MacBook Pro spontaneously wakes from sleep after upgrading to Leopard?

For some reason, after I upgraded to Leopard, then whenever I put my MacBook Pro to sleep, it spontaneously wakes up after some time (can be from a few minutes to an hour or two.) I don't know why this is happening, but I know for sure that it's related to Leopard since I put my laptop to sleep every night (it's in my bedroom) and after upgrading to Leopard, it started to just wake up a short while after putting it to sleep.
At first I thought it could be Time Machine, so I disconnected all my external drives, but that didn't seem to work.
Does anyone know why this is happening?
Thanks in advance!

I have the same issue. Installed Leopard last night on my first-gen 1.83 MacBook. The next morning the Mac was a little slow in wanting to wake up. After that it stalled on transferring a large file from my G5 and I had to issue a reboot command via the shell to get it out of that. A few minutes later the computer locked up when trying to apple > tab through the application.
I put it to sleep after restarting the Mac from that freeze. A while later while walking out of the house I happened to glance at the Macbook and saw the apple glowing while the lid was shut and then it went back to sleep.
Tonight I put the Macbook to sleep on the way out to dinner. I noted that I had 84% of my battery left. A few hours later when I got home the MB was warm, the apple was glowing and I had 9% of my battery left.
Looks like there is some work to be done asap for 10.5.1

Similar Messages

  • Macbook Pro wont wake from sleep

    My '08 MacBk Pro wont wake from sleep. This has happened several times since I installed Lion. In the past I have simply clicked several times on the trackpad until it woke, but on several occasions it actually shut down after entering sleep mode, (It went to black screen, the little pulsing sleep light was dark and I got no responce to clicks on trackpad or keyboard). When this happens I can usually re-start the Mac with a hard re-boot to resolve the issue. This time however, I can't get the computer to turn on. I've tried pressing the power button once, and all that happens is that the sleep light blinks once along with a the normal whiring sound you hear when the computer is ramping up, but this lasts only a second and then it goes back to black screen/dead Mac. I also tried holding down the power button as I would for a hard reset at which point I get several blinks from the pulsing sleep light and then nothing. I also tried unplugging the cable, removing the battery and pressing the power button for 5 seconds, then reconnecting battery and cable and pressing the power button, (I got these steps from an article posted here on the furums). BTW, I have disconnected all external drives, etc. before trying any of these steps. Please let me know if there's something else I might try to revive my Mac.

    Follow up: I took the MacBook Pro for repair and the tech found that the logic board was damaged - probably due to so many hard resets I had to perform to get the machine to load when starting it up after shutdown or restart. I replaced the logic board, (Very expensive) and its been running fine for 3 days. However, the freezing problem has just started again and I'm worried that having to perform a hard reset to get the macbook to load will cause more damage.
    The problem that's occuring is as follows: When I start the computer up after shutdown, or sometimes after restart, the desktop fails to load and the spinning color wheel appears. I can see the dock and the main upper toolbar but my desktop is blank and my external hard drives do not load. I can't make any selections with the cursor because of the eternally spinning color wheel, so my only option is to perform a hard reset by depressing the power button until the unit shuts down. When I start it up again the system loads correctly. I have tried ejecting my external drives before shutting down, but this doesn't make a difference. This problem started when I installed Lion OS and got continually worse until the computer finally shut down for good and I had to replace the logic board. Now it's starting to happen again.
    Has anyone else experienced this problem running Lion on a MacBook Pro early '08? If so, please help me find a solution for the freezes. 

  • New macbook pro wont wake from sleep

    Hi everyone, I got the new macbook pro 15 inch with retina display about a month ago, the problem is it will not wake from when the screen goes to sleep, not all the time but enuff for me to want to throw it out the window, when it is in sleep mode i go to touch the touch pad then the keybord lights up like its about to work then dies and i end up tuning the computer off from the off button.
    I have been on the phone with apple for many hours and its doing my head in and losing my mind and they have done a re set, a re install and also after that didnt work we wiped the computer and downloaded the software directley from apple and started fresh again " AND STILL DOES NOT WAKE FROM SLEEP " i have taken it back to jb hifi where i got it from in Liverpool westfields and they said sorry we cant help you and apple are saying you have to take the computer to apple and leave it with them for a few weeks, very hard for me as i use the computer everyday to run my business and i feel ripped off big time they should replace it straight away.
    Has anyone had this problem before ? any ideas ? thank you very much for you time.  Dave

    Apple has replaced systems for others after several tries at repairs have failed.  Find an Apple Authorized Service Provider and take it in for service, as Apple support directed.  Apple would have replaced the system outright in the first 14 days of ownership. After that, you need to give them the opportunity to repair it under warranty. 
    Since you use it for business, have you asked if the Apple Authorized Service Provider can provide a loaner? Or considered renting one for the short period it would be repaired? Or talked to the Apple Authorized Service Provider about expediting repair?

  • MacBook Pro won't wake from sleep after installing Snow Leopard

    If my MacBook Pro is running while closed with an external display and I unplug it from the display it goes to sleep - as indicated by the white light and the front pulsing. If I then open the MacBook the display remains blank and it is completely unresponsive to any keys or track pad input.
    The only thing it responds to at that point is holding the power button down until it powers down and then restarting - loosing all work in progress at that point.
    Before installing Snow Leopard the Mac would wake reliably when opened from this state.

    Mike Doolin wrote:
    I think I may have found the fix for this. My MacBook Pro was dying in its sleep every time (after installing Snow Leopard), whether it went to sleep automatically or I used a Hot Corner. I went into System Preferences>Desktop & Screen Saver and changed the screen saver to Flurry, and it works now. I had had it set to a folder containing a single .pct file that I had created.
    Good advice Mike! When in doubt check the ScreenSaver settings.
    Definitely seems that it has a problem with that pic... In my case, selecting any images instead of the default setting (no screensaver) seems to have cured my non waking issue on my early Macbook Pro in Snow Leopard.
    My original problem was that no amount of trackpad input woke it, but the space bar did. The space bar seemed to wake it up with the previous Screen Saver setting. Now trackpad wakes it up (even from total sleep as well as screen saver), too. Might be nice to know about if this is an intended 'feature' as a security trick. Otherwise I consider this a bug.
    My vote is that it's a bug.

  • Macbook pro 2011 slow to sleep after upgrade from SL to Maveriks

    Hi
    i have a problem...after upgrade to Mav. (from the app store) my computer need  50+ sec to go to sleep mode. why?
    i search for the causes here: http://support.apple.com/kb/HT1776 but nothing.....
    i think that the only way is by terminal with "pmset -g log" but i don't understand.

    I have noticed this exact same issue last night/today. I upgraded last night as well.
    I have been chatting with apple support and have tried Safe boot, SMC reset, PRAM/NVRAM reset, testing on a new user account.
    Nothing seems to be fixing it, is it a known OS issue. As having a mechanical HDD with a sleep time of 30 seconds is potentially a problem.
    I upgraded from Snow Leopard which had a shutdown/sleep time of a 1-2 seconds. I'm considering going back to Snow Leopard.

  • Macbook Pro random wake from sleep

    Last September my MBP went to service for a dead fan, a corroded top case and a whine problem (which was not fixed!). Ever since the machine has been randomly waking from sleep. Sometimes just picking up the machine will make it wake up. But the big problem is that it often wakes up while in my bag during my daily transits! Obviously I am highly concerned for both the heat and the hard drive. I have just reinstalled the entire OS, reset the PRAM and SMC, but to no avail. The machine still acts the same way! What is going on? The machine is always safely in sleep (most of the time in hibernate mode) when this happens. I can clearly hear the fans and drives are off when I put it in my bag; so the problem is not that it's not going to sleep.
    Any ideas?
    P.S. I've got my Apple Care box just waiting to get registered... I seriously wished I wouldn't have had to use it so soon... Not to mention that my already recalled battery is not holding its charge, despite pmset reporting the status are Good/Good!
    MacBook Pro 15" rev 1,1   Mac OS X (10.4.9)   ROM MBP11.0055.B08, SMC 1.2f10

    Hello there DaveWoo,
    It sounds like your computer is occasionally restarting on its own when you wake it from sleep. There can be a number of reasons for this to happen, and I recommend you use the following article to help you resolve or isolate the issue. Its pretty thorough and has a lot of information.
    OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem."
    http://support.apple.com/kb/HT200553?viewlocale=en_US
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Macbook pro auto wake from sleep every minute lid open or closed

    Macbook Pro 2.53, OSX10.8.5.
    Since I installed Lion, my Macbook pro will not sleep for longer than one minure.
    Even with the lid closed it still wakes up. Charger on or off.
    Force sleep works, but auto wake after a minute.
    Have reset SMC, deleted printers, sharing off, bluetooth off, and tried for over a year to find a solution.

    Test after each of the following steps that you haven’t already tried:
    Step 1
    Take all the steps suggested in this support article. That's the starting point for any further effort to solve the problem. Skipping any of those steps may mean that the problem won't be solved.
    Step 2
    From the menu bar, select
    System Preferences ▹ Accessibility ▹ Speakable Items: Off
    Step 3
    Reset the SMC.
    Step 4
    Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Safe mode is much slower to boot and run than normal. Don’t launch any applications at first. If sleep still doesn’t work properly, back up all data and reinstall the OS. After that, if you still have the issue, make a “Genius” appointment at an Apple Store to have the machine tested.
    If sleep now works as expected, go on to the next step.
    Step 5
    Still in safe mode, launch the usual set of applications that are running when you have the problem, including your login items, one at a time, testing after each one. Some applications may not work; skip them. You might be able to identify the cause of the problem this way.
    Step 6
    If sleep is still working after you’ve launched all the usual applications, reboot as usual (not in safe mode) and test again. If sleep still works, you’re done, at least for the moment.
    If you still have the sleep issue after booting out of safe mode, post again.

  • Macbook Pro is slow to sleep after upgrading to Lion

    I just updated my Early 2008 15-inch Macbook Pro 2.4 Ghz from 2 GB to 4 GB as well as upgraded my OSX to Lion (10.7.5) from Snow Leopard (10.6.8).  I have noticed since the memory and OSx upgrade my Mac is slow to go to Sleep.  It may take up to 30-40 seconds for it to go Sleep.  Sometimes it will instantly go to Sleep, however most of the time there is a significant delay.  I have not experienced any delay or issues when waking up my Mac from sleep status, but it is very slow to go to Sleep now.  In prior versions of OSx my Mac would always instantly go to sleep.  I've researched some discussion threads and I've found some topics relating to resetting the pmset code.  I was hoping someone a lot more knowledgeable than me can help me troubleshoot this issue.  If it is the pmset, can someone give me detailed instructions on what to review and how to correct?  I see where this was posted from a previous thread but alas I'm at a loss on how to correct...https://developer.apple.com/library/mac/#documentation/Darwin/Reference/ManPages /10.7/man1/pmset.1.html.  Thanks.
    Eric

    Not enough free space on the startup disk can slow the system down.
    Click the Apple menu icon top left in your screen. From the drop down menu click About this Mac > More Info > System Report then select Storage on the left under Hardware.
    You'll see Available and Capacity. Make sure there's at least 15% free disk space.

  • Macbook Pro is slow to sleep after upgrading to Lion; pmset -g question

    Two months ago I updated from early '08 MBP from Snow Leopard to Lion and increased my memory from 2GB to 4GB.  In doing so, I noticed that my MBP will sometimes take 30 seconds to go to sleep, regardless of what applications are running.  I've put in an Apple Support ticket, and I have done everything from uninstalling and reinstalling Lion, SMS resets, and last erase harddrive and rei-install Lion and then migrate my user and apps back over.  Incidentally I noticed that when I erased hard drive and re-installed Lion prior to migrating my user and apps over my MBP performed normally (as far as instant sleep is concerned).  After I migrated my apps and user profile back over, the slow to sleep issue re-appeared.
    I've seen several articles on the forum regarding pmset -g commands and terminal.  However I'm not familiar with the pmset commands and what they actually mean.  I've also seen articles about chaning the pmset -g, but mostly those are related to MBP with retinas running Mountain Lion.  I did come acress an article that suggested I review my pmset -g assertions to see what may be preventing the slow to sleep issue.  I'm posting this below:
    Assertion status system-wide:
       PreventUserIdleDisplaySleep             0
       CPUBoundAssertion                       0
       DisableInflow                           0
       ChargeInhibit                           0
       PreventSystemSleep                      0
       PreventUserIdleSystemSleep              1
       ExternalMedia                           0
       DisableLowPowerBatteryWarnings          0
       EnableIdleSleep                         1
       NoRealPowerSources_debug                0
       UserIsActive                            0
       ApplePushServiceTask                    0
    Listed by owning process:
      pid 8391: [0x000020c7012c0040] PreventUserIdleSystemSleep named: "Address Book Source Sync"
    My question concerns the Listed by owning process.  It appears my "Address Book Source Sync" may be interfering with my system sleep.  If so, can someone confirm if my assumption is correct?  It should be noted that I have disabled my iCloud and Exchange address book and yet I still get the sporadic slow to sleep.  Can you tell me what the "Address Book Source Sync" means and what this command means, and if this may be interfering with my sleep?
    I'm waiting on a call back from an Apple Senior Technician regarding my case.  Up until now, the technician has seemed to disregard looking at my pmset settings.
    Thanks.

    Not enough free space on the startup disk can slow the system down.
    Click the Apple menu icon top left in your screen. From the drop down menu click About this Mac > More Info > System Report then select Storage on the left under Hardware.
    You'll see Available and Capacity. Make sure there's at least 15% free disk space.

  • Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.

    My Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.. I wonder what's the work around or troubleshooting to fix this. Thanks!

    try and Reset the System Management Controller (SMC)

  • MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Fixed!

    MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Airport says no IP is detected then suddenly reconnects?
    This has been a problem I’ve been troubleshooting for the last month. I’m new to the Mac family and have loved my experience up until this point. I was under the impression that mac’s are supposed to be so user friendly that even your grandmother could use one with out having any technical knowledge. I mean I shouldn’t have to be deleting drivers or reformat my mac because of an OS update glitch? (That’s what the guy at the Genius Bar told me to do.) What I refused to succumb to was that I’m really good with computers. I get at least a phone call every other week from someone asking me for tech support. So I’d like to think that nothing I’ve done to the system would have caused this anomaly.
    After numerous attempts of troubleshooting and researching forms I believe I’ve discovered a solutions that seems to be working for me.
    Here are the steps I took to create a consistent connection to my Wi-Fi. I believe it was a combination of all these steps to create success.
    1.) Changed my router to use G Wireless Only. (I’m assuming this removed any unnecessary frequencies to allow G to broadcast stronger?)
    2.) Did a scan on the other networks in my area to find out what channel everyone else was broadcasting on. Copy and past the text below into a terminal window.
    sudo ln -s /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resourc es/airport /usr/sbin/airport
    This will allow you to simply type “airport” in the terminal window to execute the command.
    Type airport –s
    This will display all the networks in your area and what channel they are broadcasting on.
    3.) Changed my router to use a channel that no one in my area was using. (This helped to make my network stronger and free of interference.)
    The last steps will help your home network improve but these next steps I believe helped fix any install errors caused maybe by the 10.6.5 update on my mac.
    4.) Boot your Mac into safe mode by holding down the shift key while booting.
    5.) Open System Preferences and Click on Network.
    6.) Click the drop down menu from Locations at the top of the screen. Click edit locations..
    7.) Create a new location by clicking the + and give it a new name.
    8.) Delete the old location by clicking on the old locations name and click the – to remove.
    9.) Reboot
    10.) Open System Preference and click on Network.
    11.) Click on the settings sprocket next to the + and – and click on Set Service Order…
    12.) Drag Airport to the top of the list of devices then click Ok.
    Now this last step is what seemed to eliminate the issue. I hardcoded my IP address to my network. This way my computer will always use the same IP and not have to search.
    13.) Click on Advanced under Network.
    14.) Click on TCP/IP. Click on the drop down for Configure IPv4 and change it to Manually.
    15.) Fill out the fields with your IPv4 Address: 192.168.1.1xx (x=whatever number) Subnet Mask: 255.255.255.0 Router: 192.168.1.1 (All of these settings are pretty standard for most home networks.)
    16.) Click on the drop down for Configure IPv6 and change it to Off.
    17.) Next click on the DNS tab at the top.
    18.) Click the + to add a DNS Record.
    To find your DNS Server open a Terminal window by launching Applications --> Utilities --> Terminal
    Then Type cat /etc/resolv.conf
    (There is a space between cat and /. Without it you’ll get no such file or directory.)
    This should return two addresses. Your ISP’s DNS Servers.
    19.) Add both records to the DNS and click Ok.
    20.) Click Ok then under Network Click Ok.
    21.) Reboot router then Mac
    22.) Fixed my connection issue
    The symptoms I experienced eluded me to believe that something with the DHCP is going into an idle then disconnecting. Before when DHCP was set to automatically assign the network signal would time out then searchers for a new IP resulting in Airport displaying No IP is detected. By setting my IP to a fixed address I still notice a slight drop in bandwidth at moments but because of the assigned IP I never loose connection. I can now stream video, play games, chat all without getting disconnected.
    I believe this fix will work for my home network but I also noticed this issue at work so for each location that I connect for the time being I’ll create each there own location and hardcode the IP address to that network. I’ve been reading that 10.6.6 is coming soon so maybe this will be resolved for good in the next update.
    Let me know if this helps or if you have any questions.
    Best of luck.
    Message was edited by: erockdabass
    Message was edited by: erockdabass

    I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
    iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
    My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
    I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
    My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
    Did you ever find anything more to this?

  • My Macbook Pro has become super slow after upgrading to 10.9.2. can anyone help please?

    My Macbook pro has slowed down drastically after upgrading to 10.9.2. It has become so slow that i can hardly use it. I did an etrcheck
    Hardware Information:
              MacBook Pro (13-inch, Mid 2012)
              MacBook Pro - model: MacBookPro9,2
              1 2.5 GHz Intel Core i5 CPU: 2 cores
              4 GB RAM
    Video Information:
              Intel HD Graphics 4000 - VRAM: 1024 MB
    System Software:
              OS X 10.9.2 (13C64) - Uptime: 0 days 0:19:10
    Disk Information:
              APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 499.25 GB (356.27 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-8A8 
    USB Information:
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Computer, Inc. IR Receiver
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
    Launch Agents:
              [System] com.hp.devicemonitor.plist 3rd-Party support link
              [System] com.hp.messagecenter.launcher.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
    User Login Items:
              iTunesHelper
              Dropbox
              AdobeResourceSynchronizer
    Internet Plug-ins:
              FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
              QuickTime Plugin: Version: 7.7.3
              AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
              AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
              Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
    Safari Extensions:
              Adblock Plus: Version: 1.7.4.1135
              Ebay Shopping Assistant: Version: 1.1
              Amazon Shopping Assistant: Version: 1.1
              Slick Savings: Version: 1.0
              Searchme: Version: 1.3
              AdBlock: Version: 2.6.18
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes:
              Flash Player  3rd-Party support link
    Old Applications:
              None
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                  29%          Safari
                  16%          com.apple.WebKit.WebContent
                   5%          PluginProcess
                   4%          WindowServer
                   3%          com.apple.WebKit.Networking
    Top Processes by Memory:
              289 MB          Safari
              131 MB          com.apple.IconServicesAgent
              82 MB          com.apple.WebKit.WebContent
              82 MB          mds_stores
              66 MB          Finder
    Virtual Memory Information:
              721 MB          Free RAM
              1.62 GB          Active RAM
              1.05 GB          Inactive RAM
              636 MB          Wired RAM
              1.18 GB          Page-ins
              0 B          Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD  com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Broadcom|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm "TCP/IP"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`find . -maxdepth 1 -exec basename {} + | while read f; do [[ ("$f" =~ ^\.. && ! "$f" =~ ^\.(adobe|android|bash.+|CFU.+|cache|config|cups|dropbox|DS_Store|filezilla|font.+|git.+|profile|rnd|sh_.+|ssh|subv.+|Trash(es)?|zprofile|zsh.+)$) || ($(stat -f%f "$f") -ge 32768 && "$f" != Library) ]] && ls -Fd "$f"; done`; Pm "Hidden user files"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor  2.4 GHz Intel Core 2 Duo, Memory  2 GB 667 MHz DDR2 SDRAM.

    I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor  2.4 GHz Intel Core 2 Duo, Memory  2 GB 667 MHz DDR2 SDRAM.

    First, back up all data immediately, as your boot drive may be failing.
    Launch the usual set of applications you use when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. What approximate values are shown for Reads in/sec and Writes out/sec?
    Step 2
    You must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
    Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

  • My macbook pro is running really slow after upgrade to Mavericks

    my macbook pro is running really slow after upgrading to Mavericks....any ideas?

    OS X Mavericks: If your Mac runs slowly
    The above link is not very useful, so if it doesn't help read on.
    There are many potential reasons that a Mac may be running slower than expected, but more information is required to begin troubleshooting, much more.
    Back up your documents and everything else important to you before proceeding. It is premature to conclude your hard disk is failing, but the symptoms you describe may presage an impending disk failure, and you should have backups anyway.
    To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting:
    Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red.
    When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
    Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
    http://www.etresoft.com/etrecheck
    Etrecheck will be in your Downloads folder. Open it from there. You may see the following dialog box:
    Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
    It will take a moment to run as it collects its data.
    Copy and paste its output in a reply.
    Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
    EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
    When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
    After completing the above please determine if the problems also occur in "Safe Mode":
    Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
    You must disable FileVault before you can start your Mac in Safe Mode.
    Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
    Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
    To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
    System performance problems for reasons that cannot be isolated to any other cause justify an SMC reset. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial.

  • Macbook won't wake from sleep

    My macbook won't wake from sleep.  I have to power down and restart.  I have also noticed that when it is asleep, the sleep indicator light doesn't pulse, it just stays on steady.  Could this be a bug in mavericks?  I have a Seagate external hard drive that I use for my Time Machine backups that it always connected.  But ejecting it before the macbook goes to sleep doesn't seem to solve the problem.
    Any advice would be appreciated.

    You can access System Logs and other information on the computer's status in Console utility; where there are endless lists of all the processes ongoing in the Mac OS X. There are specific log-out and other automatic items the system will post to such logs.
    •OS X:  When your Mac doesn't sleep or wake
    http://support.apple.com/kb/TS5357
    Such articles are helpful in so much as they also have additional links.
    Perhaps the computer is not going to sleep. The system logs can tell this.
    Regarding power management, sleep, and other activities, have you read through the article about the System Management Controller to see if any of the items listed there can help? They'd take time to go through the list. And the end item is a reset of the SMC, after reading through and troubleshooting from the list.
    •Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    A good idea is to make a backup of your content in the computer, to an external hard disk drive, so when or if you end up totally erasing the hard disk drive (to include secure erase one-pass overwrite) and reformat GUID, that an all new system could be installed on there, in part of a larger troubleshooting effort.
    Actually, if you have an externally enclosed hard disk drive with its own power supply, (not port power) and then use Carbon Copy Cloner (see Bombich software) to make a bootable clone of your entire system to a large enough external drive capable of booting in OS X, then you could get to the bottom of this issue. While keeping a boot copy of what you already have, because you can run the computer from an external clone.
    •Mac Backup - Carbon Copy Cloner:
    http://bombich.com/
    A good source for external drives that can handle clones
    is macsales; or a place to look to compare real details.
    The problem could be based in software, or in hardware. Troubleshooting against either possibility is how to resolve this problem. Some models of earlier MacBook & other intel-based Macs do not really like Mavericks; or perhaps like it less than an earlier system it may have shipped with. The earliest like Snow Leopard best.
    Anyway, there is a solution but it won't be a one-liner.
    I've done some 40 hour days, troubleshooting issues.
    Worst problem for me was buying one w/Applecare.
    Good luck & happy computing!

Maybe you are looking for