MacBook Pro USB Hotspot

Good Afternoon, for first i'm sorry for my bad english and my grammatilac error, I'm Italian!
I've one question, with my MacBook Pro, connected by WiFi connection, is possible to share my network to my iPhone 5, using USB cable?
I've no possibility to connect my MBP to Ethernet cable.
Tnx Giuseppe

Because now I've only WiFi connection, if I've ethernet I know I can to share with WiFi, but now I've just WiFi connection!

Similar Messages

  • Mid 2010 Macbook Pro - USB & Midi Issues

    It all started when I recently bought a Pioneer DJM-900srt and switch from Traktor to Serato Dj. Now, I have been using my current Korg Nanocontrol for about 2 years problem free using manly Ableton Live 8 and Traktor Pro 2. Never needing to download any drivers and/or control editors. Fast forward to recently. Unknown to me at the time Serato Dj had some known issues with Midi mapping (that i should of researched more) but I went ahead and downloaded the latest Korn Nancontrol driver and control editor. Thinking 1) It might solve my Serato Dj problem and 2) what could it hurt? The second turned to be a nightmare.
    So before I downloaded the driver and control editor I could plug in and unplug any of my midi usb devices, audio interfaces and Dj mixer in no specific order and at anytime and every thing would work and midi map as it was meant to. However, after downloading the driver all **** broke loose. While the driver was on my laptop none of my listed midi devices would connect properly and half the time the program would fail or just not open. I know you're not Allen & Heath but I also tried to download the latest driver from their website for my non working Xone 1D; Ableton, Serato Dj and Audio/Midi setup in utilities just will not open so i cant even tell if the midi devices are functioning properly. So I went on and deleted the Korg driver, editor and the Xone 1D driver.
    After deleting the drivers and Korg control editor things now somewhat work but far from how they should. In order for things to function somewhat properly I must turn on the devices  in this exact order. Turn on the computer and let it fully boot up. Plug in via USB to my laptop and turn on the Djm-900srt. Plug in my USB 7 port extender (with power supply) plug in my Korg Nano and my Maschine Mikro into the extender and turn it on. Boot up Ableton to quickly check if the devices mounted properly. Open up either Traktor or Serato and rock the house. The Allen & Heath Xone 1D has been dead in the water since the initial Korg Driver instal.
    I can get screen shots of anything if it will help after work today. Around 5pm CST
    Detailed specs:
    Computer-
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro6,1
      Processor Name:          Intel Core i7
      Processor Speed:          2.66 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache (per core):          256 KB
      L3 Cache:          4 MB
      Memory:          4 GB
    Dj Gear-
    Mixer - Djm-900srt
    Midi Devices - Korg Nanokontrol 1st gen, Maschine Mikro 1st gen, Allen & Heath Xone 1D
    P.S. Any new USB device will not function or be recognized.

    Please help. I have racked my brain and I still can't figure out how to fix this. I cannot believe that 1 korg driver download permanently ruined my computer. I swear to everything holy that my computer was running like a well oiled machine before the download and Korg has been little to no help.

  • MacBook Pro & USB frustration: Why is it that my USB files appear in an "unrecognized format" when I try to open them on my Mac?

    Hello, I recently bought a MacBook Pro and every time I insert my USB, it appears on the desktop. However, when I double-click it to open the files, the files appear in "an unrecognized format". They all end with this: ".lnk"...if it's a video file it ends with .lnk, if it's a picture file it ends with .lnk, if it's ANY document it ends with .lnk. I'm getting tired of this situation and I've only had this laptop for a week. Please, open my eyes and show me that the sacrifice I made to buy it was worth it. I wanted a Mac so bad, and now this is making me hate them and prefer PCs. What do I do??? How can I change that and make this laptop read these files??? Please help. I need to copy some video files from my USB to my Mac as soon as possible.

    An lnk file in Windows is a shortcut that points to the actual file. Rather than copy the actual files, you made a shortcut to them on your USB drive. Try going to the Windows machine and selecting the files then choosing Copy, change to your USB drive and choose Paste.
    If you were to open a Finder window and right click one of those files then choose Get Info, you'll probably find that it's way to small to contain the movie or whatever.

  • External Hard disk cannot be detected by my MacBook Pro USB's

    Hi
    I have bought an external hard disk 2.5" and even though I have formatted it as FAT 32 still none of my 2 USB ports detect it. It is a hitachi drive 160 GB eSATA. I haven't use power with my external drive.
    I ended up sharing it through a toshiba notebook I have for the kids running Windows XP and I transfer files though the Toshiba to the external drive. It's outrageous!!!
    Any ideas?
    thanks
    Andreas

    Hi Andreas,
    OSX can recognize and use FAT32 partitions without additional help !
    Your problem sounds to me as a power consumption problem of the external HD, meaning that the HD does need more power from the USB port than the MacBook Pro can deliver.
    Best solution might indeed be to get the external HD on its own power supply.
    Stefan

  • Macbook Pro Usb problems

    I have a Macbook Pro, and I recently started having problems with the usb ports. I run some midi equipment off of them and I have a usb hub that I connect in as well. And recently the usb port closer to the lighting port wont connect with any mice and with any of my controllers. Both ports charge my ipod but I cant get any usb hubs to work in the top on (closer to the lighting port)
    Help?

    Try an SMC reset.
    http://support.apple.com/kb/ht3964

  • Macbook Pro USB port is not working

    I have a Macbook Pro 15-inch mid 2010 running Mavericks 10.9.1, the problem is that one of de two USB ports stop working, does not recognize any USB divice. I already tried restarting the PRAM and the PMU and the problem persists. Please help!

    Did you try a SMC reset? If you di and it still doesn't work thenn it is broken. The only way to fix it is to have the logic board changed.

  • MacBook Pro USB Hubs no longer working

    Hello Apple Support.
    My 13" Mid 2012 MacBook Pro (Running OSX Mavericks)  is having some odd issues recently. I have 2 USB 3.0 hubs. One of them works perfectly fine, the other doesn't work at all. I've plugged everything from mice to USBS's, but the computer doesn't recognise them nor show up in the System Report (Apple>About this Mac>More Info>System Report>Hardware>USB)
    I have already tried resetting the PRAM/VRAM to no avail.
    I stumbled across this problem as I have previously bootcamped my mac with Windows 7 Ultimate. However when I woke up I saw that my corded mouse was not working. I restarted my MacBook Pro into OS X, and identified that 1 one of USB ports is faulty, the other perfectly fine.
    Yes, I have tried restarting (it was the first thing I did), but the problem persisted.
    Could it be a physical problem? What should I do now?
    Regards
    Andrew

    If you have Apple Care, take full advantage of it before you lose it.  Otherwise, take the computer to an Apple store or an AASP if the suggestions here do not help. 

  • MacBook Pro USB cable iPhone internet

    Hi
    I am a management consultant and the only one I know who is Mac based down here in Sydney, Australia.
    I use an iMac as my main office machine and configure a *MacBook Pro* using ChronoSync when I go interstate to see clients or run strategy workshops.
    Now that it has finally arrived down-under, I want to buy an iPhone. However, before I commit to a phone carrier and a plan, I would like to know if it is possible to connect the *MBP to the iPhone* using the *USB cable* and *using that connection* go through to the internet so that I can use Entourage on the MBP to pick up my email etc.
    I need to do this simply because I have organised all my client and project work using the *Project Center* in Entourage. I mean, connecting laptops to GSM phones to conntect to the internet or enterprise systems is not really new.
    This afternoon I talked to the Geniuses in the new Apple Store here in Sydney and could not get a clear cut answer. Heck, the iPhone is also WiFi and Bluetooth enabled so there must be a way of doing this.
    Any thoughts? Any one tried this yet?
    Regards
    Jai

    It's kind of surprising that they missed this one. It has been the topic of much discussion all over the Apple forums over the past week or so.
    But from the start, they did not allow access to any of the phone features themselves, especially those that are directly related to charges ATT would make...like voice dialing, etc...ATT offers Voice Connect as an add-on feature at cost....they also offer tethering at cost.
    I know in the HTC forums at the ATT website, there was a lot of discussion about tethering and how they can tell you have tethered or not. Apparently ATT CAN tell the ISP numbers of connections, and they DO charge for tethering, even when it appears they should have no way of knowing.
    I am sure that ATT put a kibbosh on the tethering App until they can figure out how to charge for it. It's a good 30 dollars MORE per month, above and atop the unlimited data plans. Thats income ATT isn't going to lose.
    I am sure it went something like:
    Apple lets tethering App slip through -- ATT sees it and calls Apple and cries Foul -- Apple pulls the app -- somehow it ends up back on the AppStore site -- ATT calls foul again, and it is removed for good until this is resolved.

  • MacBook Pro USB ports only sorta working...

    Both USB ports on my MacBook Pro have stopped being recognized. I can still synchronize my iPhone, but cannot use thumb drives or external hard drives. I've tried all the previously suggested remedies to no avail. Other thoughts, please.

    Hey deanfromjensen beach,
    Thank you for visiting Apple Support Communities.
    That is odd that your USB ports are working to sync your iPhone but not working with thumb drives or hard drives.  Do USB keyboards or mice work?
    There is an article for help troubleshooting USB in Yosemite.
    OS X Yosemite: If a USB device isn’t working
    Also check the troubleshooting in this article:
    USB and FireWire Quick Assist - Apple Support
    Please let us know how it goes,
    Nubz

  • Macbook Pro-USB

    Why doesn't my macbook pro read my usb drive? I connected it and it read it the first time, after that it didn't want to read it anymore. What can I do?

    @Poikkeus
    You're a hero!
    Spent hours researching why my Macbook wouldn't read my new usb while my old windows pc would.
    My Macbook would read other usb devices, so it drove me crazy.
    Then i read your solution en never thought it would work, it's so easy sometimes
    Just wanted to say THANKS!!!

  • Macbook Pro USB Overcurrent Notice - Bluetooth related?

    Hello,
    I am having a problem with my macbook pro that is really frustrating me. I am constantly getting a USB Overcurrent notice, even though I have nothing connected. The really curious thing is that it also seems to be having an effect on the bluetooth capability of the machine. Before the notice, bluetooth works fine, and after, it is either "unavailable" or, when running Windows XP in bootcamp, the bluetooth module doesn't even show up in the system manager. Any ideas would be really helpful!

    if it is in warranty or applecare then i'd call support, sounds like a hardware fault

  • Macbook Pro,USB Hub, Maschine, USB Turntable, Audio Interface

    So I have a MacBook pro 13 inch. I'm also using Maschine and a USB turntable to sample from. My problem is I want a USB audio interface so that the audio comes out clearer on these KRK Monitors I have. If I get a USB hub will I be able to use the midi options with the hub using Maschine or have audio going in and out of the same hub with an audio interface? Please help

    I get the same type of problem with my usb hub when my usb3-enabled hard drives are connected, but not all the time.
    Without the usb hub i never have a problem, which seems like the hub is the problem.
    Things started to happen when I started using usb3-capable hard drives

  • MacBook Pro - USB Hub power exceeded / Lost TrackPad / iSight

    Hello
    I have an older 17 inch MacBook Pro - Windows XP
    Generic USB HUB , 1 of three is not working
    Marked with a yellow exclamation mark in Hardware explorer in Windows
    Tried dropping the driver etc
    When I insert just a USB memory stick - says USB power exceeded
    Lost touchpad and iSight camera as well
    Logic Board ?
    - Andrew -

    The keyboard is a hit-or-miss proposition for mounting thumb drives. I've found that some brands of drives are more sensitive to this than others. Does the drive work when you plug into the back of the iMac?

  • Macbook pro USB freeze

    my new macbook pro is freezing when i connect the usb hub with all my printers.
    its fine if the usb hb was already connected when is start up the macbook.
    but when i plug it in sponaneously - it freezes completely.
    what shall i do
    system is 10.6.7 macbook i core 7

    I get the same type of problem with my usb hub when my usb3-enabled hard drives are connected, but not all the time.
    Without the usb hub i never have a problem, which seems like the hub is the problem.
    Things started to happen when I started using usb3-capable hard drives

  • Macbook Pro USB issue

    Hi All;
    I saw lots of discussions about USB problem of Macbook Pro, and i tried maybe all suggestions,  i couldnt solve USB issue
    I bought my Macbook Pro 13 inc, 500 GB, i5, OS X Lion, 2 days ago and this is my first Mac ...
    I cant see my external disk (Philips), Samsung Galaxy S by using USB ports (i tried both USB enterances, but not working).
    I checked my Hardware by Apple Hardware Test (extended test done) and it says 'No trouble found'
    I checked Utilities and USB devices are not written in the list, only 500 GB SATA disk shown.
    I uploaded MacFuse-Tuxera and ntfs-3g-2010 softwares for using USB devices but i cant solve the problem too...
    My USB devices are not shown in desktop and utilities lists
    How can i solve this problem, my devices work in Windows 7 - PC as usual, but in Macbook Pro, they dont work, please support me. I dont think that it can be hardware problem, Mac is new and devices are ok. Operating systems are different only.
    Thanks, Regards.

    I solved the problem about Samsung Galaxy S, now i can connect it by changing settings of GALAXY S.
    Settings>Applications>Development
    Than i plug phone to MAC and now i can see my phone on desktop
    I checked my PHILIPS external disk, unfortunatelly it is produced for only Windows operating systems, so i cant use it anymore
    My MAC has no USB problem, i can use my 3G USB device too, only Philips external disk failed.
    Thanks for your support...

Maybe you are looking for