MacBook Pro SMC Firmware Update 1.3 update freezes mouse pointer

After installing the update released today 5/28 (MacBook Pro SMC Firmware Update 1.3) my mouse pointer stalls, freezes on occasion. Very annoying. Anyone seeing the same. Fixes ... ?

After applying the SMC Firmware update a few days ago, my keyboard and trackpad were acting erratic (freezing, hanging). It was immediately after the update and I had not had any problems with it before.
I have also had random crashes, inability to use the keyboard/trackpad ever since.
Today my keyboard and trackpad are completely unusable, external mouse works fine.
I will take it to an Apple store tomorrow, hopefully my firmware can be reverted.
Sounds like a lot of other people are having problems with this update. http://discussions.apple.com/thread.jspa?messageID=9549034&tstart=0#9549034

Similar Messages

Hi, anyone else try this firmware update: MacBook Pro SMC Firmwar

hi there, i installed the firmware update (MacBook Pro SMC Firmware Update 1.3) which went well as usual, but now my machine is noticeably hotter when just sitting idling, which it does most of the day. I have SMC fan control installed but never needed it before this update. Is there any explanation for this? The update was supposed to change the way the fans operate, but I cant find any more info then that. Cheers!

yo LCEE, what are u doing in here! just kiddin. where are u getting ur readout? look under About this Mac, More Info, hardware and post what you got there. Here is what I got after the update.
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP31.0070.B07
SMC Version (system): 1.16f11
Serial Number (system): W873310XX91
Sudden Motion Sensor:
State: Enabled

How do I know if the MacBook Pro SMC Firmware Update 1.4 was installed

I just ran the Software Update and the 10.6.5 update the the SMC 1.4 update were available. Both required a reboot and I didn't think I should update both at the same time. I did the 10.6.5 update first then after it completed I did the SMC 1.4 update.
The SMC update installed just as the knowledge base page said it would. But how do I know if it was installed?
My SMC firmware is at version 1.27f3. The MacBook Pro is version 4,1.
David.

Thanks for the info.
I guess the only other question I have is, was the firmware already at 1.27f3 before the update or was it updated to the version?
David.

MacBook Pro SMC Firmware Update 1.6 DIDN'T solve my battery issue.

About two weeks ago I opened my MacBook Pro in the morning to find it was off. I left it on overnight and up until that morning it was still holding a very good charge for being 2.5 years old (could still get ~4 hours web browsing). When I plugged my charger in it only showed a green light. When everything was turned on and loaded I looked at my battery icon and it said (and still does say) 0% charged, not charging, replace now. I know my battery isn't holding as much a charge as before, I had it checked back in August and it was still holding 83%.
When the recent firmware update came out I thought it would solve the problem because the patch described exactly what my problem was. My charge cycle is at 1060 right now. After I installed the update there was no change in my battery though.
Thoughts anyone? Are there more steps I need to take in order to have my battery work properly again?
Thanks!

With 1060 cycles on your battery, you have experienced better battery life than most MBP users. In all likelihood a new battery would be the best course of action. However if you want, post an image of your MBP System Profiler>Hardware Overview>Hardware>Power like this example:
Ciao.

Rare battery issue that "MacBook Pro SMC Firmware Update 1.7" was supposed to address.

I recently downloaded this update that is supposed to "address a rare issue on some Apple notebooks where a battery that has accumulated more than 1000 charge cycles may unexpectedly shut down or stop functioning." This did nothing for my battery, which has been completely shot for the past six months. My MacBook Pro is essentially a desktop now because it constantly has to be plugged in. My battery only had between 200-300 cycles when it shutdown. Apple service would not replace the battery free of charge because I was off my warranty, even though I knew this was a factory defect. My question is now that Apple has acknowledged that some of the MacBook Pros had faulty batteries, will they replace them free of charge even if i'm off warranty? It seems ridiculous that I have to pay $200 plus to fix a problem that was their fault in the beginning by supplying faulty batteries.

Welcome to the Apple Support Communities
Apple has fixed the battery problem by a SMC update, so the 1000 cycles problem is now fixed, and your problem is different.
During the first year of warranty, if your battery fails, you will get it repaired for free. However, if it fails when the warranty has expired, you will have to pay unless you have purchased AppleCare.
If it's a common problem with a lot of MacBooks Pro, Apple will start a replacement program, where they will repair all batteries affected for free. This is the only exception, so you will have to pay because your warranty expired

MacBook Pro SMC Update 1.6 - Freeze

Hi all,
Facts:
model: MacBookPro8,1
OS: OS X 10.7.5
Story:
i got a Macbook Pro 8,1 (13,3" Early 2011) which worked flawlessly - until yesterday.
Yesterday I decided to install the MacBook Pro SMC Update 1.6 (http://support.apple.com/kb/DL1626) - a bit unusual for me, since i normally wait a few weeks until others tried such an update. I did nothing in parallel on my mac, just the update. After the installation process i rebooted my system to finish the update process, the scm update installation run, everything seemed to went fine.
But shortly after the login process, my System froze and i had to hard shutdown my macbook. The first 3 or 4 attempts to only switch on my computer i got only a flashing indicator led, as usual, but not display output, no start sound, nothing. I waited a few minutes, tried again, the system started to boot until the login window, but i had no time to input my credentials - the system froze again.
Since a got a bit computer experience, it's my day job, i first thought of a bad RAM. So i replaced it with two totally new ones (Corsair Mac Memory) and some older original Apple RAM, but nothing changed. I did the same with the harddisk, even i don't think it's related to a harddrive failure because of the symptoms, while trying to install a fresh OS - the system froze again.
After that i tried everything Apple proposed: SMC reset multiple times, NVRAM/PRAM reset multiple times, but nothing helped in my case.
So the current state is as follows:
- The system freezes everytime, sometimes earlier, sometimes later. But normally within 10 seconds. (I observed, the longer the computer stays off, the later the freeze appears). After a hard shutdown, i've to wait a few minutes to get the computer to display anything.
- I read the log files after installing the harddrive to another computer (it works fine there), but there seems nothing special (i could post it, if somebody need it). The system just stops responding.
I think, it MUST be related to the MacBook Pro SMC Update 1.6, because i had no problems at all before this firmware update, problems started after it.
Is anybody out there, who has another suggestion for me, or has the same symptoms?
G,
NoWay

I have MacBook Pro 13" (mid 2010) and similar problem (gray screen, system not start, noisy fan, etc.)
I applied last SMC firmware update 1.6
as a result I have unworking MacBook Pro.
When I have been looking table http://support.apple.com/kb/HT1237 I am realised that link http://support.apple.com/kb/DL1626 on update for MacBookPro8,1 1.68f99 (SMC 1.6) and for MacBookPro7,1 1.62f7 (SMC 1.6) is same. And then I booted from Installation Disk1 with 10.6.4 and saw that my version of SMC is 1.68f99 instead 1.62f7.
In my opinion it's the main reason of our common problem. Apple released not correct SMC update and this update made briks from our MacBook Pro!!!

MacBook Pro EFI Firmware Update 2.7 broken?

I'm trying to run the EFI update on my new 13" Macbook Pro but keep getting a message it's not for my machine.
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,1
Boot ROM Version:          MBP81.0047.B26
SMC Version (system):          1.68f98
Any ideas as to why EFI update will not run? The update is suppose to update to MBP81.0047.B27.
Thanks

What are you talking about, wjosten? First, he said in his original post that he had an EARLY 2011 MacBook Pro. Those WERE shipped with Snow Leopard. I have one. Second, I have the same machine, still running Snow Leopard, and Apple Update has notified me to Install MacBook Pro EFI Firmware Update 2.7.
So wjosten, are you saying that Apple Update is defective, it's wrong, and doesn't know what it's doing?
UPDATE a few minutes later ---
Guess you ARE right, wjosten, and it's Apple Update that stupid and dangerous.
According to Apple Support http://support.apple.com/kb/DL1499
   System Requirements are for
OS X Lion 10.7.3 or later!
I wonder how many MacBook Pro 2011 users are getting screwed by Apple this time.
Fortunately, I did not do this update before searching the web for warnings after I had a pervious glitch caused by a firmware update.
This is crazy!

Mac Pro SMC Firmware Update 1.1 keeps repeating

Recently I had my MacPro motherboard replaced by an Authorized Repair Center, and for the most part, everything has been working great since. That said, as I've been performing my regular software updates, I've noticed that the "Mac Pro SMC Firmware Update 1.1" keeps appearing as new update. I've installed this update multiple times now (or it seemed as though I did), but it keeps appearing with each new update.
Is there some way I can complete the update? Is it possible that there is some serial number conflict between my old/new motherboard that is preventing this? Do I need to return my machine to the repair center?
Thanks for any help.

Did you actually run the update from your Utilities folder (where I believe it ends up)? You'll go through a process of rebooting and hearing the long tone / seeing grey screen and progress bar. Until it's actually run properly, you'll keep seeing reminders.
Matt

MacBook Pro EFI Firmware Update 2.0 will not install.

Hi
The latest MacBook Pro EFI Firmware Update 2.0 will not install.
It runs and I restart my Mac but when I search for more updates it appears as a required update again.
Anyone know why this may be?

I had the same problem today. I called Apple support who transferred me to second level support and no resolution. I decided to try a combination of the items I have seen below.
I restarted my computer. I went to apple support download and downloaded the software EFI firmware update 2.0 by typing in search window. I made sure the power cord was pulled into the wall and the laptop had a FULL charge. I installed the update and the computer restarted.
I went to check the software update window after the update and restart completed and SUCCESSFUL.
I do not know why the Genius Bar or the second level support could not resolve my issues but, by me reading information here I hope at least this issue is resolved.
Thanks ALL.......... Happy Mac ing

MacBook Air SMC Firmware Update v2.0 update available again and again. How do I fix it?

I have installed MacBook Air SMC Firmware Update v2.0 three times and I still get an update available notification asking to install it again. This is a mid-13 MacBook Air running OSX 10.9.3. System info lists the SMC version as 2.13f7.
Does anyone know how to resolve this issue?

Hi,
- Are there any status or error messages in /var/log/install.log
- The Firmware version it should install is 2.12f137
- If there isn't anything in the log try:
Intel-based Macs: Resetting the System Management Controller (SMC)
and/or About NVRAM and PRAM
and check whether there is installation.
If no install, try OS X: What is Safe Boot, Safe Mode
then reboot normal, try the install again.
Hope this helps

MacBook Pro EFI Firmware Update 2.0

Hello,
I receive regular updates of the "MacBook Pro EFI Firmware Update 2.0" software. Each time I download, restart and let the update install. Each time it says update istalled succesfully... Yet each time I get the upgrade notice.
Worse now, iTunes says there is a software upgrade. But when I want to download it again I get the EFI upgrade announcement, but not the iTunes upgrade downloaded...
I've done a complete maintenance run, repair, rebuild, etc... but same results.
Thanks for any hint on what may be going wrong or how I can fix this.

I copied the version number from http://support.apple.com/kb/DL1331. That may be a misprint or typo on Apple's part. I'm posting a message asking about that in a special forum available only to level 4 or 5 users that sometimes gets replies from the folks that maintain those articles.
If I hear anything that confirms that, I will post back here, but for now I think it is safe to assume "B05" is correct.

Slow Booting time after installing MacBook Pro EFI Firmware Update 2.0 on 13 Inches Mac 2010 model

I'm experiencing a slow boot time after my computer installed a MacBook Pro EFI Firmware Update 2.0 itself on 13 Inches 2010 model, how to downgrade or fix it?
My computer is starting 2 times slower then it should be, why Apple done this to me?
Please help who really know somthing about Macs.

I have the same problem, especially when I open my laptop from sleep. It takes at least 2 minutes for the computer Internet connection to work.
Never had that problem prior to the last firmware update 2.7.
Is there a way to revert back to 2.6?

Mac Pro SMC Firmware Update "An Unexpected Error Occurred (0)" HELP

Mac Pro SMC Firmware Update (Version 1.1) Size (970 KB)
"The SMC Firmware Update adjusts fan behavior in Mac Pro. The updater application will be installed in the /Applications/Utilities folder and will launch automatically. Please follow the instructions in the updater application to complete the process."
-----THIS IS WHAT HAPPEND TO ME----I try this morning to install and this is what I got:
" An unexpected error occurred (0).
Your firmware can not be Updated. "
"See www.apple.com/support for more information."

Are you booting from RAID? even though it warns that you can't be booting from RAID, some people still run the update.
Any problem with your system?
While it only says that you need to quit any and all open programs, sometimes it helps to reboot (and boot into Safe Mode) just to begin the process.
When there was an SMC Firmware update before (last fall) some people also had trouble.
We aren't mind readers, and to say it failed doesn't give those of us reading this (and non of us are Apple tech support) a lot to go on.
+Please follow the instructions in the updater application to complete the process.+
+To update the SMC firmware on your Mac Pro:+
+Your computer’s power cord must be connected and plugged into a working power source.+
+1. Quit all other open applications.+
+2. Click Restart in the Mac Pro SMC Firmware Update window and wait for your computer to restart.+
+The SMC firmware update starts automatically. A status bar indicates the progress of the update. During the update your computer fans will run at full speed, but will return to normal once the update completes.+
+Important: Do not interrupt the update.+
+Your computer restarts automatically when the update is completed and opens the Mac Pro SMC Firmware Update.+
+3. Click OK. The SMC firmware is now up-to-date.+
+If these instructions appear on your screen again, the SMC firmware update was not successful. Repeat steps 2 and 3.+
Note:
+This update requires a Macintosh formatted disk or partition. If you are starting up using a RAID (Redundant Array of Independent Disks) subsystem, you must attach a Macintosh formatted storage device to apply this update.+
*+Some USB and FireWire devices may prevent firmware updates from installing correctly.+*
*If you are having trouble installing an update try disconnecting non-essential devices and use only an Apple branded keyboard, mouse and monitor.+*
http://www.apple.com/support/downloads/macprosmcfirmwareupdate11.html

MacBook Pro EFI Firmware Update 1.5.1 Multiple Times

for about 6 months or longer now I keep getting the same software update every few weeks on my Macbook pro. it's 1.5.1. i've probably installed it 5+ times now, and now I just uncheck the box and do the other updates. how do i get rid of this darn thing, since i have already done it? now it's just starting to annoy me.

Hi chuck,
Head to your "Utilities" folder and you will find that Software update has installed an application called "MacBook Pro EFI Firmware Update"
You should first restart your computer, disconnect any peripherals , and then run the application, following the instructions carefully along the way.
For safety reasons Software update doesn't actually install firmware updates like this itself . Instead it installs an installer. While I can understand the desire for safety, I reckon Apple could have been a bit better with the instructions on this one, as it is not at all apparent that this second step is required after running Software update to actually install the new firmware.
You aren't alone on this one. I've seen many, many posts here from people who haven't known that the second step was necessary and, accordingly, keep on getting new downloads of the installer from SU.
Cheers
Rod
Cheers
Rod

MacBook Pro EFI Firmware Update 1.5.1

Just seen this as available from the software update process on my MBP.
has anyone hand any problems with MacBook Pro EFI Firmware Update 1.5.1 updates?
thanks!

I believe it's been traced to the video card not properly initializing after sleep. It normally happens to me when I have USB peripherals attached (Such as my iPhone for charging).
After sleep the screen simply won't turn on. You can hear the volume adjusting, even music or something playing on the computer (As if it's running normally) but the screen just stays black. Sometimes it will flash on and then turn off.
The only solution I've found is to hard reboot the computer.

MacBook Pro SMC Firmware Update 1.3 update freezes mouse pointer

Similar Messages

Maybe you are looking for