MacBook Pro update to Yosemite breaks Magic Mouse

Installed Yosemite today. Magic Mouse instantly broken. It does connect sometimes, but the tracking is sluggish and gestures don't work at all. Worked fine in Mavericks. Batteries @80%.
Re-pairing does NOT work for me. zaping PRAM does NOT work for me.
MacBook Pro (Retina, 15-inch, Early 2013)
2.7 GHz Intel Core i7
16 GB 1600 MHz DDR3
NVIDIA GeForce GT 650M 1024 MB
Is there a solution, patch? How can this be so terribly broken?

Hello,
The problem persist. I have this problem on a macbook pro 13" retina display. Upgraded to Yoseminte and big problem, my Apple Magic did not working anymore. After i replace batteries, restart mac, turn off turn on bluetooth several times, i connect the mouse. But guess what? After i close the lid and i go home, when open the mac again, surprise: NO MOUSE.
Please be serious and get an answer to this issue, both are your products, if APPLE products get errors of communications, what I should expect from others.
People buy Apple for commodity and for less number of problems, in fact Apple products are not so good as you think. So if you have problems like I cannot connect a mouse with a Macbook Pro, then Apple fail.
Guess what, in your Apple stores, people who maybe know some english, don't know to solve this problem, and they told me is a personal problem.
For sure I have personal problem with my mouse...
Thank you for testing Yoseminte before official Launch.
With respect,
Shanaki

Similar Messages

  • Macbook pro 2012 bluetooth problem with magic mouse

    I have a MacBook Pro 2.6 GHz Intel Core i7 running Mac OS X 10.7.4
    It's two days old and Bluetooth has stopped working.. I use bluetooth for my apple magic mouse.
    I know it's the Bluetooth app and not the mouse as I changed the mouse batteries and double checked it with my old iMac.
    The Bluetooth app has become sluggish and unresponsive.
    I have restarted and logged out and in.
    Run permissions.
    Switched Bluetooth off and on.
    Scratched my beard.
    Any ideas or similar problems?

    Not sure which Bluetooth app you are referring to ... 
    Try deleting Bluetooth preferences ...
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type this exactly as you see it here:
    /LIbrary/Preferences
    Click Go
    Move the   com.apple.Bluetooth.plist   file from the Preferences folder to the Trash.
    Now open System Preferences > Bluetooth and try re "pairing" the mouse.

  • My new MacBook Pro Bluetooth is intermittent with Magic Mouse and music

    Bluetooth keeps disconnecting then reconnecting randomly... Both music and Magic Mouse. Any ideas... THANKS, your friend in Ohio...

    Hello Ohio friend
    Try making the devices favorites.
    Also, I would reset the PRAM and SMC.
    Barry

  • Why won't my macbook pro update to yosemite

    I currently have snow leopard (10.6.8), and have tried to download Yosemite through the app store, selected software update, my computer will restart but it will not update. Is it too old to download Yosemite? I got it in 2011.

    Capacity : 319.73 GB (319,728,959,488 Bytes)
    Available : 203.49 GB (203,490,934,784 Bytes)
    Used : 116.24 GB (116,238,024,704 Bytes)
    I am also trying to download it from the app store again and usually the bar at the bottom never moves and it just doesn't download, but now it is about half full, so I'll see what happens with that as well, but if it doesn't work what do I do?

  • Recently updated iMac and macbook pro to mountain lion.   Now mouse and track pad operate backwards i.e.  scroll up and page scrolls down. how do you fix this?

    recently updated iMac and macbook pro to mountain lion.   Now mouse and track pad operate backwards i.e.  scroll up and page scrolls down. how do you fix this?

    System Preferences > Mouse -- deselect "Scroll direction: natural." Do the same for the trackpad > Scroll & Zoom preference.

  • After upgrading iPhoto on my MacBook Pro running OSX Yosemite 10.10.3 it continually keeps asking me that it is preparing library. This has happened 5 times now and I can't access my photo's through iPhoto, any suggestions?

    After upgrading iPhoto on my MacBook Pro running OSX Yosemite 10.10.3 it continually keeps asking me that it is preparing library. This has happened 5 times now and I can't access my photo's through iPhoto, any suggestions?

    There is no upgrade to iPhoto with OS X 10.10.3 - here was an update to version 9.6.1 a few months ago and Photo 1.0 was added with 10.10.3 - what software and which version are you having trouble with - iPhoto or Photos?
    LN

  • IPad doesn't synch iPhoto events in chronologic order.. what to do? I'm on MacBook Pro, OS X Yosemite 10.10.1 with iPhoto 9.6 - Solution anyone?... Thanks!

    iPad doesn't synch iPhoto events in chronologic order.. what to do? I'm on MacBook Pro, OS X Yosemite 10.10.1 with iPhoto 9.6 - Solution anyone?... Thanks!

    Solution anyone?...
    Wait for an iOS update and send feedback to Apple. Many have reported that problem here - synced events and faces in arbitrary order, but there is no known solution.  You cannot arrange the synced events, albums, and faces on your iOS devices in any way.
    You can use this feedback form to submit a feature request:  http://www.apple.com/feedback/iphoto.html

  • I think i have a virus on my Macbook Pro, OS X Yosemite, how do i wipe my computer clean without erasing photos and music etc?

    i think i have a virus on my Macbook Pro, OS X Yosemite, how do i wipe my computer clean without erasing photos and music etc?

    The update alerts are fake, and are intended to dupe you into installing malware or disclosing private information so that your identity can be stolen.
    You might get the alerts when visiting a website that has been hacked. Don't visit the site again. If applicable, notify the site administrator of the problem, but don't send email to an unknown party.
    If you get the alerts when visiting more than one well-known website, such as Google, YouTube, or Facebook, then they may be the result of an attack on your router that has caused you to get false results from looking up the addresses of Internet servers. Requests sent to those sites are redirected to a server controlled by the attacker. It's possible, but less likely, that the DNS server used by your ISP has been attacked.
    Back up all data.
    Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
              8.8.8.8
              8.8.4.4
    That's Google DNS. Click OK, then Apply.
    In Safari, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. If you’re using another browser, empty the cache. Test. If the fake update alerts stop, see below. Otherwise, ask for instructions.
    The router's documentation should tell you how to reset it to the factory default state. Usually there's a pinhole switch somewhere in the back. It may be labeled "RESET." Insert the end of a straightened paper clip or a similar tool and press the button inside for perhaps 15 seconds, or as long as the instructions specify.
    After resetting the router, quit the web browser and relaunch it while holding down the shift key. From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. Do the equivalent if you use another browser. Open the Downloads folder and delete anything you don't recognize.
    Then go through the router's initial setup procedure. I can't be specific, because it's different for every model. The key points are these:
    1. Don't allow the router to be administered from the WAN (Internet) port, if it has that option. Most do.
    2. Set a strong password to protect the router's settings: at least ten random upper- and lower-case letters and digits. Don't use the default password or any other that could be guessed. Save the password in your keychain. Any password that you can remember is weak.
    3. If the router is wireless, or if you have a wireless access point on the network, use "WPA 2 Personal" security and set a different strong password to protect the network. If the router or access point doesn't support WPA 2, it's obsolete and must be replaced.
    During the time the router was compromised, you were redirected to bogus websites. If you ever connected to a secure site and got a warning from your browser that the identity of the server could not be verified, and you dismissed that warning in order to log in, assume that your credentials for the site have been stolen and that the attacker has control of the account. This warning also applies to all websites on which you saw the fake update alerts.
    Check the router manufacturer's website for a firmware update.
    If you downloaded and installed what you thought was a software update, ask for instructions.

  • After upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down then restore power to get it to function.

    after upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down and restore power for it to function. Also cannot send email from mac mini or iPad.

    after upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down and restore power for it to function. Also cannot send email from mac mini or iPad.

  • MacBook Air and MacBook Pro Update 2.0 download link broken

    The MacBook Air and MacBook Pro Update 2.0 download link is broken on http://support.apple.com/kb/DL1609. Anyone have the dmg? I know it's on the Mac App Store, but I need the dmg.

    Nobody who have macbook retina don't ahve this problem?

  • MacBook Air and MacBook Pro Update 2.0

    A new update was released today for june 2012 macbook pro'ss/air's. Is anyone else hoping for gaming improvements/improved nvidia drivers? I just updated but havent had a chance to test anything yet. I would also be interested in seeing if battery life improved at all.
    About MacBook Air and MacBook Pro Update 2.0
    This update includes graphics performance and reliability enhancements and improves compatibility with some USB devices.
    This update is recommended for all Mac notebooks introduced in June 2012.
    Source: http://support.apple.com/kb/DL1609

    jbinnyc wrote:
    Could this update do anything to the color settings? I swear my 15" MacBook Retina looks more washed out after the update. Can I undo it via time machine?
    System Preferences > Display
    click colors > click calibrate

  • After prompted to update 10.9.1, my MacBook Pro updates and went thru restart but failed...I tried to start my book and gray screen, Apple logo both on, chime sounded, then went to progress bar, less than half macbook shuts down...did few times, same!!

    After prompted to update 10.9.1, my MacBook Pro updates and went thru restart but failed...I tried to start my book and gray screen, Apple logo both on, chime sounded, then went to progress bar, less than half macbook shuts down...did few times, same!!
    Go to system repair, there is a prompt that cannot repair live etc....I don understand!!! Help, I need the book for work tomorrow!!

    Thanks clintonfrombirmingham...
    After clicking "repair disk" it says DISK UTILITY STOPPED REPAIRING MACINTOSH HD, DISK UTILITY CAN't REPAIR THIS DISK. BACK UO AS MANY OF YOUR FILES AS POSSIBLE, REFORMAT THE DISK, AND RESTORE YOUR BACKED -UP FILES....
    written in red: ERROR: DISK UTILITY CAN'T REPAIR THIS DISK,,,DISK, AND RESTORE YOUR BACKED-UP FILES.
    how can I back up when I cannot even start my macbook? I am stuck here and have lots of important files in the hd... Please help me? Thanks you!

  • HT1153 I turned my macbook off maanually last night.  Magic mouse was working fine.  When I turned ir back on the mouse did not work.  I do not have the option of Bluetooth in my system preferences.  I have no  idea how to resolve this problem.

    I turned my macbook off manually last night.  Magic mouse was working fine.  When I turned it back on it wasn't working.  I have no option in system preferences for Bluetooth.  I have no clue how to get it working again.  The batteries in the mouse are working fine.

    Try resetting the SMC.
    Barry

  • Macbook Pro, update to Mavericks - internet sharing unstable (ethenet - WiFi)

    Macbook Pro, update to Mavericks ->internet sharing unstable (ethenet -> WiFi)

    Thanks, indeed there's not a lot there.
    I was thinking that there might be a network reset option on my Snow Leopard Mac Book, like I've had a to do a time or two on my iOS devices that suddenly stop seeing the internet. Since I didn't know what that is, I set up a clean TEST user account. Unfortunately, it doesn't seem to change anything, so perhaps the internet network settings are global. Any ideas how to reset the network settings and clear them out completely?
    Hard to believe that there could be something so different between Mavericks and Snow Leopard as far as common network protocols are concerned that allows one to be plug and play and the other to connect to the network but not see the internet. Could it be the hardware? A 2007 MacBook vs. a 2011 MacBook Pro?

  • Is it possible to have Safari and Google Chrome simultaneously on my MacBook Pro OS X Yosemite, is it possible to have Safari and Google Chrome simultaneously on my MacBook Pro OS X Yosemite

    Is it possible to have both Safari & Google Chrome on my Macbook Pro OS X Yosemite?

    Yes.

Maybe you are looking for

  • Error in SQL Statement: SAPSQL_INVALID_TABLENAME

    Hello all, While displaying contents of infocube i am getting strange error .. Error in SQL Statement: SAPSQL_INVALID_TABLENAME ABC Message no. DBMAN256 ( Table name length is 16 ) I am able to see the contents of Fact table. Could not found any solu

  • Menu problem with IE

    menu problems with IE connected with spry - see site: 1. http://www.whatwomenwant-tv.com/index.html (horizontal menu bar - will not display fully, probably to do with flash) 2. http://www.whatwomenwant-tv.com/about.html (horizontal menu bar swerves t

  • Getting Data from SAP ECC & BI to Crystal Reports and then Broadcasting.

    Hi, I need to get the data from SAP ECC & BI to Crystal reports and then after formating data in Crystal reports, my requierment is to send via email (Broadcasting). Is there any option to  Broadcast from Crystal reports? I read Ingo Hilgefort blogs,

  • This entry already exists in the following tables JDT1

    I try to create any document which creates a Journal Entry (Invoice, Credit Memo, Stock transfer, etc ) and SBO2007 SP 01 PL 09 and these error occurs and these error message occurs: This entry already exists in the following tables "(JDT1) -(ODBC -

  • Safari 4 won't open

    I upgraded to Safari 4 on June 12. At first it was slow, then later in the evening it worked fine. The next morning it would not open and has not opened since. I repaired permissions and verified the disc both before and after. I removed Silverlight