Macbook pro updated on lion 10,7,2

After this update (Lion 10,7,2) ,i still have the same problem
Each time i use mission control or after the second atempt i get the black
screen and the mac is restarting
I dont know if this problem is because of my installation or Lion does it

You are asking a notebook question in the Mac Pro forum. You need to be here:
MacBook Pro: Notebooks: Apple Support Communities

Similar Messages

Brand new MacBook Pro updated to Lion now it is so slow

Hi Everyone,
I have just purchased a brand new MacBook Pro, upon setting it up it promted me to update software which I did so it's currently running Mac OS X Lion 10.7.3. My server provider is Optus and I live in the heart of Sydney.
I am new to the world of Mac's so don't really know wether my problem is opertator caused or not...How ever I currently have such slow internet I am unable to even watch you tube videos. It takes over a minute just to load pages and I am feeling a huge amount of frustration as I have a brand new computer and am on an expensive all inclusive package by one of the most recognised providers in Australia yet am getting rediculously slow internet.
Can anyone suggest what the cause of this may be and and changes I should make.
Thanks

lhmac wrote:
Hi Everyone,
I have just purchased a brand new MacBook Pro, upon setting it up it promted me to update software which I did so it's currently running Mac OS X Lion 10.7.3. My server provider is Optus and I live in the heart of Sydney.
I am new to the world of Mac's so don't really know wether my problem is opertator caused or not...How ever I currently have such slow internet I am unable to even watch you tube videos. It takes over a minute just to load pages and I am feeling a huge amount of frustration as I have a brand new computer and am on an expensive all inclusive package by one of the most recognised providers in Australia yet am getting rediculously slow internet.
Can anyone suggest what the cause of this may be and and changes I should make.
Thanks
Have you installed any programs since you got the Mac? Also look to the right of the page and you'll see a list of posts under 'More Like This'. Have a read trough them to se if you can find solutions on issues similar to yours.
Pete

HT1338 I updated my MacBook Pro with Mountain Lion and now it is starting slow and opening with some of the programs. How can I fix the problem?

I updated my MacBook Pro with Mountain Lion and now it is slow in starting up and loads a number of probrams. How can I fix the problem?

Have you tried starting in Safe Mode and see if the slowness still occurs?
Restart holding the "shift" key.
(Expect it to take longer to start this way because it runs a directory check first.)
If this works look in System Preferences > Users & Groups > Login items and delete any third party login items (-), you can always add them back with the (+). Also look in /Library/Startup Items. Nothing is put in that folder by default, so anything in there is yours.
Reboot normally and test.

Can't install from application install dvd and i can't update to 10.6.8 after i restore my macbook pro from mountain lion

can't install from application install dvd and i can't update to 10.6.8 after i restore my macbook pro from mountain lion. when restart and i press command it still has recovery mountain lion show on my screen.

What model is the MBP? Did it come with OS 10.6 or a later OS? Is the install DVD one that came with it or something else?
You can't run an OS older than Mac on it.
But if came with 10.6 installed & you have the system discs, you should be able to erase the drive & reinstall the original OS.

HT1338 Dear all, I have just bought a MacBook pro with osx lion on 25thast month. I wanted to know if I can use the methods described above to update to osx mountain lion or I have to buy osx mountain lion from the app store?

Dear all, I have just bought a MacBook pro with osx lion on 25th last month. I wanted to know if I can use the methods described above to update to osx mountain lion or I have to buy osx mountain lion from the app store?

Here are the rules to qualify for the free upgrade:
http://www.apple.com/osx/uptodate/
(has to be purchased from Apple or authorized reseller).

Recently updated iMac and macbook pro to mountain lion. Now mouse and track pad operate backwards i.e. scroll up and page scrolls down. how do you fix this?

recently updated iMac and macbook pro to mountain lion. Now mouse and track pad operate backwards i.e. scroll up and page scrolls down. how do you fix this?

System Preferences > Mouse -- deselect "Scroll direction: natural." Do the same for the trackpad > Scroll & Zoom preference.

I can't update my existing firefox 8.0.1 to 9.0.1 on my new MacBook Pro OS X Lion (patch apply failed)?

I can't update my existing firefox 8.0.1 (when prompted by updater) to 9.0.1 on my new MacBook Pro OS X Lion. Update failed with 'patch apply failed' message.

resolved

Why does safari not update to 5.1 on macbook pro when running lion 10.7.1

my macmini is running lion server and safari 5.1. my iMac is running lion and safari 5.1. my macbook pro is running lion and safari 4.0.4 and update is stating that there are no updates available.
how does one force an update to safari 5.1 for lion in this situation?

my macbook pro is running lion and safari 4.0.4 and update is stating that there are no updates available.
Did you move or copy the Safari application? It should be in the Applications folder at the top level of your startup volume.
There is no downloadable installer for the Lion version of Safari.

IPhoto update to 9.4.1 after updating MacBook Pro to Mountain Lion

Hello.
I updated my MacBook Pro to Mountain Lion and iPhoto to 9.4.1, but the Mac App Store still shows a "1 update available" notification, but when I open the App Store, next to iPhoto it says "Installed". How do I get rid of the "1 update available" notification ?
Thanks for your help,
Antonio

Addendum to my post above (I'm past the window to edit my original post). Here is a screen shot (cick image to enlarge/read) of the multiple iPhoto 9.4 updates installed yet the App Store still insists that my installed version needs updating. I'm completely befuddled on this one.
Message was edited by: Fox8

HT1619 How do I disconnect an Apple remote from my MacBook Pro w/ Mountain Lion update?

My friend set up Apple TV while I was using my laptop in the same room and the remote is now connected to my laptop. I've looked at a bunch of different sites and forums trying to figure out how to disconnect it and it seems that with the new Mountain Lion operating system, there is no way to do this. PLEASE HELP it's driving me crazy because everytime he presses a buttom on the remote, it interferes with what I'm doing.

Sorry, but my late 2009 MacBook Pro running Mountain Lion continues to be be controlled by the ATV2 remote after disabling remotes in system preferences. Anyone else having the issue or has a solution?
Cheers!

Connect my new Macbook Pro with Mountain Lion to my HP PhotoSmart B210

How can I connect my new MacBook Pro with Mountain Lion to my hp b210 printer? My printer is about 1.5 years old and works wirelessly just fine with my PC. I just switched to mac. The printer is supposed to be airprint compatible according to HP. HP has no software drivers for me to download. Instead they say to use Mac Software Update to get the software. However, there are no updates when I try that. I have tried adding the printer manually using it's IP address and can print a test page, but when I try to print using an application on the Mac it cannot find the printer or says the printer is in use. Help!!!

Are you sure it has no usb port?
http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/18972-18972-238444-421635-410635-4 021933.html?dnr=1
Connectivity, standard
1 USB (2.0); 1 Wireless 802.11b/g/n
The usb cable you need looks like:

HT1338 Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

If you look at the User Tips tab, you will find a write up on just this subject:
https://discussions.apple.com/docs/DOC-4053
The subject of buying/selling a Mac is quite complicated. Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
SELLING A MAC A
Internet Recovery, and Transferability of OS & iLife Apps
Selling an Old Mac:
• When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
• Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
Internet Recovery:
• In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
• Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
iLife Apps:
• When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
• Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
• It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
SELLING A MAC B
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

Is the Dell 3115CN compatible with a Macbook Pro running Mountain Lion? If so, how can I install the drivers and install the printer on my mac?

I hace a Macbook Pro running Mountain Lion OS.... I need to print from time to time but don't have a new printer to go with my new macbook. Would a 3115CN work with it or no? If so, how can I set it up? Setting up a printer on a mac is a bit different from doing so on a windows machine and I am new to the macworld.
All help would be greatly appreciated.

Yes. I'm running this printer from 10.6 through 10.9 and it's worked fine with all versions. Dell released updated drivers a while ago that make it much easier to administer this printer.

I bought a macbook pro with Mountain Lion installed. Can I install a copy of mountain lion on my other mac for free?

I bought a Macbook pro with Mountain Lion. Can I install Mountain Lion on my other mac for free? How do I do that? Thanks!

On the bright side, it's only $20.
And I would certainly like to have the ownership (and even a copy of the installer on my archive drive), "just in case."
Here are some questions -- which I cannot test because it's not my situation:
Has anyone acquired a pre-owned Mac with Mountain Lion installed but which shipped with an earlier OS version? For those in that circumstance:
Have you been able to apply Mountain Lion update(s)?
How about reinstall ML with Recovery HD?
After either updating or reinstalling, does ML appear in Purchases in App Store?
Just curious.

What is the best application to optimize my Macbook Pro running Mountain Lion???

What is the best application to optimize my Macbook Pro running Mountain Lion???

Kappy's Personal Suggestions About OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utility is: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption. Drive Genius provides additional tools not found in Disk Warrior for defragmentation of older drives, disk repair, disk scans, formatting, partitioning, disk copy, and benchmarking.
Four outstanding sources of information on Mac maintenance are:
1. OS X Maintenance - MacAttorney.
2. Mac maintenance Quick Assist
3. Maintaining Mac OS X
4. Mac Maintenance Guide
Periodic Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) See Mac OS X- About background maintenance tasks. If you are running Leopard or later these tasks are run automatically, so there is no need to use any third-party software to force running these tasks.
If you are using a pre-Leopard version of OS X, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced after Tiger. (These utilities have limited or no functionality with Snow Leopard, Lion, or Mountain Lion and should not be installed.)
Defragmentation
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive except when trying to install Boot Camp on a fragmented drive. But you don't need to buy third-party software. All you need is a spare external hard drive and Carbon Copy Cloner.
Cheap and Easy Defragmentation
You will have to backup your OS X partition to an external drive, boot from the external drive, use Disk Utility to repartition and reformat your hard drive back to a single volume, then restore your backup to the internal hard drive. You will use Carbon Copy Cloner to create the backup and to restore it.
1. Get an empty external hard drive and clone your internal drive to the
       external one.
2. Boot from the external hard drive.
3. Erase the internal hard drive.
4. Restore the external clone to the internal hard drive.
Clone the internal drive to the external drive
1. Open Carbon Copy Cloner.
2. Select the Source volume from the left side dropdown menu.
3. Select the Destination volume from the left side dropdown menu.
4. Be sure the Block Copy button is not depressed or is ghosted.
5. Click on the Clone button.
Destination means the external backup drive. Source means the internal startup drive.
Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive and click on the upward pointing arrow button.
After startup do the following:
Erase internal hard drive
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your internal hard drive (this is the entry with the
       mfgr.'s ID and size) from the left side list. Note the SMART status of the
       drive in DU's status area. If it does not say "Verified" then the drive is
       failing or has failed and will need replacing. SMART info will not be
       reported on external drives. Otherwise, click on the Partition tab in the
       DU main window.
3. Under the Volume Scheme heading set the number of partitions from the
       drop down menu to one. Set the format type to Mac OS Extended
       (Journaled.) Click on the Options button, set the partition scheme to
       GUID then click on the OK button. Click on the Partition button and wait
       until the process has completed.
Restore the clone to the internal hard drive
1. Open Carbon Copy Cloner.
2. Select the Source volume from the left side dropdown menu.
3. Select the Destination volume from the left side dropdown menu.
4. Be sure the Block Copy button is not selected or is ghosted.
5. Click on the Clone button.
Destination means the internal hard drive. Source means the external startup drive.
Note that the Source and Destination drives are swapped for this last procedure.
Malware Protection
As for malware protection there are few if any such animals affecting OS X. Starting with Lion Apple has included built-in malware protection that is automatically updated as necessary.
Helpful Links Regarding Malware Protection:
1. Mac Malware Guide.
2. Detecting and avoiding malware and spyware
3. Macintosh Virus Guide
For general anti-virus protection I recommend only using ClamXav, but it is not necessary if you are keeping your computer's operating system software up to date. You should avoid any other third-party software advertised as providing anti-malware/virus protection. They are not required and could cause the performance of your computer to drop.
Cache Clearing
I recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc. Corrupted cache files can cause slowness, kernel panics, and other issues. Although this is not a frequent nor a recurring problem, when it does happen there are tools such as those above to fix the problem.
For emergency cleaning install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. (AppleJack works with Snow Leopard or earlier.)
Installing System Updates or Upgrades
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Backup and Restore
Having a backup and restore strategy is one of the most important things you can do to maintain your computer. Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner.
2. Deja Vu
3. SuperDuper!
4. Synk Pro
5. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance and backup and restore.
Always have a current backup before performing any system updates or upgrades.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity or 20 GBs, whichever is greater, as free space. Avoid installing utilities that rely on Haxies, SIMBL, or that alter the OS appearance, add features you will rarely if ever need, etc. The more extras you install the greater the probability of having problems. If you install software be sure you know how to uninstall it. Avoid installing multiple new software at the same time. Install one at a time and use it for a while to be sure it's compatible.
Additional suggestions will be found in:
1. Mac OS X speed FAQ
2. Speeding up Macs
3. Macintosh OS X Routine Maintenance
4. Essential Mac Maintenance: Get set up
5. Essential Mac Maintenance: Rev up your routines
6. Five Mac maintenance myths
7. How to Speed up Macs
8. Myths of required versus not required maintenance for Mac OS X
Referenced software can be found at CNet Downloads or MacUpdate.

Macbook pro updated on lion 10,7,2

Similar Messages

Maybe you are looking for