Macbook Pro suddenly shuts off. screen goes black and won't turn off till after a few hours.

Hi everyone!
So I've had this problem from my macbook since months ago. It sometimes just shuts off by itself, the screen turning black and won't turn on until like after a few hours (sometimes a day, but sometimes you could also immediately open it just like that.)
When it shuts off and you plug the adapter it is still charging, the lights on the side of the macbook book still lights up just fine if you press the button on the side. the only problem is that it wont open until after a few minutes, hours or days (very unpredictable) (also tapping the macbook helps, I dont know if it "really" helps or not, but it works sometimes.) But when it open it will be working fine until another couple of weeks or 3 or a month (again unpredictable)
I dont know what's wrong with my laptop, please help me. It would be greatly appreciated! thank you so much in advance!

Hold the power button down for 10+ seconds.  Then bring the MBP to an Apple store for an evaluation.
Ciao.

Similar Messages

  • Macbook Pro 2008. My screen stayed black and is unresponsive.

    Macbook Pro 2008. My screen stayed black and is unresponsive and sleep light is on. I shut down and then restarted and nothing happened on screen but sleep light came on and is solid.

    It could possibly be the video card, or the logic  board.  You could try a smc reset if you have not done s yet.   smc reset:
    http://support.apple.com/kb/HT3964
    I had an issue similar to this, and there was a bad logic board, hard drive and video card.
    You might want to bring it in to the Apple store, they do the diagnostic for free and give you a repair price.
    They offer a flat repair rate, which they fix what ever is wrong as long it was due to liquid damage.
    The repair cost me about 1/3rd the price of a new machine and the machine has been fine ever since.
    It's worth getting it checked out.
    ATB

  • My iPhone screen went black and won't turn back on.

    Yesterday, my iPhone 4S screen went black and won't turn back on. So I tried just letting charge but after an hour nothing happened, so then I switched out the chargers and made sure the outlet I was using worked. But it still was black. Then I did a little research and I tried to put it into DFU mode but my power button has been broken for a few months now, so that didn;t work either. Then I tried restoring it, but my computer didn't recognize it!!! So then over night I let it rest with no power source connected to it. This morning I plugged it back into a power source and it showed the charging icon. I'm pretty that means it's still running, but I'm not an expert. PLEASE HELP!

    If you have got a different USB Sync cable try to charge your iPhone with that as there are possibilities that your current USB cable or Power Adapter is not Charging your iPhone. If it still doesn't work make an appointment to Nearest Apple Genius Bar

  • Mini DisplayPort to Dual-Link DVI Adapter 1.03 - screen goes black and won't come back

    I have a new Mini DisplayPort to Dual-Link DVI Adapter to allow my original Apple 30" Cinema Display to connect to the new Mac Pro.  Shipped straight from Apple, it is firmware version 1.03.  I've never had flickering issues as so commonly described, but the display will often go black (possibly after a screen power save) and not come back.  when this happens I am still able to connect to and use the Mac via remote connection.  But the only way to get the screen back is either to unplug the adapter and plug it back in to the Mac, or to shut down and power up the Mac.  Is anyone else seeing this issue?

    Hello,
    From the news page here...
    http://xlr8yourmac.com/
    See if it's related to this...
    It also seems to be related to later OSX versions, like 10.8.x & 10.9.x
    The 2012 macs (and later apparently) (also later OSX versions on earlier Macs can do it also), not waking normally from sleep after hours being in sleep. (noted here ...
    http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
    "Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
    The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
    A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
    About iMac sleep...
    http://forums.macrumors.com/showthread.php?t=1529750
    Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
    http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip
    Two users reported that the opposite worked...
    Try this: "sudo pmset autopoweroff 1" and "sudo pmset standby 1"

  • IMac screen is black and won't turn on

    I got a 27" iMac (intel) a couple months ago (mid-year 2010) and sometimes the screen won't start up after it goes to sleep. Most of the time, I will leave the computer and the screensaver will start then the display will turn off and go black. When I return and hit a button on the bluetooth keyboard or move the Magic Mouse around, the computer will come out of sleep, display will turn on, and everything works the way it's supposed to. However, every now and then, the screen will go to sleep (turn black) and it won't turn back on when I hit the keyboard and move the mouse. I can just barely hear the fan still working, so I know the computer is on but asleep. Even when I hit the power button or hold it nothing happens, it won't even restart. I have to physically unplug the power cord and replug it back in then hit the power button to get the computer to start up again. I have moved the computer around to different outlets and even tried it at a different house, but this issue still occurs. Am I doing something wrong with the Energy Saver settings or is there just something wrong with my computer?
    Thanks!

    Hi, I hope you find this information useful:
    A few years ago, we purchased iMac 27" 11,3 (Mid-2010) (with i7 2.93Ghz, ATI 5750 1GB VidRam, etc.) for our offices and software development team. They were originally shipped with Snow Leopard and worked as expected and without any problems. However, a year later, we upgraded to Lion and all of machines immediately exhibited the same problem: the screen would go to sleep by itself and would require a hard reboot or sleep on/off. (Only the screen was asleep and the rest of the iMac continued to function; this was confirmed by screen sharing to the machine.)
    Due to the severity and impact on our business, we immediately contacted Apple and their genius bar staff in New York/SoHo. They were unable to determine the root cause, so they replaced all of the logic boards, video cards, and screens, and got us back online asap. This resolved the problem, but we were curious to know why. After days of rigorous testing, we concluded that the issue is caused by a bug in MacOS. Specifically, faulty Kext files (Kernel Extension files extend the functionality of the MacOS Kernel) for the ATI drivers.  So, why did the replacing the hardware work? We think that the Kext files that were released and distributed with Lion (and later MacOS versions) correctly supported the newer hardware revision of the replacement components, but not the older ones.
    If you're experiencing this problem, short of replacing the components or waiting (for another 3+ years) for Apple to hopefully fix their OS software, you can lessen the effects and be able to recover faster by doing the following: (Please bear in mind that these are not permanent fixes.)
    Turn on "Hot Corners" and assign one corner to "Put Display To Sleep". When your screen goes to sleep, move your mouse (which still works) to that assigned screen corner for a second, then move it again. This will wake your screen. You may have to do this a couple of times, but it's much faster than a hard reboot or a sleep on/off for your iMac.
    Turn the brightness of your screen to a low setting (10%-15% of the total brightness).
    Turn on screen sharing, so you have a last resort method of accessing the machine.
    If you're not convinced that it's a MacOS software problem, then do what we did and see for yourself; install Windows 7, Windows 8, or Linux via Bootcamp or as the only OS on the iMac. Those operating systems and drivers worked flawlessly for us; the bug does not occur and the screen does not go to sleep, but if you dual boot and switch back to MacOS, the bug reappears because the iMac is loading faulty Apple MacOS software.
    Good luck!

  • My iphone 4 screen went black and won't turn on

    My iphone 4 today mysteriously won't turn on, I tried charging it and it won't even charge. I was using it a few hours before hand it was fine with 100% battery and I haven't put it in any water so I am confused as to why this has happened. Can someone please tell me what to do and why has this happened?

    I had the same for the second time today... no way to turn it on !! it was 63% loaded and on my desktop without activity (on the iphone ;- ).
    tha only way to turn it on is to unscrew the two scren at the bottom, remove the back cover then unscrew a screw on the bottom left, close to the black battery, then you unplug the plug, wait a few second, plug it agin and screw.
    Then turn it on ! it works twice ... then your iphone will first set as 1st of january ... but later recover everything date, time ... then i had a prompt with "imap.gmail.com" not recognised (written in french, i am french !), then i had a "dataaccessd" screen asking to accept the Equifax Secure Certificate Authority as non thrusted ... don't know what it is but asnwer YES and ACCEPT then iphone is fully operational ... until next crash !
    Fred

  • My iPhone 5 c. Won't turn on. It was charging last night and this morning screen is black and won't turn on. It is only a month old

    My iPhone 5c. Won't turn on. It was charging last night. But screen is blank this morning.

    See Here for  >  Frozen or unresponsive iPhone
    Try this First... No Data will be Lost..
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • When I go to view a video I downloaded from iTunes the screen goes black and won't play. Tried turning it off multiple times. Still downs not work

    Worst part is I am on a plane and now have time to kill as I can't watch my movie right now

    Quit the video app and try again.
    Go to the home screen first by tapping the home button. Quit the app by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on the video app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the app. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Launch the video app again and see what happens.
    If that doesn't work - go to the home screen again and swipe to the right to bring up the search feature. Type the name of the movie in the search field at the top. If the movie shows up in the search - tap on the icon and hopefully it will start playing. Let it play for a couple of minutes and tap done. go back to the video app and see if the movie appears there. If so you should be able to play it from there.
    If that doesn't work, try resetting the iPad and launch the video app again.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • App shuts down, screen goes black and an apple appears

    What does this mean?

    Perform a Reset...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    If no joy...
    Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/ht4097
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • IPhone screen went black and won't turn back on and everything else is working besides that.....HELP!!!!

    The description says it all.....my lock button on the top is broken (iPhone 4).....not sure what to do.....any ideas?

    Take it in for repair.
    Genius reservation http://www.apple.com/retail/geniusbar/

  • My macbook pro 12 laptop home screen is black

    my macbook pro 12 laptop home screen is black and won't do anything. I can log onto my guest account but not my main account. How can i fix this?

    What is a Macbook Pro 12?  Which os is installed on your computer?

  • New (3mo) macbook air screen goes black and sometimes won't come back on after I unplug it from the power cord.  Any ideas why it is doing this? Sometimes I have to hold power button for 10 seconds for it to shut off then back on.

    New (3mo) macbook air screen goes black and sometimes won't come back on after I unplug it from the power cord.  Any ideas why it is doing this? Sometimes I have to hold power button for 10 seconds for it to shut off then back on. Sometimes holding the power button for a second is enough for it to come back on.

    I took it to the Genius Bar, and they identified it as a hardware issue. Just got it back today. Parts replaced were:
    620-5629 Display Module — Symptom: Distored/blurred/focus video issue
    605-3284 Top Case with Keyboard — Symptom: specific key(s) do not work
    So far so good. I'd suggest taking it in and not trying to work around it — it's a rare hardware issue (given the number of threads about it) and should be replaced.

  • While browsing the internet with my iPhone 4S the screen goes black and it looks like it's turning off, but it pops up to the unlock keypad screen.

    While browsing the internet with my iPhone 4S the screen goes black and it looks like it's turning off, but it pops up to the unlock keypad screen. It has plenty battery and I was wondering if it is an issue of using too much of the iPhones RAM or not. I have no other apps open besides Messages. I am getting kind of worried as it started around two weeks ago and it has gotten increasingly frequent.

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these steps in order until the issue is resolved.

  • My iphone's screen goes black and it behaves like that it is switched off.No switches work and the power button also does not respond.The ringtone do not also respond.The only way to switch on the phone is to press  home button and  power button together.

    My iphone's screen goes black and it behaves like that it is switched off.No switches work and the power button also does not respond.The ringtone do not also respond.The only way to switch on the phone is to press  home button and  power button together.

    Pressing the Home button and the sleep/wake or on/off button together until you see the Apple logo and then release is called a reset.
    If no change after a reset, the next step is restoring your iPhone.

  • Screen goes black and I get steady beeps

    I have a 2004 HP Pavilion a600n, AMD processor with Window XP SP3 and 1 gb of ram. I have no viruses or spyware due to running McAfee, Malwarebytes, Spybot, Spyware Blaster, and Advanced System care.
    My pc starts fine, but after about an hour, the screen goes black, and I get a series of steady beeps about a second long. There are no short, long beeps. Just steady short beeps and a black screen.
    I am forced to shut down via the power button. When I try to restart, the beeping occurs again, and the monitor light remains orange.
    I will let my pc sit for a day or two, and I can start it back up, the monitor light is green then, but after an hour, the whole process starts over.
    I have no way of knowing if it's ram, video, or fans. My video is built into the motherboard.
    I will run PC Doctor and clean the dust out of the fans, etc.
    But I do not have a lot of money to just randomly go about replacing parts. Does anyone have any idea what is the  most likely culprit?
    Thank you in advance for any help.
    Kaat1220

    This shows how to get inside: http://h10032.www1.hp.com/ctg/Manual/c00225826.pdf
    If you have never done something like this before, maybe enlist a friend to help.  I suggest you not remove the CPU heat sink if that chore is not a task done before, at least without a knowledgeable friend along.
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

Maybe you are looking for

  • I1112 status of Shopping cart- Need to create a follow on document

    Hello Experts, I have one issue in which enduser had created a shopping cart and header status is approved but no follow on document is generated. at line item level the status is Error in Process. When i ran the report BBP_ALERT_SB_NOTTRANSFERED. th

  • Has anyone tried to have their glass screen repaired on the ipod touch

    I've gotten a lot of results searching for repair on the glass screen, even sites that have kits for doing it yourself, has anyone tried to have their screen repaired this way?  I know about the trade in offers, but I've seen repairs as low as $25.

  • Accessing column clicked data value

    I have a datagrid with an itemDoubleClick function. In the function I can get the row and column that was clicked but cannot figure out how to get the value stored in that cell. Using the code.. datarequest.lastResult.MyData.answer[event.rowIndex] .d

  • Editable ALV- Disable Add, delete row buttons

    Hi, I have an editable ALV using OO Grid. Some columns are editable and some are not using field catalog. I want to disable the 'add new row' and 'delete row' buttons. How to go about it ? Regards, Vin

  • Keyboard and search not working!!!!!!

    my upper case icon and #'s as well as the space dont work and search is not working just the lower lines dont work ...tried restore nothing!!