Macbook pro v10.6.4 reinstall with disk when typing name address keeps freezing up
I have macbook pro bought 2009 -2010 the computer keeps freezing the mouse is unreponsive and keeps spining. Tried to do clean reinstall with cd came with new I did delete old hd the install. when its finished and adds a few more programs it ask information about myself name address the same thing happens mouse starts spinning cannot do anything but turn off. Try again same thing happens. does anyone know what to do please I just dont know what is going on
I have macbook pro bought 2009 -2010 the computer keeps freezing the mouse is unreponsive and keeps spining. Tried to do clean reinstall with cd came with new I did delete old hd the install. when its finished and adds a few more programs it ask information about myself name address the same thing happens mouse starts spinning cannot do anything but turn off. Try again same thing happens. does anyone know what to do please I just dont know what is going on
Similar Messages
-
HT1338 MacBook Pro went down - tried reinstalling with back up disk - not work - help!!!!
As above???????????????????
That error occurs when the Windows Scheduler fails.
Try to use System Restore first.
If that doesn't fix the problem,
Run the Vista System File Checker Tool:
1. Open a Command Window in Administrator mode:
* click Start
* click All Programs, then Accessories
* right click on the Command Prompt option,
* on the drop down menu which appears, click on the Run as Administrator option.
* If you haven’t disabled User Account Control (and you shouldn’t!) you will be asked for authorisation. Click the Continue button if you are the administrator or insert the administrator password.
2. Start the System File Checker
* In the Command Prompt window, type: sfc /scannow,
* press Enter.
* You’ll see “the system scan will begin”.
The scan may take some time and windows will repair/replace any corrupt or missing files. You will be asked to insert your Vista DVD if it’s needed. -
I'm trying to download an automatic update from ITunes but when I click on "Update" it comes up with the message, "You have updates available for other accounts" an tells me to sign in to my husband's account, even though the MacBook is registered in my name and I have my own ITunes account. My husband has his own MacBook and ITunes acct. How do I fix?
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID.
Apple ID FAQs
http://support.apple.com/kb/HE37 -
Hello
I have a macbook pro 2011 13" that came with OS Lion (integrated not on a disk). I recently bought OS Mountain Lion of the app store and it is working fine. However I was a bit dissapointed in the battery so I decided to try and downgrade and completely failed, I froze the computer and when I restarted it it did not work. I went into recovery system and erased my disk and all that and went to re-download my OS. I was expecting to get the option to re-download Lion but instead I could only re-download Mountain Lion.
My question is since my computer originally came with Lion can I reset my computer so I get OS Lion back instead of OS Mountain Lion?
Thanks for any help. Any answer will be appreciated even if it is saying it is not possible.Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Kappy, a pretty wonderful and very knowledgeable man, has tip for that which I have copied and pasted above -
I Have a Macbook Pro that does not have a disk drive. How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased. I registered the S/N and I can't find the Free download anywhere only trials.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Macbook Pro V10.6.6 Snow Leopard
I have a Macbook Pro V10.6.6 Snow Leopard. It looks like the OS crashed and it's not booting anymore. It's getting stuck at grey screen. I tried lot of things (could not boot in safe mode, Disk Utility do not show upon boot, Internet Recovery is failing with -2000F error, ...). It looks like i will have to reinstall the OS. However, I do not have the CD the came with the Macbook. Where can I download it from?
10.6 isn't available as a download.
If you've lost the Snow Leopard DVD you can buy it again at the Apple Store. -
Last week, I had no problems streaming my MacBook Pro to my sony Bravia with a logix hdmi cable. I came back from holidays and now it doesn't work anymore. What settings should my computer be on and what settings should my tv be on?
TarahCurrie Sep 10, 2014 3:48 PM
Restore From Time Machine Backup
Reinstall OS X
Get Help Online
Disk Utility
MacBook Pro, Mac OS X (10.5.8)
You are running 10.5.8
Did you try booting off your Install disk holding the c key down. From here you can get to the drop down menu just a few clicks in (you are not going to install) and run the Disk Utility>Repair Disk. See if it will let you do this. -
My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words and looks them up via dictionary. I currently have a wireless mouse connected and I am still having the same problems.
I fee like I may have a virus or my laptop is perhaps being accessed remotely. All of the sharing options are unchecked.
HELP PLEASE
Very worried!!Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
after the chime press and hold down the OPTION key until the boot manager screen appears.
Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo). -
I need to know which update(s) I can apply to help stabalize the system.
Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here. -
MacBook Pro frozen on startup screen with progress bar and then it turns off
Hello, I have a MacBook Pro 15" of early 2012 with a i5 Intel, 4GB of RAM and a 500 GB HD.
I was installing the new suit of Adobe, when suddenly my Mac got frozen, vertical coloured lines appeared and the image on screen went distorted. I had to reboot the Mac by holding the power button until the screen turned off and when I turned it on, the lines appeared again and it itself automatically rebooted. Then the screen (now with no vertical lines) got frozen on the startup grey screen with the apple logo and the spinning wheel for hours with no response.
I tried to follow the steps of the official mac forums like verifying the HD with CMD+R and then Disk Utility, it says everything's fine; the same happens with CMD+S, no errors. I reinstalled Mavericks with the same CMD+R. I already reset the PRAM, SMC and performed a Safe Boot staring up in Single user mode and Verbose Mode and nothing, the same startup screen. I made too thins thing of holding shift until the progress bar appeared. Three days later (Today) I repeated the steps again and finally the verbose mode. Now, when I turn it on, the startup screen appears again (Apple Log and spinning wheel) with a progress bar. When it completes, the Mac turn itself off.
if you can help me, please. I don't know what else to do. The last thing is technical service.Hi again ggt15,
You can find some more information about the Recovery Partition of your hard drive here:
OS X: About OS X Recovery
http://support.apple.com/kb/HT4718
It sounds like you might be trying to reinstall your copy of the operating system. If that's the case, you may also find some helpful information here:
OS X Lion: Reinstall Mac OS X
http://support.apple.com/kb/PH3878
Thank you for using the Apple Support Community. Due to the nature of your issue or question you may find more information by using another one of Apple's support resources - https://expresslane.apple.com/GetproductgroupList.action.
Cheers,
Braden -
Hello, I have mistakenly deleted all partitions on my mac while trying to install windows on my macbook pro, how do i reinstall the mac os back. I just wanted to have them both, please help. thank you in advance
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
i have a late 2011 macbook pro i want to reinstall os lion 10.7 so when i reboot hold down options key click on recovery hd then in the os x utilities screen it says reinstall mac os x is there any way i can save this download so i can burn to dvd
steve359 wrote:
Sorry ... I read but was unfortunately distracted from your original post. You have a system that came with Lion. The Lion that is on your system is only for your computer and cannot be downloaded from the app store again because you never purchased it officially through the App Store.
Try this for making an external USB/DVD copy of Recovery on an external disk. internet is still required for reinstall, though, I believe: http://support.apple.com/kb/HT4848. But at least you have a separate Recovery Partition if you ever need a fully new and empty internal disk.
Your assumption is incorrect. Although he may not be able to download it from the App store he can download it directly for the Apple servers using the recovery partition on his original drive.
All you have to do is start the install routine and then point the install to an external hard drive. Once the download is finished the computer will reboot to start the install. At that reboot disconnect the external drive so the install can not start. Boot the computer back into the OS on the internal hard drive, which is what will happen automatically once the external drive is disconnected. Then connect the external and copy the files from it that were downloaded. Right click on that downloaded package file and select Show contents. In the contents of that package is a file called InstallESD.DMG. Copy that file out of the package and burn it down to a DVD or USB thumb drive and you now have the Full Lion Installer. I have several of them laying around on different hard drives and 2 USB thumb drives which I have used to reinstall Lion on my 15" MBP.
Sorry OP I should of just typed this out in my first post. -
MacBook Pro won't stay asleep with external monitor attached. When sleep is selected from the Apple menu the computer will go to sleep only to continually wake up...go back to sleep...wake up...etc. every few seconds. This only happens when using the external monitor. Does anyone have any suggestions?
Mine does that too. The worst thing is when it goes to sleep, then wakes up and keeps running while the lid is closed and it is wrapped up in a case. I am afraid when the hot weather comes it is going to burn up. I am hoping Apple fixes it in the software or they may have a melted MBP to replace.
Then when I open the lid it is crashed running at fill tilt, pumping out heat to beat the band. I am forced to hold the button down and reboot.
I wiped my hard disk and reinstalled my OS, but it didn't help. I reversed my OS to 10.5.0 and it solved the DVI problem but still won't sleep. This post will probably be deleted by Apple, they did it a few days ago. I just don't know what to do, and I consider myself a real Apple expert. Just hoping you realize you are not the only one. -
How to install W.7 on 2011 Macbook pro which doesn't come with bootcamp dvd?
how to install W.7 on 2011 Macbook pro which doesn't come with bootcamp dvd?
Use the Boot Camp Assistant in the /Applications/Utilities/ folder to put the Boot Camp drivers onto an optical disk or USB thumbdrive.
(80603) -
I have a MacBook pro version 10.6.7 with snow leopard. After an scheduled software upgrade I could not open Quicken (It said it could not open the files). Now I can only open it if I have my external drive on. Can you help?
All the information that I had input on Quicken is gone. I have to have the external hard drive that I use to back up to be able to use quicken now. It is as if it was erased from the laptop hardriveTry repairing permissions. My favorite way is with a utility called AppleJack. Info and download here. It's free. It only works when you boot in Single User Mode. When restarting or booting, hold down the Command key and S keys.
You will get a very different startup screen that looks like the Terminal app has hijacked the screen. Just let the lines of text scroll by. When that happens you will get a text entry prompt. Type in "AppleJack" without the quotation marks.
A DOS looking menu will appear. Choose 1 or d to run Disk Repair. If you get a message that Disk Repair found and corrected errors, run it again. Repeat until you get the "your disk appears to be ok" message. This rarely happens with my experience, though. This does the same thing as as booting from an external drive and running Disk Utility's repair. Only, no external drive is required!
Next, choose 2 or p to repair disk permissions. This will take a little while. AppleJack warns that it will take up to an half hour to run repair permissions. It'n never taken more than about ten minutes for my MacBook Pro.
As permissions are repaired, you will see each repair scroll on the screen. When done, the menu returns, choose q to quit. Then at the prompt, enter "exit" without the quotes. Your MacBook Pro should restart into Mac OS normally after this.
Hope this helps.
Maybe you are looking for
-
Why isn't my iPod Touch 4G getting detected on my computer?
My brand new iPod Touch isn't getting detected onto my Mac OS X 10.6.3 and I'm not sure why.
-
I needed to do some server maint. for a customer of mine. It involved deleting and recreating their email account. I set it up as an IMAP account in Mail. Retrieved the messages and moved them to a local folder. Deleted and recreated the account on t
-
Since updating our server, I get clients with kernel panics. The log refers to being unable to update the clients font cache and only happens on log-out. Anyone else experience this or a fix? The latest update didn't help . . .
-
Network Install of OL5U7 via FTP
HI All, Is it possible to install Oracle Linux 5 Update 7 from an FTP location? I'm using HP ilo to get a console session to the blade with the OL5U7 iso mounted. During the initial installation screen, I've typed in "linux askmethod" and then a coup
-
FP 10.1 green screen with sound Win7 32bit IE
Hi there, I still face this issue with the green screen, which usually starts with a flickering that becomes worse and worse and ends with a completely green screen. The sound in the background works fine. I tried disabling the HA at the beginning, h