MacBook Pro sound issues under Windows 7

Gentlemen.
I have been having a couple of problems with the sound input/output on my MBP under Windows 7
I have noticed that the volume levels that I get under Windows 7 on my MBP are much lower than what I get on OS X, making it hard to hear what is occurring in game without the use of headphones.
Also, the microphone does not seem to work under Windows 7, it is seen as being there and enabled, but does not pick up sound, again, this is not an issue in OS X.
I have managed to fix the mic once before, but since I re-imaged Windows 7 on the computer I cannot remember how I managed it.
Has anyone else come across this? and more importantly, anyone got a fix for it?

Daigohgoh wrote:
Or try VM Ware 3? I hear it runs Win 7 better than VMW2? (at least until the drivers for Win 7 comes out for Mac)
I agree. In fact, I have been using VM Ware Fusion 3 for Windows 7 too. Having tried Parallels Desktop 5, I can tell you that VM Ware Fusion 3 is much better. I have found Fusion to be so much cleaner on my system. Parallels Desktop 5 feels like it has been butchered together. This has just been my own experience.
Good luck!

Similar Messages

MacBook Pro: Sound Issue. Help needed.

Hi. Recently, my headphones (I use on my iPod Touch too), and my MacBook Pro sound have not been working lately. I have been looking for a red light, but cannot find it. I left my Mac asleep (with headphones in!), and when I opened back up, niether my sound on both haven't been working. I'm trying to configure my Mac settings, but I'm stuck.
Can someone please help me answer this? If you do not know the answer, and have the exact (or close to the exact) same problem, please do not post. I will need all the assistance I can possibly get. Thank you so much.
~AppleFan17

In troubleshooting, often a concrete or exact solution is elusive. Here's what I can offer:
Troubleshooting no audio issues with built-in speakers: http://support.apple.com/kb/TS1574
Reset SMC: http://support.apple.com/kb/HT3964
Reset PRAM: http://support.apple.com/kb/ht1379
Good luck.

Macbook Pro (retina) issues with Windows 8

on MacbookPro (retina), running Windows 8 over Boot Camp, attempt to run Boot Camp Control Panel results in error message related with lack of administrative privileges to access the startup disk settings. Also, FaceTime HD camera is not available and some trackpad gestures (two finger press and two finger swipe) occasionally fail.

I installed Windows 8 Pro on my MBP Retina yesterday with only minor problems.
- Bootcamp incorrectly formatted the partition, which was easy to fix in the install process.
- Wifi was extremelly slow to connect, so much so that I resulted to seaching google to see if something major was wrong with my installation
- Scrolling was overly sensitive to the point where using the arrows was much for satisyfing
Other than that, the USB stick of course came bundled with the support which sets itself up (at least it did for me). Keyboard functions (media controls, volume, brightness, etc) and all the extra dongles (wifi [eventually], bluetooth, etc) work. I also hope to see drivers for swiping and improved scrolling in the future...would be really helpful considering the laptop cost in excess of 2.5 grand.
I don't have any answer for when support will be coming, but I'm sure you can count on this forum post for when it will be...your question was result #1 for me on Google search.

Hello, I have a Macbook pro which runs under 10.5.8. I want to use a PC interface. been told I need to purchase paralellDestop 6, Windows & Microsoft 2008licence?

Hello, I have a Macbook pro which runs under 10.5.8. I want to use a PC interface. I've been told I need to purchase paralell Destop 6, Windows licence and Microsoft Office 2008 for PC. Is that correct ?

If you have a MacBook Pro with 10.5, that's usually a machine that's getting long in the tooth and thus running Windows as a virtual machine (one OS inside another) will likely be slow.
Also spending all that money for Windows (VirtualBox is free) and Office seems like almost a waste of effort if the machine is going to die suddenly.
MacBook Pro's last about 4-5 years.
To do what you want your going to have to upgrade OS X to 10.6, then either buy VMFusion or Parallels which they are now catering to 10.7 and 10.8 users, so it's slow on 10.6, or use the free VirtualBox which will run well on 10.6. Then buy a copy of Windows 7 as earlier Windows versions are not being sold, then Office 11 or whatever.
You can also install OfficeMac into 10.6, if they still sell a copy.
You see your outdated really, and anything that can work is soon to be ignored etc.
What I would consider doing instead, since your not a OS upgrade type of person (we are on 10.8 now which won't run on your machine or be extremely slow) is to buy yourself a decent Windows 7 laptop and install Office into that. Some have the demo already inside and all you have to do is activate it.
This way you get your Windows experience and Office experience, don't have to fiddle with complicated virtual machine software, or Apple's problematic Bootcamp etc as Apple really is leaving 10.5 and 10.6 users behind, and by next summer will be leaving 10.7 users behind too.
Windows 7 laptop will be the cheapest and least stressful option for you, you can continue to use the Mac until it drops dead of course.
I say this because your on 10.5, your like most computer users, just a computer user and not a geek.
You obviously have some reason you need Office, likely for a job or school and since 99% use Windows and Office, then that's what you should be using.
If your only needing Office or Office like program for something temporary, then I suggest you install the free LibreOffice into OS X, however I don't know if it will run in 10.5, you might have to upgrade to 10.6 via the 10.6.3 white retail disk, however Apple doesn't sell it anymore, but perhaps Amazon or elsewhere does.
Sorry, you have been out of the upgrade loop for quite some time, so a new machine is in order as that one is about to die soon, so I wouldn't be spending too much on it really.
If you have a fat wallet you can buy a new Mac with 10.8, and have Windows 7 installed in BootCamp (direct boot) and also into VMFusion or Parallels (copies the Bootcamp Windows so you can use both) and Office for you. It will come all set up, enter your password and use the machine.
I think OtherWorld Computing will sell you a pre-configured Mac all set up like that for you, Apple won't do it though.
You can also pay a local PC/Mac specialist to do the same.
Don't forget setting up a backup system for both Windows and OS X, add anti-malware software in Windows, you'll need that.
IMO a new Windows 7 laptop would be the cheaper, less stressful option, Learning Bootcamp and virtual machine software can be a pain if your not computer savvy, al;so Apple has a nasty habit of upgrading the operating system constantly, now on a annual basis. You don't upgrade and all your third party software, then your denied security updates in short order. Windows 7 laptop will last a decade on the same version, only needing simple updates, not upgrades.
If you want your Windows machine to last even longer, like a decade, then get a desktop tower instead of a laptop.
Mac's are for those who can handle a lot of change, as Apple is about always inflicting change. It's costly change too.
Good Luck
Windows in BootCamp or Virtual Machine?
Things to consider before upgrading OS X

Macbook Pro battery issues - from fully charged to 8% in under 60 mins?

Hi, I wonder if someone could point me in the right direction. Last night after fully charging my macbook pro battery in under 60 minutes it had less than 8% less. I bought this on the 1st Dec 2007 and haven't changed the battery.
I really don't know what any of the below means, but here goes:
Please help as I am no tecky.
Thank you
Catherine.
Battery Information:
Model Information:
Serial Number: Sony-ASMB012-372d-276e
Manufacturer: Sony
Device name: ASMB012
Pack Lot Code: 0003
PCB Lot Code: 0000
Firmware Version: 102a
Hardware Revision: 0500
Cell Revision: 0303
Charge Information:
Charge remaining (mAh): 2509
Fully charged: Yes
Charging: No
Full charge capacity (mAh): 2512
Health Information:
Cycle count: 154
Condition: Check Battery
Battery Installed: Yes
Amperage (mA): -447
Voltage (mV): 12389
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 5
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes

As you are aware, batteries (no matter what manufacturer) are consumable devices and is only covered for one year (barring any type of abuse). With your purchase date being in 2007, this would not be covered under your AppleCare extended service plan.
Suggest you make an appointment for your local Apple Genius Bar and they can perform a Battery & Adapter test. You can always start the process by contacting AppleCare (1.800.APL.CARE) and log down your case number after you have completed your discussions with them, so when you get to the Genius Bar, it will save you time. At that point they will be able to determine if the battery is defective and commence the replacement process. Include your case number in the notes section of your Genius Bar appointment form. This tests will check your MagSafe adapter and battery at the same time and takes about a couple of minutes if that. Hope this helps guide you through the process.
Cheers,
Pete

Macbook Pro Will Not Boot Windows Disk

I have a late 08 (or early 09) Unibody Macbook Pro 2.53Ghz. I start the Bootcamp Assistant and successfully create my Windows partition. When I restart with the Windows 7 disk, I get a blinking cursor for 1 second then it goes to a black screen and never leaves. I have tried several different Windows 7 disks with the same result. I have even tried booting from a Windows Vista, Windows XP and even a Ubuntu disk all with the same result, stuck at a black screen.
I took the hard drive out of this mac and put it into my wife's older Macbook pro, and it booted off the Windows 7 disk and completed the install to the drive with no issues. I then put the hard drive back into my Macbook Pro and get the same black screen when trying to start the Windows partition, and still have the same problem that it will not boot from any other OS disk be it Windows or Ubuntu. It boots from OS X DVDs without a problem.
Also several months ago I had a Windows XP installation on this computer with no issues. I wiped it just before going to Snow Leopard.
Any clue as to what is going on here?

What is really odd is if I take my hard drive out of my Unibody Macbook Pro and put it into my wife's non-unibody Macbook Pro, it boots the Windows partition with no problem (Remembering I previously swapped these hard drives to complete the Windows installation to my hard drive). Seeing as the disk boots on her machine fine and not in mine, and my Windows cds (DVDs) boot fine on hers and not on mine, it seems to me it's something specific about my machine, but I can't imagine what it is.

Can't install windondows 8.1 on my macbook pro - format issue

Can't install windondows 8.1 on my macbook pro - format issue
Running latest version of Mavericks.
Followed the exact bootcamp proceduce.
Have official window 8.1 version on cd.
All goes well until I have to format the 65Gb partition. Disk=0 and partition=4
Can't get over it. Altough I formatted it via a hint found on the internet with "dislpart" in NTFS. Wich also went weel and give the labelname "BOOTCAMP". But still no luck.
I have two questions:
1/ How to start my mac again in normal mavericks mode?
2/ How can I overcome the windows installation issue?
Tried already a lot of hints found on the internet.

First, make a time machine backup. You will need to erase ands reformat your hard drive. I had the same issue. The issue is that you can't install Windows using bootcamp without having the hard drive formatted as Mac OS Extended (Journaled). Do this from disk utility or recovery mode (hold down command and r at startup). Then you have to restore the backup to the hard drive. Then make a usb installer drive with bootcamp and then partition and install. Here's a tip: after you install bootcamp and are in the Windows desktop, go into the installer drive and then go into the bootcamp or support folder, then find a installer that contains the Apple bootcamp drivers. Also, you will need to convert the disk to an iso file. TO MAKE THE USB DRIVE FROM A DISC, USE THIS LINK
Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support

My Macbook Pro is still under limited warranty. Is it possible to upgrade my pro to retina display by going in to the store?

My Macbook Pro is still under limited warranty. Is it possible to upgrade my pro to retina display by going in to the store?

You can only exchange or upgrade your macbook pro for a retina macbook if you are within the 14 days purchase time frame. After the 14th day, you are no longer eligible for an exchange or any upgrade but only for free repairs.
Limited warranty doesn’t mean you would be eligible for an exchange or an upgrade, but its a time period in which your existing macbook hardware and software issues are rectified free of cost.
Hope this helps.....

MacBook Pro sounded like a drill machine, seriously. What to do?

My MacBook Pro sounded like a drill machine, seriously. Think it was the HDD. The sound was so loud that I almost fell off my chair. Next day I get this "restart" message, so I try to restart. I then spent an hour trying to turn the mac back on. The mac-made just beeps and would not start, just a black screen.
Now, everything seems normal.. but I have had problems turning on the mac several times. It will happen again. What to do?

If you have not done so already, back up your data. If your computer is under warranty, Apple will repair your computer for free. If you are near to an Apple Store, make a reservation to visit a Genius, and have your computer checked out.

Does anyone know How to run twin monitors on a MacBook Pro operating on a Windows Server 2008 R2 ?

Hi
Does anyone know How to run twin monitors on a MacBook Pro operating on a Windows Server 2008 R2 ?

I know this doesn't help you much, but, I think you have to see if your Mac pro does audio out via HDMI. I don't even know if mine does via DVI. I think it may have to do with the adapter. Try going into Audio MIDI and setting the digital out to multichannel
and using the toslink cable for now. Lemme see...apparently DVI does not carry audio at all. Hm. apparently monoprice could be helpful? If I understand what you're saying correctly: you want to take DVI and multichannel audio via the Toslink and have it all go out over HDMI, right? Whooo..... amazon...looks like it's about $100http://www.amazon.com/Audio-SPDIF-Toslink-Converter-Adapter/dp/B0015YYOQQ
just a shot in the dark
I'm probably wrong....or not
John B

Macbook Pro Wifi Issue

I incorrectly posted this in the wrong thread this morning.
I'm hopeful you might be able to help me diagnose a problem I'm having. I'll provide as much detail as possible.
I have a first generation MacBook Pro. As of this morning I was running 10.5.6 and up until this week was using a linksys router and a comcast cable modem.
I used to have a great wifi signal throughout the house (always full strength), and around 12-18 months ago noticed the signal would weaken. The best I would get would be minus the top bar on the signal, and usually only if I was directly above or next to the room with the router. There were no new phones or devices added that might adjust the signal. On the other side of the house, I would have no signal at all.
My wife has a nine year old ibook and has no issues connecting through wifi.
When I bring my laptop to her parents' house or to the Apple store, where they use Belkin on N or Airport Extreme, I get a full signal.
I've recently suffered a hard drive failure and had a replacement drive installed. The problem persists despite the software update.
Not knowing if it was a router issue or an airport card issue or a combination thereof, I went to the Genius Bar. The genius recommended I upgrade my router to Airport Extreme, and if that doesn't work to return it and he'd focus on the airport card or antenna. I could get the flat rate repair (no AppleCare at this point) for $320+ to repair the problem if Extreme didn't work.
I installed the Airport Extreme router and got a full signal in the basement, far side of the house, upstairs - everywhere. Until around 10pm. The signal died from the basement. If I walked into the room with the Airport Extreme router, I'd get a full signal. If I left the room, I'd get a partial signal. If I walked any distance (10-12 feet), the signal would die. I restarted both the modem and router with no change. I reinstalled the linksys router and got a depreciated connection. I restarted the Airport Extreme again and got a full signal throughout the night, morning, through restarts, and when I returned home from work.
Last evening after using youtube extensively it died again. Linksys would barely work if I switched back, and no matter how many times I restarted I couldn't get the signal to last outside of the area of the router. I left it in the basement overnight shut down, restarted this morning, and had a full signal.
I'm looking for any potential guesses as to what may be causing the problem. I don't want to replace the card if it's the antenna or sink too much cash into a machine if it's a heat related issue linked to Generation 1 syndrome.
During all of this the ten year old ibook works fine. I know a lot of macbook pros have issues with their wireless and don't want to sink in the cash if it's more complex than that. Any advice is much appreciated!

Hi nashie1002,
If you are having issues connecting to your WPA2 WiFi network after a recent update, you may find the troubleshooting steps and settings in the following articles helpful:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Apple Support: About Wireless Diagnostics
http://support.apple.com/kb/HT5606
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
It may also be worth doing a search for the specific model number of your router to see if anyone has noted any issues with Mavericks.
Regards,
- Brenden

Everytime I open Safari on my MacBook Pro a pop-up window from my Finder menu, with the Applications highlighted on the left in the favorites column with the Resources folder highlighted comes up and locks my Safari page until I manually close the Resourc

Everytime I open Safari on my MacBook Pro a pop-up window from my Finder menu, with the Applications highlighted on the left in the favorites column with the Resources folder highlighted comes up and locks my Safari page until I manually close the Resources window then I have to refresh the internet search address line at the top of Safari. Can someone tell me how to stop this. It started after a software upgrade. It didn’t do that before. Thank you.

A few thoughts for diagnosis/testing purposes:
Have you recently run the disk utility and repaired HD and permissions? If not do so.
Boot into the Safe mode - hold down shift key on boot - and see if the problems are still there. Some functions won't work but see if anything odd happens.
Check your startup items. Get rid of them temporarily.
Create a new user account and see if the problems occur with the new account.
Lastly, be sure your backup is up-to-date.

How do I convert my Windows 7 Folder to an ISO image to burn to a USB, in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

How do I convert my Windows 7 Folder to an ISO image to burn to my USB Flash drive (16GB) in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

Sorry - confusing - My question has NOT been solved yet - can anyone help?

I RECENTLY HAD THE HARD DRIVE REPLACED ON MY MACBOOK PRO 8.1 UNDER WARRENTY NOW I FIND I CANNOT INSTALL I LIFE FROM MY ORIGINAL DVDS

I RECENTLY HAD THE HARD DRIVE REPLACED ON MY MACBOOK PRO 8.1 UNDER WARRENTY NOW I FIND I CANNOT INSTALL I LIFE FROM MY ORIGINAL DVD my original os was 10.6.7 now running 10.6.8

Download & install this:
http://support.apple.com/kb/DL1512

On my MacBook Pro, while using the windows side, I have no audio. Any suggestions

On my MacBook Pro while using the Windows hard drive, I have no audio. The icon shows that I should (no mute insignia). Any thoughts what I might do to correct?
Thnaks.
Tom

Whoa, I found the answer by clicking on one of the questions in the "More Like This" box to the right. I do wonder how to find that box before posting my dumb question. The answer turned out to be checking the youtube volume control. I turned that up and it solved the problem for Comast as well.

MacBook Pro sound issues under Windows 7

Similar Messages

Maybe you are looking for