Macbook Pro stuck at loading screen

Hi ,
My Macbook Pro is stuck at the loading screen with the apple logo and a spinning wheel!
I Have tried CMD and R
i have also tried the Option button
PLEASE HELP!!!!

Hi there lukeoli10,
I would recommend taking a look at the troubleshooting steps found in the article below if your computer is unable to boot past the Apple logo. 
 Mac OS X: Gray screen appears during startup
-Griff W.

Similar Messages

  • Macbook Pro stuck at loading screen, one more question

    I recently posted on the discussions forums about my MCP problem. Essentially, after a freeze I turned it off via the power button and then it does not turn on, stucking at the loading screen with the apple logo and the spinning wheel.
    I know that this is a widely known issue, and common solutions are to reset pram and try turning it on with through the install disk. I tried everything, but to no avail. Although I could turn it on through the install disk and run the Disk Utility program, it said that everything appears to be OK. So I was wondering if it is a hardware problem and I must get it to the apple store (which is a problem for me) and consult one of the genius members, or is reinstalling everything through the original disk might solve the problem as well?
    When I turned it on through the disk, it had no problems booting. If I back all my data up, and then make a reinstall from scratch through the disk, would it solve the freezing problem?
    I appreciate your help.

    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Reinstall OS X.  This will not erase your hard drive.
    Given that this is widely known then before posting your question you should have searched the forums to find previously posted solutions.

  • 2011 Macbook Pro Stuck on White Screen and Won't Shut Down

    Greetings,
    I just received a 15 inch Macbook Pro with a 2.2 i7 processor earlier today. On my previous computer, a 2009 MB P with a Core2Duo, I've had a shutdown issue on it for the past week or so: when I click the power button, and confirm the shutdown, the computer would start shutting down as normal, however once it reached the white screen with the spinning loading symbol at the bottom, it just got stuck on that. As I've transfered my old data to my brand new computer, I'm still having the same issue with it. I was wondering if this was due to a worm, or some software incompliancy? If anyone could shed any light, I'd be greatful.
    Thanks.

    thecloakedone wrote:
    I'm running the old Final Cut Studio (2) (still have to enter my serial), and am also running these apps which could be considered out of the ordinary: *VLC
                                                      *Audacity
                                                      *CleanMyMac
                                                      *Mirage
                                                      *Handbrake
                                                      *MiroVideoConverter
                                                      *RecBoot
                                                      *SuperDocker
                                                      *PlistEditPro
    That's all. Everything else is either from Apple, Adobe, or is downloaded from the app store.
    Were you using any of them when the issue occurred (or just prior to it)?
    Have you looked for updates on all of them?
    If you want to do some digging, open Console and look at the logs at, and just prior to, the time of the issue.

  • MacBook 13" Stuck on Loading Screen & Start-up Issues

    Yesterday, after crashing I performed a hard shutdown of my MacBook, afterwards my MacBook was stuck on the startup screen with the spinning gear. cmd+R hasn't helped as there appears to be nothing wrong with the disk 'apparently', therefor no repair can be made. When attempting to enter safe mode I found myself in a situation where the loading bar would disappear half-way through and after over an hour it would still be 'loading'. In attempting to repair my MacBook I have performed a few hard shutdownds which is likely to have made matters worse. Any help would be greatly appreciate - I'm currently boarding at school and desperately need help as I need my laptop.

    Go into the recovery partition and use DIsk Utilities:
    http://www.apple.com/macosx/recovery/
    http://support.apple.com/kb/TS1417

  • My 2014 MacBook Pro stuck on grey screen since trying to update software over an hour ago

    My 2012 MacBook Pro has been stuck on the grey screen for more than hour since I tried updating the software.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • Macbook Pro stuck on grey screen with Apple logo

    Macbook Pro was purchased in mid-late 2009 and is running on OS X 10.6. Today is suddenly stopped responding and so I turned it off. When I turned it back on it opend to the grey screen with the Apple logo and the loading icon and that is where it stayed. I have been searching for the answer on different forums but have yet to find a solution. My hard drive is appearing in the Disk Utility but not in the box when I try to reinstall OS X. Any suggestions on what to do?

    Create a data recovery, undelete boot drive
    dustysjuls wrote:
    Will that erase all of the files on my hard drive? Or will it just erase and reinstall the operating system? I do not have my files backed up.
    A #18 Reinstall Just OS X, details here:
    Step by Step to fix your Mac

  • Macbook Pro stuck at white screen on startup.  HELP!

    Right when i turn on my macbook pro, it plays the startup sound and gets stuck on the white screen. I can hear it running my cd right when the computer starts up. no matter what i do, i cannot get out of the white screen. it just stays there. same thing every reboot. Whats going on???
    HELP ME!

    Hi, I had this exact same problem with my 15in mbp just before Christmas. I shut it down one afternoon, and then later in the day switched it back on. It wouldn't boot past the white/grey screen. It wouldn't even get as far as the apple symbol. I tried to start it up several times, but to no avail.
    I called up apple support, and they had me run through various keyboard combinations at start up. Nothing worked. According to my observations and the apple telephone operator's knowledge, it was as if the keyboard wasn't booting up at all during the startup sequence, hence it was not responding to the key combinations. There was no fix available over the phone and the advice given to me was to take it to an Apple Store to have the keyboard replaced. Living in Prague Czech Rep, as I am, there is no apple store, only one reseller, which I resolved to take my mbp to the next day.
    However, before the night was up, I decided to to do one more thing. According to my (less-than-Vulcan) logic, since I was taking it to be opened up, and knowing that since the dawn of time, hitting machines has seemed to give them a new lease of life, I decided to see what a sharp thump to the side of the computer might do. It wasn't overly forceful, just enough to make me feel satisfied. Would you believe it, the **** thing started up the next second I pushed the power button!
    Well, I had many weeks of uninterrupted, blissful computer use until a few days ago. If you haven't heard, quite a few mbp users have been reporting cases of unresponsive keyboards and trackpads whilst running leopard, leading to kernel panics and I have now unwillingly joined their ranks. I am in no way an authority on computers (I think that's rather obvious from my repair technique mentioned above) but I have a suspicion that my little episode last Christmas is related to the current issue of the internal keyboard and trackpad becoming unresponsive, so I'd watch out for that in the future once you're able to get your laptop up and running again. There doesn't seem to be much information as to why this is happening, but for my part, I've found that it's more frequent if pressure is placed underneath the battery, and less frequent under Tiger than Leopard.
    I really hope, you're able to get your mbp up and running again. I know how utterly frustrating it is when it's not working and you have no idea why.

  • Macbook pro stuck on grey screen and making buzzing noise

    hi,
    Lately my mac has been playing up (1 year old), ever now and then it would make a funny buzzing noise, coming from the left side..  and i noticed it was running slower than usual. Im Running Mountain Lion and have 566GB of disk space left... after using it for about 5 minutes the buzzing noise would start and it would become unresposive with the spiral beach ball.  So i would have to hard restart it.  Now ever time i turn it on it gets to a grey screen and doesnt load further. eventually the sound starts again!! i have tried starting it in safe mode and verifying my disk in utilities where everything "seems to be ok" !!    someone please help!!!  

    Ethan997,
    define “an average disk”.
    Your question regarding fault is akin to asking “is it my fault or the car maker’s fault that my spark plugs no longer work?” — disks, like spark plugs, don’t last forever, and fault doesn’t come into it. Similarly, the fact that your disk (or spark plugs) worked yesterday and doesn’t work today is not a sudden “breakage” — by their nature, they have a finite, variable amount of time in which they do work. This is why (in the case of disks) making regular backups is important; when the disk stops working, you’ll have an easy way to recover from such a situation.
    That being said, if your MacBook Pro is still under warranty, you should be able to get a replacement disk from Apple. And even if it isn’t, you could  still try reformatting your current disk, to see if you can squeeze some more use out of it — but if the reformatted volume keeps needing to be repaired (and you have the patience to deal with recovering from the same situation again and again), that’s a sure sign that a new disk would be your best option.

  • Macbook pro stuck at white screen.

    My macbook pro is stuck at a white screen and doesnt boot. I tried resetting, tried to safe boot by pressing shift, nothing works,. It is stuck in white screen. Pls help.

    If you cannot select Recovery HD at startup, problem is serious enough to take the MBP
    to the nearest Apple store. They will help to resolve the issue.
    Have you tried pressing option key down while starting the MBP?
    Probably that has been tried already.
    Best.

  • Macbook Pro Stuck at Gray Screen When Entering Boot Options

    Hello apple community,
    I have a 15 inch MacBook Pro 2008, and I decided recently to replace the 250 Gb hard drive with a new WD Black 500 Gb hard drive. I backed up all the data onto my external hard drive and replaced the hard drive. Now I am trying to enter the disk utility to boot from the disk utility by holding the option key. When I turn on the computer and hold the option key it gets stuck on the gray screen. Does anybody have any idea why this is happening? Thanks.

    OK. When you say it doesn't work does that mean you cannot see the drive in Disk Utility? Of course that means you need to boot from another drive such as your external backup. If you happen to have a Snow Leopard DVD to boot your computer then you could try with that. But there isn't much you can do if you don't have another bootable drive in an external enclosure or other form of hookup like a universal drive adaptor.
    Your model is not new enough to use Internet Recovery. I don't know what more to offer. You cannot even verify that the new HDD is OK by putting it in an external enclosure.

  • MacBook Pro Stuck At Login Screen Showing White Screen.

    Hello.
    I recently got a MacBook Pro 13" with Mac OS X Lion.
    After I installed some updates and software, i rebooted and now its stuck
    at the login screen with a white screen. I can still move the mouse but nothing happens.
    I tried to restore my Mac, but it requires an internet connection. My network
    is setup as non-DHCP. I have to setup a manual IP address, but there aren`t any settings to do that.
    Is there any way to restore Mac OS X without an internet connection?
    Thank you for your answers.

    The  only way to use Lion Recovery is with an internet connection.

  • MacBook Pro Stuck on Gray Screen

    My MacBook Pro is stuck on the grey screen and won't move past it. I have tried safe startup, resetting the NAVRAM, I am currently in the disk utility and when I verify disk permissions, it says this:
    - user differs on .ds_store, should be 0; user is 501
    - group differs on .ds_store; should be 80; group is 20
    - permissions differ in .ds_store; should be -rw-rw-r-- ; they are -rw-r--r--
    - unable to set owner and group on .ds_store; error 22: invalid argument
    - unable to set permissions on .ds_store; error 22: invalid argument
    - user differs on Applications/.DS_store; should be 0; user is 501
    Specs:
    System Version: 10.8.5
    System Build: 12F45
    I honestly don't remember the year.
    Also, no backups at all. I checked my box for original install disks and don't see any so I assume they don't come with any, anymore. Any help is appreciated!

    Mac OS X: Gray screen appears during startup - Apple Support

  • MacBook Pro stuck on white screen with apple logo. HELP!!

    For the past few days my MacBook Pro has been stuck on a white screen with the apple logo and I have tried everything. Does anybody know what I can to to get it to work normally again ?

    Read over these articles for possible solutions:
    http://support.apple.com/kb/ts2570
    https://discussions.apple.com/docs/DOC-5282
    https://discussions.apple.com/docs/DOC-3353
    Ciao.

  • Brand new macbook pro stuck on restart screen

    Brand new Macbook Pro is stuck looping on the Restart screen. I bought in Australia, but live in PNG who has no Apple support. Anyway I can fix it easily?

    Contacted support and was talked through a safe boot.
    Now everything is fine.

  • MacBook Pro stuck on boot screen

    Hello, I have recently turned on my 2010 MacBook Pro to find that it stays on the white boot screen with the little wheel spinning :( I have no discs or anything to restore my computer back to. What can I do?

    First see if you can boot into your Recovery partition by holding down the command and R keys whilst booting. If you can get there use Disk Utility to Verify and, if needed, repair you hard drive. If the drive can't be repaired, you'll need a new one.
    Clinton

Maybe you are looking for