Macbook Pro Startup Disc Error Message

I keep getting the "Your Mac OS X startup disk has no more space available for applications memory" error statement, but, even after deleting around 60% of my files, it still keeps giving me that, and some of my applications won't open. I don't really know much about computers, but I've done everything I can think of + some online suggestions, but nothing has worked so far. What should I do?
In case it helps, it is a 13 inch screen, and I bought it in early 2010.

It says I have 0 KB for Audio, Movies, Photos, Apps, and Backups (which is definitely not true for any of these), and Other has 249.11 GB.
I have tried scanning for viruses, restarting my computer, and a few other vague things that didn't really seem to apply to my situation but were the best I could find. I also tried updating my computer but it said there wasn't enough space. And sometimes something about virtual memory comes up, but I assume it's just part of the same issue? And what is this "Other" stuff?

Similar Messages

ITunes purchased movies do not run on macbook pro retina display - Error message: HDCP not supported.

Hello community,
If i try to play a iTunes purchased movie on may Macbook Pro 15 Retina, a Error message comes up "HDCP not supported". I try to run it on the notebook screen, I have not plugged in any external device (monitor, beamer..).
Full Error message in german:
Der gewählte Film kann auf dem angeschlossenen Bildschirm nicht wiedergegeben werden.
Dieser Film kann nur auf Bildschirmen wiedergegeben werden, die HDCP (High-bandwidth Digital Content Protection) unterstützen.
Any ideas?

I had this same problem. What worked for me- not sure which one did it, but I went to System Preferences-Displays, and I turned off "Show mirroring options in the menu bar when available" and I also changed my resolution from "Best for retina display" to scaled "More Space". The other scaling options seemed to do similar.

Can't watch Netflix on new Macbook Pro and getting error message.

I recently got a new MacBook Pro and I am new to using Macs. I logged into Netflix and clicked on a movie but I get a message saying "An unknown error has occured". I tried setting up the device or whatever but where am I supposed to get the code? I tried the 6 numbers at the bottom of the site and nothing works. Am I supposed to download Silverlight for Netflix to work on this computer? As I've said before, I do not know anything about Macs and I am not computer savvy and I just need to know how to get Netflix going on this computer. I had searched on Google if Netflix could even be played on a Mac and it's my understanding that one is able to view Netflix on a Mac. Please help. Thanks.

Nevermind I got it working. Not sure if it's possible to delete this thread. Let me know if it is.

I cant download the latest version of software for my MacBook Pro. getting an error message

I am trying to update the software on my Mac Book Pro and i keep getting an error message.

You can run software update, write down the names of the upates and versions. Set your Safari preferences, save downloads to desktop, if in the dropdown window desktop is not available, click other and select desktop from the column on the left.
/http://www.apple.com/support/macbookpro/
Click Update your software, things are probably on overload today.
This should download the installer to your desktop. Double click it and follow the prompts.
Al the bast

My MacBook Pro has an error message saying" Profile Installation Failed"

Im trying install a wifi connection to my MacBook Pro. It downloads a file called "GTWifi.mobileconfig" and takes me to this system preferences window called Profiles. When I try to install the wifi file, it says "Profile Installation Failed. Some required information in the profile is missing." Everyone elses Mac's had no difficulty installing the wifi configuration of whatever it is. PLS HELP!!!

This happens with ALL of your iPods? So, it's probably not a problem on the iPod side of the connection.
If you have not recently (at least since this problem occurred), be sure to restart your Mac. At the same time, you can also Reset your iPod
http://support.apple.com/kb/HT1320
A Reset just restarts the iPod (it is not a Restore). Then try it again.
If that does not help, select the iPod in the iTunes sidebar, under DEVICES. Over to the right, on the Summary tab, if Enable Disk Mode is currently NOT checked, see if checking it and clicking Apply makes any difference. This is more of a test. If that setting makes a difference, it may provide a clue for the actual cause.

I am trying to update my 2nd generation iPod via iTunes on my macbook pro but an error message with the error code -1 appears. I cannot find this code anywhere ...can anyone help?

...anyone?

Try on another computer
Then see:
-1 error
-1 error too
If still problem means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Everytime I start up my MacBook Pro, I get this message. 'Insecure Startup Disabled.' "/Library/Startup items/HP Trap Monitor" has not been started because it does not have the proper security settings.

Everytime I start up my MacBook Pro, I get this message. 'Insecure Startup Disabled.' "/Library/Startup items/HP Trap Monitor" has not been started because it does not have the proper security settings.

Update your HP Printer drivers/software at their website or uninstall using the developers method.

Macbook pro startup time increased suddenly from 15 sec to 25 sec. How can we resolve this?

Hi Experts!!
My macbook pro startup time is now 25 to 35 sec and yesterday it was 15 sec. I know its not a drastic change but still i would like to bring it back to 15 sec!!
System.log file shows following:
Oct 14 22:52:03 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Oct 14 22:52:20 localhost bootlog[40]: BOOT_TIME: 1350235322 0
Oct 14 22:52:23 localhost blued[17]: Apple Bluetooth daemon started
Oct 14 22:52:25 localhost mDNSResponder[28]: mDNSResponder mDNSResponder-214.3 (Dec 17 2009 01:15:48) starting
Oct 14 22:52:25 localhost configd[13]: BUG in libdispatch: 10D2125 - 1678 - 0xa84b
Oct 14 22:52:26 localhost com.apple.usbmuxd[21]: usbmuxd-176 built for iTunesNineDot on Sep 24 2009 at 16:11:05, running 32 bit
Oct 14 22:52:26 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[29]: Login Window Application Started
Oct 14 22:52:27 localhost configd[13]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
Oct 14 22:52:27 localhost configd[13]: DHCP en1: INIT-REBOOT transmit failed
Oct 14 22:52:27 localhost configd[13]: network configuration changed.
Oct 14 22:52:34: --- last message repeated 3 times ---
Oct 14 22:52:34 localhost loginwindow[29]: Login Window Started Security Agent
Oct 14 22:52:34 localhost com.apple.WindowServer[55]: Sun Oct 14 22:52:34 localhost WindowServer[55] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Oct 14 22:52:34 localhost WindowServer[55]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Oct 14 22:52:39 localhost SecurityAgent[75]: NSSecureTextFieldCell detected a field editor ((null)) that is not a NSTextView subclass designed to work with the cell. Ignoring...
Oct 14 22:52:39 localhost loginwindow[29]: Login Window - Returned from Security Agent
Oct 14 22:52:39 localhost loginwindow[29]: USER_PROCESS: 29 console
Oct 14 22:52:39 localhost com.apple.launchd.peruser.501[79] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
Oct 14 22:52:40 localhost com.apple.launchd.peruser.501[79] (com.apple.Kerberos.renew.plist[99]): Exited with exit code: 1
Oct 14 22:52:41 localhost com.hp.messagecenter.launcher[102]: ThrottleProcessIO: throttling disk i/o
Oct 14 22:52:44 localhost ntpd[19]: time reset +0.729949 s
If we look at above log i can see few seconds wasted on kCGErrorFailure. Can anyone suggest on how to remove this error from my MBP OS X 10.6.3?
Thanks

Thanks for the update.
Upgraded to 10.6.8 combo and still KCG errors exist.
Also i can now see new error after upgrade as below:
Oct 17 14:49:22 localhost WindowServer[66]: Unable to open IOHIDSystem (0xe00002bd)
Now sure why this error is coming and if i have to worry about this?

When installing Maverick on my 17" Macbook pro I got the message that my HD is damaged and can't be repaired. I now can't restart without simply repeating the attempt to install Maverick and thereby returning to the same message. How do I abort install

When installing Maverick on my 17" Macbook pro I got the message that my HD was damaged and couldn't be repaired. (not good news!!) I now can't restart without returning to the Maverick setup and therefore returning to the same message. How do I abort the Maverick installation so that I can try to return to the previous OS so that I can try to recover/repair the HD

I have the same problem with my 2008 MacBook. Repair disk from disk utility says it was successful but the installer thinks it's groundhog day after a reboot. I also tried fsck -fy after booting in to a command mode and it came back clean but again the installer gives the same error message. It seems like a bit is stuck somewhere indicating my HD is bad when it isn't.
I had the latest version of Mountain Lion and have applied every upgrade up to then without issue.
Anyone find a solution yet without having to erase the entire disk and staring over?
Attached is a screen shot of the error.

Macbook Pro Install Disc

Hello i was wondering if the Macbook Pro Install disc Version 3A136 - 10.5.2 2008 would work on a 17" macbook pro.
Even though it doesn't actually say on the original disk that it is for a 15" MAcbook Pro.
Cheers
Adam

No, you need the grey disks that came with the 17" or a later sold copy of the Snow Leopard restail disks that have your hardware drivers on it.
Call Apple with your serial number for the grey disks, the white Snow you can stil buy online in places.
If your new 2011 machine came factory installed with Lion you can't go back to Snow unless you follow "the procedure" here and the risk is all yours.
https://discussions.apple.com/thread/3264421?start=0&tstart=0
I advise reading this too
https://discussions.apple.com/message/16276201#16276201

On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

What version of Mac OS X?
What home page?
What browser?

I tried to install ios 7 in macbook pro and the error 3 persist. phone is in the recovery mode

i tried to install ios 7 in macbook pro and the error 3 persist. phone is in the recovery mode

Try on a different computer. If you get this error again, go to an Apple store or call AppleCare. I've only seen this error once, & I was unable to solve it. Took the phone to the genius bar & they replaced the phone.

I have OS X Lion and the messages beta on my macbook pro. When in messages, if I initiate a video chat there is no audio. I know this must be something on my end because if I'm invited to a video chat it works fine. Please help

I have OS X Lion and the messages beta on my macbook pro. When in messages, if I initiate a video chat there is no audio. I know this must be something on my end because if I'm invited to a video chat it works fine. Please help

Hi,
The Buddy's Audio can get dropped completely if the speed of your Internet connections are vastly different.
For example the minimum speed for a 1-1 video chat is only 128kbps Upload (As Downloads tend to be faster).
Where I live in the United Kingdom I can only get DLS. This is further subject to the distance to the Exchange.
DLS at less than 3.5 km can be done at 20Mb at most exchanges.
At some exchanges there is roll out of some Fibre optic services.
In most larger towns and cities there is normally the option of a Cable service that offers similar figures.
In some parts of Sweden you can get 100Mbps services.
When the speed from your ISP varies a large amount then iChat will drop Frames to smooth out the Video
There comes a point when so many frames are dropped that the Audio will not make sense and will be dropped.
At about 128kbps a 5% variance will take you below the 100kbps mark (after allowing for the actual connection overheads)
At 10Mbps that 5% variance can be (in round terms) 500kbps
(A 500kbps service is itself good enough for a 4 way Video chat)
My experience is that PC users on AIM tend to only send the Pic at 10 frames a second (Fps). Any slower than this and the picture losses it's smoothness and flow.
You may see different Speeds and Frame Rates when you Call Out compared to when others Call In.
Setting the Bandwidth Limit to a lower figure such as 500kbps (fast enough for 4 way chats) may get around any variances in the speeds you see in the Connection Doctor during a live chat.
7:43 PM Friday; June 22, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.7.4),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I am unable to access my LR5.7 Catalog of my recent holiday. I am running Windows 7 (64Bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot be opened because another application already has it opened.Quit the

I am unable to access my LR5.7 Catalog of my recent holiday. I am running Windows 7 (64Bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot be opened because another application already has it opened.Quit the other copy of Lightroom before trying to launch" The problem is, that I can only see one copy of LR5 open and cannot locate the ".lrcat.lock" file for the specific catalog I want to open. I have tried re-booting my computer, but this did not work.

Thanks Geoff. I was finally able to locate the ".lrcat.lock" file relevant to the catalog I want to open. Once I deleted it, LR5 was able to access my images. Problem solved. THANK YOU

Every time I sign into my Macbook, I get an error message from Automator; "The data couldn't be read because it has been corrupted.". I have never created an Automator workflow. How do I find out what Automator is trying to run and stop it?

Every time I sign into my Macbook, I get an error message from Automator; "The data couldn't be read because it has been corrupted.". I have never created an Automator workflow. How do I find out what Automator is trying to run and stop it?

Maybe it's set as a login item:
- System Preferences: Users and Groups:
- Highlight your user account in the left pane/list
- Click "Login" tab at the top.
See if you have an Automater action on the list
- Note, you can select it, then right-click, and can then select "Reveal in Finder". That way you might have an idea what installed it.

Macbook Pro Startup Disc Error Message

Similar Messages

Maybe you are looking for