MacBook Pro start up disk full. Will not pass the grey screen

Hi
I didn't realized how close I was to fill the start up disk and now my mac pro will not boot.
I have read many entries and try a few things but nothing has worked.
I have the late 2011 MacBook Pro running Mavericks 10.9
Of the 499.25 GB I only have 176.1 MB available.
I tried reinstalling the OS X but I don't have enough space to do it.
On the disk utility I selected the volume Macintosh HD disk and clicked on Verify Disk. After 10 minutes the message read: The Volume Macintosh HD appears to be OK.
I also clicked on Repair Disk and after another 10 minutes the message read: Volume repair complete.
Updating book support partitions for the volume as required.
At this point I don't know what else to do.
Ideally I would like to be able to access my hard drive to delete the junk I don't need and safe the things I need.
I don't want to loose my files and have to format the whole thing.
Is the a way to save my files?
Thank for all the help.

Do what arthur suggested but have an external HD on hand, formatted OS X Extended (journaled) to move files from your MBP to it so as to clear out some free space.
It's recommended that a minimum of 10-15 GB of free space be maintained for optimal system and application performance. If you use iDVD make that a minimum of 20-25 GB free space.
OT

Similar Messages

HT1338 Daughter's MacBook Pro started and asked for 6 digits on a grey screen?

Daughter's MacBook Pro started and asked for 6 digits on a grey screen?

6 digits sounds like the code sent from Find My Mac when locking the machine. It can only be reset by an Apple Store.

Infoblox Captive Portal will not pass the "Accept" screen on Iphone or ipad 6.1.2

I am learning there is an issue with 6.1.2 with Captive Portal services where the latest IOS release will not progress beyond the terms and conditions. The next step in the authentricatoin process is certificate check so it would appear Apple has altered the process?
We have a lot of users complaining now but only 6.1.2 is affected. I have checked previous version on other devices and there is no issue.
Thanks
Ken

Anyone? C'mom, I know some of you techie type folks know how to fix this!

My macbook pro with OS x Lion will not drag and drop files from finder or iTunes

My macbook pro with OS x Lion will not drag and drop files from finder or iTunes. Can anyone help?

Hi, I just have same problem.. I can't drag and drop file /folder.. please help.. I can drag the file/folder and move it , but I can't drop it after move it please help...!!!
It is happen just after I re-start my computer.. I tried to repair and anything but just don't work. Actually the old style one finger double tab and lock is much better rather the 3 fingers.
Please help to fix the drag and drop for file/folder/itunes.

My Macbook Pro keyboard AND USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?

My Macbook Pro keyboard and USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?
This is quite frustrating, since it randomly occured as I was browsing the web. It seemed to happen out of nowhere. I cannot login to my user account because I cannot type my password.
Any help will be appreciated.
-Matt

If you have another Mac, boot the non-working one into Target Disk Mode (holding down "T" at startup). Hook up the two Macs via a Firewire cable. The non-working one will mount on the other Mac as an external Firewire HD.
Next, download the 10.5.6 Combo update from here:
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1056comboupdate .html
Run it. When it asks you for a destination, choose the other Mac that was mounted via Firewire. When it's done, unmount the computer and restart it. The keyboard and mouse should work now.

I bought 2 new memory card to 4 grams each - replace them in your MacBook Pro 13-inch but it will not turn on - If you are installing a card for 2 and one for 4 d all works - tell me what could be the problem

I bought 2 new memory card to 4 grams each - replace them in your MacBook Pro 13-inch but it will not turn on - If you are installing a card for 2 and one for 4 d all works - tell me what could be the problem

I assume that you have installed new RAM in your MBP.
It would be helpful if you indicated the EXACT model/year MBP that you have.
What the the RAM specifications that you are trying to install?
Ciao.

My MacBook Pro (OS 10.7.2) will not load some sellers websites that bounce through yahoo.

My MacBook Pro (OS 10.7.2) will not load some sellers websites that bounce through yahoo. Other Macs on same network work fine. I have reset Safari, tried other browsers, eliminated cookies..... to no avail. All computers running 10.7.2. I have reset Safari, tried other browsers, trashed out cookies. This has me baffled. My other macs running the same OS version work fine. Flash is up to date and have done the current software update. Any help please. I have not blocked any sites and am administator for all machines. I have tried signing in as Guest. Nothing works.

After searching other users questions with related problem, I found that VirusBarrier 6 was the issue. Reconfigured settings there and problem solved.

Macbook pro will not advance beyond grey screen at beginning of boot

macbook pro will not advance beyond grey screen at beginning of boot

Try performing an SMC reset. I am having this problem also.
To perform an smc reset:
1. Shut down your Mac, leave the MagSafe charging in.
2. Push three buttons: shift + control + option and the power button. Push and release together.
3. Wait a few seconds then turn on your Mac as normal.
Hope that works out for you!

Recently we changed our Lynksys router to an Airport Extreme and now my MacBook Pro running 10.6.8 will not stream radio through Itunes without constantly rebuffering. Any ideas?

Recently we changed our Lynksys router to an Airport Extreme and now my MacBook Pro running 10.6.8 will not stream radio through Itunes without constantly rebuffering. Any ideas?

Recently we changed our Lynksys router to an Airport Extreme and now my MacBook Pro running 10.6.8 will not stream radio through Itunes without constantly rebuffering. Any ideas?

(MacBook pro 8,1) Firmware password will not reset. Resetting PRAM fails.

(MacBook pro 8,1) Firmware password will not reset. Resetting PRAM fails. Resetting NVRAM in Open Firmware fails. Resetting PMU fails. Any suggestions?

Not trying to circumvent any feature or security of the hardware. I am the owner of the hardware, I know the current firmware password. I am simply trying to turn off my current firmware password so that I may reset the PRAM to fix a failed OS install. The instructions to turn off the current firmware password should also include having to enter in the current firmware password as done on previous models with the boot CD. This feature was made available to all models because it is a security must have and it abides by industry-standard security procedures as stated in HIPPA and other ISO standards.

My macbook pro started acting strange after a safari reset. the mouse no longer: animates the dock, activates hot corners or selects pages from the 'top sites' page.

my macbook pro started acting strange after a safari reset.
the mouse no longer: animates the dock, activates hot corners or selects pages from safari 'top sites' (without a hassle). attempts to reset dock and hot corners from preferences has been fruitless
the mouse also gets 'stuck' in logic precipitating force quits.
i run osX 10.6.8 on a 2007 macbook pro that has had 2 motherboards replaced autumn 2010.
my troubleshooting has been: restart, pRam and safe boot, also checking a 'test' account to find the same issues extant.
pRam restart caused airport to quit and say there is no airport card, and wouldn't respond untill another reboot.
macbook pro 15" 2.4 GHz intel core duo.2 GB 667 MHz DDR2 SDRAM.
i have treated this book with care, yet run logic pro studio to the limit of this book's abilities.
what shoud i do?

You don't say which year you have, however...
...there are known problems with the mid-2010 models (see http://support.apple.com/kb/TS4088?viewlocale=en_US&locale=en_US) as well as early and late 15" 2011 models (see https://discussions.apple.com/thread/4766577?tstart=0).
Apple has taken ownership of the problems with the 2010 model but, unfortunately, the free logic board replacement for that model has probably long expired for you - three years after date of purchase.
One the 2011 models Apple has admitted no defect. You'll just have to skim the articles to get an overview of the problems that people are having (usually showing up as screen glitches at first and then going downhill from there).
Good luck,
Clinton

I have a power pc g5 and it will not pass a gray screen

I have a power pc g5 and it will not pass a gray screen, i have read resolution online but the system wont detect my keyboard. have been using a microsoft one normally. tried with an official apple keyboard and still no joy. what can i do?

How to reset the SMU/PMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005) ...
http://support.apple.com/kb/HT1436
Earlier G3, G4, G5 models...
http://support.apple.com/kb/HT1939
Does it fail all these modes?
Does it boot into any of these modes?
Holding Option/alt key at bootup.
Holding SHIFT key at bootup.
Target mode...
http://support.apple.com/kb/HT1661
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
We might get clues with verbose mode...
http://support.apple.com/kb/HT1492

IMac won't start up passed the grey screen

Last friday my iMac (late 2006, 24", 2.33 duo core Intel, OS 10.6.8) gave me the spinning beach ball.
Restarting resulted in: first the apple screen with the progress indicator, followed by grey screen..
That was it. It hangs at the grey screen.
I've been busy this weekend testing all kinds of ideas to get my imac to fully start up again.
I checked the RAM, it's fine.
I flushed NVRAM, wild guess, but nothing changed.
Starting up in safe mode doesn't work.
Starting up in recovery mode doesn't work.
On the upside, I was able to start my imac up in Target mode. Using the host computer and Disk Utlity I can see there's nothing wrong with the HD. All the data is still there!, so later today I'll make a copy of the complete HD, hoping/thinking that I won't copy whatever is wrong.
I had Disk Utility repair all the permissions.
I've used the host computer to reinstall the OS on my imac.
But on start up my beloved iMac still won't get passed the grey screen.
I'm thinking something goes wrong before my Mac even gets to the HD. Maybe it's the firmware, but I'm not really sure that firmware matters in this case. And I wouldn't know how to reinstall the latest version of firmware because my imac won't start up from it's disk drive
I'm thinking maybe something could be wrong with the graphic card's RAM, though on start up I can see the apple logo just fine.
I'm not able to start up from CD, I've tried that because I wanted to reinstall my OS (before I figured out how to do that in Target Mode) by putting the OS disk in my imac's own disk drive. Staring up with the C key still gets me the grey screen. Staring up with Option key shows no other option but the HD.
So is there anybody out there who has an idea that could help me further along?
Any help is greatly appreciated!
Frank

Hi Jan,
If you have another firewire Mac you can check if the HD of your Mac is OK by connecting them with a firewire cable and use target-mode. That way I found out my HD was just fine.
It also offers you the chance to run a diagnostic program to check if anything else is fine. I used TechTool to do that. But everything checked out fine.
In the end I decided the problem is probably hardware. Some electronic part that broke. Very frustrating that some small transistor or so is keeping me from using my otherwise fine iMac.
I contacted a repairshop that also works for the local Mac retailer. They told me my iMac was concidered 'classic' and therefor it wasn't economically not worth the trouble trying to repair it.
I gave up, took two weeks to mourn the loss of my beloved iMac, and bought a Mac mini.
FrankV
Judging by your name I'm guessing I could've anwered this in Dutch.

I can not pass the lock screen

I can not pass the lock screen, when I slide to unlock

If you can't get past the lock screen when you slide to unlock, try rebooting your iPad and then try again.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Macbook Pro will not boot beyond grey screen. System freezes.

My Macbook Pro will not boot-up or get beyond the grey screen (with spinning gear wheel.) I've tried all the recommended actions: resetting PRAM, disk repair, permissions repair, re-boot in safe mode etc but still the problem persists. When viewing the safe-boot in verbose mode, the system seems to hang at the stage when it's checking the Airport & Ethernet - the last line on the page reads: "AppleBCOM5701Ethernet: 0 0 setFixedSpeed - logic error, speed any?"
Any ideas how to fix this without doing an Archive & Install?
I'm assuming that if I do an "Archive & Install" then I will lose all my Applications (VLC, Handbrake, MS Office for Mac etc.) Will this actually be the case? Will I lose them.
Any help gratefully received. Many thanks.

jfromplymouth wrote: ...I'm assuming that if I do an "Archive & Install" then I will lose all my Applications (VLC, Handbrake, MS Office for Mac etc.) Will this actually be the case? Will I lose them...
Archive and Install just affects the System files, so any apps you have should still be available afterwards. The Installer on the disk that came with your Mac, when you bought it, will tell you this before you proceed. Of course, you can always back out of the Installer if you feel chicken.
Notwithstanding it is still necessary to backup everything. You need to check that Time Machine is set to also backup your Applications folder. It might be set not to do this.
It may not be necessary to worry about this if you have the original installer disc(s). I think any stuff downloaded from iTunes etc can be re-downloaded. However, it's probably quicker to get Time Machine to backup your apps if you can afford the HDD space. It's bound to be quicker than re-downloading the stuff plus any updates. And of course there's those Apps that you have but forgotten about. What about them?

MacBook Pro start up disk full. Will not pass the grey screen

Similar Messages

Maybe you are looking for