MacBook Pro turns itself on every night at 8:00 p.m. EDT

I am getting freaked out! I am a new Mac user, and my factory new MacBook Pro will turn itself on (a full start, boot up) every night at 8:00 p.m. This is a cold boot up. The computer is not in sleep mode. Additionally, I have not done any auto wake or sleep commands. I have seen this issue mentioned by a few other folk, but I do not see Apple providing a response. It is creepy and it needs to be fixed. HELP.

There is nothing in preferences I have set to cause the computer to start up. It does not seem to do when it is not plugged into the ac adapter. It appears to happen only when the computer is hooked up to ac. I can always tell it has turned itself on, because the glow from the latch starts. I cannot take the computer back because it is past 14 days, and Apple Tech Support, when I called them about this, was useless. Since no one has been able to answer it in the forum, I can only suspect there is something wrong with the computer. Everything else with the computer seems to be fine. I just don't want my hardware to be working when I don't want it to work, and I have concerns about security. I have taken the AirPort offline when I log off, but given the computer turns itself on, I do not take comfort in supposing by turning off the function, the MB has actually followed the command. What else is the computer doing contrary to what I want it to do?

Similar Messages

  • Mac Pro turns itself on every day at the same time

    My Mac Pro suddenly decided to start turning itself on every day at 6:00:12pm local time (12:00:12AM GMT). It turns on at exactly 12 seconds after 6:00pm every day.
    I recently upgraded to OSX 10.5 and installed the point update. It did it before the point update and continues to after the point update.
    I have had it since April and it has never done this before. It did NOT do this under 10.4.
    I have the options in system settings to NOT wake on LAN event and NOT restart after power failure. It is NOT set to automatically turn on but it is set to automatically turn itself off at 1:00am.
    These settings have not changed since 10.4 and I have verified them. No other software has recently been installed since the update to 10.5. I did update the Wacom driver to the new Leopard driver. That is all. I have the Wacom tablet unplugged from the computer.
    Any ideas?
    Here is the console log from yesterday. It pretty much looks the same every day.
    Log file:
    Nov 18 18:00:12 localhost com.apple.launchctl.System[2]: kern.maxproc: 532 -> 512
    Nov 18 18:00:15 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
    Nov 18 18:00:15 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
    Nov 18 18:00:15 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
    Nov 18 18:00:16 localhost kernel[0]: npvhash=4095
    Nov 18 18:00:16 localhost DirectoryService[12]: Launched version 5.0 (v514)
    Nov 18 18:00:16 localhost kernel[0]: hi mem tramps at 0xffe00000
    Nov 18 18:00:16 localhost kernel[0]: PAE enabled
    Nov 18 18:00:16 localhost kextd[11]: 412 cached, 0 uncached personalities to catalog
    Nov 18 18:00:16 localhost kernel[0]: 64 bit mode enabled
    Nov 18 18:00:16 localhost kernel[0]: Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007; root:xnu-1228.0.2~1/RELEASE_I386
    Nov 18 18:00:16 localhost kernel[0]: standard timeslicing quantum is 10000 us
    Nov 18 18:00:16 localhost kernel[0]: vmpagebootstrap: 973126 free pages and 75450 wired pages
    Nov 18 18:00:16 localhost kernel[0]: migtable_maxdispl = 79
    Nov 18 18:00:16 localhost kernel[0]: 88 prelinked modules
    Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
    Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
    Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=2 LocalApicId=2 Enabled
    Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=3 LocalApicId=3 Enabled
    Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=4 LocalApicId=5 Enabled
    Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=5 LocalApicId=6 Enabled
    Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=6 LocalApicId=7 Enabled
    Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=7 LocalApicId=4 Enabled
    Nov 18 18:00:16 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
    Nov 18 18:00:16 localhost kernel[0]: calling mpopolicyinit for TMSafetyNet
    Nov 18 18:00:16 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    Nov 18 18:00:16 localhost mDNSResponder mDNSResponder-164 (Nov 4 2007 13:23:04)[16]: starting
    Nov 18 18:00:16 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
    Nov 18 18:00:16 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
    Nov 18 18:00:16 localhost kernel[0]: calling mpopolicyinit for mb
    Nov 18 18:00:17 localhost kernel[0]: Seatbelt MACF policy initialized
    Nov 18 18:00:17 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
    Nov 18 18:00:17 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    Nov 18 18:00:17 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    Nov 18 18:00:17 localhost kernel[0]: MAC Framework successfully initialized
    Nov 18 18:00:17 localhost kernel[0]: using 16384 buffer headers and 4096 cluster IO buffer headers
    Nov 18 18:00:17 localhost kernel[0]: devfsmakenode: not ready for devices!
    Nov 18 18:00:17 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    Nov 18 18:00:17 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
    Nov 18 18:00:17 localhost kernel[0]: mbinit: done
    Nov 18 18:00:17 localhost kernel[0]: Security auditing service present
    Nov 18 18:00:17 localhost kernel[0]: BSM auditing present
    Nov 18 18:00:17 localhost kernel[0]: rooting via boot-uuid from /chosen: A3FDED86-37C7-3DF1-9FCC-6C589DDC1077
    Nov 18 18:00:17 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Nov 18 18:00:17 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0 @0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/ST3500630AS P Media/IOGUIDPartitionScheme/Customer@2
    Nov 18 18:00:17 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
    Nov 18 18:00:17 localhost kernel[0]: FireWire (OHCI) TI ID 8025 built-in now active, GUID 0019e3fffe8072a0; max speed s800.
    Nov 18 18:00:17 localhost kernel[0]: Jettisoning kernel linker.
    Nov 18 18:00:17 localhost kernel[0]: Resetting IOCatalogue.
    Nov 18 18:00:17 localhost kernel[0]: Matching service count = 0
    Nov 18 18:00:17 localhost kernel[0]: Matching service count = 18
    Nov 18 18:00:17: --- last message repeated 4 times ---
    Nov 18 18:00:17 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:19:e3:66:97:7a
    Nov 18 18:00:17 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:19:e3:66:97:7b
    Nov 18 18:00:17 localhost kernel[0]: Previous Shutdown Cause: 5
    Nov 18 18:00:17 localhost mDNSResponder[16]: Adding registration domain tjasher.members.mac.com.
    Nov 18 18:00:17 localhost mDNSResponder[16]: Setting up AutoTunnel address FD14:A58A:53D0:1166:0219:E3FF:FE66:977A
    Nov 18 18:00:19 localhost fseventsd[42]: bumping event counter to: 0xfa0a6 (current 0x0) from log file '00000000000f52e0'
    Nov 18 18:00:22 localhost kernel[0]: Intel8254x -- Link Down -- 00:19:e3:66:97:7a -- called by enableHardware() --
    Nov 18 18:00:26 localhost kernel[0]: -- Auto-Negotiation Advertisement Register (04d) = 0xde1
    Nov 18 18:00:25 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[37]: Login Window Application Started
    Nov 18 18:00:26 localhost kernel[0]: -- Auto-Negotiation Link Partner Ability Register (05d) = 0x0
    Nov 18 18:00:22 localhost bootlog[48]: BOOT_TIME: 1195430411 0
    Nov 18 18:00:26 MacPro kernel[0]: -- Auto-Negotiation Gigabit Advertisement Register (09d) = 0xe00
    Nov 18 18:00:26 MacPro kernel[0]: -- Auto-Negotiation Gigabit Link Partner Ability Register (10d) = 0x4000
    Nov 18 18:00:26 MacPro kernel[0]: -- PHY Specific Status Register (17d) = 0x8040
    Nov 18 18:00:26 MacPro xgridcontrollerd[28]: Error: controller missing password file "/etc/xgrid/controller/client-password"
    Nov 18 18:00:26 MacPro com.apple.launchd[1] (com.apple.xgridcontrollerd[28]): Exited with exit code: 2
    Nov 18 18:00:27 MacPro kernel[0]: Intel8254x -- Link Up -- 00:19:e3:66:97:7b -- called by interruptOccurred() --
    Nov 18 18:00:26 MacPro rpc.statd[33]: statd.notify - no notifications needed
    Nov 18 18:00:26 MacPro xgridcontrollerd[28]: Notice: controller failed
    Nov 18 18:00:27 MacPro kernel[0]: -- Auto-Negotiation Advertisement Register (04d) = 0xde1
    Nov 18 18:00:26 MacPro configd[15]: setting hostname to "MacPro.local"
    Nov 18 18:00:27 MacPro kernel[0]: -- Auto-Negotiation Link Partner Ability Register (05d) = 0xcde1
    Nov 18 18:00:26 MacPro /usr/sbin/ocspd[64]: starting
    Nov 18 18:00:27 MacPro kernel[0]: -- Auto-Negotiation Gigabit Advertisement Register (09d) = 0xe00
    Nov 18 18:00:27 MacPro kernel[0]: -- Auto-Negotiation Gigabit Link Partner Ability Register (10d) = 0x7c00
    Nov 18 18:00:27 MacPro kernel[0]: -- PHY Specific Status Register (17d) = 0xaf08
    Nov 18 18:00:27 MacPro kernel[0]: Intel8254X -- Negotiated Speed: 1 Gb/s, Duplex: Full, Flow Control: Receive Pause Enabled, Transmit Pause Enabled
    Nov 18 18:00:27 MacPro kernel[0]: sandbox-exec 28 PARENTAGEEXEC_AND_DROPPROFILE SBF /usr/libexec/xgrid/xgridcontrollerd 13 (seatbelt)
    Nov 18 18:00:28 MacPro kextd[11]: writing kernel link data to /var/run/mach.sym
    Nov 18 18:00:30 MacPro com.wacom.wacomtablet[90]: TabletDriver[90]: Env RUNWITHLAUNCHD is set to 1
    Nov 18 18:00:31 MacPro loginwindow[37]: Login Window Started Security Agent
    Nov 18 18:00:31 MacPro Parallels[106]: Loading Hypervisor module...
    Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: extension /System/Library/Extensions/hypervisor.kext is already loaded
    Nov 18 18:00:32 MacPro kernel[0]: [Parallels] Parallels Hypervisor started.
    Nov 18 18:00:32 MacPro Parallels[112]: Loading Monitor module...
    Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: extension /System/Library/Extensions/vmmain.kext is already loaded
    Nov 18 18:00:32 MacPro kernel[0]: [Parallels] Parallels VM observer thread started
    Nov 18 18:00:32 MacPro Parallels[114]: Loading ConnectUSB module...
    Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: extension /System/Library/Extensions/ConnectUSB.kext is already loaded
    Nov 18 18:00:32 MacPro Parallels[116]: Loading Network module...
    Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: extension /System/Library/Extensions/Pvsnet.kext is already loaded
    Nov 18 18:00:32 MacPro Parallels[118]: Loading Virtual Ethernet module...
    Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: /Library/StartupItems/Parallels/Pvsvnic.kext loaded successfully
    Nov 18 18:00:33 MacPro kernel[0]: comparallels_kextPvsvnic1: Ethernet address 00:1c:42:00:00:01
    Nov 18 18:00:33 MacPro kernel[0]: comparallels_kextPvsvnic0: Ethernet address 00:1c:42:00:00:00
    Nov 18 18:00:33 MacPro ntpd[25]: bind() fd 28, family 30, port 123, scope 7, addr fe80::21c:42ff:fe00:1, in6is_addrmulticast=0 flags=17 fails: Can't assign requested address
    Nov 18 18:00:33 MacPro ntpd[25]: bind() fd 28, family 30, port 123, scope 8, addr fe80::21c:42ff:fe00:0, in6is_addrmulticast=0 flags=17 fails: Can't assign requested address
    Nov 18 18:00:33 MacPro Parallels[121]: Staring DHCP/NAT daemon...
    Nov 18 18:00:33 MacPro pvsnatd[123]: en3: DHCP/NAT for 10.211.55.2-10.211.55.254 netmask 255.255.255.0
    Nov 18 18:00:33 MacPro pvsnatd[123]: en2: DHCP for 10.37.129.2-10.37.129.254 netmask 255.255.255.0
    Nov 18 18:00:34 MacPro Parallels[125]: Restarting InternetSharing...
    Nov 18 18:00:34 MacPro Parallels[127]: Restaring CiscoVPN...
    Nov 18 18:00:34 MacPro com.apple.SystemStarter[31]: /Library/StartupItems/Parallels/Parallels: line 62: /System/Library/StartupItems/CiscoVPN/CiscoVPN: No such file or directory
    Nov 18 18:00:34 MacPro Parallels[129]: Initialization complete.

    Updates installed by Software Update are "delta" updates - they go from 10.x.y to 10.x.y+1, and are customized for a particular Mac model. It appears that in this case they also patch some files instead of replacing them fully. The "combo" update will update 10.x.anything to the latest 10.x.y, it'll update any Mac model, and in this case it appears they contain full files instead of patches. The delta updater for 10.5.1 is about 39 MB; the combo updater is about 110 MB. You can download the combo updater from the Support site. Sites such as www.macfixit.com often recommend installing the combo updater instead of, or after, the delta updater, as it often solves mysterious problems. One specific example is the numerous "SUID" messages when doing a "repair permissions" - the combo update gets rid of all but one, and that one is specifically stated by Apple to be okay. Of course, no guarantees, but the combo updater is a reasonable thing to try.
    Doug

  • The phone turns itself off every night

    Every night my iPhone 4 turns itself off so that nobody can call me, and I do not receive any  messages. If someome calls me, they are told that I can not be reached. To "open" the phone again, I have to make a call. Then it works all right the rest of the day. But the next morning it is "closed" again. It is a new phone. I complained and I got a new one, but it has the same problem.

    Try to set it up as new device, without using the latest backup, in case it contains corrupt data causing your problem. How to back up your data and set up as a new device

  • My MacBook Pro shut itself down and now it won't turn back on and the power light keeps flashing a green and amber but very dull. Help please!

    My MacBook Pro shut itself down and now it won't turn back on and the power light keeps flashing the amber light. I don't know what to do, and this has never happened before.

    Hello Toby135
    Reset the SMC or System Management Controller to resolve issues with the power on your MacBook Pro and power adapter.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    Regards,
    -Norm G.

  • My MacBook Pro has no sound every time it try to turn it up it displays a round cirlce with a line through it.

    My MacBook Pro has no sound every time it try to turn it up it displays a round cirlce with a line through it.

    Hi DeathDrone,
    Welcome to the HP Community! I will be happy to help with your sound problems. However, I will need some additional information to better assist you. What is your operating system? What is your product number?
    Find your product number on a notebook:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c00033108
    Finding your OS:
    http://windows.microsoft.com/en-CA/windows/which-operating-system
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Is Leaving MacBook Pro Turned On 24 Hours Bad?

    Hello. I'm just wondering whether it is okay to leave my MacBook Pro turned on all day.
    I often forget to turn off my laptop and I'm a bit worried whether not tunrining it off can
    bring bad results.

    Lion 2012 wrote:
    Hello. I'm just wondering whether it is okay to leave my MacBook Pro turned on all day.
    I often forget to turn off my laptop and I'm a bit worried whether not tunrining it off can
    bring bad results.
    Leaving it plugged in for a 24hr period will not harm it at all.  I've had mine plugged in for days at a time, and even running at near 100% cpu useage for up to 96hrs straight for some analyses.
    You should, however, try to unplug it and use the battery a bit at least every few days or once a week or so - just a partial discharge and charge at least every few days or min. of once a week is a good idea to make the battery last as long as possible.

  • I am trying to install windows 7 to my Macbook pro with bootcamp but every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7", any solutions ?

    Hi, I am trying to install Windows on my MacBook Pro with bootcamp. Every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7". I did this before using the same computer and the same hard drive so I am not sure why this is happening now but did´t happen then. Any solutions ?

    Was your Bootcamp info.plist manipulated to change any options?

  • Computer turns itself on every day at 8PM PLEASE HELP

    Hi I have an imac running 10.5.4. It turns itself on every day at 8PM. My auto on setting are unselected in the power options, and the auto off is set to 1:30 AM. I am also running windos xp with VM Fusionware. Can anyone please help?
    Thanks

    I have the older intel based mac and I unplugged everything from the machine for 20 seconds to reset the SMC and it still turns on at 8pm every day. any other suggestions??
    this is what in getting:
    9/11/08 8:00:16 PM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
    9/11/08 8:00:16 PM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
    9/11/08 8:00:16 PM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
    9/11/08 8:00:17 PM com.apple.launchd[1] (com.apple.ftpd) Unknown key: SHAuthorizationRight
    9/11/08 8:00:23 PM com.vmware.launchd.vmware[48] VMware Fusion 107508: Starting VMware Fusion:
    9/11/08 8:00:23 PM com.vmware.launchd.vmware[48] kextload serialization lock busy; sleeping (89 retries left)
    9/11/08 8:00:24 PM com.vmware.launchd.vmware[48] kextload serialization lock busy; sleeping (88 retries left)
    9/11/08 8:00:25 PM com.vmware.launchd.vmware[48] kextload serialization lock busy; sleeping (87 retries left)
    9/11/08 8:00:26 PM com.vmware.launchd.vmware[48] kextload serialization lock busy; sleeping (86 retries left)
    9/11/08 8:00:27 PM com.vmware.launchd.vmware[48] kextload serialization lock busy; sleeping (85 retries left)
    9/11/08 8:00:28 PM com.vmware.launchd.vmware[48] kextload serialization lock busy; sleeping (84 retries left)
    9/11/08 8:00:29 PM com.vmware.launchd.vmware[48] kextload serialization lock busy; sleeping (83 retries left)
    9/11/08 8:00:30 PM com.vmware.launchd.vmware[48] kextload serialization lock busy; sleeping (82 retries left)
    9/11/08 8:00:31 PM com.vmware.launchd.vmware[48] kextload serialization lock busy; sleeping (81 retries left)
    9/11/08 8:00:32 PM com.vmware.launchd.vmware[48] kextload serialization lock busy; sleeping (80 retries left)
    9/11/08 8:00:33 PM com.vmware.launchd.vmware[48] kextload serialization lock busy; sleeping (79 retries left)
    9/11/08 8:00:35 PM com.vmware.launchd.vmware[48] kextload: /Library/Application Support/VMware Fusion/kexts/vmmon.kext loaded successfully
    9/11/08 8:00:35 PM com.vmware.launchd.vmware[48] kextload: /Library/Application Support/VMware Fusion/kexts/vmci.kext loaded successfully
    9/11/08 8:00:35 PM com.vmware.launchd.vmware[48] kextload: /Library/Application Support/VMware Fusion/kexts/vmioplug.kext loaded successfully
    9/11/08 8:00:35 PM com.vmware.launchd.vmware[48] kextload: /Library/Application Support/VMware Fusion/kexts/vmnet.kext loaded successfully
    9/11/08 8:00:35 PM com.vmware.launchd.vmware[48] Internet Software Consortium DHCP Server 2.0
    9/11/08 8:00:35 PM com.vmware.launchd.vmware[48] Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
    9/11/08 8:00:35 PM com.vmware.launchd.vmware[48] All rights reserved.
    9/11/08 8:00:35 PM com.vmware.launchd.vmware[48] Please contribute if you find this software useful.
    9/11/08 8:00:35 PM com.vmware.launchd.vmware[48] For info, please visit http://www.isc.org/dhcp-contrib.html
    9/11/08 8:00:35 PM com.vmware.launchd.vmware[48] Configured subnet: 192.168.234.0
    9/11/08 8:00:35 PM com.vmware.launchd.vmware[48] Setting vmnet-dhcp IP address: 192.168.234.254
    9/11/08 8:00:35 PM com.vmware.launchd.vmware[48] Opened:
    9/11/08 8:00:35 PM com.vmware.launchd.vmware[48] Recving on VNet/vmnet8/192.168.234.0
    9/11/08 8:00:35 PM com.vmware.launchd.vmware[48] Sending on VNet/vmnet8/192.168.234.0
    9/11/08 8:00:35 PM com.vmware.launchd.vmware[48] Internet Software Consortium DHCP Server 2.0
    9/11/08 8:00:35 PM com.vmware.launchd.vmware[48] Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
    9/11/08 8:00:35 PM com.vmware.launchd.vmware[48] All rights reserved.
    9/11/08 8:00:35 PM com.vmware.launchd.vmware[48] Please contribute if you find this software useful.
    9/11/08 8:00:35 PM com.vmware.launchd.vmware[48] For info, please visit http://www.isc.org/dhcp-contrib.html
    9/11/08 8:00:35 PM com.vmware.launchd.vmware[48] Configured subnet: 192.168.85.0
    9/11/08 8:00:35 PM com.vmware.launchd.vmware[48] Setting vmnet-dhcp IP address: 192.168.85.254
    9/11/08 8:00:35 PM com.vmware.launchd.vmware[48] Opened:
    9/11/08 8:00:35 PM com.vmware.launchd.vmware[48] Recving on VNet/vmnet1/192.168.85.0
    9/11/08 8:00:35 PM com.vmware.launchd.vmware[48] Sending on VNet/vmnet1/192.168.85.0
    9/11/08 8:00:38 PM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[109]) Exited: Terminated
    9/11/08 8:00:39 PM Dock[123] _DESCRegisterDockExtraClient failed 268435459
    9/11/08 8:00:43 PM [0x0-0x14014].com.belightsoft.GetBackupAgent[149] GetBackupAgent Starting...Reading preferences...
    9/11/08 8:00:43 PM [0x0-0x14014].com.belightsoft.GetBackupAgent[149] Loading recent backups infos...
    9/11/08 8:00:43 PM [0x0-0x14014].com.belightsoft.GetBackupAgent[149] GetBackupAgent Terminating...
    9/11/08 8:01:04 PM FileSyncAgent[136] MKCOL /.FileSync (FAILED), httpStatusCode:405, errorType:100, transactionState:5, txnId:F81476B7-1FC7-44E9-823B-3A53C6FED319, auto-retries=0, manual-retries=0

  • My MacBook Pro turns on but not all the way, it gives me an icon of a grey folder with a question mark in the middle, and won't go further that that. Anyone knows why, or what's the problem?

    My MacBook Pro turns on but not all the way, it gives me an icon of a grey folder with a question mark in the middle, and won't go further that that. Anyone knows why, or what's the problem?

    If these do not resolve the issue or if you are not comfortable with proceeding through these steps then take your Mac to an Apple store or an Apple Authorized Service Provider.  An Apple store will perform these initial steps, diagnose the problem, and give an estimate for repairs (if needed).  If the Mac is less than one year old or is covered by AppleCare any repairs would be free.
              Genius reservation http://www.apple.com/retail/geniusbar/ .
              or find an Apple Authorized Service Provider https://locate.apple.com/country

  • I'm trying to upload proof of purchase of the macbook pro i bought, but every time it just stops. How to upload it ?

    I'm trying to upload proof of purchase of the macbook pro i bought, but every time it just stops. How to upload it ?

    Why don't you contact the online store's customer support?

  • The battery icon on my (old) MacBook Pro turned red. Then black. What does this mean?

    The battery icon on my (old) MacBook Pro turned red for a few moments, then black. What does this mean?

    penny41,
    Thanks, glad it helped you to check your battery status.
    Something else to look at would be the cycle count, as you mention that your computer is "ancient". If you have a high number of cycles, it may also be a sign that the battery is tired and possibly nearing it's life span, and may possibly need to be replaced soon. If you see that again you may try a SMC reset to see if that helps, but if it continues you may need a new battery at some point. The battery icon will usually say needs service, or something to that effect.  For the later MBP's Apple claims a life span of up to 1000 cycles, of this also will be dependent on who the battery is used, on the older ones I'm not quite sure what the claims were, and I don't know how old "ancient" in your case actually means.
    I provide this for your info, so that you understand what may possibly be occurring.
    I wish you the best.
    SMC reset:
    Follow directions for what applies to your machine, a battery you can remove, or a battery you should not remove yourself.
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

  • My macbook pro turns blue and freezes

    my macbook pro turns blue and freezes, especially when using hotmail. It blinks blue when switching in hotmail pages. Once fully blue I have to restart it as it crashes

    Step by Step to fix your Mac

  • Downloaded 11.0.3 (42) 64 bit to my MacBook Pro and it crashes every time I select a song a use the 'add to' function to add to a play list. It's never done this before, is it a bug with the new version?

    downloaded 11.0.3 (42) 64 bit to my MacBook Pro and it crashes every time I select a song a use the 'add to' function to add to a play list. It's never done this before, is it a bug with the new version?

    You could just disable updates. Change these settings in about:config.
    * app.update.auto - set to false
    * app.update.enabled - set to false
    You can still check for updates with the "Check for Updates" button in the About Firefox window, but it will download the update file anyway if there is an update available. You can also check which is the current release from here:
    * http://sjc.mozilla.com/en-US/firefox/new/

  • MacBook Pro turns on but will not load. Battery will power up and charge. The PRAM second start up seems to work, but the Apple timer continues add-infinitum. There is also a disc in the laptop so I can't load re-load software OS 10.6.1. How do I resolv

    MacBook Pro turns on but will not load. Battery will power up and charge. The PRAM second start up seems to work, but the Apple timer continues add-infinitum. There is also a disc in the laptop so I can't load re-load software OS 10.6.1. How do I resolve this problem?

    Try booting in Safe Mode by holding your Shift key down when booting. Also, try holding the eject key down when booting to eject the DVD. If you plug a mouse in and hold the clicker down when booting, that should eject the DVD.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • MacBook Pro turned off on its own and now won't turn back on.

    MacBook Pro turned off on its own and now won't turn back on.  Battery had 41% just before this happened and green indicator on power cord is showing, so it seems like it's charging.  What should I do?

    The led on the power adapter should be amber if it is charging.  Green just indicates that it is supplying power to the MBP.
    Try a SMC reset:
    http://support.apple.com/kb/ht3964
    Ciao.

Maybe you are looking for

  • Middleware:-Getting an error while generating objects

    Hi experts,     While generating objects as part of middleware generation in CRM 5.0 i am getting errors in transaction "GENSTATUS" because of which i am not able to perform my initial load and the error message is "TIME LIMIT EXCEEDED". Also i am ge

  • File Processing in PI - isolating an error in the payload

    Hello, I have a scenario where I don't think the requirement is feasible... Multiple idocs are created from the R/3 system and then are being generated into an xml file before PI picks it and processes it. The problem is that if one of the idocs enco

  • CS4 js/x scripting

    Hello all, I am trying to automate a watermark, to be placed on multiple EPS images (all images would be in a specific folder) Basically I have a template set up, that has the watermark details.  I am guessing I would place an image, one by one, onto

  • Pacman upgrade error with /usr/lib/libgmp.so.1

    /media # pacup Password: :: Synchronizing package databases... core is up to date extra is up to date error: failed retrieving file 'community.db.tar.gz' from ftp.archlinux.org : Connection reset by peer error: failed retrieving file 'community.db.ta

  • Quicktime Interactive Movie Mouse Control

    I have a quicktime interactive movie saved from keynote with chapters added in. The file pays full screen but at 800x600 screen resolution, the mouse left click button is not advancing the presentation. If I change the resolution to 1024x768 the mous