on for sometime.
    There is no message that the computer recovered from a system problem this time.
    But there is this existing issue even with Lion. The computer will sometimes wakeup from its sleep. I have tried clicking sleep from the menu bar and the dashboard widget both have the same problem. I tried tweaking the sleep setting after searching for this issue online. But after sometime the problem returns.
    But there is no loud beeping. Just a hot computer running since the lid was close. So the problem was not an issue at first.
    I have also notice before upgrading to moutain lion when I was next to the notebook and while it is still sleeping it will sometimes make the usual noise when starting up or booting from sleep. But when I open the lid it is still asleep. I think the noise is from the dvd drive not too sure.
    So the issue occured before upgrading and got worst after upgrading. What should I do? I have tried looking at console but don't seem to find a clue what log file shoud I be checking?

    Ok I have send a request for a call back request. Hopefully I can speak to someone with a technical background and not ask me to go through a series of standard steps.
    The notebook is running great no problems or issues. No kernal panic or problems booting. No traces in the log file of what went wrong. Previously in lion when the computer wakes up from sleep I could check the cause in console but as the computer now goes into beeping when waking up in moutain lion there is no traces at all.

  • My macbook pro wont wake up from a normal sleep

    ive had my macbook pro since december of 2010 and it has worked great up until like september of 2012. i upgraded my software to lion about a couple weeks after it came out and i dont really know much about computers, i use mine for school and personal use like photos and music basically. it crashed around thanksgiving 2012 and i had to get my hard drive replaced and im still having these problems. is there anything i can do or should i take it to the apple store? and i would like anything i can do before i take it in please

    ive had my macbook pro since december of 2010 and it has worked great up until like september of 2012. i upgraded my software to lion about a couple weeks after it came out and i dont really know much about computers, i use mine for school and personal use like photos and music basically. it crashed around thanksgiving 2012 and i had to get my hard drive replaced and im still having these problems. is there anything i can do or should i take it to the apple store? and i would like anything i can do before i take it in please

  • Macbook Pro will not rewake from sleep, but is running?

    My Macbook pro with OSX Lion and Core 2 Duo will not wake from sleep. The screen stays black (as if it were off) but I can hear the fans running and the light
    on the front stays on steady.      I have tried to hold down the power button to shut it off- Didn't Work         I have drained the battery and restart- Didn't work

    like mine... http://www.youtube.com/watch?v=C-ZFewhxYi0

  • MacBook Pro freezes when returning from sleep

    I recently started using a Kensington Bluetooth mouse with my MacBook Pro and the computer freezes whenever I return the computer from sleep. Nothing happens when I press Command-Option-Esc. The mouse pointer moves on the screen and the dock magnification works, but I'm not able to open any programs.
    I've confirmed that it has something to do with Bluetooth because I now turn off Bluetooth before returning it to sleep and it works fine. I just have to turn on Bluetooth using the trackpad and then I can use the mouse again. I'm thinking that this shouldn't be a requirement though.
    Has anyone else had this problem? Is there anything I can do to resolve?
    I appreciate any assistance!
    Thank you,
    Chris
    Mouse: Kensington PilotMouse Mini Bluetooth
    Bluetooth Version: 3.1965 (3.1965)

    For those of you who are interested, I think I've isolated the issue. If I turn off the option to allow Bluetooth devices to wake the computer from sleep, my computer doesn't freeze when I return from sleep. This is a better option for me than turning off Bluetooth before I put the computer to sleep.
    Let me know if you have any questions.

  • Macbook Pro not always waking from sleep

    The only time I sleep my Macbook Pro is when I close the cover. Before I open it, I make sure that the light on the front is pulsating, indicating it is fully asleep.
    Sometimes when I open it is is waking up fine, and other times the screen just stays black and the light on the front remains pulsating. When the screen is black, pressing the power button or shutting the screen and opening it again has no effect - the only thing I can do is hold down the power button for 10 seconds and restart my computer.
    This only recently started happening. I'm running 10.5.4, but it started happening with 10.5.3, although I don't think it's system related because it didn't start right after I upgraded to 10.5.3 but some time after, only about 2 weeks ago from today.
    Any help on this matter would be appreciated!

    if you do a search, you will find other threads related to the sleep issue, and might find some insight there . . .
    it is strange, i was having the problem too, where the sleep problem would happen intermittently. after i realized there was a problem i stopped putting my mbp to sleep. but recently i have started to use the sleep mode for my mbp, and have not had this problem again.
    have you consulted with apple on your issue?

  • Macbook Pro restart after waking from sleep

    Hi all,
    Since I've installed Mountain Lion (10.8.2) on my 13" Late 2011 Macbook Pro I've been experiencing a quite annoying problem. The computer, which is connected to an external monitor through Thunderbolt to HDMI will restart (Sometimes to a gray screen with a progress bar) after waking from sleep. I've done some research and it would appear as though the problem is related to the display driver.
    I'm wondering if anyone has any experience with this peculiar problem or if there's a quick solution.
    Thanks!

    Maybe this will help. If you monitor the "More Like This" box, other solved threads appear. Opening them usually displays other threads.
    https://discussions.apple.com/message/19675376#19675376

Maybe you are looking for

  • Accounting Doc issue

    Hi , i created 3 different condition types for different Agents. I maintained the condition record with combination of Customer / Agent i created a billing document and saved but when i click the accounting system is not showing the commission relate

  • ERROR HANDLING FOR CLIENT_OLE2 FUNCTIONS

    We have added spell checking to our application using the Client_OLE2 WebUtil function using the example in the knowledge base. Unfortunately the example does not check for errors. Can someone direct me to documentation that shows return codes for th

  • .ipsw file in my trash?

    I just happened to look in my trash and noticed that this file was there: iPhone3,14.3_8F190Restore.ipsw I never deleted any files like this, so I don't know how it ended up there. I have an iPhone 4 that has been running ios 4.3 since it came out bu

  • I forgot my encrypt iPhone backup password

    I lost my password to the encrypt iPhone backup. How do I reset it? I don't need to restore my phone, but I would like to be able to access my future backups in case something happens to my iPhone 4s. How do I reset it and if I can't reset it, what d

  • XML conversion for special charaters & , , etc..

    Hi , I'm trying to generate a XML file to send the sales order details , in the when ever there are special charaters like & < etc.. it's getting converted to & LT; etc... I'm using IF_IXML interface and create_text method to convert the text in R/3