Macbook Pro Sound becomes mute after upgrading to 10.6.3
Every thing on my new MBP was working fine, till I just upgraded the firmware from the 10.6.2 to 10.6.3
Now the sound went mute. No mater what I do, it remains mute.
I tried every thing, went to system preferences, tried to slide the volume slider, but nothing happenned.
Please advise how to bring the sound back.
Do I have to downgrade to 10.6.2 If yes, how can I do it. I am new to Macs. Will i loose my data.
This is to inform the MacBook Pro users, that I solved my problem only after I run the installation disc of Mac OSX, and downgraded my OS to 10.6
I would warn other users, that they should take a proper backup, before installing any Apple software updates.
Though, I am very disappointed that Apple is releasing such updates, without proper testing. It reminded me of Microsoft.
Similar Messages
-
MacBook Pro (mid 2007) freezes after upgrade to Mavericks
Hello,
After the upgrade to Mavericks my MacBook Pro (mid 2007) freezes after a couple of minutes of usage - after successful install and the use of some apps. Not bad enough the system is now always crashing if I try to boot. PM reset didn't help. Booting from the restore partition was possible, but I decided to go back to a working backup of 10.8.4 made a minute before I tried to upgrade. Why 10.8.4? Because 10.8.5 causes the strange problem that the Mac freezes after wake up from sleep.
Any suggestions?
Anyone else having this problem?
Kind regardsI did a clean install of mavericks on my MBP (mid 2007) and still it freezes at arbitary points. The very first time when it booted up it worked for longer and when I started to apply updates from app store, it froze. Successive boots froze much early, like within few seconds of booting.
I am going to check this by booting in safe mode. I am losing hope with mavericks on my MBP (mid 2007) and will switch back to snow leopard (10.6.8) which was working seemless.
I checked so many things, based on other posts to make sure if my MBP is really Mid 2007. IT IS.
Rgds,
Raj. -
MacBook Pro won't start after upgrade, not even in recovery mode
So here is what happened:
Yesterday, the app store icon told me that one update was not installed yet,because I need to restart the computer first (hard for me to reconstruct now, because I didn't really read it carefully, which I should have done, but Apple"just works™", so hey, why should I ). So I restarted the computer. This is where things went very wrong. Eventually during reboot, text appeared on the grey Apple logo screen, it looked like verbose boot mode, but overlaid on the "regular" grey boot screen with the logo. Before I could read, what was happening, I got a kernel panic with the "hold down the power button to restart".
Holding down the power button took me to the login/file vault unlock screen (I have my disk encrypted). Unfortunately neither keyboard nor trackpad worked. So I held down the power button again, which brought me back to the login/file vault unlock screen.
At this point I noticed that it said in the lower part of the screen that, in case I had problems to enter my login information, I should press the power button for a long time and then again for a short time to get into recovery mode (this is all from my memory, I might not recall it exactly as it happened).
This made things kind of worse, it showed me the Apple logo with the progress bar, which advanced to about a third or a quarter, then the progress stopped and I ended up on a grey screen with a grey crossed circle in the center (looks kind of like an european no parking sign).
I tried booting into recovery mode by holding down the R key. This brings me to the progress bar and the subsequent grey screen.
I tried to boot into my time machine, by holding down the option key. This gets me to the boot volume selection, I can choose my time machine volume (external FW800 drive), but it does not use this volume to boot (I can hear that the external disk is not spinning). Instead I get the above mentioned behavior (progress bar, grey screen).
I tried to boot into target disk mode by holding down the T key. This only works, when I connect an external USB keyboard. This way I could use another computer to recover my important files (which is good). I could also peek at the logs. It seems as if the failed boot attempts do not produce logs. But I have the system log from the "restart to install update" process. The last few seconds or so I get a lot of these messages:
Feb 3 14:33:51 Larss-MacBook-Pro kernel[0]: Refusing new kext com.apple.kpi.libkern, v14.1: already have loaded v14.0.
I use a Macbook Pro 13" early 2011. I don't know the processor speed, because I cannot boot it. I guess it has 8 GB Ram (pretty sure I maxed it out).
I have an SSD installed (I replaced the original HD with a 1GB Samsung SSD). There is another post here, which sounds similar, but I definitely did not use "Trim enabler" or similar third party software.
I use Yosemite, I think I was pretty much up to date, I suspect the reboot was for the 10.10.2 installation, but I am not sure (I simply didn't look when I hit that reboot to install button).
Yosemite on SSD wont boot and wont go in safe or recovery mode
Anyone any ideas? Any help is appreciated!So I just went through the install.log.
First of all, there I found out that I have a MacBook Pro (13-inch, Mid 2010):
Feb 3 14:31:12 larsmbpro.domain.com suhelperd[336]: GetModel: model = MacBookPro; major rev = 7; minor rev = 1
I think it was indeed the upgrade to Yosemite 10.10.2:
Feb 3 14:31:18 larsmbpro.domain.com softwareupdated[334]: SoftwareUpdate: Added foreground transaction [0x1] for OSXUpd10.10.2-10.10.2
but there was also a firmware update included:
Feb 3 14:31:21 larsmbpro.domain.com installd[363]: PackageKit: packages=(
"PKLeopardPackage <file:///Library/Updates/031-17157/OSXUpd10.10.2Patch.pkg>",
"PKLeopardPackage <file:///Library/Updates/031-17157/FirmwareUpdate.pkg>"
The last messages in this log are:
Feb 3 14:33:07 larsmbpro.domain.com Software Update.app[2747]: Running /sbin/reboot
Feb 3 14:33:07 larsmbpro.domain.com softwareupdated[334]: Removing client SUUpdateServiceClient pid=2747, uid=0, installAuth=YES rights=(system.install.apple-software, system.install.apple-software.standard-user, system.install.software, com.apple.SoftwareUpdate.modify-settings), transactions=1 (/System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update)
According to the system.log, the shutdown happened 14:33:08. The boot time is 14:33:24, no log entries between 14:33:08 and that time. 16 seconds seems awfully long for a reboot:
Feb 3 14:33:08 larsmbpro kernel[0]: Kernel requests now disabled.
Feb 3 14:33:24 localhost bootlog[0]: BOOT_TIME 1422970404 0
Feb 3 14:33:46 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.AccountPolicyHelper" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database. -
I upgraded to Yosemite on my MacBook Pro (non-retina). Now the system is incredibly slow.
1) wake-up form sleep takes up to a minute
2) Various icons will not open or respond until I have clicked on it three or four times and get the spinning beach ball (Finder, Calendar, iTunes)
3) Using Outlook for Mac app - similar issue as 2 when trying to send mail, add attachments or do anything
I am very frustrated by this upgrade. Any recommendations for speeding the system back to Mountain Lion levels?12/7/14 6:56:41.684 PM
WindowServer[121]
common_reenable_update: UI updates were finally reenabled by application "loginwindow" after 13.15 seconds (server forcibly re-enabled them after 1.00 seconds)
12/7/14 6:56:46.122 PM
WindowServer[121]
disable_update_timeout: UI updates were forcibly disabled by application "loginwindow" for over 1.00 seconds. Server has re-enabled them.
12/7/14 6:56:46.507 PM
digest-service[413]
digest-request: uid=0
12/7/14 6:56:46.507 PM
digest-service[413]
digest-request: init request
12/7/14 6:56:46.535 PM
digest-service[413]
digest-request: init return domain: MACBOOKPRO-BB06 server: STEVENS-MACBOOK-PRO-2 indomain was: <NULL>
12/7/14 6:56:48.000 PM
kernel[0]
en1: 802.11d country code set to 'US'.
12/7/14 6:56:48.000 PM
kernel[0]
en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
12/7/14 6:56:48.481 PM
WindowServer[121]
common_reenable_update: UI updates were finally reenabled by application "loginwindow" after 3.36 seconds (server forcibly re-enabled them after 1.00 seconds)
12/7/14 6:56:54.959 PM
com.apple.xpc.launchd[1]
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
12/7/14 6:57:05.054 PM
apsd[52]
Illegal subject name missing 'courier.push.apple.com' (2.5.4.3): ({
label = "2.5.4.6";
"localized label" = "2.5.4.6";
type = string;
value = US;
label = "2.5.4.8";
"localized label" = "2.5.4.8";
type = string;
value = California;
label = "2.5.4.7";
"localized label" = "2.5.4.7";
type = string;
value = Cupertino;
label = "2.5.4.10";
"localized label" = "2.5.4.10";
type = string;
value = "Apple Inc.";
label = "2.5.4.3";
"localized label" = "2.5.4.3";
type = string;
value = "courier.sandbox.push.apple.com";
12/7/14 6:57:08.000 PM
kernel[0]
pci pause: SDXC
12/7/14 6:57:09.722 PM
identityservicesd[231]
ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
12/7/14 6:57:09.722 PM
identityservicesd[231]
ApplePushService: Certificate not yet generated
12/7/14 6:57:10.035 PM
com.apple.xpc.launchd[1]
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
12/7/14 6:57:10.048 PM
com.apple.SecurityServer[55]
Session 100022 created
12/7/14 6:57:11.205 PM
identityservicesd[231]
<IMMacNotificationCenterManager: 0x7feef043b150>: Configuring notification center for identifier: com.apple.iChat topics: (
"com.apple.madrid"
12/7/14 6:57:11.436 PM
identityservicesd[231]
<IMMacNotificationCenterManager: 0x7feef043b150>: NC Disabled: NO
12/7/14 6:57:11.444 PM
identityservicesd[231]
<IMMacNotificationCenterManager: 0x7feef043b150>: DND Enabled: NO
12/7/14 6:57:11.444 PM
identityservicesd[231]
<IMMacNotificationCenterManager: 0x7feef043b150>: Updating enabled: YES (Topics: (
"com.apple.madrid"
12/7/14 6:57:11.995 PM
com.apple.xpc.launchd[1]
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
12/7/14 6:57:12.278 PM
com.apple.xpc.launchd[1]
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
12/7/14 6:57:12.720 PM
com.apple.xpc.launchd[1]
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
12/7/14 6:57:13.604 PM
logind[68]
-[SessionManager getClient:withRole:inAuditSession:]:241: ERROR: No session dictionary for audit session 100022
12/7/14 6:57:13.604 PM
logind[68]
_SMGetSessionAgent:73: ERROR: __SMGetClientForAuditSessionAgent failed 2
12/7/14 6:57:13.605 PM
IMRemoteURLConnectionAgent[429]
SACShieldWindowShowing:925: ERROR: NULL response
12/7/14 6:57:13.723 PM
identityservicesd[231]
[Warning] DeviceHeartbeat - Not updating heartbeat date, device query failed
12/7/14 6:57:13.723 PM
identityservicesd[231]
[Warning] *** Devices query failed
12/7/14 6:57:13.723 PM
identityservicesd[231]
[Warning] *** Devices query failed
12/7/14 6:57:13.727 PM
identityservicesd[231]
[Warning] *** Devices query failed
12/7/14 6:57:13.727 PM
identityservicesd[231]
[Warning] *** Devices query failed
12/7/14 6:57:13.727 PM
identityservicesd[231]
[Warning] *** Devices query failed
12/7/14 6:57:13.727 PM
identityservicesd[231]
[Warning] *** Devices query failed
12/7/14 6:57:13.728 PM
identityservicesd[231]
[Warning] *** Devices query failed
12/7/14 6:57:13.728 PM
identityservicesd[231]
[Warning] *** Devices query failed
12/7/14 6:57:13.729 PM
identityservicesd[231]
[Warning] *** Devices query failed
12/7/14 6:57:13.729 PM
identityservicesd[231]
[Warning] *** Devices query failed
12/7/14 6:57:17.141 PM
identityservicesd[231]
[Warning] DATA verification failed
12/7/14 6:57:17.142 PM
identityservicesd[231]
[Warning] IDSiMessageServerBag: URL bag data invalid (signature check failed)
12/7/14 6:57:19.377 PM
com.apple.iCloudHelper[270]
Status information fetched in 15194ms
12/7/14 6:57:19.633 PM
com.apple.iCloudHelper[270]
Status information fetched in 197ms
12/7/14 6:57:41.416 PM
mds[33]
(Server.Warning:445) No stores registered for metascope "kMDQueryScopeComputer"
12/7/14 6:57:44.616 PM
mds[33]
(Server.Warning:445) No stores registered for metascope "kMDQueryScopeComputer"
12/7/14 6:57:44.627 PM
mds[33]
(Server.Warning:445) No stores registered for metascope "kMDQueryScopeComputer"
12/7/14 6:57:44.799 PM
mds[33]
(Server.Warning:445) No stores registered for metascope "kMDQueryScopeComputer"
12/7/14 6:57:45.901 PM
mds[33]
(Server.Warning:445) No stores registered for metascope "kMDQueryScopeComputer"
12/7/14 6:57:45.901 PM
mds[33]
(Server.Warning:445) No stores registered for metascope "kMDQueryScopeComputer"
12/7/14 6:57:46.118 PM
mds[33]
(Server.Warning:445) No stores registered for metascope "kMDQueryScopeComputer"
12/7/14 6:57:57.220 PM
icbaccountsd[438]
Connection error while checking Apple Internalness. Error: Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.CrashReporterSupportHelper was invalidated.) UserInfo=0x7fcaf9d4dc10 {NSDebugDescription=The connection to service named com.apple.CrashReporterSupportHelper was invalidated.}
12/7/14 6:58:06.932 PM
mds[33]
(Server.Warning:445) No stores registered for metascope "kMDQueryScopeComputer"
12/7/14 6:58:06.977 PM
mds[33]
(Server.Warning:445) No stores registered for metascope "kMDQueryScopeComputer"
12/7/14 6:58:07.156 PM
mds[33]
(Server.Warning:445) No stores registered for metascope "kMDQueryScopeComputer"
12/7/14 6:58:09.235 PM
com.apple.xpc.launchd[1]
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
12/7/14 6:58:09.290 PM
com.apple.xpc.launchd[1]
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
12/7/14 6:58:09.735 PM
com.apple.xpc.launchd[1]
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
12/7/14 6:58:16.887 PM
mds[33]
(Server.Warning:445) No stores registered for metascope "kMDQueryScopeComputer"
12/7/14 6:58:17.295 PM
mds[33]
(Server.Warning:445) No stores registered for metascope "kMDQueryScopeComputer"
12/7/14 6:58:17.385 PM
mds[33]
(Server.Warning:445) No stores registered for metascope "kMDQueryScopeComputer"
12/7/14 6:58:17.621 PM
sandboxd[290]
([438]) icbaccountsd(438) deny mach-lookup com.apple.CrashReporterSupportHelper
12/7/14 6:59:09.004 PM
com.apple.xpc.launchd[1]
(com.apple.bsd.dirhelper[448]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.bsd.dirhelper
12/7/14 6:59:09.577 PM
com.apple.xpc.launchd[1]
(com.apple.xpc.launchd.domain.system) Service "com.apple.emond.aslmanager" tried to hijack endpoint "com.apple.aslmanager" from owner: com.apple.aslmanager
12/7/14 6:59:50.958 PM
fontd[221]
BUG in libdispatch client: dispatch_mig_server: mach_msg() failed (ipc/send) invalid memory - 0x1000000c
12/7/14 6:59:50.958 PM
Google Chrome Helper[458]
CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
12/7/14 6:59:50.959 PM
Google Chrome Helper[458]
CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
12/7/14 6:59:57.302 PM
Google Chrome Helper[458]
CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
12/7/14 6:59:57.302 PM
Google Chrome Helper[458]
CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
12/7/14 6:59:57.839 PM
Google Chrome Helper[458]
CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
12/7/14 6:59:57.839 PM
Google Chrome Helper[458]
CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
12/7/14 7:01:42.376 PM
mds[33]
(Server.Warning:445) No stores registered for metascope "kMDQueryScopeComputer"
12/7/14 7:01:42.824 PM
mds[33]
(Server.Warning:445) No stores registered for metascope "kMDQueryScopeComputer"
12/7/14 7:01:42.880 PM
mds[33]
(Server.Warning:445) No stores registered for metascope "kMDQueryScopeComputer"
12/7/14 7:01:44.648 PM
mds[33]
(Server.Warning:445) No stores registered for metascope "kMDQueryScopeComputer"
12/7/14 7:01:44.648 PM
mds[33]
(Server.Warning:445) No stores registered for metascope "kMDQueryScopeComputer"
12/7/14 7:01:45.019 PM
mds[33]
(Server.Warning:445) No stores registered for metascope "kMDQueryScopeComputer"
12/7/14 7:01:55.068 PM
mds[33]
(Server.Warning:445) No stores registered for metascope "kMDQueryScopeComputer"
12/7/14 7:02:17.842 PM
spindump[483]
Saved diag report for powerstats version com.apple.SystemStats.Daily to /Library/Logs/DiagnosticReports/powerstats_2014-12-07-190217_Stevens-MacBook-Pr o-2.diag
12/7/14 7:02:20.527 PM
mds[33]
(Server.Warning:445) No stores registered for metascope "kMDQueryScopeComputer"
12/7/14 7:02:21.188 PM
spindump[484]
Saved diag report for powerstats version com.apple.SystemStats.TopPowerEvent to /Library/Logs/DiagnosticReports/powerstats_2014-12-07-190221_Stevens-MacBook-Pr o-2.diag
12/7/14 7:02:22.435 PM
mds[33]
(Server.Warning:445) No stores registered for metascope "kMDQueryScopeComputer"
12/7/14 7:02:22.892 PM
spindump[485]
Saved diag report for powerstats version com.apple.SystemStats.TopPowerEvent to /Library/Logs/DiagnosticReports/powerstats_2014-12-07-190222_Stevens-MacBook-Pr o-2.diag
12/7/14 7:02:23.814 PM
mds[33]
(Server.Warning:445) No stores registered for metascope "kMDQueryScopeComputer"
12/7/14 7:02:24.848 PM
spindump[486]
Saved diag report for powerstats version com.apple.SystemStats.TopPowerEvent to /Library/Logs/DiagnosticReports/powerstats_2014-12-07-190224_Stevens-MacBook-Pr o-2.diag
12/7/14 7:02:50.750 PM
WindowServer[121]
disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
12/7/14 7:02:50.959 PM
mds[33]
(DiskStore.Warning:967) MLMailFlagsFixUp repair issued for 0 items
12/7/14 7:02:51.020 PM
WindowServer[121]
common_reenable_update: UI updates were finally reenabled by application "Finder" after 1.27 seconds (server forcibly re-enabled them after 1.00 seconds)
12/7/14 7:02:56.180 PM
WindowServer[121]
disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
12/7/14 7:02:57.387 PM
WindowServer[121]
common_reenable_update: UI updates were finally reenabled by application "Finder" after 2.21 seconds (server forcibly re-enabled them after 1.00 seconds)
12/7/14 7:03:01.330 PM
mds_stores[161]
(SecureStore.Error:157) Access token 7 changed uid from -1 to 501
12/7/14 7:03:03.975 PM
com.apple.xpc.launchd[1]
(com.apple.quicklook[489]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
12/7/14 7:03:17.772 PM
Console[490]
Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
12/7/14 7:03:23.759 PM
WindowServer[121]
disable_update_timeout: UI updates were forcibly disabled by application "Console" for over 1.00 seconds. Server has re-enabled them.
12/7/14 7:03:24.438 PM
WindowServer[121]
common_reenable_update: UI updates were finally reenabled by application "Console" after 1.68 seconds (server forcibly re-enabled them after 1.00 seconds)
12/7/14 7:03:32.551 PM
mds[33]
(DiskStore.Warning:967) MLMailReadFixUp repair issued for 0 items -
Mid 2009 13" Macbook Pro scroll is choppy after upgrade from 10.6.8
Everything is stock except for a Samsung 840 EVO SSD I installed last year. All applications display the choppy scrolling. I enabled TRIM again on the SSD since 10.9.2 disabled it, however this made no difference. I've been looking everywhere for a solution but no luck so far. The OS I currently have is
OS X 10.9.2 (13C64). Any ideas?I have mid 2012 Macbook Pro, and after the OS X update to form 10.9.1 to 10.9.2, the graphics look really choppy. It concerns almost everything - dock magnification, swiping thorugh spaces, moving windows around the sceen, scrolling in Safari, opening Launch Pad or Mission Control. Restart of the machine did not help. I am really confused about that.
-
My Macbook pro is very slow after upgrading to Mavericks
I upgraded to Mavericks on October 2013, since then my Mac is very slow, I have followed several suggestions in this forum, but the problem has not been fixed. Is it possible to return to Mountain Lion, my Mac had a good performace before the upgrade to Mavericks.
The report from etrecheck is the following:
Hardware Information:
MacBook Pro (13-inch, Late 2011)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 20:59:38
Disk Information:
ST9500325ASG disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 499.25 GB (216.35 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS31N
USB Information:
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] com.oracle.java.JavaUpdateHelper.plist 3rd-Party support link
Launch Agents:
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
User Login Items:
iTunesHelper
Microsoft Database Daemon
KiesAgent
fuspredownloader
Internet Plug-ins:
FlashPlayer-10.6: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 10.1.0 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.3.8 - SDK 10.6 3rd-Party support link
Silverlight: Version: 4.1.10329.0 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
User Internet Plug-ins:
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 3rd-Party support link
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Java 3rd-Party support link
Bad Fonts:
None
Old Applications:
/Applications/Microsoft Office 2011/Office
Microsoft Graph: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Centro de carga de Microsoft: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Avisos de Microsoft Office: Version: 14.3.8 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.8 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Open XML for Excel: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Galería de imágenes de Microsoft: Version: 14.3.8 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/MERP2.0
Informe de errores de Microsoft: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Conexión de documentos de Microsoft: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Complementos/Solver.app
iPackr: Version: 1.50 - SDK 10.0 3rd-Party support link
MoxierWallet: Version: 1.1.3 - SDK 10.5 3rd-Party support link
Graphing Calculator Viewer: Version: 4.0.2 - SDK 10.0 3rd-Party support link
Mail Clips: Version: 1.0.1 - SDK 10.4 3rd-Party support link
Kies: Version: 3.0.0.13091_3 - SDK 10.5 3rd-Party support link
Timey: Version: 1.1.0 - SDK 10.0 3rd-Party support link
WheelOfLifeLite: Version: 1.3 - SDK 10.0 3rd-Party support link
EasyFind: Version: 4.9 - SDK 10.5 3rd-Party support link
FaceboxPro: Version: 2.1 - SDK 10.0 3rd-Party support link
MediaMaster Server: Version: 1.3 - SDK 10.0 3rd-Party support link
Time Machine:
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 464.96 GB Disk used: 263.47 GB
Destinations:
TOSHIBA EXT [Local] (Last used)
Total size: 3
Total number of backups: 12
Oldest backup: 2013-11-01 04:28:05 +0000
Last backup: 2014-01-28 22:54:22 +0000
Size of backup disk: Excellent
Backup size 3 > (Disk size 464.96 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
5% mds_stores
4% mds
3% WindowServer
1% EtreCheck
1% mtmd
Top Processes by Memory:
295 MB com.apple.IconServicesAgent
172 MB Safari
168 MB Microsoft Database Daemon
70 MB com.apple.WebKit.Networking
70 MB WindowServer
Virtual Memory Information:
965 MB Free RAM
1.52 GB Active RAM
549 MB Inactive RAM
1021 MB Wired RAM
531 MB Page-ins
0 B Page-outs
Thak you in advanceI upgraded to Mavericks on October 2013, since then my Mac is very slow, I have followed several suggestions in this forum, but the problem has not been fixed. Is it possible to return to Mountain Lion, my Mac had a good performace before the upgrade to Mavericks.
The report from etrecheck is the following:
Hardware Information:
MacBook Pro (13-inch, Late 2011)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 20:59:38
Disk Information:
ST9500325ASG disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 499.25 GB (216.35 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS31N
USB Information:
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] com.oracle.java.JavaUpdateHelper.plist 3rd-Party support link
Launch Agents:
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
User Login Items:
iTunesHelper
Microsoft Database Daemon
KiesAgent
fuspredownloader
Internet Plug-ins:
FlashPlayer-10.6: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 10.1.0 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.3.8 - SDK 10.6 3rd-Party support link
Silverlight: Version: 4.1.10329.0 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
User Internet Plug-ins:
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 3rd-Party support link
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Java 3rd-Party support link
Bad Fonts:
None
Old Applications:
/Applications/Microsoft Office 2011/Office
Microsoft Graph: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Centro de carga de Microsoft: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Avisos de Microsoft Office: Version: 14.3.8 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.8 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Open XML for Excel: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Galería de imágenes de Microsoft: Version: 14.3.8 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/MERP2.0
Informe de errores de Microsoft: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Conexión de documentos de Microsoft: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Complementos/Solver.app
iPackr: Version: 1.50 - SDK 10.0 3rd-Party support link
MoxierWallet: Version: 1.1.3 - SDK 10.5 3rd-Party support link
Graphing Calculator Viewer: Version: 4.0.2 - SDK 10.0 3rd-Party support link
Mail Clips: Version: 1.0.1 - SDK 10.4 3rd-Party support link
Kies: Version: 3.0.0.13091_3 - SDK 10.5 3rd-Party support link
Timey: Version: 1.1.0 - SDK 10.0 3rd-Party support link
WheelOfLifeLite: Version: 1.3 - SDK 10.0 3rd-Party support link
EasyFind: Version: 4.9 - SDK 10.5 3rd-Party support link
FaceboxPro: Version: 2.1 - SDK 10.0 3rd-Party support link
MediaMaster Server: Version: 1.3 - SDK 10.0 3rd-Party support link
Time Machine:
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 464.96 GB Disk used: 263.47 GB
Destinations:
TOSHIBA EXT [Local] (Last used)
Total size: 3
Total number of backups: 12
Oldest backup: 2013-11-01 04:28:05 +0000
Last backup: 2014-01-28 22:54:22 +0000
Size of backup disk: Excellent
Backup size 3 > (Disk size 464.96 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
5% mds_stores
4% mds
3% WindowServer
1% EtreCheck
1% mtmd
Top Processes by Memory:
295 MB com.apple.IconServicesAgent
172 MB Safari
168 MB Microsoft Database Daemon
70 MB com.apple.WebKit.Networking
70 MB WindowServer
Virtual Memory Information:
965 MB Free RAM
1.52 GB Active RAM
549 MB Inactive RAM
1021 MB Wired RAM
531 MB Page-ins
0 B Page-outs
Thak you in advance -
MacBook Pro running very slowly after upgrade, spinning wheel..
I have upgraded to Yosemite. I am now getting a colour spinning wheel all the time and none of the programs are working correctly. I have bought an external hard drive and have moved a lot of photos over. I am still having problems. Please could someone look at this and help!! x
Problem description:
macbook pro really slow. colour wheel spinning all the time.
EtreCheck version: 2.1.8 (121)
Report generated 9 February 2015 11:13:12 GMT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2009) (Technical Specifications)
MacBook Pro - model: MacBookPro5,3
1 2.66 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 486
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1440 x 900
NVIDIA GeForce 9600M GT - VRAM: 256 MB
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 0:4:50
Disk Information: ℹ️
FUJITSU MJA2320BH FFS G1 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Kate's Little Pooter (disk0s2) / : 319.21 GB (125.64 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS23N
USB Information: ℹ️
Western Digital My Book 1144 2 TB
EFI (disk1s1) <not mounted> : 210 MB
My Book Studio (disk1s2) /Volumes/My Book Studio : 2.00 TB (1.92 TB free)
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Users/[redacted]/Downloads/Transmit.app
[not loaded] com.panic.TransmitDisk.transmitdiskfs (3.0.0 - SDK 10.5) [Click for support]
Launch Agents: ℹ️
[loaded] com.epson.ews.launcher.plist [Click for support]
[failed] com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.versioncueCS3.plist [Click for support]
[unknown] com.gettotallyrad.RadLabDownloader.plist [Click for support]
[running] com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[loaded] com.google.keystone.agent.plist [Click for support]
[failed] com.nchsoftware.expressinvoice.agent.plist [Click for support]
User Login Items: ℹ️
EEventManager Application (/Applications/Epson Software/Event Manager.app/Contents/Resources/Assistants/Event Manager/EEventManager.app)
Internet Plug-ins: ℹ️
iPhotoPhotocast: Version: 7.0
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 8.0.0 [Click for support]
QuickTime Plugin: Version: 7.7.3
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Silverlight: Version: 5.0.61118.0 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
Picasa: Version: 1.0 [Click for support]
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS3 [Click for support]
Flash Player [Click for support]
Rapport [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Kate's Little Pooter: Disk size: 319.21 GB Disk used: 193.57 GB
Destinations:
My Book Studio [Local]
Total size: 2.00 TB
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 2.00 TB > (Disk size 319.21 GB X 3)
Top Processes by CPU: ℹ️
6% WindowServer
0% AppleSpell
0% fontd
0% com.apple.photostream-agent
0% discoveryd
Top Processes by Memory: ℹ️
103 MB mds_stores
94 MB Mail
76 MB com.apple.photostream-agent.ImageConversionService
69 MB ocspd
64 MB Safari
Virtual Memory Information: ℹ️
1.45 GB Free RAM
1.55 GB Active RAM
486 MB Inactive RAM
539 MB Wired RAM
1.19 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Feb 9, 2015, 11:08:17 AM /Users/[redacted]/Library/Logs/DiagnosticReports/rapportd_2015-02-09-110817_[re dacted].crash
Feb 9, 2015, 11:05:53 AM Self test - passed
Feb 8, 2015, 11:35:50 PM /Library/Logs/DiagnosticReports/com.apple.iLifeSlideshow.MEXPC32ExporterHelper_ 2015-02-08-233550_[redacted].cpu_resource.diag [Click for details]
Feb 8, 2015, 10:58:00 PM /Library/Logs/DiagnosticReports/com.apple.iLifeSlideshow.MEXPC32ExporterHelper_ 2015-02-08-225800_[redacted].cpu_resource.diag [Click for details]
Feb 8, 2015, 08:37:25 PM /Library/Logs/DiagnosticReports/com.apple.iLifeSlideshow.MEXPC32ExporterHelper_ 2015-02-08-203725_[redacted].cpu_resource.diag [Click for details]
Feb 8, 2015, 07:39:31 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Finder_2015-02-08-193931_[reda cted].crash
Feb 7, 2015, 10:09:49 PM /Library/Logs/DiagnosticReports/iPhoto_2015-02-07-220949_[redacted].cpu_resourc e.diag [Click for details]
Feb 7, 2015, 07:59:45 PM /Library/Logs/DiagnosticReports/Adobe Photoshop CS3_2015-02-07-195945_[redacted].cpu_resource.diag [Click for details]
Feb 7, 2015, 12:15:09 AM /Library/Logs/DiagnosticReports/LegacyFileVaultMessageTracer_2015-02-07-001509_ [redacted].crashWhen you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Macbook pro does not boot after upgrading ram
I have a macbook pro late 2011 which runs with mavericks operating system . I have tried to upgrade my macbook to 8Gb. Macbook does not boot when the two ram slots are filled with 4GB ram but runs well when the slots are filled with 2GB ram. When i try them individually with one slot of 2GB ram and another slot with 4GB they run perfectly which shows status ok in the RAM info. What could be the problem .
Around here, most of us recommend only Crucial and OWC for RAM because it's guaranteed to work with Macs and it's what most of us have. If I were you, I would return the RAM and look at purchasing RAM from either Crucial or OWC. If you can't get their RAM to work then you'll know that there's some trouble with your actual slots.
Good luck,
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display -
Internal microphone in MacBook Pro 15" not working after upgrade to Yosemite
Hello
This issue is similar to iMac's problem with the internal microphone not working in FaceTime. In sound preferences, I have the internal microphone set for input. In FacetTme, I have Video->Microphone->Internal Microphone selected. There is no corresponding menu item for Audio (perhaps this is the problem? ). When I make a Facetime video call, I can hear the recipient, but they cannot hear me.
When I go into the Sound setting->Input, select Internal Microphone and test it (like record something from Photo Booth), the bars (input level) remain greyed-out.
MacBook Pro (15-inch, Mid 2010)
Processor 2.8 GHz Intel Core i7
Memory 8 GB 1067 MHz DDR3
HELP!Hello
This issue is similar to iMac's problem with the internal microphone not working in FaceTime. In sound preferences, I have the internal microphone set for input. In FacetTme, I have Video->Microphone->Internal Microphone selected. There is no corresponding menu item for Audio (perhaps this is the problem? ). When I make a Facetime video call, I can hear the recipient, but they cannot hear me.
When I go into the Sound setting->Input, select Internal Microphone and test it (like record something from Photo Booth), the bars (input level) remain greyed-out.
MacBook Pro (15-inch, Mid 2010)
Processor 2.8 GHz Intel Core i7
Memory 8 GB 1067 MHz DDR3
HELP! -
Macbook Pro won't start after upgrade to 10.5.2
I just updated my Macbook Pro 1.Generation to 10.5.2 via software update. After a double boot, the apple logo and the loading wheel appeard as expected. After several minutes of loading, i had to login. After login, the leopard wallpaper appears and then nothing happens. I cannot do anything. It seems that the finder and the dock won't start up.
I have several apps installed, which may cause this issue. For example DockDoctor.
What can i do? Do i have to reinstall leopard and try again to install 10.5.2 via CombiPackage?
Thanks for helpStart by:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Then download the standalone updater and reinstall 10.5.2. If that doesn't solve your problem then you will have to do an Archive and Install.
How to Perform an Archive and Install
1. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
2. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
3. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
4. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
5. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
MacBook Pro Retina Audio issue after upgrade to Mountain Lion
Got my new MacBook Pro with Retina display just over a week ago now and was working brilliantly up until last night.
I upgraded to Mountain Lion via the App store as I already bought it for my other macs and didnt wish to wait to redeem my free copy.
Ever since the update the audio develops a stutter on any audio file no matter what format, program used or at any volume.
I am hoping this is just a software isssue and can be easily rectified. I have restarted it, tried a different user and pretty much anything else I could think of before posting this.
Any help would be greatly recieved.
Thanks
LukeUsing gfxCardStatus to force discrete graphics stops the audio stutter on my machine. I already returned one retina mbp for three dead pixels... Strange that graphics switching has something to do with the audio, especially since it was stuttering every 15 seconds or so, not when the nvidia kicked in...
-
Why won't my macbook pro repair disk permissions after upgrading to Mountain Lion?
I upgraded my 2010 Macbook pro with 2.4gHz core 2 duo processor to Mountain Lion and ever since it has been giving me issues. One of my biggest concerns is that it will no longer repair disk permissions. The progress bar goes about half way and just sits there without finishing, and this is something i'm used to doing very regularly. Other than that it has been crashing fairly often and just acting strange where on Snow Leopard it never crashed or had any issues. Any suggestions?
Quit Safari. From the Finder click on Go > Go to Folder and type ~/Library/Preferences. Delete the com.apple.Safari.plist file. Logout/Login and restart Safari. Try to save a bookmark to the Bookmarks bar.
Message was edited by: hpr3 -
Connecting my macbook pro with retina display after upgrading my OS to Mountain Lion
I have been using my macbook pro with retina display for more than a month and I can connect it to my HD Television, Fine. But since I upgraded my OS to mountain Lion, I can no longer connect it to my television. Did apple missed something with mountain lion? I know there is nothing wrong with my connection, so something is wrong with the new mountain lion OS. Can people from APPLE help me?
No one from Apple here - this is a user-to-user forum. I don't have a Retina but if you could let us know how you were connecting (HDMI>HDMI, for example) perhaps someone will be able to help you out.
Clinton -
EtreCheck version: 1.9.15 (52)
Report generated 7 October 2014 20:12:21 BST
Hardware Information: ?
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.7 GHz Intel Core i7 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.5 (13F34) - Uptime: 5 days 4:56:17
Disk Information: ?
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (380.46 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Problem System Launch Daemons: ?
[failed] com.apple.wdhelper.plist
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.mcafee.ssm.Eupdate.plist Support
[loaded] com.mcafee.ssm.ScanManager.plist Support
[running] com.mcafee.virusscan.fmpd.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.adobe.CS5ServiceManager.plist Support
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[loaded] com.mcafee.menulet.plist Support
[loaded] com.mcafee.reporter.plist Support
[running] com.trusteer.rapport.rapportd.plist Support
User Launch Agents: ?
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
User Login Items: ?
Microsoft Database Daemon
Internet Plug-ins: ?
nplastpass: Version: 3.1.21 Support
OVSHelper: Version: 1.1 Support
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
AdobePDFViewerNPAPI: Version: 10.1.10 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
DivX Web Player: Version: 3.1.0.13 - SDK 10.5 Support
Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.7
SharePointBrowserPlugin: Version: 14.4.2 - SDK 10.6 Support
AdobePDFViewer: Version: 10.1.10 Support
Safari Extensions: ?
LastPass-2
Pin It Button
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Application Enhancer Support
Flash Player Support
Growl Support
Trusteer Endpoint Protection Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
3% WindowServer
3% ARM
1% firefox
1% launchservicesd
0% sysmond
Top Processes by Memory: ?
406 MB firefox
111 MB Microsoft Outlook
102 MB DashboardClient
74 MB systemstats
66 MB Finder
Virtual Memory Information: ?
732 MB Free RAM
1.09 GB Active RAM
592 MB Inactive RAM
1013 MB Wired RAM
3.56 GB Page-ins
404 MB Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" '/S*/*/Ca*/*xpc* >&- ||echo No' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors XPC\ cache );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 50 32 52;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Animation on macbook pro retina got slow after upgrading
Hey guys,
I just got my macbook pro retina updated, but the animations are slow like when you open launchpad or mission control.. it lacks alot.. Anyone having the same issue? Looks like a graphic fault or something. Hope they will fix this soon.Hey guys,
I just got my macbook pro retina updated, but the animations are slow like when you open launchpad or mission control.. it lacks alot.. Anyone having the same issue? Looks like a graphic fault or something. Hope they will fix this soon.
Maybe you are looking for
-
Voice-over audio goes offline for no reason. Is there a way to prevent this from happening?
This is happening on both my editors. I will add a voice-over track to the storyline and if I close out that project or close out FCPX, sometimes my voiceover track is offline. NO, I DID NOT MOVE THE FILE OR ERASE ANYTHING. I appreciate any input.
-
Is It possible to use the ERPI SAP to access tables customized the module SAP FI /CO?
-
There is a document here, that describes the recommended process for reporting LabVIEW bugs. Michael Aivaliotis VI Shots LLC
-
(SCM-APO ) - LiveCache error - tp error : operable program or batch file
Dear Gurus, On one our APO systems, I cannot administer liveCache, using database connection LCA, LDA, or LEA. Using LCA as an example, with tcode LC10> liveCache Monitoring, I get this error: Name and Server : QDP - ntsapsc001 DBMRFC Function :
-
Can't buy skype credit - An internal error occurre...
i got this error message when buying skype credit. "An internal error occurred. Sorry, but we were unable to start your payment. Please try again later." any help would be appreciated.