Macbook Pro temperature higher than ever after Leopard

My Macbook Pro is getting to very high temperatures after installing Leopard, simply browsing applications like iPhoto.
Was there any major change on the power management?

On my macbook White 2ghz 1g ram since upgrade to leopard the fan will for no apparent reason take off like a jet plane for long periods of time. even when system seems to be idle, only mail, ichat, and the evil msn messenger running (no screensaver just slept monitor, No time machine). This has turned my nice well looked after shiny white plastic at the bottom of monitor near vent a horrible brown color and warped the plastic surrounding monitor at bottom of screen (now leaving a gap)! will be returning this mb to apple store for there inspection as soon as possible. I'm not a happy chap!!! battery life also severely reduced and wants to keep charging for ever at 99% capacity. No probs at all with either fan or battery before leopard install. (All software/firmware up to date. No apparent run away apps) Can any one help?

Similar Messages

MacBook Pro Won't Start up after leopard Install

I installed leopard on my MacBook Pro 2.0 GHz Intel Core Duo. Well at the end during the restarting phase it took forever to restart and my power was running out so not sure if it restarted or batt went dead. After recharging i turned on mac and wont boot up past the apple with dots hovering it. Don't know much about macs so if you could help it would be appreciated.

MacsReh wrote:
I installed leopard on my MacBook Pro 2.0 GHz Intel Core Duo. Well at the end during the restarting phase it took forever to restart and my power was running out so not sure if it restarted or batt went dead.
Welcome to the Apple boards:
You installed Leopard on battery power? That's a real big no no. A very risky gamble at best.
If your battery died during install, you may well have totally hosed the system.
After recharging i turned on mac and wont boot up past the apple with dots hovering it. Don't know much about macs so if you could help it would be appreciated.
See if you can boot into the Leopard DVD (hold down "C" on boot) and after the language screen, on the top left will be a menu. Select Utilities, run Disk Utility and repair your HD and permissions.
See if that gets you somewhere.
Message was edited by: nerowolfe

Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.

My Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.. I wonder what's the work around or troubleshooting to fix this. Thanks!

try and Reset the System Management Controller (SMC)

I own a late 2009 Macbook Pro, and it keeps freezing after OSX Lion installation.

I own a late 2009 Macbook Pro, and it keeps freezing after OSX Lion installation. I will post my computer's 'specs' below. I installed Lion, from Snow Leopard, through the App store. The first week, it worked like a dream, and was loving my brand new computer, or so it seemed. I then began to run into problems, and I can't confirm this 100%, but I believe it was after I updated from 10.7.1, to 10.7.2.
The freezes are sporatic at best, and cannot be narrowed down to one app. I googled the issue about two weeks ago, and found a fix involving a temporary log-in, verifying the disk, restarting the computer holding CMD+R, and repairing the disk from there. That fixed the problem. For about three or four days. From there I brought my laptop to Best Buy, where I purchased the computer (start the groans, my dad wanted the accidental damage, and he was paying, there was no argument). My warranty there was still good, but all they were offering was to check my hard-drive, and possibly ship it out. That would not be good for me, as I am a High School student, who works online.
So I then decided to go to the Apple store, see what they said. They said a bunch of people had this problem, it would cost a lot to fix, as I would need a new Logic Board. This did not make any sense to me, as I knew it was Lion's fault, so why would they not make the L-2009MBP Logic Board compatible, and why are only a few people having this problem, well a lot more than a few, but I mean not everyone.
So I asked a friend about it, and we decided to run a back up, and erase the computer, and re-install Lion. Figuring maybe my data was corrupted during install. This helped for a day or two, and happened again. So this time, we backed up only files (music, pics, documents, etc.,) and did a fresh install. I got my computer back last night. Now, I am not saying that didn't help. Previously I would have frozen about 18 times well writing this, but I have not frozen once (hopefully I didn't just jinx myself). I have gone from about one freeze every 10-15 minutes (sometimes worse), to about one every 1-3 hours. Which, let's be honest is still a lot.
So, before I just decide to go and revert to Snow Leopard on my merry way, I ask, do any of you have any other ideas? Or guarenteed fixes? I know a guarentee is a hard thing to ask for, but I am desperate, my teachers are getting angry with me for not sending work, and I know this would help a lot of people. Thank you to those who read through my whole spiel, and thank you to those who will help me!
[Ps, while I am somewhat of a noob, I know my way around a computer, so any help, or knowledge you could bestow upon me is awesome. Especially DIY fixes. (if your only advice is, don't buy a mac at Best Buy, don't bother commenting)]
Macbook Pro
15-inch, 2.53GHz, Mid 2009
Processor: 2.53 GHz Intel Core 2 Duo
Memory: 4 GB 1067 MHz DDR3
Graphics: NVIDIA GeForce 9400M 256 MB
Software: Mac OS X Lion 10.7.2 (11C74)

Once it is downloaded you need to restart the computer if it does not restart automatically. When it next starts up you should note a progress bar appearing below the Apple logo. When done the computer will restart once more. The new firmware should now be installed.

MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Fixed!

MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Airport says no IP is detected then suddenly reconnects?
This has been a problem I’ve been troubleshooting for the last month. I’m new to the Mac family and have loved my experience up until this point. I was under the impression that mac’s are supposed to be so user friendly that even your grandmother could use one with out having any technical knowledge. I mean I shouldn’t have to be deleting drivers or reformat my mac because of an OS update glitch? (That’s what the guy at the Genius Bar told me to do.) What I refused to succumb to was that I’m really good with computers. I get at least a phone call every other week from someone asking me for tech support. So I’d like to think that nothing I’ve done to the system would have caused this anomaly.
After numerous attempts of troubleshooting and researching forms I believe I’ve discovered a solutions that seems to be working for me.
Here are the steps I took to create a consistent connection to my Wi-Fi. I believe it was a combination of all these steps to create success.
1.) Changed my router to use G Wireless Only. (I’m assuming this removed any unnecessary frequencies to allow G to broadcast stronger?)
2.) Did a scan on the other networks in my area to find out what channel everyone else was broadcasting on. Copy and past the text below into a terminal window.
sudo ln -s /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resourc es/airport /usr/sbin/airport
This will allow you to simply type “airport” in the terminal window to execute the command.
Type airport –s
This will display all the networks in your area and what channel they are broadcasting on.
3.) Changed my router to use a channel that no one in my area was using. (This helped to make my network stronger and free of interference.)
The last steps will help your home network improve but these next steps I believe helped fix any install errors caused maybe by the 10.6.5 update on my mac.
4.) Boot your Mac into safe mode by holding down the shift key while booting.
5.) Open System Preferences and Click on Network.
6.) Click the drop down menu from Locations at the top of the screen. Click edit locations..
7.) Create a new location by clicking the + and give it a new name.
8.) Delete the old location by clicking on the old locations name and click the – to remove.
9.) Reboot
10.) Open System Preference and click on Network.
11.) Click on the settings sprocket next to the + and – and click on Set Service Order…
12.) Drag Airport to the top of the list of devices then click Ok.
Now this last step is what seemed to eliminate the issue. I hardcoded my IP address to my network. This way my computer will always use the same IP and not have to search.
13.) Click on Advanced under Network.
14.) Click on TCP/IP. Click on the drop down for Configure IPv4 and change it to Manually.
15.) Fill out the fields with your IPv4 Address: 192.168.1.1xx (x=whatever number) Subnet Mask: 255.255.255.0 Router: 192.168.1.1 (All of these settings are pretty standard for most home networks.)
16.) Click on the drop down for Configure IPv6 and change it to Off.
17.) Next click on the DNS tab at the top.
18.) Click the + to add a DNS Record.
To find your DNS Server open a Terminal window by launching Applications --> Utilities --> Terminal
Then Type cat /etc/resolv.conf
(There is a space between cat and /. Without it you’ll get no such file or directory.)
This should return two addresses. Your ISP’s DNS Servers.
19.) Add both records to the DNS and click Ok.
20.) Click Ok then under Network Click Ok.
21.) Reboot router then Mac
22.) Fixed my connection issue
The symptoms I experienced eluded me to believe that something with the DHCP is going into an idle then disconnecting. Before when DHCP was set to automatically assign the network signal would time out then searchers for a new IP resulting in Airport displaying No IP is detected. By setting my IP to a fixed address I still notice a slight drop in bandwidth at moments but because of the assigned IP I never loose connection. I can now stream video, play games, chat all without getting disconnected.
I believe this fix will work for my home network but I also noticed this issue at work so for each location that I connect for the time being I’ll create each there own location and hardcode the IP address to that network. I’ve been reading that 10.6.6 is coming soon so maybe this will be resolved for good in the next update.
Let me know if this helps or if you have any questions.
Best of luck.
Message was edited by: erockdabass
Message was edited by: erockdabass

I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this?

How do I partition my MacBook Pro so I can keep Snow Leopard and also install Mountain Lion?

How do I partition my MacBook Pro so I can keep Snow Leopard and also install Mountain Lion?
I want to install the latest OS, but I already know that I will lose a lot of my software unless I can partition the hard drive and have two "bootable" drives.
How do I retain everything I have, partition the drive, then reloa the software I own according to which OS it will work under?

msmedia wrote:
I do not currently own OS X ML.
I am currently running OS X (10.6.8 Snow Leopard) on my MacBook Pro. It has a 2.8GHz Intel Core 2 Duo Processor. I want to upgrade to Mountain Lion, but many of my software titles will not operate with ML and I cannot afford to replace some of them (Adobe Creative Suite, for e.g.)
After I back-up my HD and then partition the HD, how do I use the back-up to reinstall what I want to the SL partition, and then place the rest on the ML partition.
I have not done what you want to do, so can only offer some general thoughts in support. Take value from the following where you can. No guarantees.
If it was me, I would use a disk clone utility (e.g. Carbon Copy Cloner) to image the existing Snow Leopard disk to an external drive. Then verify that the external drive would boot and run Snow Leopard normally.
I would then purchase and download the Mountain Lion upgrade installer, but not run it. Use Lion Diskmaker to make a bootable USB stick, and perform a clean install of Mountain Lion, replacing the Snow Leopard on your MBP. This way, you make absolutely certain that no third-party drivers or other SL cruft remains to make Mountain Lion unstable. Update to latest ML point release. Fix permissions. Let TimeMachine make a full backup of your ML installation to a different external drive. Then turn of Time Machine.
In Disk Utility, use the + sign at the bottom of the ML partition to add another GUID, HFS+ Journaled partition for Snow Leopard. Resize to taste. Name it differently from your ML partition. Exhale.
Now ideally, you would like to reverse the external clone and put it back into the new SL partition. Then fix permissions. And demonstrate that you can boot into individually stable OS X installations. This would save you alot of work. Resist copying your home directory into ML just yet.
If you cannot successfully achieve the preceding paragraph, you will be faced with a full SL and application reinstall.
The ~/Library contents for SL and ML are sufficiently different that you do not want to mix them. You may want to salvage Safari bookmarks.plist. And, ML created folders in the home directory may have different permissions or ACL settings than in SL. So, my rule of thumb would be to copy folders that you created in SL, and only the contents of matching named OS created folders such as Music, Pictures, Downloads, etc.
For each operating system, you probably want the Time Machine settings to exclude the opposite OS X partition. If you use the same host name in Sharing prefs, then you will mix SL and ML backups on the same Time Machine back up drive. If you use different host names, they will be distinct folders in the Time Machine backups.backupdb and allow discrete restores per host. You may also want to gag Spotlight from indexing the opposite OS X partition.

I have a macbook pro 15 retina - when ever I connect to bluetooth speaker, I get this loud noise coming from the speaker - if I turn bluetooth off, the noise is now coming from the macbook speakers

I have a macbook pro 15 retina - when ever I connect to bluetooth speaker, I get this loud noise coming from the speaker - if I turn bluetooth off, the noise is now coming from the macbook speakers & stays until i restart.

Hi John. Thanks for that input. At Step 6, after clicking "Next" I get a window telling me my OS version is unsupported and the installation may not complete. I am prompted to go to Canon's web site to "Check Latest Info".
I've had this window on previous attempts and from Canon's web site I downloaded two drivers as follows
- ICA Driver V4.0.0
- Canon IJ Network Tool V4.5.0
I'm not sure if these are the correct / complete drivers I need for this install or not.
I continue to follow all the steps. At step 9 I click "Wireless Set Up using USB" amd get a License Agreement (a little different than instructions)
I click "Agree" and it goes to a Setup window with two progress bars showing the installation. I've not been prompted to connect the USB?
After the Setup window is done, I am then prompted to connect the printer via USB. I connect the printer and click on "Redetect". It is not detected.
I then try following the Canon on screen instructions for connecting to the wireless LAN amd enter the password. It searches and indicates "Connecting" on the window, but it never connects and the blue light just blinks
So, at this point I am stuck??
Thanks
Stephen

My Macbook Pro has become super slow after upgrading to 10.9.2. can anyone help please?

My Macbook pro has slowed down drastically after upgrading to 10.9.2. It has become so slow that i can hardly use it. I did an etrcheck
Hardware Information:
          MacBook Pro (13-inch, Mid 2012)
          MacBook Pro - model: MacBookPro9,2
          1 2.5 GHz Intel Core i5 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 4000 - VRAM: 1024 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 0 days 0:19:10
Disk Information:
          APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 499.25 GB (356.27 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
Launch Agents:
          [System] com.hp.devicemonitor.plist 3rd-Party support link
          [System] com.hp.messagecenter.launcher.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
User Login Items:
          iTunesHelper
          Dropbox
          AdobeResourceSynchronizer
Internet Plug-ins:
          FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
Safari Extensions:
          Adblock Plus: Version: 1.7.4.1135
          Ebay Shopping Assistant: Version: 1.1
          Amazon Shopping Assistant: Version: 1.1
          Slick Savings: Version: 1.0
          Searchme: Version: 1.3
          AdBlock: Version: 2.6.18
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
Old Applications:
          None
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
              29%          Safari
              16%          com.apple.WebKit.WebContent
               5%          PluginProcess
               4%          WindowServer
               3%          com.apple.WebKit.Networking
Top Processes by Memory:
          289 MB          Safari
          131 MB          com.apple.IconServicesAgent
          82 MB          com.apple.WebKit.WebContent
          82 MB          mds_stores
          66 MB          Finder
Virtual Memory Information:
          721 MB          Free RAM
          1.62 GB          Active RAM
          1.05 GB          Inactive RAM
          636 MB          Wired RAM
          1.18 GB          Page-ins
          0 B          Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Broadcom|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm "TCP/IP"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`find . -maxdepth 1 -exec basename {} + | while read f; do [[ ("$f" =~ ^\.. && ! "$f" =~ ^\.(adobe|android|bash.+|CFU.+|cache|config|cups|dropbox|DS_Store|filezilla|font.+|git.+|profile|rnd|sh_.+|ssh|subv.+|Trash(es)?|zprofile|zsh.+)$) || ($(stat -f%f "$f") -ge 32768 && "$f" != Library) ]] && ls -Fd "$f"; done`; Pm "Hidden user files"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

My MacBook Pro is running very hot after lion install. Are there any hardware changes that will help? What can I do to get it back to normal?

My MacBook Pro is running very hot after lion install. Are there any hardware changes that will help? What can I do to get it back to normal?

I get the impression that most of the users on older hardware experiences similar temperature issues on Lion for a long time now. Awaiting for confirmation from the original poster.
In the meantime I'm just cautious with regards to pushing the machine to such extreme temps, since something tells me such behaviour which includes monitor flickering and the likes is nothing but abnormal for any type of use...
Any clues if 10.7.5 does anything on this? If not I'm afraid i see myself going back to SL for good...

!!!HI, SO I BOUGHT MOUNTAIN LION ON MY MACBOOK PRO TRYING TO UPGRADE FROM SNOW LEOPARD, AND WHILE TRYING TO REINSTALL THE OS SETUP AS IT SHOWED IT COULDNT BE VERIFIED, I CROSSED OUT MOUNTAIN LION FROM MY PURCHASES, ITS NOW GONE, DO I HAVE TO BUY IT AGAIN?

HI, SO I BOUGHT MOUNTAIN LION ON MY MACBOOK PRO TRYING TO UPGRADE FROM SNOW LEOPARD, AND WHILE TRYING TO REINSTALL THE OS SETUP AS IT SHOWED IT COULDNT BE VERIFIED, I CROSSED OUT MOUNTAIN LION FROM MY PURCHASES, ITS NOW GONE, DO I HAVE TO BUY IT AGAIN?

Please google search for "Mountain Lion disk crash" before upgrading you mac pro. You might need to replace you Mac hard drive after the upgrade.So many people had the same problems including me.
Be aware of the Mountain Lion upgrade problem.

MacBook pro takes more than 10 minutes to start with ML ?

My Macbook pro takes more than 10 minutes to start. I press Start and it takes more than 10 minutes before I can enter my password. Need your help !

Sounds like time for a PRAM reset. Here's how:
1. Power down the machine.
2. Locate the following keys on your keyboard in preparation for Step 4:
‘command’ – ‘option’ – ‘P’ – ‘R’
3. Press the ‘power on’ button.
4. Immediately – and before the grey screen appears – hold down ‘command-option-P-R’ all together.
5. Keep them held down until you’ve heard the start-up chime twice. After you release them you should hear it again, and hopefully your Mac will boot up as normal.

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation. In OSx boot it keep Win keyboard. How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation.
Installation went well but when I boot either with OSx or Win it always keeps Windows keyboard.
How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

Hi - I have the exact same model as your MacBook and had a few questions as mine is acting up. I upgraded the ram to 8gb (2x 4GB ram) and ever since then my computer has not been running as smoothly and the start up time is horrendous. Have you encountered this problem? And if so how did you fix? What would you advise me do?
I was thinking of reverting back to the original factory 4GB then rebooting the entire computer. Any suggestions?
Thanks in advance!
Allen

My macbook pro is running really slow after upgrade to Mavericks

my macbook pro is running really slow after upgrading to Mavericks....any ideas?

OS X Mavericks: If your Mac runs slowly
The above link is not very useful, so if it doesn't help read on.
There are many potential reasons that a Mac may be running slower than expected, but more information is required to begin troubleshooting, much more.
Back up your documents and everything else important to you before proceeding. It is premature to conclude your hard disk is failing, but the symptoms you describe may presage an impending disk failure, and you should have backups anyway.
To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting:
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red.
When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
http://www.etresoft.com/etrecheck
Etrecheck will be in your Downloads folder. Open it from there. You may see the following dialog box:
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
After completing the above please determine if the problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
System performance problems for reasons that cannot be isolated to any other cause justify an SMC reset. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial.

Upgraded my macbook pro to mountain lion from snow leopard does this mean i can upgrade my imac as well for the same price? And will it mess it up?

upgraded my macbook pro to mountain lion from snow leopard does this mean i can upgrade my imac as well for the same price? And will it mess it up?

You can upgrade the iMac for no extra charge - sign into the App Store there, download and install 10.8.
I recommend that you make a backup (Time Machine is probably the easiest method) before you install, and make sure that you are not using any applications that are incomptible with 10.8 (eg Office 2004) - other than that, it should go smoothly.
Matt

I have a macbook pro and the software with snow leopard only has upgraded to 10.5.8, do I need to purchase mountain lion to upgrade to 10.6.8?

I have a macbook pro and the software with snow leopard only has upgraded to 10.5.8, do I need to purchase mountain lion to upgrade to 10.6.8?

Your machine likely can't handle Mountain Lion 10.8 nor 10.7, if it does it will run slow and very higly likely a lot of your third party software and drivers for printers and scanners won't function anymore.
It's because your 10.5 era (or earlier) machine is rather dated, hardware has advanced and is faster, the newer OS X versions have gotten bloated.
I do recommend you call Apple via phone and order the 10.6.3 white retail disks, backup your personal data off the 10.5.8 Mac to a external storage drive and when the disk arrives, stick it in and run the upgrade installer.
Once that's finished, reboot and use Software Update to get to 10.6.8 and stay there. You can buy stuff from AppStore, just don't upgrade to 10.8 (or 10.7) as thats when you'll have issues.
10.6 should run your currrently installed PPC software and hardware drivers. But 10.7/10.8 will not.
10.6 is receiving security and other updates from Apple as more than 50% of OSX users are still on it.
Most commonly used backup methods
Things to consider before upgrading OS X

Macbook Pro temperature higher than ever after Leopard

Similar Messages

Maybe you are looking for