Macbook pro shows incorrect storage information on SSD.

I am using a macbook pro. The storage information is shown wrongly. Control I shows the correct information but finder and space bar on the hard disk show incorrect storage information. Used space is actually 122 GB which is shown as 140 GB. Even omnidiskkeeper shows the breakup of 122 GB but the storage information summary shows 140GB.

   Re-index Macintosh HD.
   Spotlight reindexing will take a while to finish.
   System Preferences > Spotlight > Privacy
   http://support.apple.com/kb/ht2409

Similar Messages

Mac shows wrong storage information

Hi,
My macbook shows incorrect storage information, which is inconsistent with the available storage space.
The storage maps shows that:
App 119G with 179G free from 250 G
Which does not added up correctly.
I have tried to use disk repair in recovery mode but the storage is still wrong.
I'm using 10.10.1 OS X yosemite on my macbook
I do not use time machine.
Is there any way to solve this issue?
Thank you.

Hi joannnnnnnn,
If you are using a MacBook Pro or MacBook Air with a solid state drive (SSD), you may notice some discrepancies in the available, used, and total storage reporting. If this is the case, you may find the following article helpful:
Mac notebooks: Mac OS X and Solid State Drive manufacturers report drive capacity differently - Apple Support
Regards,
- Brenden

"other" shows wrong storage information

Hi all,
My system is mountain lion, today I found that "other" shows zero KB. However, according to the graph bar, "other" should have almost 100 GB. So it dosen't
make sense at all for "other" only showing zero KB.. Last time I checked the storage of my laptop, "other" can indicate right storage space... I dont know what happened to my system to show incorrect storage information..
Does anyone have the situation like me before?
Any helps appreciated!

I had exactly the same problem but with 105 GB of yellow 'other' space on a 250 GB disk . I used Omidisk to give me a proper readout of what all the yellow was and it was mostly hidden files left by appplications I previously used that wasn't deleted when I removed them. Thunderbird mail was one of the main culprits.
If anyone knows of a good way of optimising disk space that doesn't require completely rebuilding the computer's Spotlight index then please let us know.

MacBook Pro shows 356gb of App Storage

My MacBook Pro shows 356gb used for apps but when I click Get Info for the Applications folder it only shows 9gb used.
9gb to 356gb is a significant jump.. Is there any way I could delete this or find the 300gb+ excess of storage is?

Probably you do not have 356 GB of apps on your computer, so you can try reindexing your hard drive. Follow the steps given in this Apple support article to do so -> Spotlight: How to re-index folders or volumes - Apple Support (you have to reindex "Macintosh HD").

My MacBook Pro shows a grey screen at start-up how do I fix this problem?

My MacBook Pro shows a grey screen when I try to login and won't go onto my homepage. Why has this happened and how do I fix it?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My Macbook Pro wont boot after upgrading to SSD, A ? Mark on Folder appears

Hello all,
I just put in a new SSD into my mid 2012, 13" macbook pro. This is the exact SSD http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=77394 89&tab=7&SRCCODE=WEBLET03ORDER&cm_mmc=Email-_-WebletMain-_-WEBLET03ORDER-_-Deals &utm_source=EML&utm_medium=main&utm_campaign=WEBLET03ORDER&cm_lm=noahbragg@cedar ville.edu
I swapped out my optical drive and put in the SSD using this tutorial, http://www.ifixit.com/Guide/Installing+MacBook+Pro+13-Inch+Unibody+Mid+2012+Dual +Hard+Drive/13787 Everything seemed to go fine and i had no problems. But when I tried to start up the computer it stayed on a gray screen and a foler with a question mark on it, showed up blanking. I have looked all over for the internet for the answer, I have tried to reset the PRAM but it did nothing. I then tried to select what drive i wanted to boot from by holding the option key when i booted, but when the options came up, SSD or old harddrive did not come up as a way to boot up. There were some internet options to recover but they did not work.
The SSD has nothing on it at this point, but my plan was to boot up using the original HD and then clone it over to the SSD, but ovbiously i cant even find the HD to boot to. I have seen that people are having troubles with booting to their SSD because of the new mavericks update, but i am just trying to boot to my original HD at this point.
I also considered that maybe i possibly damaged the HD cables through static electricty, but when i searched more about it i learned that i should have heard snap or felt a jolt. None of these things happened when i installed the SSD. So i beleive that the hard drive or SSD are not broken in any way.
Does anyone have any ideas or suggestions on how i can fix this? Need my computer very badly! thanks in advance.

I also forgot to mention that after the first time i tried to boot, it went to the normal screen where it wanted me to put in my apple id password. but the loading wheel was just spinning the whole time. so i turned off the computer and tried again. thats when the question mark folder came up and kept coming up everytime after that.

Would be an Macbook Pro with Retina screen with 128gb ssd enough?

Heya there!
I'm gonna begin with college in 2 months in The Netherlands.
I am gonna do Programming such as: Php, html, jquery, mysql and much more. (It must be to have microsoft office on my laptop, and I guess also adobe PS, Illustrator, dreamweaver and much more..)
I'm thinking of buying a macbook pro with 8gb and 128 gb ssd, but im consired if 128 gb is enough...
Should I get a macbook pro with 256gb ssd and 8 gb ram for € 1.407,23, or a macbook pro with 8 gb ram and 128 gb ssd for: € 1.314,06..
I will also get a 70 euro giftcard, what should I buy which would be good for me to take with to the college?
Greets,
Tayfun

I suggest that you contact the department at the school where you will be studying and pose that question to them. Understand that at the present time, there are no third party storage options available allowing you to increase storage. If you exceed the storage of the MBP, you will be forced to rely on an external HDD.
Ciao.

My Macbook Pro shows the apple and spinning wheel at start up but won't continue startup. Any Help would be appreciated.

My Macbook Pro shows the Apple and spinning wheel at startup but will not continue the startup. Does anybody know how to get past this, so the computer continues to startup?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 9
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

IMessage on MacBook Pro shows i'm my friend. My friend's photo and name shows in every conversation instead of mine. How do I fix this?

iMessage on MacBook Pro shows i'm my friend. My friend's photo and name shows in every conversation instead of mine. How do I fix this?

I am using my own Apple ID. (My father doesn't even have one). I seem to recall having to select a contact or something to assign to my iMessage app when I used it the first time on my iPad. I checked the settings and it is set to my apple ID and correct email address. Any other ideas?

I have iphone 5s which when i connect to import the pictures directly to my windows computer. a folder by the name of my phone appears in "My Computer" . when i open it, it shows the storage information and one icon to click on. when opened it shows

i have iphone 5s which when i connect to import the pictures directly to my windows computer. a folder by the name of my phone appears in "My Computer" . when i open it, it shows the storage information and one icon to click on. when opened it shows a couple of folders to click upon to view pictures. when i open the pictures folder and delete all the pictures , even then a lots of unclickable windows icons remain
i have attached the picture of that window's screenshot. plus when ever i try deleting them it says,
please help!.. i shall be really thankful.
iPhone 5s, iOS 8

I have the same issue and it has to do with iOS 8.2
Apple, please mend this ASAP. Really stupid change since iOS 8.1
If you for some reason must have many different folder make sure that you put the newst photo in the last folder so one can easily find a photo when I don't want to copy all photos to, let' say, my friend computer.

Creative Zen (16GB Model) showing incorrect song information

<Creative Zen (6GB Model) showing incorrect song information I was given a Creative Zen for christmas, and I'm very happy with it.
The only thing is, I've noticed that it seems to occasionally display the wrong title for the song it's playing. I have a playlist called RandomAll which I created using the Media Explorer software. Sometimes, when I look down at the player, I'll notice the wrong song information on screen. Not just the title or anything, but completely wrong information. For example, right now, my player is telling my that a Rihanna song is playing, and gives me all the details for that song (including the extended details if I go into the menu). But the song that's actually playing is a cover of Fraggle Rock by Me First & The Gimme Gimmes. It doesn't seem to be the same songs every time or anything like that, so I don't think it's a problem with the files.
Is this an issue that has been noticed by anyone else? Is there anything I can do to fix it's And if not, is it the kind of thing I need to send my player back for?

@ It could be incorrect ID3 tags on your .mp3s, if the source for your music had the wrong ID3 information, your Zen won't show the correct information unless you use an? ID3 Tag Editor to correct the source.

My MacBook Pro shows the logo in a white screen when I ask for a Software Update under the apple. Actually it stays blank on Featured, Top Charts, Categories and Purchases as well. What up? Thanks.

My MacBook Pro shows the logo in a white screen when I ask for a Software Update under the apple. Actually it stays blank on Featured, Top Charts, Categories and Purchases as well. What up? Thanks.

I am having exactly the same problem right now. After some research, it looked like my HD was toast. I replaced it today, that part was easy, but now I cannot seem to use my original Install Disk to format the new HD. I get a grey restart screen, or if I get to the Language Selection screen, my cursor is frozen in left corner and I can't use it.
Very frustrating, hope someone else has some ideas!
PS My MacBook was about same age, and "expired" in exactly the same way as yours.

My macbook pro shows blank screen when I started..help me..

My macbook pro shows blank screen when I started . (It's like in same state when power off. ) fan sound and hard disk is running. So i connected it Through external monitor via mini display to VGA cable. I can see everything on external monitor. My display of Mac needs to change? How much it cost ?? I found so many forum discussion said that if nvedia card is faulty then its happen...let me know suggestions...I given it to apple care service station n they r telling yr display needs to change its cost me a lot.. I can't afford. And can't spend that much for 3 yr old version as new versions of macbook pro is cost vice reasonable.. can I have any suggestion?

If running 10.7 or later hold down Command-R at Startup.
This should invoke recovery Mode.
Choose Disk Utility.
Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
If errors, run again until it comes clean or gets stuck.
Report any error messages.

Some photos in iPhotos on MacBook Pro show "!" Do I have too many photos?

Some photos in iPhotos on MacBook Pro show "!" There are 7000 photos.
Do I have too many photos and have to delete some?

rabrab@ozemail wrote:
There are 7000 photos.
Do I have too many photos and have to delete some?
No.
Have a current backup.
Hold the option command keys and launch iPhoto to launch the First aid.
Start with repairing permissions first and proceed from there.
If you need to be more agressive, try the tried and true:
http://www.fatcatsoftware.com/iplm/

My MacBook Pro showed Spinning weel (SPOD) and when I tried to reboot took ages to restart (20 minutes)now shows SPOD after every command and is extrmely slow

My MacBook Pro showed Spinning weel (SPOD) and when I tried to reboot took ages to restart (20 minutes)now shows SPOD after every command and is extrmely slow

See if you can download and post an Etrecheck report:
http://www.etresoft.com/etrecheck
Ciao.

Macbook pro shows incorrect storage information on SSD.

Similar Messages

Maybe you are looking for