MacBook Pro to 23in. Cinema HD Display

I was given a 23in Cinema HD Display (Model # M8536) and I'm trying to hook it up to my MacBook Pro. I got the Mini DisplayPort to DVI Adapter but my computer doesn't even recognize the display. Is this the correct adapter or do I need the dual-link adapter? My dad hooked the display up to his computer last night and it worked just fine so it is either the adapter or my computer. I'm not a computer person...please help!

Sounds like you're going to need the Apple DVI to ADC Display Adapter. Two problems: 1) Apple doesn't sell them anymore, try a google search; 2) They cost around $100, because besides providing the necessary video connection conversion and USB extensions, it actually powers the display. Note the absence of an AC cord for the display.
The now defunct ADC connection provided video, usb, and AC power connections in a single cord.

Similar Messages

  • Pixel Distorsion: MacBook Pro and 30" Cinema Display

    Connecting the MacBook Pro to the Cinema Display using the Dual Link DVI Adapter (USB from Display plugged in Adapter, Adapter USB plugged in USB Port > not next to Mini-DVI Port) produced wild coloured Pixel Lines in the Dark Areas (really annoying) and starting After Effects CS4 it even gets worse: The full Interface is blinking green on the edges of each Panel.
    Pleeeaaaaase help!!

    I have the same problem with my 30" HD display and the new 15" MBP. However, I did not have this problem initially. Until yesterday I had been fortunate not to experience issues (see reviews of the dual link adapter at the Apple store) regarding the 30" diplay. However, after contacting applecare about an unrelated issue, the technician had me restart holding the "shift" button. He said this would "correct a lot of stuff". Well it didn't seem to do anything except cause my 30" monitor to exhibit these same problems that everyone else is complaining about! Apple, please address this flaw!

  • I have a macbook pro 17" 2012 and the display colours are all too hard and the profile will not change it is stuck toLED Cinema display.

    I have a macbook pro 17" 2012 and the display colours are all too hard and the profile will not change it is stuck toLED Cinema display.

    Hello hbothner,
    Thanks for using Apple Support Communities.
    If you'd like to change the colors on your Mac's display, then you can calibrate your display by following the steps in the article below.
    OS X Yosemite: Calibrate your display
    Take care,
    Alex H.

  • I just ran a software update for Java and MacBook Pro SMC, now my Mini Display Port to HDMI TV is not working. The TV is flickering. The Mac Display is fine.

    I was just watching / streaming TV off Safari on my actual TV.
    I'm using a Mini-Display Port to HDMI cable for the connection to the external display.
    Software update popped-up and said there was an update for Java and for SMC.
    I ran the update and upon the computer restarting, my external display (my TV) is no longer working. It is now flickering.
    It won't work in Mirroring or set up as an extended display.
    I've reset SMC / PRAM / Safe Mode / Even restored from a Time Machine backup (From before the updates were done).
    What could it be?!

    I keep saying this over and over, in the hope that people who do a search will find it.  Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there.  The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple.  They're expensive, but they work perfectly.
    My guess is that you bought a cheap MDP to HDMI cable, or have a defective one.  From my reading of these boards over the past few months, cheap cables have a high failure rate.  And the regular priced ones have only a slightly less of one.  Try a new one.  Make sure you do not damage the Thunderbolt port.

  • Can I connect ps4 to my Macbook Pro with retina so it displays on the Macbook Pro.

    Can I connect ps4 to my Macbook Pro with retina so it displays on the Macbook Pro . If I can how do I do it and what do i need to do it.

    No. There's no video input.

  • Can I connect a G5 tower and Macbook Pro to one 30" Apple Display Monitor?

    I would like to know if it is possible to connect a G5 tower (older power pc) and a new Macbook Pro to one 30" Apple Display. If so, how would I do this? Thank you.

    <http://www.kanexlive.com/snapx>
    (Will not work with Thunderbolt display.)

  • Internal drive for Macbook Pro 13 inch with Retina display from late 2013?

    Hi everyone. After some water spillage to my new computer, the guys at the Apple Store have told me that my internal hard drive needs to be replaced. No other damage was done, thankfully. I have a Macbook Pro 13 inch with Retina Display from late 2013. The Apple genius said my current hard drive has flash storage, and that my new hard drive will need that as well as the computer requires it. Does anyone know where I can buy such a hard drive? Is it possible to buy it from Apple? I am happy to buy online or in a store (I live in Australia). Also, is this Mac Pro model difficult to take apart? I'd like to install the hard drive myself.
    Thanks in advance to anyone who can help!

    From the specs:
    STORAGE AND MEDIA
    Storage
    256, 512 GB, or 1 TB flash storage
    Media
    Optional Apple USB SuperDrive

  • I just bought an Epson Stylus Pro 3880 and the printed images look yellow. I calibrate my MacBook Pro monitor with a ColorMunki Display. I want to make sure my Lightroom print settings are correct.

    I just bought an Epson Stylus Pro 3880 and the printed images look yellow. I calibrate my MacBook Pro monitor with a ColorMunki Display. I want to make sure my Lightroom print settings are correct.

    This what I have been trying......  Maybe my eyes are screwed up or don't understand the process....
    What I have been trying to do is squint and make the apple disappear by moving the sliders around in each step. Is that correct?

  • My Macbook Pro 15-inch with retina display crashes sometimes when connected to an external monitor

    My almost-new Macbook Pro 15-inch with retina display goes black and shuts down sometimes when connected to my external monitor. (The first time it did this was when connected to a projector.) They have replaced the motherboard but it still happens sometimes. The computer and monitor both come back on after a few seconds.

    Welcome to Apple Support Communities
    To mirror your Mac's display onto your TV, press Command and F1 keys. Read > http://support.apple.com/kb/HT5019

  • Why won't movies or shows play on my Macbook Pro mid 2014 w/ Retina Display??

    I have a new Macbook Pro mid 2014 w/ Retina display and have not been able to play any movies via iTunes.
    Am I missing something?

    Here is what I see...

  • Change MacBook Pro 15-inch Glossy Widescreen Display in MacBook Pro 15-inch Hi-Res Antiglare Widescreen Display

    I bought a 15-inch MacBook a month ago, I would change the MacBook Pro 15-inch Glossy Widescreen Display in MacBook Pro 15-inch Hi-Res Antiglare Widescreen Display... is possible? and how much will it cost?

    Thanks! but there is a problem, I'm Italian and I live near Milan, and certainly I find it hard to send my mac. An Apple Store will not do this type of intervention?

  • I have a macbook pro from 2007 and the display memory slows do the screen so much it is almost unuseable  Any help fixing this problem?

    I have a macbook pro from 2007 and the display memory slows do the screen so much it is almost unuseable  Any help fixing this problem?

    Hi,
    Have you tried
    1.leaving the screen flipped open,
    2.connecting power
    3. connecting external monitor; waiting for it to 'wake up';
    then 4. closing lid of MBP to activate clamshell mode?

  • Brand new 15" MacBook Pro Retina - unplugged from Thunderbolt Display and Keyboards today find keyboard alpha-numerics not working; except the function keys, delete key, tab key, command/ctrl/shift/alt/fn and arrow keys; and 7/8/9/u/o/j/l nudge cursor

    Brand new 15" MacBook Pro Retina - unplugged from Thunderbolt Display and Keyboards today find keyboard alpha-numerics not working; except the function keys, delete key, tab key, command/ctrl/shift/alt/fn and arrow keys; and 7/8/9/u/o/j/l produce cursor nudges.

    It's a new machine - and the Thunderbolt Display is meant to work with it. You need to just make an appointment at your local Apple Store and have them fix whatever is wrong.
    If you like, you could always try a SMC reset and a PRAM/NVRAM reset to see if either of those will get your keyboard back in working order...
    Clinton

  • My MacBook Pro 13" Solid state Retina display stars then it will randomly show a gray boxed message asking:Are you sure you want to shut down your computer. It gives 4 alternatives Re start, sleep cancel or shut down

    My 2013 MacBook Pro 13" Solid state Retina display stars then it will randomly show a gray boxed message asking:Are you sure you want to shut down your computer. It gives 4 alternatives Re start, sleep cancel or shut down. This is what it shows before shutdown.
    Fernando

    This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

  • MacBook Pro (summer 2012) non-retina display and SSD upgrade?

    Looking to upgrade to a SSD in my MacBook Pro (summer 2012) non-retina display. Are there ones that work better in a MacBook Pro?

    In theory at least, any SSD will work fine. There are some additional considerations to make, however. It mostly revolves around updating the drive's firmware. Many SSD companies do not offer Mac-friendly ways to perform this procedure. From the list Clinton provided, you can drop Corsair and Samsung immediately for this reason.
    I would not consider OWC, Intel, or any SSD that uses a Sandforce chipset because of spotty reliability. Yes, improvements have been made, but I still do not trust them. Of the dozens of SSDs I've owned and deployed over the last 2-3 years, the only ones to need replacement were ones with Sandforce.
    That leaves Crucial, Plextor, and OCZ. The former two basically use the same Marvell chipset. While I can't speak for Plextor, Crucial's firmware updates are OS agnostic. You simply down an .iso file, burn it to CD, boot from that disc, and perform the update. It works perfectly on a Mac. Doing a quick check of Plextor's support site, it seems the proedure is the same.
    For OCZ, I'm only focusing on the Vector and Vertex 4. The former is brand new, having just hit the market within the last couple weeks. If you're looking to buy right now, I would stick with the Vertex 4 as it's a more proven commodity. OCZ has created a suite of tools that you copy to a USB flash drive. You can boot from it, and it takes you to what I think is a very heavily modified Linux distribution. From there, you can do a firmware update, check drive health, and perform a SATA secure erase to return the drive to its "out of the box" state. To get the most from the tools, you should have a USB mouse plugged in. Also, firmware updates require the use of a hard-wired Ethernet cable; you can't use wireless.
    Bottom line - for an SSD upgrade, stick with Crucial, Plextor, or OCZ as they are the most Mac-friendly (aside from original Apple parts, of course).

Maybe you are looking for