Macbook Pro updates help!

Hello all, Merry Christmas first of all.
Need a bit of help. its running Mac OS X 10.5.8, i tried to do a software update but its all very confusing. the laptop is a 2008 new style MBP. Every time i try to software update it tells me i need to run a newer software. Im starting to wonder if i need to buy an upgrade disk ?. It wont let me update itunes running this version either ?
All help will be greatly appreciated.
Thanks Kimberly

There is no update from 10.5.8(Leopard). You need to "upgrade" to Snow Leopard or later(10.6.8.). This is a paid upgrade, & you can purchase such from Apple's online store. Cost is US $19. Once you do that you can then update iTunes.

Similar Messages

After prompted to update 10.9.1, my MacBook Pro updates and went thru restart but failed...I tried to start my book and gray screen, Apple logo both on, chime sounded, then went to progress bar, less than half macbook shuts down...did few times, same!!

After prompted to update 10.9.1, my MacBook Pro updates and went thru restart but failed...I tried to start my book and gray screen, Apple logo both on, chime sounded, then went to progress bar, less than half macbook shuts down...did few times, same!!
Go to system repair, there is a prompt that cannot repair live etc....I don understand!!! Help, I need the book for work tomorrow!!

Thanks clintonfrombirmingham...
After clicking "repair disk" it says DISK UTILITY STOPPED REPAIRING MACINTOSH HD, DISK UTILITY CAN't REPAIR THIS DISK. BACK UO AS MANY OF YOUR FILES AS POSSIBLE, REFORMAT THE DISK, AND RESTORE YOUR BACKED -UP FILES....
written in red: ERROR: DISK UTILITY CAN'T REPAIR THIS DISK,,,DISK, AND RESTORE YOUR BACKED-UP FILES.
how can I back up when I cannot even start my macbook? I am stuck here and have lots of important files in the hd... Please help me? Thanks you!

HT1338 i lost my dvd and i want to install mac os on my macbook pro please help

i lost my dvd and one of my friends install a strange os can't update or install some apps please i want to install my mac os on my macbook pro please help ?

Replacement System Discs can be obtained from Apple's Customer Support - US (800) 767-2775 for a nominal fee. You'll need to have the model and serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html

I am running Lion on both my Macbook Pro and iMac. Outlook 2011 bombs out and does not even open on my iMac but works perfectly on my Macbook Pro. Help please.

I am running Lion on both my Macbook Pro and iMac. Outlook 2011 bombs out and does not even open on my iMac but works perfectly on my Macbook Pro. Help please.

Check for updates by running MS Office Update directly from:
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
(Open Finder, ⇧⌘G, paste in the above and click)

My external hard disk not working properly in my macbook pro . anyone help me . its seagate hard disk

My external hard disk not working properly in my macbook pro . anyone help me . its seagate hard disk

You need to get some software that allows your Mac to read and write to the NTFS disk. There's a whole bunch of stuff out there, but this program has a good review, and you can try it for free. I would move everything off of your external drive, reformat it into Mac OSX extended, and use it for your Mac. You don't need NTFS anymore, unless you still have a Windows computer that needs it.

MacBook Air and MacBook Pro Update 2.0 download link broken

The MacBook Air and MacBook Pro Update 2.0 download link is broken on http://support.apple.com/kb/DL1609. Anyone have the dmg? I know it's on the Mac App Store, but I need the dmg.

Nobody who have macbook retina don't ahve this problem?

MacBook Air and MacBook Pro Update 2.0

A new update was released today for june 2012 macbook pro'ss/air's. Is anyone else hoping for gaming improvements/improved nvidia drivers? I just updated but havent had a chance to test anything yet. I would also be interested in seeing if battery life improved at all.
About MacBook Air and MacBook Pro Update 2.0
This update includes graphics performance and reliability enhancements and improves compatibility with some USB devices.
This update is recommended for all Mac notebooks introduced in June 2012.
Source: http://support.apple.com/kb/DL1609

jbinnyc wrote:
Could this update do anything to the color settings? I swear my 15" MacBook Retina looks more washed out after the update. Can I undo it via time machine?
System Preferences > Display
click colors > click calibrate

Is there an adapter to hook up a firewire from a cannon gl2 to a MacBook Pro? The firewire end is too big to fit in the MacBook Pro laptop help.

Is there an adapter to hook up a firewire from a cannon gl2 to a MacBook Pro? The firewire end is too big to fit in the MacBook Pro laptop help.

After identifying the exact connectors you need, check the Apple Store online and/or eBay...you should be able to buy a cable with the correct connector on each end, rather than fooling with an adapter.

I have just upgraded to the new OS X V. 10.10.3 but cannot access my iCloud Drive documents using the resident Pages and Numbers software on my MacBook Pro. Help needed.

I have just upgraded to the new OS X V. 10.10.3 but cannot access my iCloud Drive documents using the resident Pages and Numbers software on my MacBook Pro. Help is needed to access those documents using the resident software on my MacBook Pro rather than the Beta software on iCloud.com.

I have iCloud Drive set on the Finder sidebar and use that to open the Numbers Spreadsheet on iCloud.
OSX 10.10.3
Best.

Hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.

hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.

hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.

Macbook Pro, update to Mavericks - internet sharing unstable (ethenet - WiFi)

Macbook Pro, update to Mavericks ->internet sharing unstable (ethenet -> WiFi)

Thanks, indeed there's not a lot there.
I was thinking that there might be a network reset option on my Snow Leopard Mac Book, like I've had a to do a time or two on my iOS devices that suddenly stop seeing the internet. Since I didn't know what that is, I set up a clean TEST user account. Unfortunately, it doesn't seem to change anything, so perhaps the internet network settings are global. Any ideas how to reset the network settings and clear them out completely?
Hard to believe that there could be something so different between Mavericks and Snow Leopard as far as common network protocols are concerned that allows one to be plug and play and the other to connect to the network but not see the internet. Could it be the hardware? A 2007 MacBook vs. a 2011 MacBook Pro?

Upgraded to 10.8.3 and now having start up problems on MacBook Pro. Help?

Upgraded to 10.8.3 and now having start up problems on MacBook Pro. Help?

Please elaborate. What do you mean by "start up problems" ? How far does it get?
Chime? Fans? gray screen? Dark Apple? spinner? spinner spins for usual amount of time and screen goes dark? question mark? tones? flashing power light? smoke? what?

After macbook pro update 1.0, OS X won't load.

So I just tried to apply the MacBook Air and MacBook Pro Update 1.0 to my brand new MBP 15.4 and the screen went black when I pressed restart. Then I got a message stating that the update failed and could not be applied. So, I restarted, got to the login screen, logged in and it seemed like the desktop came up, except I couldn't launch anything. The dock was missing, couldn't figure out how to get it visible, my desktop background was missing, launchpad won't come up or mission control either.
So, figuring a reboot might fix it, I restarted from the apple menu and... nothing. I get to the grey screen with the apple logo and the spinner below it and that's it. It just sits there spinning forever, doing nothing, until I hold down the power button to shut down the MBP. So, I currently have a MBP that doesn't work. What should I do? I need to get this thing working for my job or I am screwed. Someone please assist!

*Update*
Tried Perform a Safe Boot didn't work.
Tried Reset the NVRAM / PRAM didn't work.

Installed MacBook Pro Update 2.0 *Problems Now*

Software update asked to install MacBook Pro Update 2.0 and now my MacBook Pro 13 2.5 i5 16gb Ram fails to wake from sleep when I open the lid, machine also hans with beachballs when tasking the Finder, switching applications, opening and closing them.
I have tried to repaid disk permissions, resetting PRAM, and booting with extentions disabled, the system still exhibiting the same problem.
Anyone have an idea how to get this fixed without wiping the Mac?
Anyone else experiancing this problem ?
Thanks.

Yes as I mentioned in the first post, I did try that.
Apple told me I would have to ship the computer on my dime ( for the second time ) because they do not offer shipping exchange in Canada.
This is the second time I will have to pay the shipping cost for repairs on this laptop; it basically will have added $125 to the price.
Really unhappy.
Probably will be my last Mac.

MacBook Pro Update 2.0 on MBP15R both HDMI and internal displays go black and useless

I installed MacBook Pro Update 2.0. When I plug in an HDCP-capable HDMI monitor the MBP15R's screen promptly goes all-black and useless (except for a cursor arrow, which moves but does nothing) and the external display mirrors the same thing. (The internal screen transitions through an all-blue screen first.)
How do I get my screens back? MBP15R is mostly useless to me this way. It worked fine before update 2.0. How do I get this fixed?

I'm still reluctant to give up on that bricked machine... Since it is able to display part of the boot up messages of the arch install cd and the previously working installation showed everything until loading of the virtual console (at least that's what I believe it did when the screen went black), it looks to me that the problem lies in initializing a different graphical output. That would also explain why I was able to initialize X only with the fbdev driver... and the screen didn't flicker during boot-up when I did radeon.modeset=0 so I assume it stayed on framebuffer mode all along.
Does anyone know of a boot medium that boots into framebuffer video mode even though a GPU is present? All I'd need is a bash or similar shell. I can load into the UEFI shell with arch install CD, but I'm not familiar with that shell and it follows a different syntax than I am used to, as it is designed for an entirely different purpose. If anyone knows a boot medium that does not try to pipe the graphical output through the gpu (or the integrated i915 graphics). Must be something like this around?
Last edited by halogene (2013-05-31 08:16:13)

Macbook Pro updates help!

Similar Messages

Maybe you are looking for