MacBook pro unabled start up

13 inch MacBook pro unabled to start up, a stop or no entry icon appeared instead of apple logo, and continue loading.

Try rebooting and hold down the command-r keys.

Similar Messages

On MacBook Pro unable to print webpage; I get a single blank page. But I can print using Safari. Started last week while using Firefox 3.6. I downloaded Firefox 5.0--same problem.

On MacBook Pro unable to print webpage; I get a single blank page. But I can print using Safari. Started last week while using Firefox 3.6. I downloaded Firefox 5.0--same problem.

I am now able to do live broadcasts with my i-sight, but my original problem still exisits....
Unsolved Problem:I need to be able to broadcast from CamTwist as CamTwist is the only program that will allow me to do what I need to do. Justin.tv and Ustream.tv do not recognize CamTwist for reasons I can not explain.

In Mail on macbook pro. unable to rename the mailboxes because the "rename mailbox" option is not highlighted

in Mail on macbook pro. unable to rename the mailboxes because the "rename mailbox" option is not highlighted.
Thanks Jim...........

Thank you SO much. Everything I had tried just expanded the size of each columns. Finding that slender area to the right of the message columns was tricky, but it worked. Wish that was more intuitive.
Thanks again.

MacBook pro doesnt start. When I start my lap top, it shows the apple and the line uploading but it only goes like to 1/3 and then it goes blank for some seconds, then it turns off by itself and turn on again and happen the same, apple logo, etc

MacBook Pro doesnt start. When I start my lap top, it shows the apple and the line uploading but it only goes like to 1/3 and then it goes blank for some seconds, then it turns off by itself and turn on again and happen the same, apple logo, line .. the noise like-fan going on, then turn off and turn on again. Tried starting holding option command P and R key and didnt work either. Starting to think I have lost all my data inside

Try a SMC reset.
http://support.apple.com/kb/ht3964
It might be helpful if you indicated the exact model/year of your MBP. Are you running Lion OSX?
Ciao.

After using an external HD for time machine back up, MacBook Pro unable to restart

I just bought a new MacBook Pro, before starting to transfer anything from my old MacBook Pro, I did a Time Machine backup on the new external HD (did not use the original ext. HD that I usually used to do my back ups). The back up was successful, I ejected the ext. HD, my old Mac went to sleep and I was not able to wake it up. I restarted it but each time I get a message in several languages that I must turn off and restart again. Done it but doesn't work. I tried to restart it by plugging the ext. HD but didn't work either. Tried to restart it by pressing on "shift", did see the bar trying to restore, but eventually the bar disappears and the grey spin starts then freeze, then computer goes into coma. What to do?

Richard Anderson1 wrote:
I am a little confused. I have an internal drive that I want to back-up to an external drive. BUT also, more importantly actually, I have an external that has total different contents than the internal and I also want to back that up. Will time machine do that?
Yes, as long as the drive is formatted properly.
In other words I want to back internal to "drive B"and I want to back up "drive A" (that has totally different contents than internal) to B drive as well. Can that be done in time machine?
While drive "A" is connected and mounted, go to +System Preferences > Time Machine > Options.+ If it's listed in the exclusion list in black, just select it, click the minus sign, then Done. It will be backed-up on the next backup, along with your internal HD.
But if it's listed in gray, you can't remove it. That means it's not formatted properly. You'll have to copy the data elsewhere temporarily, reformat, then copy it back. See #1 in [Formatting, Partitioning, Verifying, and Repairing Disks|http://web.me.com/pondini/AppleTips/DU.html] (or use the link in *User Tips* at the top of the +Using Snow Leopard+ forum).

HT4796 Hi, I've just bought a new Macbook Pro and started migrating from PC but the remaining time is about 70 hours long, I just wanted to know if that timing is normal and if not, does leaving running my MacBook that time can affect it?

Hi, I've just bought a new Macbook Pro and started migrating from PC but the remaining time is about 70 hours long, I just wanted to know if that timing is normal and if not, does leaving running my MacBook that time can affect it?

70 hours... no, it's not normal but it can't hurt your Mac to be running for that amount of time.
Try this support article > OS X Mavericks: Transfer your info from a PC

How long does it take for a macbook pro to start , mine takes about 1 mn is this normal?

how long does it take for a macbook pro to start , mine takes about 1 mn is this normal?

Details of your specific hardware/software setup are in play, of course.
But, yes, that sounds normal.
charlie

Macbook pro doent start

macbook pro doesnt start, comes with question mark. I do not have the recovery disc anymore.

Your computer can't find a boot drive. It's possible that your hard drive is dead/dying or that your MBP has simply 'forgotten' your startup drive. Try rebooting while holding down the option key and see if your internal drive shows up as an option to boot from.
You really need to have a copy of the installation disc(s) that came with your MBP. You can order a set by calling Apple - I don't know the number, but there's a store in Amserdam - http://www.apple.com/nl/retail/amsterdam/.
Clinton

MacBook Pro: Unable to Empty Trash (secure or otherwise). Have tried all remedies suggested on Apple's site. I think "Secure Empty Trash" bogs at the first file "iPhone4, 1_8.02_12A495_Restore.ipsw" at 1.78 GB size and goes no further.

MacBook Pro: Unable to Empty Trash (secure or otherwise). Have tried all remedies suggested on Apple's site. I think "Secure Empty Trash" bogs at the first file "iPhone4, 1_8.02_12A495_Restore.ipsw" at 1.78 GB size and goes no further. When I try to move it out of Trash to a temporary location so I can empty remainder of Trash, I get the message "Some of the items you are moving are in use by another application. Moving the items can cause problems with the application using them. Are you sure you want to move these items?" at which point I select "Stop" to avoid possible disaster. Can you help? Thanks.

01/05/15 6:01:27.000 pm kernel[0]: Previous shutdown cause: -62
That usually indicates an abnormal shutdown due to a hardware fault. The exact cause can only be determined by Apple, so schedule a Genius Bar Reservation.

My MacBook Pro just started to run very slow, what can I do to fix it?

My MacBook Pro just started to run very slow, what can I do to fix it?

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Otherwise, take the steps below when you notice the slowdown.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Macbook Pro dont start

Macbook Pro dont start, ask draw in lcd

Hello, kukel.
Thank you for visiting Apple Support Communities.
Here are a couple troubleshooting articles that I would recommend going through when experiencing this issue.
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Cheers,
Jason H.

My macbook pro has started running slowly! Any ideas?

My macbook pro has started running slowly. Particularly the internet (firefox and safari). I have tried repairing the disk / verifying the disk and the permissions via Disk Utility, and have also tried uninstalling and re-installing firefox, and updating the software (all up to date). None of this has helped.
The old Dell laptop we have is running faster than my mac!
I also have Parallels Desktop Installed with Windows 7, although this has never caused a problem in the past...
I am running with Mac OS X, Version 10.6.8, processor 2.66Ghz Intel Core Duo, and 4GB memory (it's normally lightning fast!).
Any ideas would be much appreciated.
Thanks.

This is a known problem with Parallels and the recent update for 10.6.8. You do not need to actually have Parallels running to experience the problem and there is nothing in Activity Monitor that would indicate the issue is related to Parallels. You can find the explanation on Parallels site. They have put out an update to correct the problem:
http://kb.parallels.com/111541

Why is it taking forever for my MacBook pro to start up?

It is taking forever for my MacBook pro to start up. It's been on the screen with the grey apple and the spinning icon for about 20 minutes now. I tried holding down the shift button when powering up to reboot in safe mood but that is taking forever as well. Any suggestions?

Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

My early 2011 Macbook Pro on start up has wifi, but drops it soon after and never comes back, AHT shows nothing wrong. Multiple wifi's tried and same on all.

My early 2011 Macbook Pro on start up has wifi, but drops it soon after and never comes back, AHT shows nothing wrong. Multiple wifi's tried and same on all. I have also re-installed OSX from scratch and still happens.

I have the same problem. I have a white macbook 2010, with mavericks os. I just found my mac not powering on and then I tried to run it on safe mode by holding the shift button but it will turn off seconds after I let go of the shift button. I am able to access the desktop and use it while holding the shift button the whole time. It's a bit slower than before but I figured maybe it's because of holding down shift button.
I went to the Apple Store to have them look at my mac and I was told it's a failed hard disk. I wasn't told why he was able to conclude that a failed hard disk is causing the problem, I was just told to get a replacement. But the thing is when I ran Disk Utility it says, "disk appears to be okay." So I also feel like it's possible it's not a hard disk issue because it's also the first time it happened. My mac was working perfectly fine before all this.
Do you know anything else that could cause this problem? Were you able to find out what's wrong?
Thanks.

My macbook pro (2011) starts up very slow and has other startup resolution

I have two problems:
My Macbook pro (Lion) starts up very slow. Many things seem to happen during startup. The screen goes small, blue, back and many times the loginscreen is coming up in a lower resolution. When I do a Pram reset it starts up with the correct resolution but after a couple of startups it goes back to 800x600 resolution (I guess). When I Log in the resolution is ok so only the login screen is a lower resolution.
Can anybody tell me what can be wrong here?
And if there is a solution beyond resetting the PRAM?

Hello,
For the screen resloution problem:
I don't know if you have solved your problem yet but i had the same exact problem this morning and was able to find the solution and fix it.
All you have to do is safe-boot your machine (hold shift key during restarting/booting) and after the next restart it should be fine.
Hope it helps.

MacBook pro unabled start up

Similar Messages

Maybe you are looking for