Macbook pro to epson projector via hdmi cable

Projector says "no signal" when i look at the HDMI port. Any suggestions?
I would like to simply project an iPhoto slideshow or a downloaded video.

ok...did further reading and found the answer...
system preferences....displays...arrangement tab.....check the "mirror displays" box.

Similar Messages

  • Have most recent macbook pro connected to thunderbolt via thunderbolt cable.  Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard.  Help

    Have most recent macbook pro connected to thunderbolt via thunderbolt cable.  Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard.  Help

    Hello QuinnDev,
    Thank you for posting in the Apple Support Communities.  It sounds like you are trying to use your MacBook Pro with a Thunderbolt Display in closed clamshell mode (MacBook Pro closed), but sometimes the display doesn't stay on.  I found an article that talks about closed clamshell mode.  You would have to fulfill the following requirements to use your display this way:
    Requirements for closed display mode:
    Power adapter
    External keyboard, mouse, or trackpad
    External display
    You can find all the steps and the full article here:
    Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
    http://support.apple.com/kb/HT3131
    I hope this helps!
    All the best,
    Sheila M.

  • Am i able to connect my xbox360 to my macbook pro with only using an hdmi cable

    pls anser my question am i able to connect my xbox360 to my macbook pro with only using an hdmi cable

    and yes i know i need another attachment to plug in the hdmi

  • Macbook Pro to Toshiba LCD via HDMI screen shuts off

    I have a mid 2010 model Macbook pro hooked up to a 46'' Toshiba LCD tv using the moshi connector and an HDMI cable. Every 25-30 minutes the screen goes black for 2-3 seconds as well the sound turns off. The picture then comes back, usually to shut off again for 2-3 seconds then will remain on for another 25-30 minutes. This happens each time I connect the laptop to the computer.
    I have returned the TV, connector, and HDMI cables and the issue has continue to happen. This leaves me thinking that it must be an issue with the computer. Does any one have any tips or ideas as to what I can do to stop this? Its really irritating to try and watch a movie to have the picture cut out periodically.
    Thanks

    Hi, Guys
    I'm using a MacBook Pro with a Samsung 610 52" color monitor for studio video production.
    I'm using an adapter to hook up the TV to the Mac via VGA. There are times when I can get the image on the screen, but any time I either start cold or have to change a cable, I get the message "check signal cable." I originally thought the problem was the cable, but changing out three different "known to be good" cables did not resolve. When select system preferences=>displays=>gather windows, the Samsung window with resolution options opens. Nothing as of yet immediately resolves the problem, but if I **** around with it long enough (plug and unplug cables, turn both computer or LCD off and on), eventually I get a picture. And yes, I never had this problem when we were using a Dell Inspiron. Any suggestions or resolutions, please let me know.

  • How to connect macbook pro to panasonic tv with hdmi cable

    How to connect macbook pro to panasonic hd tv with hdmi cable

    Hi m,
    It depends which MPB you have and the inputs on the TV. The following assumes your TV has an HDMI input which will work with a computer.
    This is if your MBP is from April 2010 or newer:
    http://support.apple.com/kb/HT4241
    First connect the adapter to the MBP and the HDMI cable from the adapter to the TV, then go to System Preferences > Sound > Output > select HDMI.
    Or if your MBP is older than that and you have a Mini DisplayPort, you can use something like this: http://eshop.macsales.com/item/NewerTech/CBLMDPHDMID/
    If it's older than that, for video you need a DVI or mini DVI to HDMI or whatever input your TV has. For audio, you need a 3.5mm stereo mini plug to RCA or optical (Toslink), depending on what audio input your TV has.

  • No sound when I connect my Macbook pro (2012) to TV via HDMI!

    Hi! I have a problem with the sound when I connect my Macbook pro (bought in 2012) to a Phillips HD TV. The strange thing is that it only happens with some videos (specially youtube videos) but the sound works perfectly with films and audio files I have in my computer, and also when I watch TV online (Eurosport player for instance and other similar applications). It's even stranger because it doesn't happen all the time; last week I tried many times to watch some youtube videos and after unplugging the HDMI cable it seemed to work. As I said, with Eurosport player and many films downloaded in my macbook I don't have this problem (sound is ok all the time), and this is why I'm really confused. I suppose it's not a connection problem, otherwise I wouldn't have sound in any video, right? I've tried two different HDMI's cables but nothing has changed. Please, someone help me, as I can't figure out what's happening. Thank you very much!

    Well Im not sure what the fix is for your problem, but can you please open up the sound preference next time you connect the philips tv, and make sure that sound output is set to hdmi out. Then try and play your video's etc and see if they are affected. 
    I can tell you I get a similar problem when, for example, I have a youtube window open and then connect the external display. The youtube video will not sound out through the cable, however if i refresh the window it works. Also the same when I use bluray player on mac, I have to close it and open it again for the sound to output through the external monitor.

  • MacBook Pro - connect to TV via HDMI Mini Display adaptor

    Can't connect macbook pro to my TV and view/listen to what's on my mac on the tv. I am using an HDMI cable from the tv to a mini display port HDMI adaptor. When I go to system preference, display it doesn't have an Arrangement tab to mirror. It only gives me tabs for Display and Color. Any help would b appreciated.

    Hello pdr4d,
    Based on your post it seems you are unable to get video on an external display. The following article may help you find a solution:
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    Check connections
    When using an external display be sure to check the following:
    If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
    Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
    Monitor and Display Adapter Table
    About Mini DisplayPort to HDMI adapters
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    Thunderbolt ports and displays: Frequently asked questions (FAQ)
    Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
    Try unplugging the video adapter or cable and then plug it back in.
    If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
    Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
    If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • MacBook Pro Connect to TV via HDMI with Toslink...???

    So I have a MacBook Pro (Mid 2009) and using a Mini-DisplayPort to HDMI will not give any audio. Only MBP (Mid-2010) I did sum research and found this video: http://www.youtube.com/watch?v=STx9PN7TPoc&feature=related which connects a Audio using a Mini Toslink to Toshlink adapter which is connecting that to a AMP. My question is: If i connect the Toslink to my TV (since I don't have a Amp) Will it still give out audio? I'm a little confused. Any help anyone...??

    To Csound's good advice, let me just add that there may be a specific HDMI port on the TV that you must use if you're going to send audio to the TV separately. This should also be explained in the TV's manual.

  • Macbook pro early 2011 sound via HDMI.

    Hi,
    I own a Macbook pro 13 inch (early 2011) and a liftrons mini display port to HDMI adapter.
    If I connect my macbook to my philips tv it works fine.
    And if I'm watching a photo slideshow using Iphoto I also hear the sound on the tv.
    But when i'm watching a movie using VLC I only get the sound through my macbook speakers.
    Does someone know how to fix this?
    I tried changing the sound settings on my macbook, but nothing works.
    Thanks!

    That sounds like an issue you need to bring up with the VideoLAN group who works on VLC.  Possibly, you might want to go to VLC Preferences and disable Audio, and let the Mac control it, but I'm not sure. 

  • MacBook Pro Retina to TV via HDMI

    So, I have my MBP Retina and I would like to connect it to my television via HDMI. I have my Mac connected to my TV via HDMI, and it shows the picture, but there is no sound! How do I fix this?!?!?!?!?!?! I need help ASAP!!!!
    Thanks, Kynan

    Don't worry! I just figured it out! I just had to go under system prefernces and go under sound and go under the output tab and click on the tv!
    Thanks for you help anyway!

  • How to connect an early 2009 MacBook Pro to a TV via HDMI

    I have the cables and adapter but am only getting one image when all is hooked up.......what else need I do?
    I've seen youtube instructions but I seem to lack the "arrangement menu under the "displays" preference.......
    Is this MacBook unable to run to a TV with HDMI plug?

    Hi mate,
    Two options - either turn on mirroring in the Displays Preference panel, or have a look at the arrangement section of that panel, you should see the second monitor positioned in relation to the laptop monitor - it's "extending" the desktop - move a window from your main monitor towards the second monitor's relative location as shown and you should see it appear on your TV.
    If you start your movie (DVD player or whatever) in window mode, move the window to the second monitor, then make it fullscreen - it should fill your TV and play there. You may need to muck around with the aspect ratio (16:9, 16:10 or 4.3 depending on your source) to get it right on the second display. VLC does this nicely especially if your source was converted incorrectly.
    Also tick the box to display the monitor settings in your menu bar - it's handy IMO.
    hth
    Papa

  • Want to connect MacBook Pro to the internet via ethernet cable for the first time?

    I Plugg the cable for Ethernet> Then I type my IP adress> don't know what to type in these blanks:
    Subnet Mask, Router
    What DNS?
    I want to plug the cable for Ethernet then see the internet work?
    =

    We cannot answer your questions.. and the method looks wrong.. why are you doing it manually.. just use dhcp and see if it works.
    There is hardly a modem or router out there that doesn't have dhcp setup for automatic setups.
    If it is manual then there is no way we can give you the values..
    They are determined 100% by the network you plug the computer into.. and the setting of that network.
    Tell us more if you supply modem router.. and ISP info and why it is not working with dhcp we might be able to help further.

  • I am trying to hook my macbook pro to a projector, which has a VGA cable. I bought a VGA to HDMI adapter, but whenever I hook it up, the screen on my macbook just goes black and I can't make it do anything else or even show up on the projector.

    I am trying to hook my macbook pro to a projector, which has a VGA cable. I bought a VGA to HDMI adapter, but whenever I hook it up, the screen on my macbook just goes black and I can't make it do anything else or even show up on the projector.
    My laptop is still on; it just has a black screen that I can't get rid of without shutting down the computer by holding the power button.

    Hey there lynmrigg,
    It sounds like have an HDMI to VGA adapter connecting your MacBook Pro and your projector but the screen on your computer goes black and no image appears on the projector. I would use the troubleshooting in the following article to help resolve or isolate the issue here, named:
    Apple computers: Troubleshooting issues with video on internal or external displays
    Try unplugging the video adapter or cable and then plug it back in.
    If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
    Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
    If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • I have connected my macbook pro to my tv via MDP to HDMI port cable, all that is showing up is the basic desktop image without any icons, what do i do to correct this

    i have connected my macbook pro to my tv via MDP to HDMI port cable, all that is showing up is the basic desktop image without any icons, what do i do to correct this

    Your MBP is running in "extended desktop" mode, where the two screens together make one larger area to display windows. You can drag one or more windows from the primary (internal) screen to the secondary (TV) screen. By default, the secondary screen is off to the right of the primary screen.
    If you would prefer the two screens show the same image, you want to switch to "mirroring" mode. You will have to pick a single resolution for both screens, which may look poor on one or the other.
    Both the relative positions of the two screens in extended desktop mode and the switch to mirroring mode can be set in System Preferences > Displays > Arrangement.

  • Yoga2 Pro - how to use tablet as a projector connected with TV decoder via hdmi cable?

    Hi, My TV is broken and I would like to use my tablet as projector connected via HDMI cable from TV decoder to my tablet. What should I do? How to configure and which apllication I should use?

    You will need to choose the correct (Input) on the TV for the MacBook.....say your cable box is set to HDMI !.....and your MacBook is on HDMI 2.....you will need to select HDMI 2 from the TV's menu for the signal from the MacBook to show on the TV screen.......the selection choices are examples as I do not know exactly how you have things connected......

Maybe you are looking for