Macbook pro turns on for a minute and turns off before it fully loads

The MacBook Pro turns son for about 30 seconds before turning off again even though it is charged.

Is the power adapter attached? 
Have you tried a Safe boot?
http://support.apple.com/kb/HT1455
If that fails, I suggest an appointment at an Apple store genius bar.
Ciao.

Similar Messages

  • MacBook Pro turns on but will not load. Battery will power up and charge. The PRAM second start up seems to work, but the Apple timer continues add-infinitum. There is also a disc in the laptop so I can't load re-load software OS 10.6.1. How do I resolv

    MacBook Pro turns on but will not load. Battery will power up and charge. The PRAM second start up seems to work, but the Apple timer continues add-infinitum. There is also a disc in the laptop so I can't load re-load software OS 10.6.1. How do I resolve this problem?

    Try booting in Safe Mode by holding your Shift key down when booting. Also, try holding the eject key down when booting to eject the DVD. If you plug a mouse in and hold the clicker down when booting, that should eject the DVD.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • MacBook Pro turned off on its own and now won't turn back on.

    MacBook Pro turned off on its own and now won't turn back on.  Battery had 41% just before this happened and green indicator on power cord is showing, so it seems like it's charging.  What should I do?

    The led on the power adapter should be amber if it is charging.  Green just indicates that it is supplying power to the MBP.
    Try a SMC reset:
    http://support.apple.com/kb/ht3964
    Ciao.

  • MacBook Pro turns off when mega-safe adapter is removed

    Hello,
    I just installed a new battery, however, battey health condition seems normal but my macbook pro turns off whenever  i remove the mega-safe adapter. I also noticed that even though the battery says 100% charged, the fully-charged green indicator does not come on. Below is the system information.
    HELP!!!
    Battery Information:
      Model Information:
      Serial Number:    W0*****3LC
      Manufacturer:    SMP
      Device Name:    bq20z451
      Pack Lot Code:    0
      PCB Lot Code:    0
      Firmware Version:    201
      Hardware Revision:    000a
      Cell Revision:    165
      Charge Information:
      Charge Remaining (mAh):    5568
      Fully Charged:    Yes
      Charging:    No
      Full Charge Capacity (mAh):    5568
      Health Information:
      Cycle Count:    3
      Condition:    Normal
      Battery Installed:    Yes
      Amperage (mA):    8
      Voltage (mV):    12580
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):    10
      Disk Sleep Timer (Minutes):    10
      Display Sleep Timer (Minutes):    10
      Wake on AC Change:    No
      Wake on Clamshell Open:    Yes
      Wake on LAN:    Yes
      AutoPowerOff Delay:    14400
      AutoPowerOff Enabled:    1
      Current Power Source:    Yes
      Display Sleep Uses Dim:    Yes
      PrioritizeNetworkReachabilityOverSleep:    0
      Standby Delay:    4200
      Standby Enabled:    0
      Battery Power:
      System Sleep Timer (Minutes):    15
      Disk Sleep Timer (Minutes):    10
      Display Sleep Timer (Minutes):    15
      Wake on AC Change:    No
      Wake on Clamshell Open:    Yes
      AutoPowerOff Delay:    14400
      AutoPowerOff Enabled:    1
      Display Sleep Uses Dim:    Yes
      Reduce Brightness:    Yes
      Standby Delay:    4200
      Standby Enabled:    0
    Hardware Configuration:
      UPS Installed:    No
    AC Charger Information:
      Connected:    Yes
      ID:    0x0100
      Wattage (W):    60
      Revision:    0x0000
      Family:    0x00ba
      Serial Number:    0x00eee1de
      Charging:    No
    <Edited by Host>

    olacurrency wrote:
    error code: 4SNS/40000000: IPBR-9.165
    This is a current sensor on the power bus. This seems consistent with your symptoms.
    A faulty sensor on the logic board means  the board has to be replaced,  take in for repair:
    Genius reservation http://www.apple.com/retail/geniusbar/
    on-line https://getsupport.apple.com/GetproductgroupList.action
    check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • Macbook pro turns off at 60% battery

    Whenever my laptop gets to 60%, my macbook pro turns off. I've read that resetting the smc might be able to fix it but it hasn't made much difference. Here's my battery info. Any help would be great. Thanks!
    Battery Information:
      Model Information:
      Serial Number:          9G12109CVD3MA
      Manufacturer:          DP
      Device Name:          bq20z451
      Pack Lot Code:          0
      PCB Lot Code:          0
      Firmware Version:          201
      Hardware Revision:          2
      Cell Revision:          158
      Charge Information:
      Charge Remaining (mAh):          1670
      Fully Charged:          No
      Charging:          Yes
      Full Charge Capacity (mAh):          2474
      Health Information:
      Cycle Count:          905
      Condition:          Service Battery
      Battery Installed:          Yes
      Amperage (mA):          734
      Voltage (mV):          12136
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          10
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Wake on LAN:          Yes
      Current Power Source:          Yes
      Display Sleep Uses Dim:          Yes
      PrioritizeNetworkReachabilityOverSleep:          0
      Standby Delay:          4200
      Standby Enabled:          0
      Battery Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          2
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          Yes
      Standby Delay:          4200
      Standby Enabled:          0
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          Yes
      ID:          0x0100
      Wattage (W):          60
      Revision:          0x0000
      Family:          0x00ba
      Serial Number:          0x0031846b
      Charging:          Yes

    The Cycle Count is 905 so it may be time for a new  battery. Maximum is 1000.
    Check here >  Mac notebooks: Determining battery cycle count

  • Macbook pro turns off when i unpliug

    macbook pro turns off when i unpliug

    You either need to plug in your charger and if that isn't working if your machine is less than a year old take it in to your nearst Apple Store and let them deal with it. Or if you are out of warrantee you will need to get a new battery for your Mac
    Cheers
    Don

  • I wanted to calibrate the battery my new macbook pro turns off

    You should perform this procedure when you first use your computer? is this true? new macbook pro on may 11 2010 what happed was today on may 22 2010 i wanted to calibrate the battery my new macbook pro turns off when it runs out of battery. 3 times Typically, when macs run out of battery, they go into sleep mode. However mine skips this completely and just turns off. WHY? does this mean the battery is bad?
    Resetting the PRAM (http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html) fixed the problem in my case. then i did the calibrate the battery again this time it went to sleep not shut down i did this 3 more times why?
    the 3 forced shut downs without entering SafeSleep. with logs indicating improper shutdown, will that cause severe corruption to the os and do i have to reinstall the os now?2.66 ghz 2010

    the 9 more 4 in 10.6.4 forced shut downs without entering SafeSleep. with logs indicating improper shutdown, will that cause severe corruption to the os and do i have to reinstall the os now?2.66 ghz 2010 but if it happens again you should try
    i hate to do this reinstalling the OS, if this do not work also, then you should call apple, or take your MBP to an apple store. on june 24 2010 i am going to talk to spence about this. so what do i do now? this happed on june 16 2010 4 more times
    without entering SafeSleep. only one time it worked on 10.6.4
    You should perform this procedure when you first use your computer? is this true? new macbook pro on may 11 2010 what happed was today on may 22 2010 i wanted to calibrate the battery my new macbook pro turns off when it runs out of battery. 9 times Typically, when macs run out of battery, they go into sleep mode. However mine skips this completely and just turns off. WHY? does this mean the battery is bad?

  • My Macbook Pro turns off suddenly with no reason

    My Macbook Pro turns off suddenly with no reason. The battery it's ok, the temperature of the mac it's normal, but the pc turns off. What can i do ?

    Xirver,
    if you boot into Safe mode, does your MacBook Pro turn off suddenly then also?

  • 1st Gen. Macbook Pro Turns Off Suddenly, Even When Plugged In

    Help Me!
    My 1.83 Ghz Intel Core Duo shuts down without warning after I start it up. Sometimes it's 1 minute into the startup, sometimes its 10. But after installing snow leopard 10.6, it does this everytime without fail. My screen doesn't work, so I have it plugged it into an external monitor. When it's turned on and working, it functions perfectly. But all of a sudden, it will turn off. I copied the power information from the system profiler, which is pasted below. Any help on possible fixes would be great. Maybe some sort of MPU reset or something. Also, I tested the battery I'm currently using in another Macbook Pro of the same exact model, and it works fine. Help Me!
    Battery Information:
    Model Information:
    Manufacturer: SMP
    Device name: ASMB012
    Pack Lot Code: 0002
    PCB Lot Code: 0000
    Firmware Version: 0110
    Hardware Revision: 0500
    Cell Revision: 0200
    Charge Information:
    Charge remaining (mAh): 4176
    Fully charged: No
    Charging: Yes
    Full charge capacity (mAh): 4764
    Health Information:
    Cycle count: 86
    Condition: Normal
    Battery Installed: Yes
    Amperage (mA): 1227
    Voltage (mV): 12515
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 180
    Display Sleep Timer (Minutes): 0
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On LAN: No
    Current Power Source: Yes
    Display Sleep Uses Dim: No
    Battery Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 0
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Display Sleep Uses Dim: No
    Reduce Brightness: No
    Hardware Configuration:
    UPS Installed: No
    AC Charger Information:
    Connected: Yes
    ID: 0x0100
    Wattage (W): 60
    Revision: 0x0000
    Family: 0x00ba
    Serial Number: 0x00031c59
    Charging: Yes

    WELCOME!http://i29.tinypic.com/2ef7yfn.gif!
    Check out the following KB Articles: http://support.apple.com/kb/HT1411 Apple Portables: Resetting the System Management Controller (SMC)
    http://docs.info.apple.com/article.html?artnum=2238 Resetting your Mac's PRAM and NVRAM
    http://docs.info.apple.com/article.html?artnum=301283 Troubleshooting when there's no picture on the display

  • Macbook Pro 13' freezes for 10 secs and hard drives clicks

    Hi all,
    I recently purchased a macbook pro 13" and it has started to make clicking noises every now and again (but it doesn't beep). The mac is also starting to freeze for about 5-10secs and then returning to normal.
    The hard drive inside the macbook pro is a 160GB model.
    Does anyone know why this is happening and how i can solve it?
    Many thanks

    Contact Apple. It sounds like a hard drive issue. It may need to be replaced.
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

  • My 2009 Macbook Pro turns off every 5-15 minutes

    Yeah, the problem started happening a couple of months ago, but it wasn't that big of a deal. I found that if I were to turn it off nightly it would behave better. It was fine for a while, but as of late it will shut off about every 5-15 minutes.It was getting finiky too, if someone bumped the desk funny it would turn off. I tried resetting the SMC but that doesn't seem to have fixed it.
    Any ideas? I've thought about doing a clean install of the OS again, but it seems like it might be a hardware problem, so that probably wouldn't work.

    I would suggest making an appointment at the nearest Apple Store Genius Bar or Apple Authorized Service Provider. What you are describing seems to show a problem with hardware.
    To make an Genius Bar appointment check:
    http://apple.com/retail/geniusbar
    To find your nearest Apple Service Provider check the link below and then click the "Service" box. There you will be able to put your location.
    http://locate.apple.com
    It might not hurt to run the Apple Hardware Test that came with your Mac's OS & Application Software DVDs and note down any errors reported by it. For more information about the AHT visit:
    http://suppot.apple.com/kb/ht1509
    Hope this helps!
    Message was edited by: vea1083

  • My macbook pro turn off itself and it wont turn on

    hello  i was watching video on my macbook pro and suddenly the laptop turn off by itself and i tried to turn it on but it wont 

    Are you connected to the charger? Is it charging? Have you tried to settle SMC?
    http://support.apple.com/kb/HT3964

  • Macbook pro turns off and reboots randomly

    Hi I need help My 2010 unibody Macbook Pro is driving me nutz !!! Does anyone have any idea WHAT would cause my 2010 Macbook Pro to shut off and reboot randomly all by itself ? I took it to a computer storre for repair they placed the RAM and charged me 126.00 yet its still happening not as frequently but it's not fixed. Grateful for any help you can give.

    Hello sweetbrandigirl2004,
    Based on your post it seems your computer is shutting down at random. That does sound troublesome. After your computer shuts down, do you see any messages or errors displayed? The following article offers some troubleshooting steps you may want to explore:
    OS X Yosemite: If your Mac restarts and a message appears
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • MacBook Pro Turned Off and Won't Reboot

    I had been playing a video game for about an hour. Afterwards, I strated surfing the net and in about 15 seconds, the computer just turned off. I noticed it was rediculously hot, so I inplugged it, removed the battery, and let it sit until it cooled off.
    After I reinstalled the battery, I held the power button and nothing really happened. The front LED turned on, but no other activity whatesoever took place; not a sound. So, I held the power button and the indicator turned off.
    It's almost like the thing is completely dead. I would appreciate any help, because I am a student, and I really can't afford to have it fixed.

    As an update:
    I listened more carefully, and it seems like the hard drive is spinning up; however, the computer does not make what sounds like the optical drive ejecting, nor is there any sound or picture.
    The activity is actually barely audible.
    Thanks again.

  • Macbook Pro or Air for years 11 and 12

    Hello,
    I am entering year 11 next year and may school has suggested that my year by an air or pro.
    I will be typing my notes in class on the notebook every day.
    My school day is around 7 hours and i may do my homework on my laptop in the library after school ( in terms of battery use)
    I will mainly be using imovie for assignment, powerpoint and word.
    I am deciding between whether i should buy the air, an external hardrive and an external disc drive and the accessory that lets you use the laptop for a few more hours ( extra plug in battery) OR
    The pro with retina display ( the middle version in terms of storage)  and buy the external disc drive OR
    Buy the pro ( no retina) and just put up with the heaviness.
    Thanks for your help

    Unless you are into games, movie making, or heavy duty Photoshop, there is little reason to go Pro, other than the screen resolution.  And games may not all be optimized for Notebook GPUs anyway.  So research your software needs thoroughly before jumping in.  Pro 15" does give you more screen real estate for windows, though some can't read at so high a resolution.

Maybe you are looking for

  • Report on a .DLL file

    I need to run an inventory report on a specific .DLL file for all workstations at my site. I need the date and version of this file. How do I get ZEN inventory to grab and store this information to the database? Or if it's already in the database how

  • Multiple iPod Touch issues

    I received my iPod Touch last Thursday and then spent most of Friday just trying to get the blasted thing to accept my wireless password. Note: I have multiple wireless devices, (one router) all of which use the same password with no problems. Finall

  • How to use HR_MAINTAIN_MASTERDATA to terminate an employee

    Greetings experts: I'm working on an inbound interface that, among other things, can terminate an employee.  I'm new to ABAP and so it was recommended to me early on to record PA40 for this action.  That seemed to be working great until they added a

  • How to add estimated additional charges to PO lines

    Hi all, As a business need I want to add estimated additional charges to PO lines like bank expenses, transportation and misc duties. it was available with process manufacturing inventory items by using aquisition cost window. But, how could it be ap

  • Set Document ID Value and DocId url no longer works

    So my problem is i'm trying to make the Document ID value a bit more readable. For example I have three libraries starting with ABC-1-1,ABC-2-1 and ABC-3-1 > When I change these values to a value that means something, like ABC-1-1 is now ABC-101-1, t