Macbook Pro Trackpad wrongly left clicks

When I click on the bottom right part of my trackpad it will left click instead of doing a normal right click. I think it has something to do with the fact that that part of the trackpad is used the most. It does not do this on any other part of the trackpad. Anyone have any ideas on a way to remedy this problem?

Go to System Preferences > Trackpad, select the Point & Click tab and set Secondary Click to something else, or turn it off.

Similar Messages

Help! My MacBook Pro trackpad doesn't click anymore.

It's been fine for the last almost 2 years.
I bought in in late September, early October of 2009.
I take phenonmenal care of my MacBook Pro... other than some dings here and there from taking it out of my laptop bag.
It was fine on Friday, and for most of Saturday.
On Saturday, at nightime, it began to not drag things properly sometimes... but after a restart of my computer it was fine.
On Sunday night, I lost a lot of function on my trackpad. It didn't click on the bottom left corner and couldn't drag well on the left side but the right half of the trackpad was working perfectly fine.
THEN... on Monday night (pretty much today)... I was doing a project and then suddenly clicking became difficult. Then... clicking ceased to function at all except occasionaly at the bottom middle.. or right on the edge of the right side.
I tapped on the trackpad a few times and it seemed to restore a bit of function.
Then I tapped some more and now it ceases to work for clicking at all.
I can still scroll, and move the cursor around... but I can't click.
I hate using external mice because it feels like there's a lack of control as opposed to using your fingertips.
Please help me! I don't have enough money for a new computer! I'm a student!
Thank you so much in advance.

Try SMC reset
http://support.apple.com/kb/ht3964
then clean your trackpad with a damp cloth, Keep rubbing the trackpad for about two minutes.

Macbook pro trackpad won't click. What can I do?

About 3 months ago, my trackpad on my Macbook Pro 2009 lost the ability to click. I could not physically press it down. Then about 1 month ago, it was being very funky and acting erratic, so I took it into the apple store and they told me I needed to replace the trackpad. Rather than paying the $100 for them to do it, I ordered the parts online and replaced it myself. The trackpad is no longer erratic and works great that way, but I am still unable to click. I adjusted the small screw under the trackpad to make it very loose, but it still will not push down. Any suggestions or tips on what I can do to trouble shoot or solve this problem?

Tried resetting PRAM and SMC?
Reset PRAM. http://support.apple.com/kb/PH4405
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
System Preferences > Trackpad > Tap to click
Uncheck and recheck the box beside.
Battery works fine?
Best.

Macbook pro trackpad won't click in lion boot / recovery screen, anyone has a solution?

anyone has a fix?
like patched trackpad kext?
It's a behaviour I observed only in Lion, therefore I was a bit confused in which forum I should post it,
I believe it's a major problem,
you can't select users with trackpad (click or tap won't work the same)
but worse you are in a awkward situations trying to make a recovery boot and finding you can't click anything....
please, mr. jobs!
whip your programmers to patch it asap!
MBP mid 2009,
lion 10.7.0 or 10.7.1
thank you
tomaso

Try a Safe Mode startup and see if it works ok while in that mode. Hold down the Shift key before the startup chime. Will take awhile longer to finish startup. Will only load Apple system extensions while in this mode. http://support.apple.com/kb/HT1564
If it works ok in Safe, means you have installed some third-party software interfering with the trackpad. You'll have to do some sleuthing to determine which.

HT203146 My Macbook Pro trackpad is unresponsive. Are there key commands which I can use to open my computer?

Macbook Pro trackpad will not click so I am unable to log in. Are there any suggestions to fix this? Can I use keystrokes to log in and potentially solve the problem?

Try SMC and NVRAM resets:
http://support.apple.com/en-us/HT201295
http://support.apple.com/en-us/HT204063
Then try a Safe boot:
http://support.apple.com/en-us/HT201262
Ciao.

Macbook Pro Trackpad Left Click Hold

Hello everyone, My MacBook Pro, after doing something to my trackpad my left click is held. This usually happens when I play minecraft and my left click is held. Does anyone know how this happens?
Thanks

Update on the situation:
1) Reboot in Safe Mode (shift-key down at start-up) -- secondary click still shows the application switcher.
2) Ran Onyx -- Execute the defaults (no others) in the Automation tab and after rebooting the issue still persists.
3) I removed the Microsoft drivers from my system and all plist files -- and reinstalled the MS drivers. On first use of the right-button on the mouse, I got the same "secondary click" response that I get with the trackpad. Before the uninstall it had worked correctly. I remember looking at the MS Mouse config options and it showed the right button performing a control-click. Now, with the preferences at their defaults from the software removal and reinstallation, I see there is an option -- and it is the default option, that the right-mouse button performs a "secondary click".
So it isn't a trackpad or mouse issue, it is an issue that somehow the default system behavior for a secondary click has been changed from displaying the alternate menu to showing the application switcher.
So the question is, what application or utility changed that? I was evaluating the Apple Mighty Mouse a few months ago and decided against it -- the right sensor seemed to fail often. Did that have an option to modify the secondary-click? I have Google and searched for tersm like ["secondary click" setting change modification hack, etc] and haven't seen any mention of that ability -- but clearly on my machine under my main user account, this is happening.
I hope that helps get one step closer.
Thanks in advance.
MacBook Pro Core 2 Duo 15" 2.33 GHz Mac OS X (10.4.8)

MacBook Pro trackpad constantly clicking

I have a late 2008 Macbook Pro 5,1 15' 2.53 GHZ-4GB Ram. Running Mac OS X Lion 10.7.4 (11E53)
My Macbook Pro trackpad is stuck constantly left clicking
some right clicking
moving around by itself
not always responding completely to touch.
In text boxes when typing it constantly erases text
Pretty much unusable when this is happening.
It will happen as long as it wants to and start working normally again with no rhyme or reason I do not see anything in particular that seems to trigger it.I did not just start this thread without searching the net and here. I am just looking for some opinions on if I should take it in for repair or if there are any other things I can try that I may have missed.
Here is a list of what I have tried so far.
Reset PRAM and NVRAM.
Checked battery for bloating (even though that would not cause this problem would only cause it to stick had to replace once already).
Booted into safe mode (logged into seperate admin account I never use problem started again in safe mode after about 30 seconds of using trackpad).
checked trackpad screw (was fine but tried loosening it and tightening slightly to see if it helps.
Turn off, Remove battery, hold power for 5 seconds, replace battery and boot.
Using external mouse exhibits the same behavior (tried both USB and different wireless mice) This makes this problem seem more likely software not hardware
One thing I have not tried is deleteing the plist files for the trackpad I read that fix somewhere although I can not find the link now. If and when it decides to stop again I will try that next. I am A+ certified not ACMT but I can replace anything on it if needed so please mention anything you can think of even hardware. I would rather not restore the OS as I have about 300GB of data and transferring it to one of my servers or external drive would be a pain, time consuming, and I have read it does not solve these types of issues.
Please help
Sincerely,
Frustrated but still happy Apple user.

Well after some further investigation it seems I may have had some malware. I receive a lot of packages and this one seem to have slipped by my spam filter. It's called Mal/JSRedir-J of course I also forgot to re install Sophos Antivirus after I did some software development work and was running strictly through my citrix server which is very secure. *Slaps self in face*.
I am running a thorough scan now but that trojan popped up. I was able to install Sophos after a reboot before it started acting up barely got my password in on install before cursor started flying around the screen.
So far so good. Hopefully it stays that way, and maybe this will help someone else. Virus is not always the first thing to come to mind when I think MAC, and this is my first infection in 4 years

On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work. I have to click on some other part of the screen and then it will. This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?

On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work. I have to click on some other part of the screen and then it will. This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?

Start up in Safe Mode.
http://support.apple.com/kb/PH4373

Firefox 4 doesn't allow MacBook Pro Trackpad features to work, for eg. zooming in and out by "pinching"

I downloaded Firefox 4 and immediately noticed I could not zoom in and out by using the two finger "pinch" action used on MacBook Pro trackpads.
I reverted to Firefox 3.6 and it works just fine.
Could you please advise me how to rectify the fault on Firefox 4
Thank you

Some gestures have been removed in Firefox 4.
You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
browser.gesture.pinch.in cmd_fullZoomReduce
browser.gesture.pinch.in.shift cmd_fullZoomReset
browser.gesture.pinch.out cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift cmd_fullZoomReset

Lightroom 5. I've reinstalled it on a macbook pro but when I click "Develop" it states the module is disabled and I need to purchase a licence but I've got a full licence and it's running on another machine. How do I fix it?

Lightroom 5. I've reinstalled it on a macbook pro but when I click "Develop" it states the module is disabled and I need to purchase a licence but I've got a full licence and it's running on another machine. How do I fix it?

Lightroom doesn't launch or returns "Develop module is disabled" error after 5.5 update

MacBook Pro Trackpad: Clicking problems

I have a MacBook Pro, (15 inch, Late 2008) and have always had fairly significant issues with the trackpad. It only registers clicks about half of the time. I have experimented with all the trackpad settings and "tap to click" also fails to register consistently. I usually have to press very hard, after the trackpad depresses for the click to register in the OS. I've continually experienced this problem in Leopard, Snow Leopard, and now Lion.
I've read that a lot of other people have had similiar issues with their trackpads over the last 3 years, but I've never heard about any fix or remedy. My trackpad does depress just fine, so I don't think that the trackpad screw would need to be adjusted at all. An external mouse registers clicks 100% of the time, so it isn't a software issue. I've heard that some people's ribbon that connects the trackpad could be loose, but I'm nervous to open it up and mess around with it.
I click with the side of my thumb--as most other people do. However clicking with my index finger also fails to register clicks, so I don't think it is a "accidental input" issue or a multitouch issue.
My girlfriend has the exact same model of Macbook Pro. Same year, same season, exact same specs. Her trackpad works perfectly.
I brought the computer to a Genius Bar, and the "Genius" said that it was just fine and somehow magically got it to register his clicks. I think maybe he had a sercret Magic Mouse under the table. I left bewildered and defeated.
Maybe I should just navigate via keyboard...

Don't worry about what the 'Genius' had to say most are just Apple grunts, slugging it out in the trenches.
If you are out of warranty / AppleCare then I would suggest finding an authorized independent Apple repair company. Go there, get a ridiculous quote (most likely) then ask around and find a local computer repair shop. Any place with "Apple Authorized" is basically like dealing with Apple.
You could also ask another 'Genius' or a 'Super Genius' (ie Manager.)
I promise you are not alone.
I have killed keyboards and trackpads with the following:
- A glass of Merlot.
- A glass of water
- Another glass of water
- A dog, knocking the laptop off the couch and to the floor.
I could continue, but seriously. Don't get up. The other option is to get a bluetooth mouse. Personally I love mine.

Is it better to press click the new Macbook Pro trackpads near the bottom?

It feels easier to push down to click at the bottom of the trackpad, and seems to get harder the further you go towards the top. Is this normal?

ah818 wrote:
i just bought my macbook pro and im wondering.. when you push on the left side part of the bottom shell, is it suppose to make a cracking sound a little?
I would say no to your question. The bottoms are secured by mulitple screws and there are also a couple of areas on the bottom tray that "snap" into the upper unibody. Maybe try removing the bottom tray and reinstalling. It could just be that one of the areas that is susposed to snap into place did not do so during the original install.
There is some "flex" to the lower tray in the more central areas and if you press on it there is a little bit of movement in some areas where there is nothing directly over the tray but mine does not make any kind of "cracking" noises and is very solidly in place with no give or flex near the edges.

MacBook Pro Trackpad Secondary Click not working properly - switching apps

I have a MacBook Pro 15" (new Core 2 Duo) with 10.4.8. On my main account, when I try and use the trackpad's two-finger-click to perform the secondary click functionality, I have a problem where instead of showing the secondary menu (same as control-click) it instead shows me the application switch screen (same as you see when entering command-tab).
I logged in under a new user account and enabled secondary click and it works properly -- so this appears to be either a conflict/issue in a plist (though I deleted the plist for mouse and keyboard and the issue still remains) or possibly with some other application/utility that is installed.
Without recreating my world one-by-one, any thoughts, ideas, or suggestions?
Thanks in advance,
Brian
MacBook Pro Core 2 Duo 15" 2.33 GHz Mac OS X (10.4.8) Using SOHO Notes, Yojimbo, StuffIt, and QuickSilver

Update on the situation:
1) Reboot in Safe Mode (shift-key down at start-up) -- secondary click still shows the application switcher.
2) Ran Onyx -- Execute the defaults (no others) in the Automation tab and after rebooting the issue still persists.
3) I removed the Microsoft drivers from my system and all plist files -- and reinstalled the MS drivers. On first use of the right-button on the mouse, I got the same "secondary click" response that I get with the trackpad. Before the uninstall it had worked correctly. I remember looking at the MS Mouse config options and it showed the right button performing a control-click. Now, with the preferences at their defaults from the software removal and reinstallation, I see there is an option -- and it is the default option, that the right-mouse button performs a "secondary click".
So it isn't a trackpad or mouse issue, it is an issue that somehow the default system behavior for a secondary click has been changed from displaying the alternate menu to showing the application switcher.
So the question is, what application or utility changed that? I was evaluating the Apple Mighty Mouse a few months ago and decided against it -- the right sensor seemed to fail often. Did that have an option to modify the secondary-click? I have Google and searched for tersm like ["secondary click" setting change modification hack, etc] and haven't seen any mention of that ability -- but clearly on my machine under my main user account, this is happening.
I hope that helps get one step closer.
Thanks in advance.
MacBook Pro Core 2 Duo 15" 2.33 GHz Mac OS X (10.4.8)

Macbook Pro trackpad taps but doesn't click.

I have a 2009 macbook pro and the trackpad taps but doesn't click. I was wondering if something can be done to fix it so the click works again without taking it in to get fixed? I am currently using a wireless mouse, which is okay but just gets annoying to use sometimes. But if anyone knows of any tricks that might make the click on the trackpad work, that would awesome!

There are no stickers involved in determining a warranty. Check here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Even if your warranty has expired, the examination at an Apple store genius bar is free. If repairs are needed you will be informed of the costs. A trackpad repair/replacement should not bust the bank account.
Ciao.

Macbook pro trackpad click right open window

Hi
its secont time to hapent to me
the first to install again lion but now is not regulare
my promblem is start first to try make PRAM to my macbook pro 2.66ghz early 2009 with apple genuine SSD
Boot in install Lion again!!!!
shoot down and strt again boot in OS an thw track pad make zoom in scroll and right click make windows open
the keyboard not work but i have sount from button and backlight keyboard button

Sounds like you may have an issue with a stuck key on your keyboard, or maybe you're inadvertently performing a multitouch gesture.
First thing I'd try, is going to the trackpad settings and turning off multitouch gestures, even if just temporarily. Do things work as expected with that disabled? If yes, look through the different gestures and try to figure out which one you must be triggering. If not, I'd take it back to wherever you had it repaired, and get them to take a look at it. It sounds a bit like the keyboard is sending a constant signal from the "Option" key.

Macbook Pro Trackpad wrongly left clicks

Similar Messages

Maybe you are looking for