MacBook Pro Unibody (late 2008) crash when using GeForce 9600M GT

Every time I do heavy 3D rendering or play 3D games (such World of Warcraft) with the NVIDIA GeForce 9600M GT, after few minutes my MacBook Pro (unibody, late 2008) freezes, black screen and audio looping, no actions possibile, only hard shutdown... No problems with the 9400M.
What should I do? Get a replacement?

I've had mine for a little less than two months and I noticed the overheating shortly after I got it. I think it's mostly because the fans don't spin up soon enough because the SMC controller on mine does not work properly and even if you reset it, it reverts back to only spinning the fans after a cpu/gpu temps over 90 degrees Celsius (almost boiling point!).
Mine is currently in for service but I'm being told that they haven't been able to duplicate the issue so I don't understand what method of testing they are using. I hope they don't keep my computer in repair for a long time. I know that if I fire up the Black & White 2 Demo, Call of Duty 4, or Spore and play for about 10-20 minutes the computer crashes if the fans don't spin up... Apple released a firmware update for the SMC controller but it doesn't apply to my model which is a MacBookPro 5,1 , maybe Apple doesn't realize yet how widespread the fan problem even on the late 2008 model is but it needs to be resolved and a third party utility to control the fans should not be necessary on the finest laptops available on the market. I'm confident that they will come up with something...
http://discussions.apple.com/thread.jspa?messageID=9115055&#9115055

Similar Messages

  • Macbook Pro 13" late 2011 crashes when i plug out a "Focusrite Saffire 6 USB" while in sleeping mode.

    Hi Forum,
    I have a problem with my Macbook Pro crashing when i plug out my "Focusrite Saffire 6 USB" while it´s still in sleep mode.
    I do have the latest drivers and updates so is there any way to fix that Problem ( besides not pluging it out while in sleep mode)?

    Man punches himself in the nose. "OW!" he says. He punches himself again. "OW!!" he says. After the sixth or seventh time, he asks a friend how he can stop his nose from hurting.
    "Stop punching yourself in the nose," the friend advises.

  • Problem description: (MacBook Pro 15" late 2008, OSX Yosemite 10.10.2 installed, no pending updates) computer is running very slow - takes 2-3 minutes to open apps such as Pages, even when no other apps are open.  Randomly freezes and becomes unrespo

    Problem description:
    (MacBook Pro 15” late 2008, OSX Yosemite 10.10.2 installed, no pending updates) computer is running very slow - takes 2-3 minutes to open apps such as Pages, even when no other apps are open.  Randomly freezes and becomes unresponsive, requiring forced power down.  Randomly logs off.  Removed Kodak AIO software via Clean My Mac2, but BonjourAgent still there and requesting access.  Cleaned weekly with Clean My Mac2 and running Sophos AntiVirus. 2GB memory installed.  Currently 169.99 GB available of 249.2 GB capacity.
    Help?
    EtreCheck version: 2.1.8 (121)
    Report generated March 21, 2015 at 11:35:35 AM EDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Late 2008) (Technical Specifications)
        MacBook Pro - model: MacBookPro5,1
        1 2.4 GHz Intel Core 2 Duo CPU: 2-core
        2 GB RAM Upgradeable
            BANK 0/DIMM0
                1 GB DDR3 1067 MHz ok
            BANK 0/DIMM1
                1 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 59
    Video Information: ℹ️
        NVIDIA GeForce 9400M - VRAM: 256 MB
            Color LCD 1440 x 900
        NVIDIA GeForce 9600M GT - VRAM: 256 MB
    System Software: ℹ️
        OS X 10.10.2 (14C1514) - Time since boot: 0:13:37
    Disk Information: ℹ️
        Hitachi HTS543225L9SA02 disk0 : (250.06 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 249.20 GB (168.91 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        HL-DT-ST DVDRW  GS21N 
    USB Information: ℹ️
        Apple Inc. Built-in iSight
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple, Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Extensions
        [not loaded]    com.leapfrog.driver.LfConnectDriver (1.11.1 - SDK 10.10) [Click for support]
        [loaded]    com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
        [loaded]    com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.leapfrog.codeless.kext (2) [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [running]    com.kodak.BonjourAgent.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.sophos.uiserver.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.leapfrog.connect.authdaemon.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.sophos.common.servicemanager.plist [Click for support]
    User Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
    User Login Items: ℹ️
        Dropbox    Application  (/Applications/Dropbox.app)
    Internet Plug-ins: ℹ️
        AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
        AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
        AmazonMP3DownloaderPlugin1017265: Version: AmazonMP3DownloaderPlugin 1.0.17 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
        AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User internet Plug-ins: ℹ️
        CitrixOnlineWebDeploymentPlugin: Version: 1.0.94 [Click for support]
        Google Earth Web Plug-in: Version: 6.0 [Click for support]
    Safari Extensions: ℹ️
        AdBlock
        Disconnect
        Add To Amazon Wish List
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Java  [Click for support]
        Tuxera NTFS  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 249.20 GB Disk used: 80.29 GB
        Destinations:
            Backup [Local]
            Total size: 63.67 GB
            Total number of backups: 1
            Oldest backup: 2015-02-23 16:16:08 +0000
            Last backup: 2015-02-23 16:16:08 +0000
            Size of backup disk: Too small
                Backup size 63.67 GB < (Disk used 80.29 GB X 3)
    Top Processes by CPU: ℹ️
             5%    WindowServer
             1%    loginwindow
             0%    AppleSpell
             0%    SophosUIServer
             0%    SophosAntiVirus
    Top Processes by Memory: ℹ️
        118 MB    InterCheck
        101 MB    SophosScanD
        60 MB    Dropbox
        54 MB    mds_stores
        41 MB    SophosAntiVirus
    Virtual Memory Information: ℹ️
        49 MB    Free RAM
        682 MB    Active RAM
        652 MB    Inactive RAM
        315 MB    Wired RAM
        1.49 GB    Page-ins
        2 MB    Page-outs
    Diagnostics Information: ℹ️
        Mar 21, 2015, 11:18:52 AM    Self test - passed
        Mar 21, 2015, 10:53:03 AM    /Library/Logs/DiagnosticReports/SophosUIServer_2015-03-21-105303_[redacted].cra sh
        Mar 19, 2015, 07:59:03 PM    /Library/Logs/DiagnosticReports/CalNCService_2015-03-19-195903_[redacted].crash

    Linc Davis wrote:
    Slow performance after installing Yosemite on an older Mac is often caused by inadequate memory. Although you can install the upgrade on a Mac with 2 GB of memory, experience has shown that at least 4 GB is needed for full performance.
    Select About This Mac from the Apple menu. If you have less than 4 GB of memory, and your model has upgradable memory, install as much as it can take, or at least that much. Any reputable RAM vendor will have a web form in which you can select the Mac model and be directed to compatible parts.
    Memory in the MacBook Air is not upgradable. If that's what you have, you should restore the previous system from a backup, or replace the machine. Ask if you need guidance.
    The Etrecheck report clearly shows that SylvieRose has a Macbook Pro, not a Macbook Air and that there are only 2 GB  RAM installed.  The Etrecheck report can be very informative if one takes the time to examine it. 
    Ciao.

  • Macbook Pro 15" late 2008 random improper shutdowns on battery

    Hi, my macbook pro 15" late 2008 model shuts down by itself when on battery. The problem started one day out of nowhere about 2 months ago. There seems to be no recurring pattern in the shutdowns as I can sometimes use the computer for one or two hours, sometimes only 5 minutes before it shuts down. The computer works perfectly when the charger is plugged in, and also when the battery is pulled out and only the charger is plugged in.
    Here is what I've done so far:
    Reset of the SMC
    Reset of PRAM
    Repair of hard disk and disk permissions with Disk Utility
    Reinstallation of Snow Leopard 10.6.3 from disc and then install of all software updates
    Reinstallation of all updates with the downloadable Combo Update
    None of this fixed the problem.
    I am a student in Glasgow, but normally live in Luxemburg. When I went back to Lux for the holidays I sent the mac for repair at Lineheart Luxemburg. The first time it was returned to me after a week. They hadn't detected the problem because they had only ran the tests with the charger pluggged in. I was quite annoyed as you might understand. All they told me was to buy an 85W charger for the mac as I only had a 60W one. This is my uncles old computer and I don't know why he had the wrong charger. I got the computer a year ago and it had worked flawlessly until now. The 85W charger didn't fix my problem.
    I sent the mac back to Lineheart and they ran a second test for free. They found the problem and all they did was to repair the hard drive with Disk Utility and reinstall Snow Leopard 10.6.3. WHICH I HAD ALREADY DONE MYSELF. This time I was really annoyed. The problem basically occured again straight after I went to get the computer.
    Now I am back in Glasgow and I have an appointment at the Genius Bar tomorrow. I hope they can be of a bit more help although the people at Lineheart are "Apple Mac Certified Technicians" too. I've already spent 140€ for nothing.
    All I really want is to test the computer with another battery since the problem seems to really come from there. However none of the technicians did this and I don't have any friends with a similar model of Macbook.
    The cycle count is at 263 and the status is "normal" for the battery.
    There is a weird problem though, when I plugg in the charger the icon on the top right will first say "not charging" if I unplug the cable at this moment the computer dies. If I leave it in for about a minute it will start calculating the time until full charge. This takes MUCH LONGER than it used to and when it's done I get something silly like 20 hours or 6:30 hours until full charge. After 5-10 minutes it starts calculating again. After a long time I get something more sensible like 1:30 or 2 hours until full charge. Notice that during this entire time, the percentage of the charge will not have change by a single percent. It can sometimes take up to an hour until the battery actually starts charging.
    I've read on different forums that this can be related to the logic board and then my Macbook will just have to become a stationary computer since I can't pay 1200€ to get the logic board replaced. I really hope I just need battery replacement.
    Also, after I turn on the mac again after an improper shutdown my antivirus (avast!) will give me a message "An internal error has occured. You can find more information in the system logs. After filtering for shutdown this is what I found. (sorry for the screenshot, I couldn't find how to copy the log)
    Sorry for this very long description but I wanted you to have all the information. I'm really getting desperate so any help is appreciated even if it's only on how to locate the problem I would be so gratefull. Thank you all.
    Daniel Lecoq

    Yes, I boot up from the OS 10.6.3 installation disc and use Disc Utility to repair Disk and Permissions. I must tell you though, I've done the disc repair and permission repair quite a few times and it has never helped. Right now I've forgotten the OS disc in Luxemburg so I can only get it when I'm back in 3 weeks.
    I ran Disc Utility today though and repaired permissions. The only one that wasn't fixed was an SUID-file.
    I also checked the disc and it has some problems but I can't fix them until I get my OS disc or if I ask them to do it at the Genius Bar.
    Yes, I have a Time Machine backup on an external usb HDD, last time I backed up was yesterday.

  • MacBook Pro, 15" Late 2008, 10.6.7 Model 2,2 2.16 ghz Core 2 Duo

    MacBook Pro, 15" Late 2008, 10.6.7 Model 2,2 2.16 ghz Core 2 Duo
    This condition just sprang up.  Machine not dropped, no new parts added, OS stable, no single or significant change to anything on the box. No new external hardware. 
    Did a restart and the following thing happens:
    When power is initially put to the box, the screen lights up, and it displays a full screen, small checkerboard pattern.  You can see the Apple icon underneath the checkerboard.  The boot circle spins, and then the screen displays grey, and never makes it to blue.
    So I tried to boot up in safe mode.  The same thing happens at the start of the boot sequence, however, after entering the safe mode, the startup proceeds normally, boots to the harddrive, and when the box changes from grey screen to blue screen, the checkerboard on the screen goes away and I have a perfectly good display, with everything working normally (but in the safe mode).
    I have tried the following:
    Boot from Apple CD . . . Still get the checkerboard pattern through grey screen, then as the OS loads, the pattern gets worse, (goes from a full screen pattern, to something like a "two page pattern" and it never gets to blue screen, you can never see the OS desktop.
    Won't boot from USB drive.
    Won't boot from external Dvd drive (Reads the disk, but won't boot, just like the internal drive).
    Already changed RAM, RAM slots, etc.  Nothing plugged into any port.  Everything disconnected. 
    Changed internal harddrives, same thing happens.  Zapped the PRAM, Firmware is good, etc.
    Since this event happens no matter the harddrive, and the box won't startup from the Apple CD, I'm guessing it's a piece of hardware that has gone bad.
    The only thing I can think to do, is to unplug all the different ancillary items, (ethernet, USB, airport, CD, etc), one at a time, off of the motherboard, and keep trying to start up normally in an effort to isolate the hardware that is bad.  In other words, if I unplug the airport card from the motherboard, and the machine starts normally, then I think I would have isolated the problem.  IF it does not start normally, unplug the next sub system, and try it again.
    YEs, I did run Techtool Pro, and etc., and all systems passed.
    Any thoughts ?
    Thanks So much,
    erebus
    Doesn't the safe mode disable all the hardware sub-systems?  IS this why my machine starts in Safe, but won't boot normally ???

    Yes, I boot up from the OS 10.6.3 installation disc and use Disc Utility to repair Disk and Permissions. I must tell you though, I've done the disc repair and permission repair quite a few times and it has never helped. Right now I've forgotten the OS disc in Luxemburg so I can only get it when I'm back in 3 weeks.
    I ran Disc Utility today though and repaired permissions. The only one that wasn't fixed was an SUID-file.
    I also checked the disc and it has some problems but I can't fix them until I get my OS disc or if I ask them to do it at the Genius Bar.
    Yes, I have a Time Machine backup on an external usb HDD, last time I backed up was yesterday.

  • Is it possible to upgrade a macbook pro 15 late 2008 memory upgrade to 8 go

    Hi from Belgium,
    Is it possible to upgrade a macbook pro 15 late 2008 memory from 4 to 8 go. And if yes would i have to replace both memory modules.
    I'm also experiencing problems with the battery. Could you tell me if the new replacement batteries are based on the new techonology (long lasting) or if the replacement battery will be the same as the original one.
    Thanks and have a good day.
    Francis

    Hi CMCSK and thanks.
    Maybe it's because of the SMC reset I've done.
    My computer wasn't responding to the power button when pressed and used to shut down unexpectedly so I did the SMC reset as per the procedure hereafter.
    http://support.apple.com/kb/HT3964?viewlocale=en_US
    So according to you, the battery seems to work properly and doesn't need to be replaced.
    Don't know if it's important but the figures I gave where the one with magsafe connected.
    In fact for the time beeing I only use my computer with magsafe plugged.
    I just unplugged the magpower and here are the new figures after 10 minutes.
    Charge Information:
      Charge Remaining (mAh):          3103
      Fully Charged:          No
      Charging:          No
      Full Charge Capacity (mAh):          3491
      Health Information:
      Cycle Count:          245
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          -1431
      Voltage (mV):          11816
    Are these figures still ok ? Thanks for your help and have a good day.
    Francis

  • User Contributed Tips in The MacBook Pro Display (Late 2008) forum

    *The following User Contributed Tips are located in the MacBook Pro (Late 2008) > The MacBook Pro Display (Late 2008) forum:*
    None at this time.
    *The following related tips are located in other areas of Apple Discussions:*
    a brody - Using a second Mac as a display for a first
    http://discussions.apple.com/thread.jspa?threadID=1587927
    Publish date: July 7, 2008
    See also User Tips Library

    I bought this computer with no disks, upgraded to Lion
    Replacement System Discs can be obtained from Apple's Customer Support - US (800) 767-2775 for a nominal fee. You'll need to have the model and serial number of your Mac available. 
    If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html
    for some reason AHT wasn't installed
    AHT is included in system disc #1. 

  • Can a Macbook Pro from late 2008 upgrade to the most recent OS software? Or will I have to get a new computer in order to have that? Thanks!

    I currently have a Macbook Pro from late 2008 and I'd like to update it to the most current software in order to run newer programs such as Adobe Creative Suite 6. I am not sure if this is even possible but if anyone has any advice or help I would really appreciate it! Thanks!
    MacBook Pro

    The first step in Upgrading... is to Snow Leopard = OS X 10.6.x
    It is Not available as a download... It is a Paid Upgrade.
    Do this first...
    Check that your Mac meets the System Requirements for Snow Leopard...
    Snow Leopard Tech Specs
    http://support.apple.com/kb/SP575
    If so... Purchase a Snow Leopard Install Disc...
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Other countries...
    http://support.apple.com/kb/HE57
    After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
    Be sure to make a Backup of your Current System Before Upgrading...
    Next... See if your Mac can run Mountain Lion...
    Upgrade to Mountain Lion
    With Regard to ML...  Check here for compatibility of 3rd party Software you may be using...
    http://roaringapps.com/apps:table
    You should also consider more RAM... Get the Maximum you can for your Mac...
    It is important to get the Correct and Matching RAM
    See Here  >  OWC RAM  >  http://www.macsales.com

  • HT1338 Can a Macbook Pro from late 2008 upgrade to the most recent OS software? Or will I have to get a new computer in order to have that? Thanks!

    I currently have a Macbook Pro from late 2008 and I'd like to update it to the most current software in order to run newer programs such as Adobe Creative Suite 6. I am not sure if this is even possible but if anyone has any advice or help I would really appreciate it! Thanks!

    The first step in Upgrading... is to Snow Leopard = OS X 10.6.x
    It is Not available as a download... It is a Paid Upgrade.
    Do this first...
    Check that your Mac meets the System Requirements for Snow Leopard...
    Snow Leopard Tech Specs
    http://support.apple.com/kb/SP575
    If so... Purchase a Snow Leopard Install Disc...
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Other countries...
    http://support.apple.com/kb/HE57
    After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
    Be sure to make a Backup of your Current System Before Upgrading...
    Next... See if your Mac can run Mountain Lion...
    Upgrade to Mountain Lion
    With Regard to ML...  Check here for compatibility of 3rd party Software you may be using...
    http://roaringapps.com/apps:table
    You should also consider more RAM... Get the Maximum you can for your Mac...
    It is important to get the Correct and Matching RAM
    See Here  >  OWC RAM  >  http://www.macsales.com

  • My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

    My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

    <http://www.thexlab.com/faqs/sbbod.html>

  • What is the maximum hard drive size can I install into my MacBook Pro 15 "late 2008 ?

    Hello community, I play with the thought in my MacBook Pro 15 "late 2008 equipped with an SSD hard drive. What is the maximum hard drive size can I install? Thank you in advance
    Dirk

    mende1, greetings:
    mende1 wrote:
    I don't recommend you to install a hard drive bigger than 2 TB if you are going to install Windows in Boot Camp or you may have problems
    The largest 2.5" SATA HDDs of 9.5 mm thickness that I am aware of are 1 TB in capacity.  There is a 12.5 mm thick  HDD that will fit some MBPs.  But I have not seen any of larger capacity. 
    Are there now 2 TB HDDs available for MBPs?    If so, I am interested.
    Ciao.
    Both OWC and Crucial have SSDs of about 1 TB capacity.
    Message was edited by: OGELTHORPE

  • Ssd instead of superdrive in a macbook pro 17 late 2008

    i've got a macbook pro 17 late 2008 and want to replace the internal superdrive with an ssd drive. is it a good idea since the interface is pata? is it fast enough to get the speed bump? anybody did that? if yes: any recommendations of the bay?
    thanks, peter

    I bought this computer with no disks, upgraded to Lion
    Replacement System Discs can be obtained from Apple's Customer Support - US (800) 767-2775 for a nominal fee. You'll need to have the model and serial number of your Mac available. 
    If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html
    for some reason AHT wasn't installed
    AHT is included in system disc #1. 

  • MacBook Pro 15" (late 2013) crashes on wake

    Hello!
    This 2 weeks old MacBook Pro 15" (late 2013) randomly crashes on wake from sleep.
    Machine was working fine for about a week, until I first time experienced the issue.
    Since then it has started to happen more and more frequently.
    Here's how it goes:
    I open the lid, see the login screen, it might be unresponsive, if not I type in my password and try to login:
    OSX freezes and might crash & reboot right away
    Or just freeze and I need to manually shutdown by holding down the power button
    Usually on the reboot, following the crash, the drive (Apple SSD sm0512f) with OSX is not found, and I get the blinking folder with question mark inside of it
    I shutdown again, reboot while holding down Option-key to show the boot drive slection menu. I might have to repeat the reboot several times to get the machine find a drive
    I tried to do a full erase and install OSX clean, but the disk utility displays the drive in read only -mode.
    Another thing which happens occasionally:
    While using the machine, the built-in keyboard and/or touchpad becomes unresponsive.
    This might be followed by a crash & reboot. If it doesn't crash, sometimes it helps if I plugin any USB-device,
    such as external keyboard or an iPad, which somehow restores touchpad & kb's functionality.
    I think I am dealing with faulty hardware, and should take the machine to repair. What do you think?
    Anyone had similar issues which were solved by some software fix?

    I'd bring it in, thats what your warranty is for.

  • Multiple Hard Drive Failures on Macbook Pro 15inch (late 2008)

    So I just lost my THIRD hard drive since July on my refurbished Macbook Pro. I was told when the first one failed it was just bad luck. That hard drives fail once in a while. Then in December when the 2nd one died I was told there was no way there was a connection but they would run test on the macbook Pro. Both times I told the genius workers that my Macbook pro runs very very hot at random times (not all the time and I have not had it happen at an Apple store) and that I have many friends with Macs and I have never had a friend macbook get as hot as mine but both times I was told that my macbook could not be getting too hot it would shut off if it got too hot. The 2nd time I was told all the test came back normal and it was just bad luck the 2nd hard drive failed. SO.....
    Anyways so yesterday my hard drive is failing again!!!! Third time! since July!!!
    So my question anyone else having this problem?
    I am sure that there is a problem with the macbook pro that is leading these failures-- but I cannot get an apple genius to believe me. I personally think it is time for Apple to replace my macbook pro if they cannot fully determine the underlying problem. Anyone have these issues?
    I am headed to an apple store tomorrow but it is a 2.5 hour drive (one way) for me and this gets really really old each time I lose a hard drive!!

    A drive can be so badly corrupted that it doesn't work, but be resurrected through repartitioning and reformatting etc, TravisPaul.
    On some occasions, too, I can imagine an over-pressured service department deciding to simply replace a drive rather than go to the trouble of thoroughly troubleshooting it and "not being able" to recover data from it for much the same reasons! It takes less time, though there is no evidence that this is what has happened here, of course, and I wouldn't expect it to occur in an Apple Retail Store.
    The symptoms you report could just as readily involve corruption as failure. Doesn't sound like lack of free space was an issue. Did you attempt any repair processes yourself before taking them in (repairing the disk with Disk Utility or a Safe Boot, checking SMART status, reformatting the drives and re-installing your OS etc?) If three drives have really failed there is either another , undiagnosed, problem or you have been extremely unlucky, but probability being what it is, given the number of these computers in circulation, I guess it must happen every once in a while. Heck, a person I know lost their house in the Australian bushfires last year and then got caught up in the Peruvian mudslides while on a holiday trying to forget about the house! Even lightning really does strike more than once in the same spot occasionally.
    Cheers
    Rod

  • Hi, I have a late October 2008 Macbook Pro Unibody which I wanted to use my Magma Expressbox card with. I had a Silver Macbook Pro before which this worked fine with but for some reason my newer Macbook Pro does not even recognize the Expresscard slot?

    Highly anooying as I can't even use the Express Card slot at all, due to the fact the Macbook doesn't even recognize it exists. Has anyone else had this problem. If so, how was it fixed? I only upgraded my Macbook Pro due to the fact Ineeded a better performance but I still need my Expressbox1 to work with my UAD DSP card. If not the buying the new MAcbook was a total waste of money if the Express Card does not even fundtion on it? Please help!!

    Mavericks is no longer available from the App Store, so your choice is Yosemite. One option is to create a new partition (~30- 50 GB), install the new OS, and ‘test drive’ it. If you like/don’t like it it, you can then remove the partition. Do a backup before you do anything. By doing this, if you don’t like it you won't have to go though the revert process.
    Check to make sure your applications are compatible.
    Application Compatibility
    Applications Compatibility (2)

Maybe you are looking for