Macbook pro stuck on apple

macbook pro stuck on apple

Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Mac OS X 10.6.8 Update Combo v1.1.

Similar Messages

Macbook pro stuck at Apple Logo with Loading Spiral

My Macbook Pro is stuck at boot screen with loading logo. I tried booting it into Safe Mode, but when booting into safe mode it does not even progress. The bar will disappear in about 2 mins. I also tried verifying the hard drive, then repairing it. I had a idea of re installing the OS, but I am concerned because I am afraid that re installing the OS will wipe the drive. Any ideas? Please help, thanks.

Having sane problem as you experienced. My MBPR 15 inches mid 2012 running 10.9.1 fail yo boot without known reason. It happen to me three times during the last 60 days. Must restore from. Time machine backup.
See,s to BR graphic problem. Harv Fikes bug with Apple but no response so far.

Macbook Pro Stuck at Apple Logo (gray screen) and keeps restarting

I've a problem with my Macbook Pro wherein it keeps getting stuck at the Apple Logo upon restarting (no spinning wheel). It eventually restarts itself maybe after 5 minutes but still keeps getting stuck in the grey screen where the Apple Logo comes up.
I've tried restarting this with CMD+R to do a "fsck -fy" and here's what I keep getting (attached picture). This screen eventually exits and my Mac restarts itself and gets stuck at the Apple Logo (grey screen).
I think this maybe a HD problem (possibly some corrupt files). Any suggestions/similar experiences? Any chance this can be resolved without reinstalling OS X?
Thank you!!!

Kreis wrote:
Any chance this can be resolved without reinstalling OS X?
Without erasing and installing yes.
Run through this list
..Step by Step to fix your Mac

Please help me! MacBook Pro stuck on apple logo and spinning wheel

Hi I'm really desperate and need help! My MacBook just stopped loading and would stay on the gray screen with the apple logo and spinning wheel.
I have tried safe mode and it would load a little and stop and then the loading bar would be blank and it would stay like that forever!!
I also have tried doing the single user mode and when I type the fsck - fy it will do a couple more lines then it will say error like a hundred times :(
I did verbose mode and it would just give me stuff that I have no idea what it saying I left on verbose mode for like 5 hours and it would just give me lines of stuff I have no idea what it's saying!
I downloaded lion through apple store so I don't have the disk I only have my snow leopard disk
Please please someone tell me a solution it's my moms laptop and I don't want to get in trouble!

Reboot in recovery mode an possibly repair over the internet.
Command-R to the rescue.
Just hold down Command-R during startup and OS X Recovery springs into action. It lets you choose from common utilities: You can run Disk Utility to check or repair your hard drive, erase your hard drive and reinstall a fresh copy of OS X, or restore your Mac from a Time Machine backup. You can even use Safari to get help from Apple Support online. And if OS X Recovery encounters problems, it will automatically connect to Apple over the Internet.
http://support.apple.com/kb/HT4718

Macbook Pro Stuck at Apple Logo and Spinning Wheel

I Have ML. Just did the most recent update. There seemed to be a bundled group of updates. Once all was updated, my computer froze. I shutdown and restarted and it was stuck on the Apple Logo and spinning wheel. I have tried everything. Safe Mode, Command R, Command/Alt/R/P....it does nothing. Any advice out there?

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

My Macbook Pro shows the apple and spinning wheel at start up but won't continue startup. Any Help would be appreciated.

My Macbook Pro shows the Apple and spinning wheel at startup but will not continue the startup. Does anybody know how to get past this, so the computer continues to startup?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 9
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

I want to connect my MacBook Pro (2009) with Apple TV

I want to connect my MacBook Pro (2009) with Apple TV
I updated my Mac to Mountain Lion OS X 10.8.2 (12C60)
I had tried connecting my Mac for many time but I could not.
iTunse is connected with Apple TV

Read this link. http://support.apple.com/kb/ht5404
2009 MBP is not supported for native AirPlay Mirroring. Sorry.
There are a couple of other pay-for apps that do this, but they're not as good... some people have had success.

How can i watch my macbook pro on my apple tv

Can i mirror my macbook pro on my apple tv?

It depends on which model MBP you have and what generation Apple TV you have.
See http://support.apple.com/kb/HT5404.
Clinton

Hi, I want to use my number for iMessage on my iPhone only and on my macbook pro use my apple id/email and not my number. Also how do i stop the iMessages on my mac appearing on my phone.

Hi, I want to use my number for iMessage on my iPhone only and on my macbook pro use my apple id/email and not my number, how do i do that? before i updated my phone thats what it was like but now that ive updated i dont know how to change it. Also how do i stop the iMessages on my mac appearing on my phone. can you please help. Thanks

I tried that but on my iphone i can only click on my email and my number is checked but its in grey doesnt allow me click on it and on my Mac, its the opposite, my email is checked but in grey so doesnt allow me to click on it. im realy confused

I cannot shut dow my MacBook Pro using the apple icon (as it was suppose to be), actually I have to press and hold the on/off buttom. I have taken twice for Mac dealer and they did not solve the problem. What must I do?

I cannot shut dow my MacBook Pro using the apple icon (as it was suppose to be), actually I have to press and hold the on/off buttom. I have taken twice for Mac dealer and they did not solve the problem. What must I do? I would to remark that I have installed 2 antivirus and uninstalled one of them. Since then I have facing this troublesome issue. Thanks

Uninstall the other AV software. They are not needed. All they do is cause trouble like you are having now.
If you have been forcing the Mac to shut down with the power switch you may nave corrupted your disk. You should repair it with disk Utilty to remove any corruption the shutdwons may have cased.
Allan

I've encountered 4HDD/11/40000000 SATA(0,0). AFTER SOME RESEARCH IN APPLE COMMUNITY, I LEARNT THAT IT'S A HARDWARE ISSUE. SO I WILL BE TAKING MY MACBOOK PRO TO NEAREST APPLE STORE. MY QUE IS, WILL IT BE FIXED IF I UPGRADE FROM OSX 10.8.5 TO MAVERICKS?

I've encountered 4HDD/11/40000000 SATA(0,0). AFTER SOME RESEARCH IN APPLE COMMUNITY, I LEARNT THAT IT'S A HARDWARE ISSUE. SO I WILL BE TAKING MY MACBOOK PRO TO NEAREST APPLE STORE. MY QUE IS, WILL IT BE FIXED IF I UPGRADE FROM OSX 10.8.5 TO MAVERICKS? What other options do I have? What can be an approximate cost for fixing this problem?

Of course not. It's a hardware problem, so it can't be fixed by upgrading software. The only option you have got is to take the MacBook to an Apple Store or reseller.
That error indicates a problem with the hard drive. What you have to do is to make a backup of your files and take the MacBook to an Apple Store or reseller, so they can confirm that the problem is the hard drive and not the SATA connector, which could be worse.
If it's a hard drive issue, it's not expensive (about $100-200, depending on the hard drive). If it's a SATA connector issue, the whole logic board may have to be replaced.
Note that you can replace the hard drive yourself if you want, but the cost between doing it yourself and taking the MacBook to an Apple Store or reseller is similar

Can I stream content from my macbook pro to my apple tv3 using a cable?, I don't want to use wifi.

Hi
Can I stream content from my macbook pro to my Apple tv3 using a cable connection?, I dont want to use wifi
Regards

fireguy999 wrote:
You have answered my question, thank you so much, I've just plugged in and found out that a direct connection will actually work via ethernet, but it works as Airplay mirroring and itune home sharing
No you don't need to use AirPlay from the computer to AppleTV.
Just use the AppleTV as you would with wifi. Everything is controlled from the AppleTV.

HT201343 When I mirror my macbook pro to my apple tv the only thing that shows up is one video that's on my desktop. How can I watch something that's online on my laptop, on my apple tv?

When I mirror my macbook pro to my apple tv the only thing that shows up is one video that's on my desktop. How can I watch something that's online on my laptop, on my apple tv?

Are you using mirroring or using airplay within iTunes? If you are truly mirroring then you can view anything that is displayed on your computer through Apple Tv
Or provide more info on your issue

HT4293 i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

<http://support.apple.com/kb/HT5891>
You can use USB for the Apple trackpad.
<http://www.mobeetechnology.com/the-power-bar.html>

When I turn on my macbook pro is no apple logo, just a black screen

when I turn on my macbook pro is no apple logo, just a blackscreen!
what need i to do! sometimes it wont start up
I used switchsresx for my macbookpro but i removed it becouse it was not working but now when i startup my macbook Pro it shows a black screen!

Here's a link you might find helpful:
http://support.apple.com/kb/ht1564
Safe Boot disables several things, and you can look at the list and see if you can find the culprit. As Linc says, if you still have a problem, post a new topic so that it will get the attention it deserves.

Macbook pro stuck on apple

Similar Messages

Maybe you are looking for