Macbook pro Unable to connect with my belkin router 5ghz

I have recenly purchased belkin N750 dual core router (1. 2.4 Ghz and 2. 5 Ghz).  My macbook detects both wireless network, however, it is not connecting with 5Ghz.
I have updated the firmware of my router. Now it is most updated.
I have also performed network diagnostics still I am not able to connect 5Ghz.  However, I am able properly connect with 2.4 Ghz network.
Pls guide me.

Hello Oliver,
I would start with removing your Wi-Fi network from your Preferred Network list. To do that, navigate to the Symptom: After restarting or waking from sleep, my computer might not connect to the Internet section in the first article and it will walk you through that. Another thing you can try is creating a new Network Location to see if there is an issue with your current configuration and the steps for that are in the second article.  
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/en-us/HT202222
Using network locations (Mac OS X v10.6 and later)
http://support.apple.com/en-us/HT202480
Regards,
-Norm G.  

Similar Messages

  • My macbook pro is not connecting with my iPhone, help?

    my macbook pro is not connecting with my iPhone 4S, help? I followed the instructions but somehow the Iphone doesn't connect!

    I am having the same problem.  First on a new ViewSonic, which I sent back thinking it wasn't working.  Now the same problem on my new Powerbook Mac with a new Epson projector.  Apple support hasn't been helpful.

  • My Contacts app for macbook pro will not connect with my yahoo and keeps asking for password.

    My Contacts app for macbook pro will not connect with my yahoo account and repeatedly asks for yahoo password, any soliutions to this?

    This is due to a change in Yahoo's security settings. You need to go into your Yahoo account settings and create a special App Password, then use that password in Contacts to access your account. Same goes for Calendar.

  • Why does my macbook pro often lose connection with the canon mx922?

    why does my macbook pro often lose connection with the canon mx922? This happened with the HP printer as well.

    This may answer your Bonjour questions:
    http://support.apple.com/kb/PH11449
    https://www.apple.com/support/bonjour/
    Ciao.

  • MacBook Pro will not connect with Printer

    My MacBook Pro will not connect to my HP Photosmart Printer, both are wireless. Receive a error message

    What version of OS X?  What router?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • My macbook pro can not connect to my telus router

    my macbook pro can not connect to my telus 2wire router

    Had a similar problem with Macbook Pro3,1 on 10.5.8 - I chatted with Telus support.  They remotely updated firmware on the Actiontec V1000H modem and it was resolved immediately.

  • MacBook Pro dropping bluetooth connection with HP Officejet 100

    I've recently started developing problems with my MacBook Pro (OS X 10.7.4) maintaining a bluetooth connection with my HP Officejet 100 Mobile Printer.
    The problem I'm seeing is that when I send something to the printer, everything starts out okay, but then after about 10 seconds, the bluetooth icon in my status bar indicates that it is no longer connected.     The printer pauses for a minute or so and then spits out the half-printed page.
    Anybody else seeing this?   Any suggestions on how to fix?

    I have a similar issue, albeit a different bluetooth printer from yours.
    According to a review on CNET's website, the dropping of bluetooth connections seems to have been introduced in the 10.7.4 update and did not exist in the 10.7.3 version of the Mac OS X Lion software.
    MacBook Pro with Mac OS X 10.7.4 (Lion)
    Canon Selphy ES30 with Canon BU-30 USB bluetooth adaptor

  • MacBook Pro's wireless connectivity with ZTE 531 ADSL modem using BSNL broadband

    I have tried to connect macbook pro with BSNL broadband internet connection using ZTE 531 ADSL modem. The connection using both wireless mode and ethernet mode failed repeatedly. Using the same modem, I am able to connect to internet through my Sony Viao running Windows 8 and HP630 running ubuntu (both in wireless mode and ethernet mode). I have tried the 'assist me->diagnostics' option in Macbook's network diagnostics. The first 4 indicators are green, but the remaining 2 (ISP and server) remains yellow. Repeated attempts were made by restarting the modem.
    Surprisingly, the Macbook works fine with a newly purchased Dlink N150 ADSL2 modem.  I have used the same WIFI settings ( as in the ZTE modem) in Dlink modem also. What could be the reason for this ?

    Hello jayan_a_r,
    From what you are talking about, it seems like you have done some good troubleshooting to attempt to sort it out. Try using a different Network Location as sometimes that could be an issue when trying to access the internet. Also make sure that modem is using the recommended settings for the wireless access. 
    Using network locations (Mac OS X v10.6 and later)
    http://support.apple.com/en-us/HT5289
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/en-us/HT4199
    Regards,
    -Norm G. 

  • Retina MacBook Pro is not connecting with Airport Extreme 5 GHz signal

    I believe I have done my due diligence to find the answer to my question here and other places but I must be missing it. I have a Retina MacBook Pro that as far as I know should select the 5 GHz signal from my Airport Extreme (Generation 1 with 7.6.4 firmware) which is literally 3 ft. from my computer. When I click on the Airport icon in the menu bar, it is indicating a 2.4 GHz connection. I have looked at discussions which say I can give separate names to to both the 2.4 GHz and 5 GHz signals. I can't seem to find that. I also read where you can reorder the order of signal preference. I can't seem to find that either. Interestingly, I have an Airport Express that is extending the network. When option clicking on its icon in airport utility, I can see both the 2.4 and 5 GHz information. I don't se that in the Airport Extreme. I am thinking about gettng the newest Airport Extreme but if I don't need to...
    Thanks for any help!

    as far as I know should select the 5 GHz signal from my Airport Extreme (Generation 1 with 7.6.4 firmware) which is literally 3 ft. from my computer
    A Generation 1 AirPort Extreme is not a simultaneous dual band wireless router. It can produce either a 2.4 GHz....or....a 5 GHz wireless network signal, but not both simultaneously.
    If you want the Gen 1 Extreme to produce and deliver a 5 GHz wireless network, it can do so, but any 2.4 GHz devices that you have will not be able to connect to the 5 GHz signal.
    A new simultaneous dual band AirPort Extreme will produce both a 2.4 GHz and 5 GHz signal simultaneously. Wireless devices will automatically connect to the best signal quality based on their capabilities and location in relation to the AirPort Extreme.

  • How can I fix my MacBook Pro losing wireless connectivity with Epson Stylus NX625 printer.  It will work once and then I get an error saying the printer is not connected.

    I can connect to my Epson Stylus NX625 through my wireless network and print a page or two, but then the next time I go to print it says that the printer is not connected.  Any fixes?  I have tried deleting the printer and re-adding it to my MacBook Pro OS X version 10.9.4, but sometimes it doesn't even find it, and other times it says it is connected, but when I go to print it says not connected.  Very frustrated.  I have also installed the latest drivers, etc.
    What now?

    Your computer is going to run hot while playing CPU/GPU intensive games - it should heat up and the fans should be noticably loud. As to why it's 'crashing' - can you post a kernel panic log? You may have some third-party kexts that are causing the problems.
    Clinton

  • Macbook pro won't connect with iphoto library

    One of the reasons I upgraded to my new Macbook Pro in the first place is that iPhoto was hanging up or crashing on my old G5 tower, and now I can't seem to access my old iphoto library that I had backed up on my exteranl drive. More accurately, it can accesss one from 2007, but nothing more current. I'm currently running a 2.5 GHz Intel core i7 w/ 4GB 1333MHz DDr3 v 10.7.2. How do I get connected to the most current library, or at the very least get at all my photos past 2007, and will I still be able to bring in all my folders and albums et al?
    Thanks!

    Iphoto 2 and 3 were the 'default' names iPhoto assigned to my libraries.
    So I loaded iPhoto Library Manager, and it helped somewhat. I was not able to rebuild (said its XML file contained no image records...? ) or open the most current library, but I was at least able to extract the photos ( I think I have all of them). Is there any thing else I can try? I'm not relishing re- tagging/albuming all my pics since 2007..... Yoiks.
    Thanks for your help.
    Message was edited by: Rufous Corvax

  • Why can't I get my MacBook Pro to FaceTime connect with my iphone5?

    I FaceTime on my iphone 5 all the time.  My mom has a MacBook Pro.  I set up FaceTime one her computer.  When I initiate a FaceTime (or vice versa), it continues to ring and say "connecting ......).  It never connects.  What do I need to do?

    Hello beverly00,
    We've a couple of articles that can be quite useful in sorting issues initiating FaceTime calls.
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/TS4185
    Cheers,
    Allen

  • New MacBook Pro can't connect to D-link router

    Hi everyone! I just upgraded from an early 2007 MacBook Pro to the latest 15" MacBook Pro with Core i7 chip. Did a full migration with the Migration Assistant. Everything went fine. Could connect effortlessly with my Airport Extreme Base Station at home. However at work, I use a D-link wireless router. And somehow, the computer refuses to connect to it!! I see my office network on the list when I click on the Airport icon in the menu bar but when I attempt to connect to it, I get a connection time out error. The office network is also in my Network pref pane under "Preferred Networks". But somehow, the computer refuses to connect to it. I've already tried turning the Airport off and on again. Re-starting the computer. Re-starting the router. Nothing works.
    My old MacBook Pro was fine with the D-link router but this new computer seems to be rather cranky.
    Does anyone have any ideas?

    Strange thing happened. Today the D-link router suddenly decided to work with my MacBook Pro!! I did not do anything or make any changes to any settings. Multiple re-starts yesterday failed to yield any results. And yet today it is working!! I have absolutely no idea why.
    Perhaps the hardware is "shy" and needs multiple "introductions" before it wants to come out and play. Your guess is as good as mine. Anyway, as long as it works and stays working, I'm happy!

  • New Macbook Pro reluctant to connect to Airport Extreme at 5ghz

    I brought the latest 17" 2011 Macbook Pro back in April this year, to replace an older 15" MBP. I'm mostly happy with the new machine, but have noticed one frustrating problem.
    When waking from sleep, and perhaps even from booting cold, the Macbook Pro always connects to my Airport Extreme at the slower 2.4ghz speed. My old Macbook Pro was always keen to jump onto the same network at 5ghz unless it was too far away to get a good quality signal. I still have the old MBP and it still behaves this way, correctly. The new Macbook Pro is meant to have more ariels in it for wifi (albiet unlikely to be present in my year or two old Airport Extreme) but I would expect it to behave at least as well as its older sibling.
    The thing is if I disable Airport and re-enable it will then mostly lock on at 5ghz, its just frustrating having to do so. It's not even helped by locality, I'm currently in the same room 1m away from the Airport Extreme and it still wakes up onto 2.4ghz.
    I've yet to upgrade to Lion, so am running on Snow Leopard. I've heard friends have niggling problems with Wifi waking from sleep anyways, so I look forward to seeing how this problem alters when i do upgrade.
    Any suggestions, or anyone else experiencing the same behaviour? Thanks
    Cheers
    Jim

    Delete the connection information for the 2.4 GHz connection and it won't be able to connect at 2.4 GHz.

  • Macbook Pro won't operate with Netgear wireless router

    In my setup, the macbook pro's physical IP address has to be configured in my router and that seems to be entered OK. However, the macbook won't work wirelessly via the router. The router uses 128bit hex WEP key and the macbook at first seems to accept the key even though it fails to function. When I go back to check the settings however, it seems the macbook is requiring a WEP password, not a key. Could this be the cause of my problem? How can I sort out this problem please? TIA .... Greg

    First try with out a password. Then try a 10 digit WEP key.

Maybe you are looking for

  • Creating characteristic Relationship in IP

    Hi all, How do I create characteristic relationship in IP? I want to derive Employees based on certain Cost Center. This works well in BPS. But in IP, when I go to Characteristic Relatioship tab, there is no option/button to create a new relation. Ho

  • What is the webroot/firefox 5.0 conflict?

    ''locking as a duplicate - https://support.mozilla.com/en-US/questions/855602'' I am continually prompted to updae my 4.0.1 v of Firefox w 5.0. When I attempt to do that, I receive a message about a possible conflice with my Webroot security software

  • OHS + Apex + TCL

    Hi all, I have installed here on my machine Oracle 10g R2, Oracle comapanion (HTTP Server Apache 1.3, PHP 4.3) ActiveTCL 8.5.4 Apex 3.2. I would like to make this machine in a small web server, since I'm running on windows XP. Everything above is wor

  • ESS Webdynpro problems

    Hi, I have installed and configured ESS, but I am experiensiing som problems with some iViews. Espacally under Personel Information. The ivew doesn't show any error, but there are no data displeyed. The only option availbile is the cancel or exit but

  • Windows 7 Security settings -Downloads

    Hi  Does anyone know why my system setting does not allow me to download even basic download files such as firefox setup files? I keep getting "Your current Security setting does not allow this file to be downloaded" The issue is not my browsers as b