MacBook Pro USB Audio Device Issues

Hello,
     I am currently using a MacBook Pro 2012 model and I am having trouble with connecting an audio import source via USB cable. The device I am trying to connect is a pair of Astro A40 headset with the MixAmp. According to various sources, the amp needs to be plugged in into a USB port. I have seen this done and when they go to System Preferences > Sound  the device is shown. Unfortunately, I follow the same procedure as the one found on various sites and my computer is not recognizing that anything has been plugged in. I have tried both USB ports and nothing seems to be working.
     Anyone ever hear anything about the newest model of MacBook having troubles with detecting audio devices via USB ports? Any help would be greatly appreciated.
Thanks,
Michael

So far as the Go Pro connectivity, it was an issue on the Go Pro end. In order for the Go Pro to be found, I needed to remove all accesories. iPhoto still does not pick it up, although Finder did.
Flash Drives still not found.
Odd as I remember I used to be able to just plug in a device that had anything to do with pictures or videos and iPhoto would just automatically detect it and ask to import.

Similar Messages

  • Windows 7 x64 USB AUDIO DEVICE - Device Not Working - Mac Pro

    I have a mac pro early 2009. I had vista x64 installed, everything was great. I had 2 audio devices under device manager, one was listed as HD (digital) and one device was listed as analog audio.
    When I played games and wanted the external speakers (using the digital out connection) I had the HD (digital) audio device enabled.
    When I played games and wanted to use a headphone/microphone combo, I had the analog audio device enabled.
    Switching between the two was as easy as clicking the audio device icon and clicking on whichever device I wanted.
    Now that I installed windows 7 x64, I have a HD (optical out) device in device manager and it works perfectly. Unfortunately, I also have another device listed called "USB Audio Device" and it shows a yellow exclamation mark next to it and it is NOT working properly.
    I tried many suggestions on here, which included downloading the cirrus logic audio driver and picking different models, as well as trying the snow leopard install disk driver for cirrus logic, and even tried installing the realtek analog driver. The closest I got to getting anything to work was installing the realtek analog driver. It installed fine up to the point when windows said "this driver is not tested, do you wish to install it anyway?" and I click yes, but then it pauses for a few seconds and the same message comes up again and repeats in a endless loop until you say "no, do not install driver" and then it does a uninstall of the driver.
    Has anyone else experienced this problem and if so were you able to fix it?
    Thanks
    Message was edited by: What2be1

    I found Gigabyte has links to latest updates which work fine.
    Treat Mac Pro as just a dual Xeon PC.
    http://forums.tweaktown.com/gigabyte/30530-latest-overclocking-programs-system-i nfo-benchmarking-stability-tools.html
    Realtek High Definition Audio for Vista\Win 7 2.54
    2010-11-05
    Realtek HD Audio Windows 7
    Or from Realtek which is http://218.210.127.131/
    http://www.realtek-driver.com/
    Guru3D is also a popular site for drivers.
    http://downloads.guru3d.com/Realtek-HD-Audio-2.51_d2598.html
    You can ignore USB audio, you want RealTek HD Audio. There are or can be some of those yellow alerts that are safe to ignore. Buried somewhere in Apple Support BootCamp technotes.
    You can use installer from Realtek or zip file in which case just uncompress and update the driver from inside Device Manager. Nice thing, you can rollback a driver if you want to, or totally uninstall and then reinstall.

  • Hello, I just wanted to know when an update would be available for my mac mini server os x lion to resolve the issues regarding my m-audio fastrack pro usb audio interface (no midi messages recognized)

    Hello, I just wanted to know when an update would be available for my mac mini server os x lion to resolve the issues regarding my m-audio fastrack pro usb audio interface (no midi messages recognized)

    Have you reported your problems to Apple?
    BugReporter
    <http://bugreporter.apple.com>
    Free ADC (Apple Developer Connection) account needed for BugReporter.
    Anyone can get a free account at:
    <http://developer.apple.com/programs/register/>
    And/Or
    Mac OS X Feedback<http://www.apple.com/feedback/macosx.html>

  • Playing iTunes on USB Audio Device

    I would like to output all audio from iTunes to a USB audio device I have attached to my Macbook Pro but leave all other audio going to the laptop speakers.
    I've looked through iTunes (10) preferences to see if there is an option to select an audio device, but can't find anything.
    I have my HiFI plugged into the USB device for playing all my music, but obviously I don't want system sounds etc to play over the HiFi.
    Surely there must be a method to tell iTunes what audio output to use.
    Anyone got any recommendations?

    Here's a solution.

  • Logic Studio, MacBook pro, M-Audio ProFire 610, M-Audio Axiom 61

    I'm just about to get the above: Logic Studio, MacBook Pro, M-Audio ProFire 610 and the M-Audio Aziom 61, and want to know if any of the above (Logic Studio and MacBook Pro excluded) are a big mistake. I've been using an Aluminium Powerbook 17" 1.33MHz, and M-Audio MobilePre USB, and an Edirol controller, with guitar rig (and Controller), and Logic Express 7.
    I need a set-up that will work as well in the studio, as it does on stage. We tend to plug everything in to the powerbook at the moment, and use Reason to power the synths, guitar rig for the guitars and bass, and logic express plugins for vocals etc.
    Anyone have any experience with any of the above?
    Cheers,
    Adam

    Hi Zuelito,
    Please read my first paragraph again:
    "I gotta RESPECTFULLY take issue with every point you bring up about M-Audio stuff, Zuelito..."
    I'm not sure how you can be "slightly put off by the tenor" of my post given everything I said, with the one possible exception being my line about MOTU making crappy hardware - and that was based on personal experience. And while we're talking about the opinions of others, feel free to peruse the Unicornation board - it's full of MOTU users talking about firewire port failures and other hardware issues - so it appears neither of us is alone in our experiences
    Seriously, if I was in some way brash or offensive in the way my post came off, I publicly and sincerely apologize. I really try to think about what I say (and how I say it) when posting on the 'net, for this very reason. I thought I simply stated my experience in an informative manner; again, please re-read my post - I hope it comes across as intended.
    For what it's worth, I will say (even more clearly) that I've always loved MOTU products in terms of feature set; maybe that's why I've owned almost every product they've ever made! However, in my environment, I simply can't risk hardware failures, and their stuff has let me down too many times to keep rolling the dice. I will also divulge that one of their top tech support guys has acknowledged the firewire port problem. That's a shame, because they do make great stuff, conceptually. I really wish I could take a chance on that new 896mk3, but it ain't gonna happen for me; 6 dead firewire ports is enough of a failure rate for me to give up on them. To be fair, this probably isn't an issue for fixed installations, but I have to make these connections daily while on tour.
    Also, I did NOT categorically state that "M-Audio stuff is better than MOTU." Again, if you re-read my post, it should be obvious that all I'm saying is I have a newfound respect for M-Audio, as of the new ProFire series. I also said in my first paragraph that I shared your opinion of M-Audio for a long time!
    If this were all about M-Audio's 410 vs. MOTU's Ultralite (or other competition), we probably wouldn't even be having this discussion as I would have agreed with you - but the original poster specifically asked about the newer 610 with Logic, which is what I'm using on one of my rigs. I simply offered my personal experience.
    As for drivers, I've not had any problems with M-Audio or their level of support. Just the opposite - they really seem to be on the ball and are way more communicative than other mfrs. I don't know of any other mfr. that supports each OS subrelease in detail like they do, and their development speed seems as fast (if not faster) than anyone else.
    Finally, until now I've only owned a few M-Audio pieces (410, 1814), but I can state that they've been flawless. Their audio quality was not 'high end' by any stretch, but I only used them for utility purposes (writing rigs on the road, etc.). Like I said, my main studio stuff has been RME or Apogee for years, and that's the quality level I'm used to - which is why the 610 really surprised me. I also have several friends who do a LOT of touring, many of which rely on M-Audio hardware (mostly 410s). One guy's unit doesn't even have any paint left on it from road abuse - but it still works like a champ after 4 years.
    So anyway, this is all just my experience. Hope it doesn't come across as anything but that
    Peace,
    Jim

  • USB Audio Device sometimes not detected. udev, maybe?

    I am using an external usb audio device which I usually keep plugged into my machine.  I am finding that this device is sometimes not being detected when I boot the computer.
    When this happens, issuing the following command:
    $ aplay -L
    does not list this particular device.  Plugging and unplugging the device does not seem to help.
    What does seem to resolve the problem is unloading and then reloading the snd_sub_audio kernel module.  This is done by issuing the following commands:
    # rmmod snd_usb_audio
    # modprobe snd_usb_audio
    Could anyone give some insight as to why the usb audio device isn't being detected and why this only happen occasionally?  Could this be a udev issue?  The device in question is an M-Audio Fast Track Pro.

    Make a "Genius" appointment at an Apple Store.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

  • OS X 10.7–10.10 iSub workarounds? USB audio devices?

    The old Harman/Kardon iSub (USB subwoofer) never worked right with Intel Macs—but it was always a software issue, which could be worked around: I read years ago about people connecting USB headphones or speakers, which "tricked" the Mac into sending audio to the iSub. (In the case of headphones, I assume they would also use Audio MIDI Setup to make a Multi-Output device allowing sounds from your normal speakers at the same time as the 'phones.)
    Does that trick still work in Yosemite? If not, when did it stop working? Can't seem to get it working on my 10.7 laptop with Jabra Revo Wireless headphones connected to USB (they have wired modes as well as wireless).
    Any other workarounds? I'd love to get this thing going with either 10.7 or 10.10! Requiring an additional USB audio device isn't a great workaround... but I happen to have such a device anyway!
    Thanks for any ideas.

    removed TextEdit related files in /Users/gordan/Library/Preferences (mainly .lock files) , now it is working

  • Cannot see my plugged in USB audio device (Schiit Loki DAC)

    I can not see my plugged in USB audio device (Schiit Loki DAC).  Can anyone help?

    According to the manufacturer, Loki does not need any driver to work with Mac.  Funny thing is, I tried it on an old Macbook runing OS X Version 10.4.6 and it worked! Schiit Loki showed up in both Sound and Midi settings.  I then took the Loki to the local Apple Store and tried it on their new Macbook Air (same as mine running OS X 10.9.1 and it failed again.  The Macbook Air just could not see my device at all.
    Talked with one of their technical experts and he just told me to get a driver from the manufacturer, he wasn't very helpful.  I am about to give up: convinced that Loki simply will not work with Macbook Air for some reason.  If anyone had an experience that showed otherwise, I would be very happy to know.  Thanks for helping.

  • Are USB audio interface issues on iMac Haswell resolved?

    HI,
    i just ordered a 27 inch iMac, maxed out with a 1TB SSD.
    I noticed the imac doesn't have an audio in jack and figured i'd shop for a good USB Audio Interface.
    But then i came across all these USB audio interface issues on the new iMac.
    This is incredible to me because iMacs are often used by creative people and lots of musicians.
    For me audio is VERY important. I record music and i record sound for animation and video.
    Apple thus far seemed to be avoiding the topics and issues at hand.
    Are the USB audio issues resolved? What was resolved? What was the problem (Maverick? Fusion Drive)?
    Is it wise to choose for a Thunderbolt Interface? Which one?
    Any help would be hugely appreciated.
    Especcialy since it seems such a wide spread problem.
    Thanx

    doubt it would be a general issue
    usb is a universal serial bus it always require a driver for anything
    and the driver of one external audio device would act different then the driver from another external audio device
    so it would be very unlikely that an external audio card using a cirrus logic audio chip would cause the same issues with the imac as one with a realtek or soundblaster audio chip
    not that there could not be issues with all of them but not likely that they would suffer from the same issue

  • USB Audio device - CPU usage spikes - w520

    I have a LENOVO W520 4276CTO
    Intel Core i7  @ 2.40GHz
    8.00 GB Dual-Channel DDR3 @ 664MHz
    Whenever a USB Audio device is enabled I am experiencing cpu spikes every 8 seconds approx.
    This activity happens with 2 different usb audio devices from 2 different vendors.
    I have used various tools to try and track the problem down such as latency checkers
    LatencyMon indicates a large amount of ISR and DPC activity on the
    usbport.sys driver
    i've been trying to resolve this problem for weeks now and would appreciate any help .
    Thanks
    Glenn

    What USB controller are you using? Not saying it will address your issue but there is a driver update for the Renesas controller (2.1.32.0). When I installed it I had to manually update the driver.
    For your USB devices, are you using their latest drivers?
    You may also want to review kb2529073 to check whether the kb is applicable to you.
    I have played around with a USB external audio device in a dynadock (Toshiba) and no DPC issues but an issue with not being able to run 'Smart Audio' in cpl. The message is 'Failed to initialize smart audio'. So I have to use the system utilities to control the Conexant audio. Have you noticed any issues with the onboard audio tools and your external audio device?
    You may also wish to check the Microsoft site for any Win 7 USB related hotfixes that may help.

  • I am new to iMovies.  When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch.  Very annoying.  How can I fix this?

    I am new to iMovies.  When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch.  Very annoying.  How can I fix this?

    DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.

  • TS4088 I have a MacBook pro that has power issues and will not start but the hardrive is fine.  I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase o

    I have a MacBook pro that has power issues and will not start but the hardrive is fine.  I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one?  Also, the software is not updated as the computer hasn't worked for about 2 months. 
    Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well?  It is not saved in the cloud.
    Thanks for your help, it is much appreciated.

    You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
    But it would be a mistake to simply put the old HD in the new computer.
    These are the steps:
    Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
    Put it in a cheap enclosure
    Connect it the new computer
    Boot up new computer.
    If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
    Obviously chose the second option (another HD connected to this Mac) and follow prompts.
    If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
    Message was edited by: Mike Boreham...added sec on line

  • No Digital Output available in Playback devices (USB audio device)

    If one has USB audio device with coax/toslink out, with proper drivers (like ie TurtleBeach Micro Advantage) available & installed then Digital Output is available to select in Playback devices. (and one can play AC3/DTS to external amplifier with ie
    VLC or MPC-HT with AC3Filter DS filter)
    But some USB devices (ie Phonic Digitrack -
    http://www.phonic.com/en/digitrack.html ) do NOT come with drivers (as Windows has default build in). Digitrack uses TI
    Burr-Brown USB Audio Codec 2906 -
    http://www.ti.com/product/pcm2906
    Sadly these Windows drivers do NOT have a clue about what the device actually has as inputs/outputs
    So even it had coax digital out & the sound IS send via it, the actual data send is in right way, not recognized/played correctly by Digital Amplifier (AC3/DTS)
    Does anybody know of a hack to make Digital Out available?
    Seb

    Hi,
    Generally speaking, An Audio Device do need more driver besides USB driver to make itself work properly. In terms of your situation, USB driver is not enough to make your Audio Device works properly.  I think S.Sengupta
    is right. Actually it would be better to contact Digitrack support to confirm its product compatibility with Windows 7.
    Roger Lu
    TechNet Community Support

  • USB audio device loses output connection

    I use a MobilePRE USB interface and had no problems until recently. My iMac is set to never sleep but if I do not use the computer for a few hours the output from the MobilePre is gone.If I change to the driver to the internal headphone output on the Mac all is fine but in order to use the MobilePre as output I must restart, then it is fine until the next day or a few hour later.
    The same time that this problem developed, about a month ago, I also noticed a low level snap or popping sound. This happens through my external speakers and is triggered by any sound activity approximately 30 seconds later. It even happens with the volume turned all the way down and sounds like a connection is being made. Like I said these two problems started about a month ago around the time Apple was sending a lot of updates. I have read a long thread on the OSX forum and know this is a pervasive problem with no solution yet. I mention it here as a curiosity as it started around the same time as the USB audio device problem. My hunch is that it has something to do with a recent update.
    I don't think this is a GarageBand problem because it is the same no matter what software is outputting. I ask on this forum because there some knowledgeable audio heads here.

    Check the archlinux news item which calls for an entry in kernel commandline .................

  • Volume control with USB Audio device

    Hello all.
    I have just purchased a cheap USB audio device to connect my HiFi to my laptop with only one, neat USB lead and a USB hub - meaning I no longer need several USB wires and an audio cable across my desk.
    This works fine, but I have just noticed that the volume control in OS X has no effect on the output now, only Mute or On. The volume within iTunes works fine, but not the OS X one.
    Any way I can avoid having to use the volume on the hifi when using the USB Audio device?
    Many thanks.

    Don't think so unless that piece of hardware came with compatible Mac software to control it.

Maybe you are looking for