Macbook pro slow when viewing architectural plans

I have a mid 2010 macbook pro
2.4 processor
8 GB upgraded ram.
It is incredibly slow when loading, scrolling, and viewing pdfs for architectural plans and prints.
Why is this and how do I speed this up?

Here is the Samsung 840 evo on amazon
http://www.amazon.com/Samsung-Electronics-EVO-Series-2-5-Inch-MZ-7TE1T0BW/dp/B00 E3W16OU
And here is a comparrison between the Crucial and the Samsung.
http://ssd-comparison.whoratesit.com/Compare/Samsung-840-Evo-250GB-vs-Crucial-M5 00-240GB/1594vs1551
If your having a storage problem. I would go with the 1tb. Also you will see that the Samsung has the slight upper hand.
Hope this helps!
-Steven

Similar Messages

Why is my MacBook Pro slowe when I open it off line to view photo images?

I had recently activated iCloud. I have it set not to copy my photos or data, but only settings and a few other categories. I opened it offline in Preview to quickly view photos on memory cards. I found it slow, with a drop down box periodically flashing open from the top of the screen. It appears to be attempting to copy or save my images. I presume this is to iCloud, though I have it specifically unchecked and do not want it saved to iCloud. I have Dropbox, which I quit, so it is not a factor. I never save my photo images there either. In the past, it was never problem to open and view images with Preview. Now it is extremely slow to open and load images for contact sheet view. All this is recent with the addition of Mavericks and iCloud. Also, I attempted to get out of this by quitting, but had to resort to a forced quit, as it continued to do what it was doing.
Is there a way to be sure iCloud is not copying things and slowing down my computer? Is this a glitch caused by Mavericks?
I have done scans with Sophos Antivirus and it does not appear I have any virus. I have lost all the speed of having a Mac. It is now slower than my old dual core Acer PC. I recently added a Caldigit Thunderbolt dock which has worked great to add USB 3.0 to my early 2011 MacBook Pro which had not 3.0 ability, but this
was bypassed, as my card reader is only 2.0. Any help would be appreciated. Thanks.
<Edited by Host>

I think I have found the source of my problem detailed above. Apparently, there have been problems with Preview running on OS Mavericks, dating back to October 2013, which Apple has yet to acknowledge or address. Many have had similar problems with photo images loading very slowly to the point of making Preview unuseable.
It may also explain problems I have had with flash drives and hard drives that ran on my Mac Book Pro under Lion no longer working since upgrading to Mavericks. I found other postings on these issues.
It is a shame that I have to resort to Google as the best source to identify problems with my Mac and possible solutions. In many cases, it directs me to the source on Apple Support, which is difficult to find when one attempts a search via Apple Support. This could use some improvement.
I am new to using community support sites and Apple does not seem to provide simple, clear directions on how to get started. Jumping in with both feet, not only did I get wet, but I apparently "splashed" someone, as I got a hostile response from another community member on the first issue ever posted. I never did get an answer to the problem, though. I hope some find these comments helpful.
Oh, and wake up, Apple. We all would hope you monitor and glean information from these postings and act promptly to remedy problems with OS Mavericks.
Message was edited by: MikeMacBP2011

MacBook Pro Freezes When Viewing Any Video with new iTunes

I, too, am having problems with the latest iTunes update. My MacBook Pro freezes completely. Total lock-up. This happens when trying to view any video, including video podcasts. I have to hold down the power button for several seconds to get my laptop to turn off. Any other MBP users experiencing this?

Hi there, I have the same problem as you guys, everything was fine before iTunes 7.6 or iTunes 7.6.1 I tried both, before those updates I could watch any video in iTunes without any issue, after that when I play a video, a random video my Macbook freeze totally, sometimes comes alive but 90% of the cases I have to make a hard shutdown (press and hold the power button). I can't believe this kind of bugs in a software that is so mature. Help please!

Macbook Pro Crashes When Viewing Video

My 2008 Macbook Pro 2.4Ghz crashes frequently when using video, such as YouTube or video on iPhoto. The screen instantly goes black and a hard button restart is required each time. I can't find anything in console logs which could help me identify the problem. After doing a hardware test and not finding anything I zeroed the hard drive and reinstalled 10.6.8 and only a minimum of applications - MS Office 2008, Flip4Mac WMV and iLife '11. Still the problem continues.
Do you think it's the video card (GeForce 8600M GT) or likely some other problem?

Hi there, I have the same problem as you guys, everything was fine before iTunes 7.6 or iTunes 7.6.1 I tried both, before those updates I could watch any video in iTunes without any issue, after that when I play a video, a random video my Macbook freeze totally, sometimes comes alive but 90% of the cases I have to make a hard shutdown (press and hold the power button). I can't believe this kind of bugs in a software that is so mature. Help please!

I have an Apple MacBook Pro and when surfing the web my computer will slow to a crawl and I will have a multi-colored spinning wheel visible until my latest request is handled. What is causing this and is there a way to prevent this from occuring

I have a MacBook Pro. When surfing the web it will eventually slow to a crawl. When this occurs, there will be a small multi-colored wheel spinning until my latest command is handled. What is causing this and is there a way that I can modify or prevent this from happening? Is there a setting that will prevent this?

When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

My macbook pro freezes when I use peripherals, thunderbolt, USB.... and it becomes imposible to edit HD videos, any suggestions?

my macbook pro freezes when I use peripherals, thunderbolt, USB.... and it becomes imposible to edit HD videos, any suggestions?

The next time you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

I have OS X Lion and the messages beta on my macbook pro. When in messages, if I initiate a video chat there is no audio. I know this must be something on my end because if I'm invited to a video chat it works fine. Please help

I have OS X Lion and the messages beta on my macbook pro. When in messages, if I initiate a video chat there is no audio. I know this must be something on my end because if I'm invited to a video chat it works fine. Please help

Hi,
The Buddy's Audio can get dropped completely if the speed of your Internet connections are vastly different.
For example the minimum speed for a 1-1 video chat is only 128kbps Upload (As Downloads tend to be faster).
Where I live in the United Kingdom I can only get DLS. This is further subject to the distance to the Exchange.
DLS at less than 3.5 km can be done at 20Mb at most exchanges.
At some exchanges there is roll out of some Fibre optic services.
In most larger towns and cities there is normally the option of a Cable service that offers similar figures.
In some parts of Sweden you can get 100Mbps services.
When the speed from your ISP varies a large amount then iChat will drop Frames to smooth out the Video
There comes a point when so many frames are dropped that the Audio will not make sense and will be dropped.
At about 128kbps a 5% variance will take you below the 100kbps mark (after allowing for the actual connection overheads)
At 10Mbps that 5% variance can be (in round terms) 500kbps
(A 500kbps service is itself good enough for a 4 way Video chat)
My experience is that PC users on AIM tend to only send the Pic at 10 frames a second (Fps). Any slower than this and the picture losses it's smoothness and flow.
You may see different Speeds and Frame Rates when you Call Out compared to when others Call In.
Setting the Bandwidth Limit to a lower figure such as 500kbps (fast enough for 4 way chats) may get around any variances in the speeds you see in the Connection Doctor during a live chat.
7:43 PM Friday; June 22, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.7.4),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Why is my Macbook Pro slow to wake after sleep?

Why is my Macbook Pro slow to wake after sleep?

I am having the same issue. I hook it up to the charger in the evening and close the lid. When I go to use it the next time it takes a good 30 seconds or so to wake up. The screen shows the log in screen but typing doesn't work and the cursor is frozen. Sometimes it will even give the rainbow wheel for the cursor, so it seem like it is processing whatever to get going. I also notice that my battery won't be fully charged at anywhere from 95%-99% after being charged a full evening. What can I do to change whatever is happening because it is pretty crappy to charge it all night expecting to have a full battery for the next use, plus the issue of having to sit there waiting for it to boot every time.

Does anyone know the difference between the Applecare Warranty for the Macbook Pro and the Applecare Protection Plan Auto Enroll 607-8192-B APP FOR MacBook

Does anyone know the difference between the Applecare Warranty for the Macbook Pro and the Applecare Protection Plan Auto Enroll 607-8192-B APP FOR MacBook

AFAIK, the difference is that the auto-enroll occurs automatically when you purchase the device and you will have to disburse the cost right there and then. Whereas the other comes in a box, can be purchased separately later and you must manually enroll your device into the system to activate the additional protection. This must occur before the base one year warranty is over.
So, if you don't want to pay up at the moment you buy the computer, you can wait up to say 11 months and buy the AppleCare warranty extension later. Just be sure to complete the enrollment BEFORE the base warranty is over, else Apple will not honor the extension (all in the fine print). This applies to all devices that offer an AppleCare option: notebooks, desktops, iStuff, etc.

What is wrong with OSX on the MacBook Pro and when will it be fixed?

When running Second Life or Worlds of Warcraft or just quick browing... anything graphically intensive on the MacBook Pro, the machine slows to a crawl, eventually completely freezes up. The cursor doesn't move, pressing the Caps Lock key does not change the Caps Lock light and the machine is no longer reachable from any other machine on the network. The only means available to recover is to hold the power button down until the Mac powers off and then restart it. This doesn't happen when running XP through boot camp and windows client versions of these programs. What is wrong with OSX on the MacBook Pro and when will it be fixed? Thanks.

I am not sure that this relevant to the discussion. But I am searching for anyone else who is seeing random freezes on 10.4. I usually don't see anything in the log after I have to do a hard reboot of the box. However, I have noticed some I/O messages when I have been able to console into an affected device, but have not captured to this point. Also, when I am able to console, the box will accept the login, but times out when trying to authenticate the password.
I am also seeing a server freeze on my G4s. I am able to reproduce the problem with a clean install from the 10.4 disk. The issue is reproducible with tcpdump, dumpcap as well as tshark. I have also tried compiling the tools with different versions of libpcap. I am able to reproduce this problem every time with a packet generator sending small packets.
It seems that the small packets aggravate the underlying cause. As the more small packets are sent the quicker I am able to reproduce the problem. With a mix of packet sizes, as seen in most networks, this issue is hard to reproduce. We have been using the G4 since 2003 as a packet analysis tool and it has been very stable up until we attempted to do analysis of a VOIP network with 10.4. The small RTP packets in conjunction with 10.4 seem to be the culprit.
So far I am not able to reproduce the freeze on a 10.2 or 10.3 image. This is not isolated to bad hardware, as I have been able to reproduce on 4 different Xserves in my labs with similar configurations.
I currently have a G4 set up in my lab and would be able to supply any info that may be needed to track down this issue. I have been thrust into administration on this box recently so I am not very familiar with debugging procedures on the Xserve or MacOS. However, I have the hardware and the test equipment that many in a production setting may not have at their disposal. So if anyone, with extensive knowledge of the Xserve or MacOS, is willing to work with me to track down this issue I am willing to do the leg work in the lab. I would appreciate any assistance that is available.

Mid 2010 macbook pro slow to sleep. No print queu issues.

Hey everyone! My Mid 2010 macbook pro slow is slow to go to sleep. I have read several community forums and I've checked for old print jobs (which seems to be a common issue) and have found none. I've also reset all printers and jobs. Anyways, it takes 35 to 60 seconds to go sleep (until fan/harddrive turns off/I see blinking white light). This slow sleep occurs even with a complete fresh install of Mavericks, and even after installing a new SSD. I am honestly at a loss.
I did the "pmset -g log" command and I have found two reoccurring things that I think might be the reason (though I don't really understand it fully). I commonly see "TimedOut InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:15" commonly and "PreventUserIdleSystemSleep "Address Book Source Sync" 00:00:30". I have bolded both of these below:
id:0xa00000a7a [System: DeclUser kDisp]
2/11/15, 9:16:49 AM EST                      Summary- [System: No Assertions] Using Batt
2/11/15, 9:37:59 AM EST Assertions          PID 17(powerd) Created InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:00 id:0xe00000bb5 [System: DeclUser SRPrevSleep kCPU kDisp]
2/11/15, 9:38:14 AM EST Assertions          PID 17(powerd) TimedOut InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:15 id:0xe00000bb5 [System: DeclUser SRPrevSleep kCPU kDisp]
2/11/15, 9:38:14 AM EST Assertions          PID 17(powerd) Released InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:15 id:0xe00000bb5 [System: DeclUser SRPrevSleep kCPU kDisp]
2/11/15, 9:38:14 AM EST                      Summary- [System: DeclUser kDisp] Using Batt
Sleep/Wakes since boot at 2/8/15, 8:52:21 PM EST   :18   Dark Wake Count in this sleep cycle:0
UUID: 09576726-5A6B-4848-82C1-8613E9381C59
2/8/15, 4:48:35 PM EST   Sleep               Software Sleep pid=59: Using BATT (Charge:67%)                             11558 secs
2/8/15, 4:48:39 PM EST   SlowResponse        PMConnection: Response from com.apple.apsd is slow (powercaps:0x0)                   4495 ms
2/8/15, 4:48:39 PM EST   WakeRequests        Clients requested wake events: None
2/8/15, 8:01:13 PM EST   Wake                Wake [CDNVA] due to EC LID0/HID Activity: Using BATT (Charge:63%)
2/8/15, 8:01:13 PM EST   SlowResponse        Kernel: Response from powerd is slow (powercaps:0x0)                                 4508 ms
2/8/15, 8:01:43 PM EST   Assertions          PID 426(AddressBookSour) Released PreventUserIdleSystemSleep "Address Book Source Sync" 00:00:30 id:0x100000254 [System: DeclUser kDisp]
2/8/15, 8:01:43 PM EST   Assertions          PID 171(UserEventAgent) Released BackgroundTask "com.apple.AddressBook.ScheduledSync" 00:00:30 id:0xc00000255 [System: DeclUser kDisp]
Does anybody have any ideas? Fixes? I am flummoxed. Thanks!

     Reset PRAM. http://support.apple.com/kb/PH18761
     Reset SMC.     http://support.apple.com/kb/HT3964
   Choose the method for:
   "Resetting SMC on portables with a battery you should not remove on your own".
      Start up in Safe Mode. http://support.apple.com/kb/PH14204?viewlocale=en_US
Best.

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support.

I cannot found iLife app on my macbook pro and when i want to buying it i cannot and i have this massage (These apps cannot be accepted by your Apple ID.These apps were already assigned to another Apple ID, and they will be available in that Apple ID's P)

i cannot found iLife app on my macbook pro and when i want to buying it i cannot and i have this massage (These apps cannot be accepted by your Apple ID.These apps were already assigned to another Apple ID, and they will be available in that Apple ID's purchases list. If you don't have access to that AppleID and want to receive future updates, you will needto purchase the applications ) what i want to do now ? please tell me

Either use the Apple ID you used when you originally purchased the applications or you will have to purchase them using your Apple ID. If you did not have the other Apple ID, then you have the applications illegally or they were improperly included with a computer you purchased from someone else.

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

Apple only supports Windows on certain hardware.
http://www.apple.com/support/bootcamp/
Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
http://refit.sourceforge.net/
This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education.

TS4002 I delete an icloud email from my MacBook Pro but when I open mail again the email is still there. What's up with that?

I delete an icloud email from my MacBook Pro but when I open mail again the email is still there. What's up with that?

exxronin wrote:
At least I understand, but the functionality does not match what the manual says. When functionality does not match the manual it is a BUG.
What if I do not want to use IMAP or Exchange? I do not like being forced to use technology I do not trust.
No, it is not a bug. It is working as designed. And there is noting in the manual that staes you can create folders for a POP account.
You do know that any email sent through a POP account stays on the provider's server (often for years) even if you delete it from your inboxes, right? Completely beyond your control. Refusing to use an IMAP service doesn't protect you from anything.

Macbook pro slow when viewing architectural plans

Similar Messages

Maybe you are looking for