MacBook Pro to my iMac with the firewire it makes me enter the Key product code for Office:Mac2011
When I connect my MacBook Pro to my iMac with the firewire to use as a monitor it makes me enter the Key producy code for Office:Mac 2011 every time.
Then when I disconnect my MacBook I have to enter the product key again to use office on it???
Any ideas??
Post on the Office forums: http://answers.microsoft.com/en-us/mac
Similar Messages
-
Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas?Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas? -
I have a MacBook Pro (purchased in 2011) with OS X Lion 10.7.4. I'm using Microsoft Office 2011 and cannot open older PowerPoint Files (non .pptx). It will always open the same .pptx file and then the machine hangs up and just keeps spinning.
Thank you - that all makes sense. It is, indeed, exactly what I did when I upgraded.
I'm also writing this on the machine that crashed a few minutes ago (I posted the crash in another thread). I got back with a 'safe boot' - as I have done a few times before.
I've also de-installed little snitch (and then done a safe-boot & then re-boot ) since that seemed involved. I de-installed Adobe flash, since that seemed to be a problem - I then re-installed the later, apparently fixed, flash. The most recent crashes don't seeme to have a problem with flash any more.
I've posted the various ( generally different ) crashes. I also posted a summary of the similar lines that turn up in most of the crashes.
Unfortuantely, I'm actually trying to use the machine to meet some urgent deadlines and all this is not making it at all easy.
I had had great hopes for 10.7.2 - I thought that the crashes must be pretty common, so would have a common aetiology. There do seem to have been some fundamental changes to the file sytem and to the video interface (that seems to cause problems to brand new iMacs as well as to my 2009 iMac). -
How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant? The files show up on the new MacBook but cannot be opened. Thanks!
Get info then check permissions then add your curent user name (it was probably different on old Mac) and give your username full read/write permissions.
-
I set up a new router and the windows machines connect fine. My MacBook Pro does not. I go through the airport assistant and see the network yet when I enter the router WPA password I get a message back saying that the password is incorrect. And, it isn't! Very frustrating. What can I do as I had the same problem after I tried to reinstall my last router. Again, only on the Mac. Thanks!
If you kept the same Base Station name and network name, that can confuse Keychain Access. Either change the Base Station and network name, or open Keychain Access Utility and delete any reference to your Base Station and network name. Make sure you delete from the Login and System keychains.
-
Can i install the l os that came in my macbook pro onto an imac with tiger?
i jst bought my macbook pro and i love it but i also have an imac (the solid white one) and it still has tiger in it. is there a way i can install leopard in it?
Doing so is illegal. It violates the software license that forbids installing on more than one CPU at a time. For $29.00 you can buy a legal copy of Snow Leopard for your iMac provided it meets the hardware requirements:
Snow Leopard General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply.
Some features require Apple’s MobileMe service; fees and terms apply.
For $49.00 you can purchase the Family license - up to five users. For $169.00 you can purchase the Boxed Set that comes with Snow Leopard, Leopard, iLife '09, and iWork '09. -
My sound will only work when I plug in headphones in the jack. When I take them out, the volume button is on mute. When I go into the sound preference it says Digital Out for the output. Sometimes I get a red light when the headphone jack is at. I have tried blowing in it and have put the jack in and taken it out numerous times to see if it will reset. Nothing. Any suggestions on what to do next?
Go step by step and test.
1.Plug in and remove the headphone.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
2. Reset PRAM. http://support.apple.com/kb/PH14222
Do this twice
3. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for: "Resetting SMC on portables with a battery you should not remove on your own".
Best. -
How do I stream rhapsody from my MacBook Pro to my receiver with Airport Express?
How do I stream rhapsody from my MacBook Pro to my receiver with Airport Express?
You will need an application like Airfoil for Mac to be able to stream any audio files on your computer to the AirPort Express.
http://www.rogueamoeba.com/airfoil/mac/ -
How do i copy pictures from my macbook pro to my iMac?
I need to copy a file of photos from my macbook pro to my Imac -- help please!
Just make sure that they're both on the same network, and then go to System Preferences>Sharing and enable file sharing.
Clinton -
I have tried to turn off my modem and after that i turned on each machine individually it worked for a while giving my macbook pro and my Imac different IP address.. but the problem came back again and im here with 2 similar IP addresses on each machine and once that happen i lose the internet on both of them.. and I get an exclamation mark on my Airoport symbol.
how can i change my IP address and where can i get a new 1.. should i just make it up..??
TYsirioluce wrote:
I have tried to turn off my modem and after that i turned on each machine individually it worked for a while giving my macbook pro and my Imac different IP address.. but the problem came back again and im here with 2 similar IP addresses on each machine and once that happen i lose the internet on both of them.. and I get an exclamation mark on my Airoport symbol.
how can i change my IP address and where can i get a new 1.. should i just make it up..??
TY
What router are you using? -
If I own a Macbook pro and an iMac can I have final cut pro downloaded to both with one purchase?
If I own a Macbook pro and an iMac can I have final cut pro downloaded to both with one purchase?
If you purchase Final Cut Pro X at the Mac App Store, you can install it in all your Macs free of charge as many times as you want. The same applies for all the applications you purchase at the Mac App Store
-
I'm using Preview with a MacBook Pro and MacOS 10.6.8. When adjusting sharpness in the Adjust Colour tool, images are not saved. Any hint? Thanks.
I too experienced the same issue. Here are my details:
Recently I bought a 15” Macbook Pro and last night I tried to connect and use a Edirol FA/66 Firewire 400 connected outboard audio interface using a Firewire 400 to 800 adapter then connected to a Firewire 800 to Thunderbolt adapter since the MBP doesn’t have a native Firewire port. What I observed is that the Edirol was not getting power from the bus nor did the MBP (running Yosemite) recognize the Edriol. At first I thought there was a problem with the Edirol since I haven’t used it in a while but when I connected it to an older MBP that has a native Firewire port, it worked normally. Is there a known issue with these sorts of external audio interfaces working properly with newer MBP running Yosemite? I’m hoping that a software update will fix this issue. -
Hi. I have a Macbook Pro Model 5,5 with one 800 firewire port. I need to create two firewire 800 ports but only have an SD card slot (this is for video interface with 2 cameras). Is this possible or do I have to have an express card slot in order to do this?
Hi Jessica,
No, the SD slot will not work, you need an ExpressCard/34 slot.
I do not know if it works with cameras, but with two or more HDs, if the first one has two FW ports, you can "daisy chain" one or more additional HDs from it. -
I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen. Does anyone have any suggestions?
Irelandbound wrote:
thank you, I have the adaptors so glad that would work. I just heard adaptors burn out often. So Just thought for my main iMac computer, a plug would be best. I will get one once I move.
Any other suggestions or things I should know about apple products in Ireland. I know there are no Apple stores there.
An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
If you have something that doesn't have that input power spec, it would require a transformer.
On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out. -
I have moved everything from my macbook pro onto my iMac. For some reason I cant see any of my music in iTunes even though I have logged in with my normal apple ID. Please help me before I kill something!!
How did you go about transferring your library onto the iMac? There are specific instructions one must follow to do this correctly without causing loss of data. Simply signing in via your Apple ID won't do much of anything unless you are an iTunes Match subscriber.
Did you just copy the entire iTunes folder over? If so, Quit iTunes then hold down option and click the iTunes icon in the Dock. Don't release option until the popup appears asking if you want to create a new library. Simply navigate to the library in the folder you copied over.
If you didn't go about transferring your library in that way, and you still have the MacBook Pro, follow these instructions to transfer your library properly to avoid data loss.
Hope that helps!
Maybe you are looking for
-
Keyboard, trackpad stops working after unfolding
I got a brand new Macbook Air the other week. I noticed that sometimes, after folding the computer (with the OS running), then unfolding it - the keyboard and trackpad are not responding at the login screen. Actually if I press the keyboard it lights
-
Issues with using relative links in Captivate 8
Is anyone else having issues with using relative links in Captivate 8? These links all used to work in the previous version of Captivate. And I could have sworn this was fixed already once in Captivate 8 but it's popping up again for us. Here is the
-
Cisco ISE trying to posture a device that should not be able to be postured
Overview: Cisco ISE version 1.1.4. Windows PC will be postured using Web NAC agent. Mobile devices (Apple/Android) can't be postured and will be exempted from posturing. Mobile devices will be exempted using the condition EndPoints:PostureApplicable
-
Dear experts, We are running CPS build M33.10-45085 on NW7.1 We are preparing an upgrade to NW7.31 Now, I really cannot find information on which version of CPS I should run. Should we upgrade CPS? Will CPS build M33.10-45085 run with NW7.31? to whic
-
Hi all, I have an issue relating to with holding tax. wtax code is not picking the percentage ammount while doing the transaction.Please provide the solution. Regards, Suma.