MacBook Pro starts automatically

Last night I shut down my MacBook Pro.
This morning, it started on its own about 5:00 a.m.
How can that be?
Also, I have noted that my laptop has been very warm while shut down overnight.
Is someone using my laptop and I do not know it and, if so, how can I tell and block same?

It sounds to me like it's not shutting down at all, if it was off there'd be no heat at all ...
Run /Utilities/Console and click 'All Messages' top left
- do you actually see a completed Shutdown sequence ?
- what does it show for 5am ?

Similar Messages

  • Does the battery charging in the macbook pro retina automatically cut off when the battery is fully charged?

    Does the battery charging in the macbook pro retina automatically cut off when the battery is fully charged? or does it continue charging?In which case,is it better for the battery life to switch off the power supply or leave it on while using the macbook?

    Yes, and the pilot light on the MagSafe2 connector changes from orange to green. If you unplug, you will start draining the battery again, whereas if plugged the Mac will take power from the brick and leave the battery in a charged state.

  • My Macbook Pro started running really slow

    This week my Macbook Pro started running super slow, taking ages to open programs and giving me the color wheel alllll the time. I've never had problems like this before! I'm not running many applications or doing anything unusual but it's just running extra slow. Once or twice it has also totally gone to sleep while I was in the middle of using it, and I had to wake it back up. It has also been getting really hot and the battery life seems worse...! This is all new, I'm using my computer just as I always have but it suddenly has issues.
    The only thing it has been doing for a while is sometimes the screen will go blue - this either corrects itself within a few seconds or if I close my Macbook and then reopen it, the screen is back to normal. This is very rare though and I don't know if it's related to the slowness problem.
    What can I do to fix this??
    Mac OS X 10.6.8
    2 GHz Intel Core i7
    4 GB 133 MHz DDR3
    I just ran EtreCheck -
    Hardware Information:
        MacBook Pro (15-inch, Early 2011)
        MacBook Pro - model: MacBookPro8,2
        1 2 GHz Intel Core i7 CPU: 4 cores
        4 GB RAM
    Video Information:
        AMD Radeon HD 6490M - VRAM: 256 MB
        Intel HD Graphics 3000 - VRAM: 384 MB
    System Software:
        Mac OS X 10.6.8 (10K549) - Uptime: 1 day 3:59:13
    Disk Information:
        Hitachi HTS725050A9A362 disk0 : (465.76 GB)
            (null) (disk0s1) <not mounted>: 200 MB
            Macintosh HD (disk0s2) / [Startup]: 465.44 GB (235.1 GB free)
        MATSHITADVD-R   UJ-898 
    USB Information:
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Computer, Inc. IR Receiver
    FireWire Information:
    Thunderbolt Information:
        Apple, Inc. MacBook Pro
    Kernel Extensions:
        com.digidesign.iokit.DigiDal    (8.0.3f1)
        com.paceap.kext.pacesupport.snowleopard    (5.7.2)
    Startup Items:
        DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
        M-AudioFastTrack: Path: /Library/StartupItems/M-AudioFastTrack
        PACESupport: Path: /Library/StartupItems/PACESupport
    Problem System Launch Daemons:
        [System]    org.samba.winbindd.plist 3rd-Party support link
    Launch Daemons:
        [System]    com.adobe.fpsaud.plist 3rd-Party support link
        [System]    com.google.keystone.daemon.plist 3rd-Party support link
        [System]    com.microsoft.office.licensing.helper.plist 3rd-Party support link
        [System]    org.eyebeam.SelfControl.plist 3rd-Party support link
        [System]    PACESupport.plist 3rd-Party support link
    Launch Agents:
        [System]    com.google.keystone.agent.plist 3rd-Party support link
        [System]    com.hp.help.tocgenerator.plist 3rd-Party support link
        [System]    com.m-audio.mobilepremkii.helper.plist 3rd-Party support link
    User Launch Agents:
        [not loaded]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
        [not loaded]    com.facebook.videochat.[redacted].plist 3rd-Party support link
        [not loaded]    com.spotify.webhelper.plist 3rd-Party support link
    User Login Items:
        Flux
        iTunesHelper
        RescueTime
    Internet Plug-ins:
        o1dbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
        Unity Web Player: Version: UnityPlayer version 3.5.2f2 - SDK 10.6 3rd-Party support link
        RealPlayer Plugin: Version: Unknown
        Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
        FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
        QuickTime Plugin: Version: 7.6.6
        Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
        googletalkbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
        SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
        AdobePDFViewer: Version: 10.1.1 3rd-Party support link
        iPhotoPhotocast: Version: 7.0 - SDK 10.7
        JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Outdated! Update
    iTunes Plug-ins:
        Quartz Composer Visualizer: Version: 1.2
    3rd Party Preference Panes:
        Flash Player  3rd-Party support link
        Growl  3rd-Party support link
        M-AudioFastTrack  3rd-Party support link
        M-Audio MobilePre  3rd-Party support link
    Old Applications:
        None
    Time Machine:
        Time Machine information requires OS X 10.7 "Lion" or later.
    Top Processes by CPU:
             7%    firefox
             3%    WindowServer
             3%    EtreCheck
             2%    hidd
             0%    coreservicesd
    Top Processes by Memory:
        397 MB    firefox
        106 MB    mds
        82 MB    WindowServer
        82 MB    Mail
        49 MB    quicklookd
    Virtual Memory Information:
        1.04 GB    Free RAM
        1.04 GB    Active RAM
        1.03 GB    Inactive RAM
        907 MB    Wired RAM
        467 MB    Page-ins
        0 B    Page-outs

    The startup drive is failing, or there is some other internal hardware fault. The "etrecheck" output is irrelevant.
    Back up all data on the drive immediately if you don't already have a current backup. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

  • My macbook pro started acting strange after a safari reset. the mouse no longer: animates the dock, activates hot corners or selects pages from the 'top sites' page.

    my macbook pro started acting strange after a safari reset.
    the mouse no longer: animates the dock, activates hot corners or selects pages from safari 'top sites' (without a hassle). attempts to reset dock and hot corners from preferences has been fruitless
    the mouse also gets 'stuck' in logic precipitating force quits.
    i run osX 10.6.8 on a 2007 macbook pro that has had 2 motherboards replaced autumn 2010.
    my troubleshooting has been: restart, pRam and safe boot, also checking a 'test' account to find the same issues extant.
    pRam restart caused airport to quit and say there is no airport card, and wouldn't respond untill another reboot.
    macbook pro 15" 2.4 GHz intel core duo.2 GB 667 MHz DDR2 SDRAM.
    i have treated this book with care, yet run logic pro studio to the limit of this book's abilities.
    what shoud i do?

    You don't say which year you have, however...
    ...there are known problems with the mid-2010 models (see http://support.apple.com/kb/TS4088?viewlocale=en_US&locale=en_US) as well as early and late 15" 2011 models (see https://discussions.apple.com/thread/4766577?tstart=0).
    Apple has taken ownership of the problems with the 2010 model but, unfortunately, the free logic board replacement for that model has probably long expired for you - three years after date of purchase.
    One the 2011 models Apple has admitted no defect. You'll just have to skim the articles to get an overview of the problems that people are having (usually showing up as screen glitches at first and then going downhill from there).
    Good luck,
    Clinton

  • Macbook Pro starts up, has a small loading bar, and then shuts off.

    Macbook Pro starts up, has a small loading bar, and then shuts off after a few seconds, but the Windows bootcamp partition works fine.
    The repair disc option (using install disc) failed, and the computer cannot locate the original Mac side partition. Only Bootcamp appears under options to "restore from backup" or reinstall. The repair disc options says it should be repaired but doesn't seem to know how.
    Macbook Pro.
    Snow leaopard
    Bootcamped with Windows.
    Any ideas?

    Hold c or option key and boot off the 10.6 installer disk, run DU Repair from there.
    run through this list of fixes 1-8
    Step by Step to fix your Mac
    If it doens't work, you can recover files if you don't have any current OS X file backups, then grab what you can out of Bootcamp
    Use Data Rescue installed on the extenral boot drive ($100) to read the bits of the internal (non-filevaulted) drive to retrieve OS X data files if you can't get them off manually via drag and drop methods.
    Create a data recovery, undelete boot drive
    If you want to clone Windows, use WinClone and another drive. However it's likely compromised, unless it something you did in Windows, like trying to create a new parttition perhaps?
    Then perform a Zero Erase and install of 10.6 as shown here (on the entire drive, not only the parittions), this will give a new GUID partition table, EFI and map off bad sectors, totally fresh everything.
    How to erase and install Snow Leopard 10.6
    You cna use Carbon Copy Cloner to clone the new extenral setup to the new scrubbed internal drive. Recreate Bootcamp and WinClone back or fresh install Windows into Bootcamp like before. OR opt to use virtual machine software which is safer.
    Windows in BootCamp or Virtual Machine?
    Windows 7 can write to the boot drives GUID partition map (unlike XP), this is likely why it's borked now.

  • How do I keep my macbook pro from automatically rearranging my folders and PDF files on my desktop

    How do I keep my macbook pro from automatically rearranging my folders and PDF files on my desktop?  It seems to happen a lot after I've hooked my laptop to my Thunderbolt in my office and then I unhook my laptop to go present at a clients of taking my laptop home to work.  Every once in a while if even places all of my folders and PDF files in the far upper left corner of my screen.  Needless to say, having to constanly rearrange my desktop is extremly annoying and would love to know what the fix is for this problem.  Thank you in advance for any help offered!

    Thanks for the tip "baltwo", unfortunately my desktop settings were already set to NONE.  I've had one of my IT guys here this moring helping me look through all of this and we're at a wall trying to figure out why it's doing this.  This morning when I docked to the Thunderbolt all my folders and PDF files are in the upper lefthand corner stacked on top of each other almost out of view.  If I go to settings, displays, and swith to mirroring, all the folders and files go right back to where they're set up on my MacBook desktop, but I lose the ability to utilize the entire screen of the Thunderbolt.  Very frustrating to say the least and after searching through and reviewing several forums, Apple is very much aware of this issue and seems to be keeping silent on the issue.  Hoepfully they'll launch a fix soon!
    THANKS again for the tip, it's much appreciated!

  • So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase it...

    So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase the hard drive and do a reinstall. Since I have a recent backup this seemed like a good enough option. They were kind enough to send me a copy of the snow leopard disk to do the install since we couldn't get it to complete through the disk utility. Not sure why, since it says we are fully connected, it just never completed.
    Anyway, so now that you have the background here is the new issue. The macbook pro keeps spitting out the disk I'm trying to install from. Disk utility and using the 'Startup Disk' function from the apple menu doesn't read the disk.
    Can anyone suggest a solution to this vexing problem?
    Thanks in advance.

    Jeremy.Laurin,
    have you tried agb76’s approach here?

  • My MacBook Pro starts then shuts down on its own 4 seconds later. An idea on what I should do? Thanks!

    My MacBook Pro starts then shuts down on its own 4 seconds later. An idea on what I should do? Thanks!

    Is the little LED on your adapter's MagSafe plug glowing when it's connected? What color?
    It sounds as though your battery is drained and the adapter isn't charging it. Try resetting the SMC:
    http://support.apple.com/kb/HT3964
    That may start the battery charging again.

  • My MacBook Pro starts and shuts off after loading for sometime

    My MacBook Pro starts and shuts off after loading for sometime

    Try starting in Safe mode by holding down the Shift key while booting. Safe mode takes a while to load the OS. After that, restart the computer normally.
    If that does not work, start up in Recovery by holding down the Command and R keys. In the window that opens, choose Disk Utility at the bottom and verify and repair your disk. Repair permissions while you are there.

  • Today out of the blue my wifes Macbook pro started beeping continuisly The only way I could stop it was by shutting it down any advice?

    Today out of the blue my wifes Macbook pro started beeping continuisly The only way I could stop it was by shutting it down any advice?

    http://support.apple.com/kb/HT5860

  • My MacBook Pro switches automatically from a program to finder while working.  Can anyone make suggestions on how to stop this?

    My MacBook Pro will automatically jump from a program (Safari, Excel, etc.) to the Finder window.  Can anyone tell me how to stop this?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • HT1338 Daughter's MacBook Pro started and asked for 6 digits on a grey screen?

    Daughter's MacBook Pro started and asked for 6 digits on a grey screen?

    6 digits sounds like the code sent from Find My Mac when locking the machine. It can only be reset by an Apple Store.

  • Every time I watch a video on youtube (on any browser) my macbook pro starts freezing

    Hello everyone,
    Every time I watch a video on youtube (on any browser) my macbook pro starts freezing half a minute, works fine for 10 seconds, then freezes again... This started a couple days ago. The only solution is to restart and not watch video's... Anyone know how to solve this?
    I have a pretty old macbook pro, from around 2006. I've never had this problem...
    Thanks,
    Tommy
    P.S. My family is currently deleting some items and it seems to be working, I'll update you if the problem is fixed.

    Reinstall Flash Player?  YouTube is Flash based.

  • How can I stop power point from opening each time my Macbook Pro starts?

    How can I stop power point from opening each time my Macbook Pro starts?

    Remove it from the list in Startup Items (System Preferences).

  • For some reason, when my Macbook Pro starts up, all of the MS Office applications open.  This was not happening when I first purchased the laptop, and I never added these apps to the startup menu.  How do I remove these apps from startup?

    For some reason, when my Macbook Pro starts up now, all of the MS Office applications open.  This was not happening when I first purchased the laptop, and I never added these apps to the startup menu.  How do I remove these apps from startup?

    By default Mac apps do not close when you close the window you were working in. Unlike in Windows when you click the top right X icon in any program is closes the window and the program shuts down. On Mac OS X clicking the X in the top left hand corner only closes that windows and leave the program running in the background. If they are left open and you reboot they will restart with the system and load a window for them.

Maybe you are looking for

  • HP Officejet Pro 850 showing off line when it is turned on and plugged in.

    Ungh, it has been weeks now and this printer has just stopped working and is showing OFFLINE.  It was plugged into the back of the computer all year and worked fine and it just stopped printing so we plugged it into the USB port at the front of the c

  • Epson scanner software, won't save scan

    Thanks for the earlier responses to my question about using the Epson software within PS.  So now I am doing a scan, stand alone, but once the popup comes up to save  the scan someplace, there isn't a 'save' button to save it!  I have to close the po

  • Recording on DVD - "Unable to recover TOC" error

    Hi all Whenever I try to record on a DVD a face "Unable to recover TOC" I've tried to change the recording speed but no use. When I go to DVD properties and click on enable recording it does not recognize the DVD or any other CD in the drive. Please

  • Redaction in Acrobat X Standard

    I would like to redact documents using Acrobat X Standard. Is this available?  I have tried two versions of X Standard but neither of them have the Mark for Redaction button under Black Out & Remove Content of the Protection Tools.

  • AP Supplier Contacts Interface

    Hi to all. Hi have some doubts for supplier conversion on R12. I need to convert Supplier, Supplier Sites and Supplier Contacts. For what I saw I can join the Supplier and Supplier Sites using the same SUPPLIER_INTERFACE_ID so the interface understan