Macbook Pro trackpad partly stops working after 1 touch

I have a very strange problem with the trackpad on my macbook pro (late 2008, fully updated, SSD, 4Gb).
When a mouse is used all is fine. WHen I touch the trackpad ONCE, it will stop working correctly, it will:
- not detect a single click
- will detect a doucle click
- mouse moving (one or two fingers) no problem
IF the SMC is reset (unplug/remove battery/hold power button 5 sec/put battery back/ plug in power/start up)
all is ok, BUT after 1 time use the trackpad the same appears.....
I have sofar tried:
- SMC (described)
- PRAM reset
- disk utility (recover/fault detect)
- restore from time machine
- Yasu
nothing new is configured, the only thing i can imagine is that I moved the mac, while it was running, from its place and walked away from the place were the connected bluetooth mouse was located.....
anyone any clue?

Tx Ogelthorp,
But this did not work; one strange observation:
While not touching the trackpad from start after reset it works with a seperate mouse as it should.
Then one touch on the trackpad and it is ignoring the single click BUT SO IS THE MOUSE?
so no hardware fault I guess as it is exactly repeatable...
any other ideas?
gr/d

Similar Messages

  • Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.

    My Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.. I wonder what's the work around or troubleshooting to fix this. Thanks!

    try and Reset the System Management Controller (SMC)

  • Macbook pro optical drive stopped working after installation of mavericks

    macbook pro optical drive stopped working, just spins and won't eject, ever since I upgraded to Mavericks, thoughts?

    I have the same problem and was advised by someone to reset System Management Controller (SMC). I haven't tried it yet though. I wish it could fix it. Let's give it a shot!

  • Trackpad Gestures stop working after screen sleep on OS 10.9.2 update

    Trackpad Gestures stop working after screen sleep after OS 10.9.2 update.  Anybody know why?  Is there a process I can stop or reboot in the Activity monitor to refresh this?  These gestures include launch pad, mission control and full screen swipes.  Annoying.

    Same problem same version. On a MB Air. I have every gesture turned on. When this happens I have same problem on Magic Trackpad and my MB Trackpad. If I quit the app part of the gestures come back but then stop again. The worst is scrolling. This one is a show stopper and always require quit and relaunch.

  • My MacBook Pro speakers are stopped working and on screen volume icon shows in gray colour I am unable to change the volume.

    My MacBook Pro speakers are stopped working and on screen volume icon shows in gray colour I am unable to change the volume.

    Go step by step and test.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers.
        Make sure that Mute is not enabled.
    2.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
        Try this even if you don’t see the red light.
    3. Reset PRAM.  http://support.apple.com/kb/PH14222
        Do this twice
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the appropriate method.
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so,uncheck it.
    6. System Preferences > Sound> Sound Effects
        Play sound effects through:
       Select "Internal speakers" and then back to "Selected sound output device".

  • Hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

    hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

    hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

  • Firefox 4 doesn't allow MacBook Pro Trackpad features to work, for eg. zooming in and out by "pinching"

    I downloaded Firefox 4 and immediately noticed I could not zoom in and out by using the two finger "pinch" action used on MacBook Pro trackpads.
    I reverted to Firefox 3.6 and it works just fine.
    Could you please advise me how to rectify the fault on Firefox 4
    Thank you

    Some gestures have been removed in Firefox 4.
    You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
    browser.gesture.pinch.in cmd_fullZoomReduce
    browser.gesture.pinch.in.shift cmd_fullZoomReset
    browser.gesture.pinch.out cmd_fullZoomEnlarge
    browser.gesture.pinch.out.shift cmd_fullZoomReset

  • Macbook Pro trackpad and keyboard freezes after attempting sleep mode

    I bought this computer on April 2008. It has the latest OS X 10.5.6 and it did not accept the trackpad firmware. I tried to install and the software said "this computer does not need this update".
    This has been happening a lot when I am using Skype while talking to someone with video and sound. The computer tries to go on sleep mode because I am not typing or touching it - it thinks I am away because I am just talking and watching the person on the other side.
    I touch the computer to avoid getting on sleep mode and with that it freezes the trackpad and keyboard. I continue to listen and see the other person and they continue to see me and hear me, but I cannot move the "mouse" cursor on the screen or type anything. Neither can I force to quit anything. The only thing that works is to close the computer and open again, that forces the computer to go into sleep mode then I can make it wake up again by opening it and touching any key on the keyboard.
    This have been interrupting Skype calls and a study I am conduting. I have to keep touching the computer trackpad to not let it sleep ever. I am concerned is something with the battery or maybe it needs some kind of firmware.
    This is very recent, just started happening this week (March 2009). I have not added any new software or any hardware to the machine.
    What can I do to make the trackpad and keyboard stop freezing when the computer tries to sleep?

    this is in the wrong category. I added a new message to the right category: MacBook Pro but I don't know how to delete it from here.

  • My MacBook Pro mid 2012 stopped working completely.

    It was fully charged, and I was on battery, and all of a sudden it stopped working. The display went black, and powering on doesn't work. LEDs don't light up after pressing the charge indicator button even though I am sure it is (almost) fully charged.
    I tried connecting the power adaptor and the green LED doesn't glow. There seems to be some problem with my MacBook since my charger is working fine with other MacBooks of my friends.
    Connecting another working adapter, and powering on didn't work either. It has been 7 months since I brought my MacBook, and I am running Mavericks. I have contacted the support, but they say I have to take it to the store.
    Unfortunately, there are no Apple stores nearby my current location, and nearby ones are like 5 hours away from here.
    So, I wanted to ask - Am I missing something? Is there something I can try now?

    Hello Bharadwaj6,
    Try resetting SMC by following the below Method.
    Resetting the SMC on portables with a battery you should not remove on your own
    Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    http://support.apple.com/kb/ht3964

  • Whenever I FaceTime on my new MacBook Air, the microphone stops working after a little while, how can I fix this?

    I recently got a refurbished MacBook Air from Apple. Whenever I FaceTime, my microphone stops working, and the person on the other end can't hear me. I end up having to FaceTime them on my iPod Touch, which can be a bit frustrating. Are there any solustions to this?

    Why does that seem likely to be a hardware issue? How did you come to that conclusion? Do you know something about this issue that indicates that? (I realise that this might sound short and rude - I am not trying to be rude here - just to understand) My thought is that conventional troubleshooting would say that this is a software issue because it is fixed with a restart.
    I also have this problem. The camera quits working after some time - I have not been able to make it stop working. Sometimes it is after I suspend the computer (close the lid) other times it still works.
    All I know is that intermittently my camera stops working and it is a big pain to have to reboot whenever I am going have a video chat.
    Anyone got any solutions, I'm not covered by applecare so would rather try and fix it myself if possible?

  • My MacBook Pro trackpad is not working

    My Macbook Pro was purchased in September 2009. The trackpad is not responding to clicks on the computer. The cursor is present and you can click the trackpad just fine, but it will not select what I click. It's very frustrating. It worked fine, but then all of a sudden it isn't. Help me with this issue please ASAP!

    My Macbook Pro was purchased in September 2009. The trackpad is not responding to clicks on the computer. The cursor is present and you can click the trackpad just fine, but it will not select what I click. It's very frustrating. It worked fine, but then all of a sudden it isn't. Help me with this issue please ASAP!

  • MacBook Pro Charger - Intermittantly Stops Working

    Hi All,
    I have had my macbook pro now for just over a year and unlucky for me im 20 days out of my 1 year warrenty and now not entitle to upgrade to apple care because of this when i phoned techincal support
    The macbook pro charger is working intermittantly so it isnt completely dead.
    if i wiggle it around or sit the cables just right it will work but it isnt working 1005 off the time like it used to.
    I have a 2010 macbook pro with the L shape charger. I have manager to get another old style T shape charger off my friend which works perfectly with my macbook pro but will this harm my battery life because im using an "older" charger? but its brand new. also do you think its worth going into my local apple store in milton keynes to see if they can help me at all? as my gripe is you pay £1000 for a laptop and one year on the charger brakes. And i do look after my equipment. Its not like i throw it about or mistreat it.
    I think it could of happened early if i used it more.
    Is this a common fault?
    Thanks
    Daniel

    If you have bought AppleCare Extended Warranty, MBP is in warranty for 3years
    from the date of purchase.
    Best thing to do, is to take the MBP to the Apple store for evaluation and possible repair / replacement.
    Try Reset SMC.  http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • The Logic Board of my MacBook Pro Retina Display stopped working.

    I purchased my MacBook Pro Retina Display 13 months ago. Barring a few errors the computer functioned beautifully, and I maintained it with the care it deserved. On Wednesday, last week, the laptop ceased to work completely. It wouldn't start, or charge. On submitting it for repair, I was informed that the logic board failed. Since its warranty lapsed a month ago, $1050 is required for its replacement. That outrageous amount is more than half of what I paid initially for the laptop. The service provider would not agree to any concession, or plea.
    For an Apple enthusiast, it is very disheartening to learn that its foremost product stops operating in this manner. I am a high school senior, who has accustomed himself to his computer, and cannot at this time purchase a new laptop, let alone a Windows laptop. With college admission deadlines fast approaching, I solicit your help and suggestions, very desparately.

    As much as it will suck to hear this answer, there really is no solution. Because the computer is now out of warranty, you have to pay the full $1050 to get the logic board replaced. I know this is a large sum of money, but you have to remember that the logic board includes the CPU, Graphics Card and RAM, all soldered onto the board. You're paying to replace all of the most expensive components of your computer, even if only one of them failed.
    So, long story short, you'll have to either pay to replace the logic board, because it's out of warranty, or buy a new computer.

  • Macbook Pro trackpad doesn't work on word

    My macbook pro mouse trackpad isn't working while I'm on microsoft word. It works on other application like safari but refuses to work on word. It still clicks and i can use the sidebar to move up and down pages but i am unable to slide down the page using two fingers.

    Hello jwilliams112,
    Welcome to the Apple Support Communities!
    I understand that your trackpad is not functioning as you would expect only while using Microsoft Word on your MacBook Pro. In this situation, I would suggest reading over and working through the If the issue occurs in one application only section in the attached article for troubleshooting information.
    Mac OS X: How to troubleshoot a software issue - Apple Support
    Have a great day,
    Joe

  • MacBook Pro Right Speaker Stopped Working

    Hi,
    I've had a 15.4" 2.4 Ghz MacBook Pro for about three weeks now, and I've been loving it. Everything's great, especially after switching from a 3.5 year old dell. About 3 days ago though, I was listening to music, and paused it when I went to grab a snack. I came back about 10 min. later and found that my right speaker was not working. No sound whatsoever. My left speaker is perfectly fine, no problems with that. I tested everything. I played with speaker balance, I changed and unchanged audio midi setup preferences, restarted, everything. Once when I restarted the speakers were fine, even the right one. But when I started playing music, I heard the right speaker die. I don't know what's wrong.
    I plan on taking it to the Apple Store, but I just want to know whether something like this has happened to anyone else, and whether there's some sort of solution to this.
    I have the AppleCare Protection plan, and am still under the 90 day warranty, so I think I should be fine. Thanks!

    An intermittent problem like this sounds like a hardware failure to me. Could be a loose wire inside or a poor solder joint. Either way, taking it in to Apple is the right call.

Maybe you are looking for

  • Soa suite 10.1.3.4 patch installation problem

    Hi, As a preinstallation task, when I tried to run the script upgrade_10133_10134_olite.sql on olite database, it is giving me the following error... SQL> SET FEEDBACK 1 SQL> SET NUMWIDTH 10 SQL> SET LINESIZE 80 SQL> SET TRIMSPOOL ON SQL> SET TAB OFF

  • IPhoto '09 albums don't show up in the screen saver preferences

    I just realised that most of my iPhoto '09 albums don't show up in the screen saver preferences... How can I make them visible again?

  • Anyone solved the blinking statusleds on 1252

    Hi, have anyone solved the blinking statuslights on the 1252? -it always blinks status blinks red,green,blue when on 15,4w, 802.3af compliant switch! Im now running the 1252 lightweight on controller 4402 with firmware 6.0.182.0, i have administrativ

  • Error (Critical errors were found )

    Critical errors were found in setup. Please see the setup log for details for cs4

  • Multiple runtime configurations

    Hi, I'd like to set up multiple runtime configurations on a project. i.e. I want to be able to run the same java class with multiple program arguments or virtual machines. Is there any way I can do this without creating a separate project or using <t