MacBook Pro Video capture problem

Hi....Can someone help me please..Im using MacBook Pro late 2011 model, OSX 10.9.4, 16 GB RAM, 120 GB HDD Free space. Having problem to capture my footage from my Panasonic 102B (miniDVTape) camera. Only i sight camera appear in i movie or FCP X. What should I do?
Thanks.

Thanks Russ...tested my camera with another Mac and its working ...also tested my firewire port by connecting it with a protable HDD its work too..
So what im doing now is capture my footage with my previous Mac and transfer it to my MacBook Pro with a protable HDD.....until someone found a solution to this problem...

Similar Messages

MacBook Pro Video Update 1.0 problem

I downloaded MacBook Pro Video Update 1.0 (Snow Leopard) and I am using Mac OS X Ver 10.6.8 however it alerts that this software is not supported on your system. I have the problem of black screen of death. I am using an extra display. I arranged mirrors displays so I can use the computer.
What should I do?
By the way I am in Turkey.

I went the authorized service in Ankara Turkey. They said they have to change whole screen and wanted to get 800$. Of course, I rejected. Then, they said they have a second hand display connector cable (which was the suspected piece for the problem) to replace for $80. I accepted and gave $80. Problem fixed! My computer is still working perfectly.

Macbook pro touchpad/curser problems.

macbook pro touchpad curser problems. typing randomly jumps to wherever the curser is resting at the time. unbelievably maddening. multiple devices same all have same problem. hard to believe we cannot find anything on the apple site about this. MANY complaints outside of this site on this issue... clearly a touchpad/battery design flaw being ignored by Cupertino. during the writing of this post, the curser jumped randomly and started typing in a different location six times. IMPOSSIBLE to use as a word processor since typing becomes quite frustrating. HELP. any ideas? Fanboy and shareholder. three macbook pros in the house...all the same problem. (please do not offer separate keyboard as solution...this is a laptop, not a Surface Pro...)

Go step by step and test.
1. Restart
2. Shut down the computer.
    Clean the trackpad with moist not wet microfiber cloth.
    System Preferences > Point & Click
    Try turning off three finger dragging and then turning it on after testing.
3. Is there any Bluetooth device nearby with failing batteries? If so, replace the batteries.
4. Reset PRAM:   http://support.apple.com/kb/PH14222
5. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
6. Close all windows and quit all applications.
    Click the Spotlight -the magnifying glass icon- in the menu bar. Enter Disk utility in the box.
    Select Disk Utility from the drop down. When the Disk utility window opens up,
    select Macintosh HD, then First Aid.
    Click Repair Disk Permissions button.
    Ignore the time remaining estimate.

My 15" macbook pro have big problems identifying and connecting to my wireless network

my 15" macbook pro have big problems identifying and connecting to my wireless network. I have no problem connecting to my neighbour´s. Also I have a 13" macbook pro, a 13" macbook, 2 ipads and 3 iphones (3, 4 and 5) and none of these have any problems connecting to my wireless. My 15" is running Mac OS X 10.7.5, has a 2.66 GHz Intel Core I7 proc and 8 GB Ram

Hi Frodey,
Thanks for using Apple Support Communities. This article has steps to take to troubleshoot connecting to a wireless network and may help:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Cheers,
- Ari

2012 MacBook Pro Intel i7 (purchased May 2013) constantly drops airport connection. My 2006 MacBook Pro has no problems connecting and staying connected.

I received a 2012 MacBook Pro INtel i7 for my birthday this May 2013. It constantly drops my airport connection. My ancient 2006 MacBook Pro has no problem connecting to airport, nor staying connected. I've had to write this message several times as I keep losing the airport connection and have to reconnect. BTW: I am less than five feet from the airport base.
Thanks for help.

After trying all of the above the suggestions, the problem returned as before. However, after digging some more I discovered that the issue appears to lie with the 10.4.10 version of the Mac OS; when I checked the software log under the system profiler I noticed that I had installed that update at about the time my Airport problems began. Apple then quietly released a v 1.1 combo update to 10.4.10 on July 2nd, which once installed appears to have resolved the problem. You can find the download at http://www.apple.com/support/downloads/macosx10410comboupdatev11intel.html
What's curious is that originally Apple listed that the v 1.1 combo update resolved some issues with RAW image data, and some sound problems, which don't seem to have anything to do with Airport.

Problem in my MacBook Pro Video Calling in Facebook

I have problem when trying to start video calling in facebook, it always says "The video calling software encountered an error while starting."
and it's very annoying because I can't use video call on facebook.
I tried to follow instructions on how to uninstall video calling in facebook and I've tried to follow this instructions in
https://www.facebook.com/help/247662461917444/
For Mac OS X:
In the Finder, go to your Home directory which is labeled with a house icon and your username.
Open the Library folder.
Open the Internet Plug-Ins folder.
Delete the FacebookVideoCalling.bundle file.
When I tried to look for the said file, it is not inside the Internet Plug-Ins folder.
Is there any problem with my mac? I am using MacBook Pro mid 2012, 10.8.3
I hope someone could help. Thank you.

Have you enabled the service yet? Here's a link to enable it on 10.7:
http://osxdaily.com/2011/07/06/facebook-video-chat-mac-os-x-lion/
Should be much the same.

Macbook Pro Video problems stemming from logic board

Recently my MacBook Pro 15" 2.4 GHZ started acting odd. Doing normal (i.e. nothing too CPU/Video card taxing) the monitor would work fine But it almost always happens immediately when playing a game, WoW for example. Then the display would show random odd characters and colors, almost as if the laptop went into a fit of rage. This almost never happens when surfing the web, using a text editor, etc.
I called Apple tech support and scheduled an appointment with a local reseller. The attendant there hooked up a device that quickly said something about a "4v video display adapter" not functioning correctly. She informed me that this meant the logic board was bad. I was quoted something about $310, but since I don't have that much to spend atm I didn't ask her for details.
My only real question at this point is how much does something like this cost to repair/replace? If it is the $310 (before shipping and handling of course) then I'm almost happy. If it turns out to be too much more then I will have to consider relegating my favorite laptop to minor duties and consider buying something else.
Thanks for any info/help with this.
Message was edited by: Robomrvn

Yesterday my laptop became emotionally distressed...my screen went berserk, diagonal lines everywhere. I rushed to the apple store and met with a genius, unfortunately he was unable to help me...I almost dished out $310 to send it in for service.
After multiple hardware and software diagnostics (Techtool Pro, ASD, Disk utility, Disk warrior, and Drive Genius) I could not find the problem. Then I came to the conclusion that maybe there are new default settings from new Snow Leopard update (10.6.3). MBP’s default fan speed...The GPU was overheating and creating a distorted video signal. How did figure it out you might ask, well I put the laptop in the freezer for 3 min and guess what, the screen went back to normal (Somewhat impatient). Then, I found little app that let's you adjust the fan speed RPM.
*smcFanControl 2.2.2* Control Intel Mac fans to make it run cooler.
http://www.macupdate.com/info.php/id/23049
Also, I will recommend a widget called iStat Pro and it also has a matching iPhone app to monitor your laptop temperature and other important info from afar.
http://www.macupdate.com/info.php/id/20364/istat-pro
I am somewhat concerned though, did overheating the GPU cause lasting damage to my logic board?Time will tell. Also, is this a issue that Apple should look into....Yes.

Not another video capture problem

I know people are sick of hearing about problems with capturing video, but my problem is an easy fix I think.
I have 2 computers: Powerbook G4 and a Macbook Pro, and my old powerbook can detect my cam for capturing, but my macbook pro won't. Both have the same exact FCP software and I'm using the same 9 pin firewire 800 cord for both. my vid cam is a cannon GL1.
So I'm guessing its gotta be a quicktime problem?

Yes, I've tried firewire basic. There's gotta be a way to fix it without having to buy a firewire card.
Get another (non canon) camera or remove the external drive and capture directly to your internal.
x

2011 Macbook Pro External Monitor Problems

Hi all,
Looking through some of the threads, it appears that getting macbook pros to work with an external monitors is a big issue.
I've just bought a phillips 27" monitor and I'm having no luck whatsoever getting my MBP to see it. I've tried both HDMI and DVI using Apple's own mini adapters, but no matter I do, the monitor fails to detect any kind of signal and goes into sleep mode.
I occassionally get the blue screen flicker on my MBP as though it's trying to connect, but the monitor does nothing!!
I've tried most of the suggestions in other threads, which relate to earlier OSX versions, but nothing has helped.
I'm running 10.8.4 on a 2.2 GHz Intel Core i7.
If I fire up my Apple TV, I can use mirroring and the monitor displays my desktop no problem, but the picture quality is poor. So I guess the monitor works. I want to use a bigger screen as I use Logic Pro, so clarity is pretty essential when it comes to picture quality.
Any help would be most appreciated.
Best Regards
Phil

Hello Phil,
The following article provides a number of troubleshooting steps that I'd recommend looking into, especially testing with another display if possible, and resetting the MacBook Pro's parameter RAM and SMC.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Allen

Macbook Pro Beach Ball Problems

I have a '08 MBP that has the spinning beach ball showing up in all the apps during use and everything runs slower.
Web pages take 5-10 seconds to load.
Lightroom photos take 5-10 seconds to load. Commands and mouse selections take 4-5 seconds to respond.
It slows down even more with an external monitor being used.
The fan runs high 85% of the time.
Hard drive was replaced with an SSD about 2 years ago, which helped calm HD noise.
The HD has 15.5 GB left right now, but the beach ball problem has been there even with half the HD full.
Problem has been going on for a couple of years, but I've managed around it.
This issue occurs even with only 1 app running. For instance, I'll shut all apps except one application, and it still drags, whether that one app be Safari or LR.
I realize the MBP is older, but it used to be very responsive with the same apps. Never used to see the beach ball during app usage, only at startup of app if anytime.
I believe the RAM is maxed out for what this machine can handle at 4GB, but again, the system didn't slow down before.
I believe the problem may be some processes running in the background that are dragging down everything, but not sure what to look for.
Any advice any fixes are greatly appreciated.
Here is the EtreCheck:
Hardware Information: ?
MacBook Pro (15-inch 2.4/2.2GHz) (Verified)
MacBook Pro - model: MacBookPro3,1
1 2.2 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information: ?
GeForce 8600M GT     - VRAM: 128 MB
Color LCD 1440 x 900
Cinema HD 2560 x 1600
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 21:27:44
Disk Information: ?
SAMSUNG SSD 830 Series disk0 : (256.06 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 255.2 GB (15.5 GB free) (Low!)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information: ?
Apple Inc. Built-in iSight
X-Rite, Inc. i1Display3
Logitech USB Receiver
Apple Computer, Inc. Apple Cinema HD Display
Seagate Backup+ Desk 3 TB
S.M.A.R.T. Status: Verified
disk1s1 (disk1s1) <not mounted>: 262 KB
3 Seagate (disk1s3) /Volumes/3 Seagate: 3 TB (2.04 TB free)
Apple Computer Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] au.com.glassechidna.heimdall_usb_shield (6.0) Support
[loaded] com.aladdin.kext.aksfridge (1.0.2) Support
[not loaded] com.devguru.driver.SamsungACMControl (1.4.20 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungACMData (1.4.20 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungComposite (1.4.20 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungMTP (1.4.20 - SDK 10.5) Support
[not loaded] com.devguru.driver.SamsungSerial (1.4.20 - SDK 10.6) Support
[not loaded] com.jft.driver.PdaNetDrv (1.0.0d1) Support
[loaded] com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.roxio.TDIXController (2.0) Support
[not loaded] com.sandisk.driver.com_sandisk_SanDiskImageMate (1.0.17) Support
[not loaded] xxx.qnation.PeerGuardian (1.1.9) Support
Startup Items: ?
HP IO: Path: /Library/StartupItems/HP IO
Problem System Launch Daemons: ?
[failed] com.apple.Kerberos.digest-service.plist
[failed] com.apple.Kerberos.kdc.plist
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[running] com.aladdin.aksusbd.plist Support
[running] com.aladdin.hasplmd.plist Support
[loaded] com.bombich.ccc.plist Support
[loaded] com.google.keystone.daemon.plist Support
[not loaded] com.logmein.logmeinblanker.plist Support
[running] com.logmein.logmeinserver.plist Support
[loaded] com.logmein.raupdate.plist Support
[not loaded] com.palm.novacomd Support
[failed] com.tvmobili.tvmobilisvcd.plist Support
[running] com.xrite.device.xrdd.plist Support
[failed] xxx.qnation.PeerGuardian.kextload.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.google.keystone.agent.plist Support
[failed] com.logmein.LMILaunchAgentFixer.plist Support
[running] com.logmein.logmeingui.plist Support
[running] com.logmein.logmeinguiagent.plist Support
[not loaded] com.logmein.logmeinguiagentatlogin.plist Support
[running] com.sandisk.SanDiskImageMate.plist Support
[failed] com.tvmobili.artwork.plist Support
[loaded] com.xrite.device.softwareupdate.plist Support
User Launch Agents: ?
[loaded] com.adobe.ARM.[...].plist Support
User Login Items: ?
Scroll Reverser
iTunesHelper
iTunesHelper
LMILaunchAgentFixer
Connect360Helper
PdaNetMac
Music Manager
Canon IJ Network Scanner Selector2
Dropbox
Android File Transfer Agent
i1ProfilerTray
fuspredownloader
KiesAgent
HP Scheduler
Internet Plug-ins: ?
AdobePDFViewerNPAPI: Version: 10.1.10 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
EPPEX Plugin: Version: 3.0.5.0 Support
AdobePDFViewer: Version: 10.1.10 Support
LogMeInSafari32: Version: 1.0.935 - SDK 10.7 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.0 Support
CouponPrinter-FireFox: Version: Version 1.1.5
LogMeIn: Version: 1.0.935 - SDK 10.7 Support
Silverlight: Version: 4.0.50524.0 Support
Google Earth Web Plug-in: Version: 7.1 Support
AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.3.2.6 Support
o1dbrowserplugin: Version: 5.4.2.18903 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
Safari Extensions: ?
feedly-2
Greenhouse
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User iTunes Plug-ins ?
TuneUp Visualizer: Version: 2.2.0 Support
User Internet Plug-ins ?
fbplugin_1_0_3: Version: (null) Support
Move-Media-Player: Version: npmnqmp 071505000006 Support
BrowserPlus_2.8.1: Version: 2.8.1 Support
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
Picasa: Version: 1.0 Support
3rd Party Preference Panes: ?
BrowserPlus Support
Connect360 Support
DivX Support
Flash Player Support
Flip4Mac WMV Support
MacFUSE Support
MusicManager Support
Perian Support
Time Machine: ?
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 237.67 GB Disk used: 223.24 GB
Destinations:
Seagate Backup Plus [Local] (Last used)
Total size: 3 TB
Total number of backups: 42
Oldest backup: 2012-11-15 08:13:19 +0000
Last backup: 2014-09-01 15:11:17 +0000
Size of backup disk: Excellent
Backup size 3 TB > (Disk size 237.67 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
      11% WindowServer
      1% AdobeCrashDaemon
      0% i1ProfilerTray
      0% xrdd
      0% fontd
Top Processes by Memory: ?
500 MB Adobe Photoshop Lightroom 4
123 MB com.apple.WebKit.WebContent
102 MB Safari
82 MB Finder
70 MB WindowServer
Virtual Memory Information: ?
709 MB Free RAM
1.70 GB Active RAM
714 MB Inactive RAM
636 MB Wired RAM
1.79 GB Page-ins
28 MB Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Macbook pro, isight, imovie problem

im trying to use imovie to record video off my builtin isight camera. If i shart imovie, and select the magic movie option then my isight starts up and i can see the image on the screen, but there is a dialogue box open on the right hand side of the imovie screen that says 'searching for dv camera' this dialogue box searches for about 30 seconds and then claims no video device could be found!!!!! If i then click on ok, my isight turns off and i am left with a bland imovie screen. Very annoying. All my SMC and Firmware is fully up to date, All application upgrades installed. And i have no other programs open that use the isight camera. isight works fine in all other applications. Any suggestions?
Thanks
Macbook Pro 2.16 7200rpm Hd Mac OS X (10.4.6) Boy is It Hot

I just got a new imac with built in isight and am trying to learn how to record from isight too. I tried doing this with ichat open and it said there was no connection. I closed ichat and used the following directions and it worked.
The directions sound like it is for the external isight but the switch in the diagram is in the lower left of the imovie screen. Open imovie and try these directions:
To capture live video from an iSight camera:
Open the privacy shutter on your iSight. (For the external isight)
Click the mode switch to set iMovie HD to camera mode (Lower left of imovie screen, not on camera).
Click the camera icon to the left of the mode switch and choose iSight from the pop-up menu. (Make sure ichat is closed)
Click the Record With iSight button at the bottom of the iMovie monitor.
The video you see in the iMovie monitor is recorded as a clip in the Clips pane.
Click Record With iSight again to stop recording.
Click Record With iSight again to stop recording.
iMac-Intel Mac OS X (10.4.6)

Has anyone seen this MacBook Pro 15" 2008 problem before?

Hi. My MacBook Pro has developed a fault whereby a horizontal line appears on the screen, the mac freezes then a host of vertical lines gradually appear on the screen until it is obscured. Something similar happened in May last year and Apple charged me over £300 to repair it, replacing the 'mother board'.
I have so far taken it into the Apple shop twice in the last week (a two hour round trip). Both times they have opened it, cleaned it and declared it fixed. This time it lasted about an hour before happening again, although this time at least I've been able to restart it.
Has anyone seen this before, or have any advice about how best to proceed?
I have put a video of the symptoms here:
20120915 135612 - YouTube
Thanks for reading. This is my first post so apologies if I've rambled a bit!
Steve
MacBook Pro 15", late 2008.

I wasn't notified that you asked me a question or that there was a new post on this topic. I should have been, that bugs me.
Anyhow... Mr. Ah
The problem that some people, mostly with a certain video card, were having was when they updated from 10.5.4 to 10.5.5. For many of them the problem went away when they went through the hassle of reverting back to 10.5.4.
Did you +just recently+ update to 10.5.5? If you have, then their fix is for you too, going back to 10.5.4. If you have had 10.5.5 installed for a while now, and this just started happening, chances are good that it is your video card, or perhaps something affecting it like dust and dirt like DP says above.
If you have another start up drive, firewire or internal, and you had enough space on it you might consider installing a previous OS 10.5 on there and start up from it. If the problem went away you would know it's 10.5.5. Perhaps even if you started up from your OS disc the problem might go away and again you'd know it was 10.5.5. Apple was made aware of the problem on some machines and said they were going to come out with a fix, but I don't think they ever did.
Post back and say what the situation is, especially if you just recently updated to 10.5.5.
And post back with what kind of G5 you have, look in the "About this Mac" window.
Your card may be dying, but on the other hand it might be as easy as pulling it out, blowing it out, and putting the card back in again.

Macbook pro having multiple problems?

Today, my Macbook pro started freezing up while I was using safari. This happens to me often, so I just held the restart button like I usually do and restarted it (that always fixes it). Only this time, when the computer restarted, it didn't make the "dong" noise when it restarted. Then, it got stuck on the apple logo and the spinning loading thing forever. I tried holding the power button and restarting a few more times, but it didn't change anything. I then did a safe boot and was able to get back into my computer. However, there were several issues. For one, the sound doesn't work. It won't let me adjust it; it just shows a full volume bar but with a slashed zero. I've tried plugging in headphones, but that doesn't do anything. Images are also problematic. When I swipe side to side between desktops and the dashboard, the image is really choppy and constantly flashing and moving. On safari, my gmail was going to give me a seizure the way it was flashing, even when I wasn't moving the page. Other websites (particularly video playback) are also a problem. Lastly, some settings got screwed with in my Microsoft word 2010. My default line spacing is now different and my quotation marks and apostrophes are now automatically huge and in the style of some chinese font (even when using cambria!). Can anyone tell me what the **** happened to my computer and how I can fix it? Thanks!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" '/S*/*/Ca*/*xpc* >&- ||echo No' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors XPC\ cache );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 50 32 52;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

My new MacBook Pro has display problems

I am new to Mac. I had purchased a brand new MacBook Pro 13 inches with i7 processor on April2 this year, Within 10 days the display screen started to grey out and later on develop horizontal lines. I telephoned Apple support and when a telephonic solution became unlikely I was asked to take it to an Apple Authorized service centre in my town. The technician there could not clearly explain to me what was wrong with the system, but I understood him to say that he has reinstalled the graphics driver and the system was trouble free for a prolonged time thereafter (at the service centre). I also understood him to say that should the problem recur again, he would have to replace the motherboard. I was on a travelling tour for a week after this and was not able to test out this repair (I took my old windows system with me for the travel) To my utter dismay the problem has recurred again after 28 days of purchase. I have attached screenshots. The button for uploaing videos is greyed out therefore I will have to restrict myself to screenshots. All the three screen images occcur
in turn and the system becomes unusable and I have to use the poweroff button. The display problems start within 10 minutes of switiching on the system.
I took some time to discover these forums. The first time this problem occurred on my machin I posted this problem on mac-forums and I was advised to take it to an Apple store and let the apple genius bar worry about this one. I do not live wihtin any sort of manageable distance from such a place and the repair centre is an Apple Authorized Service Provider
Coming to the emotional aspects of this technological glitch. I feel like I have been hit by a truck.I had saved and scraped pennies to buy this dream machine and I believed I was escaping the ficleness of windows. But no windows system of mine (I have three) become so unusable
Will I have to spend time and effort to lug this machine to service centre to replace each of its component parts one by one ? Can I ever trust this machine to provide a presentation to an audience? What sort of an impression will I create if the system plays this trick on me in the middle of some presentation?

Shootis007, What is CC company? I googled CC and got many different answers.
I called Apple Support and told them my story and pressed for replacement and they told me repeatedly that there is no policy for replacement. The initial support person who attended my call asked me to take it to the seller and ask the seller for replacement. I dont think that is the way to go. I dont know what is his fault. He gave me a brand new system, the package was opened by me. Since I am new to Mac, I had taken a Mac user friend with me who showed me how to get started (right there in the shop) Neither the experienced Mac user friend nor I felt anything remiss at that time or later at the Seller level. Nevertheless I called the reseller and he explained his helplessness. I dont think it his fault at all.
Since I kept insisting on replacment I was put through to another support person who took pains to reassure me that I should get the defective part replaced and thereafter all will be well. For now I trust him. I have no other alternative
I really am puzzled. All you dear Mac users should know that the machine I dreamed of and really saved to purchase is giving me no end of troubles whereas my three windows machines sit there with their numerous stated deficiencies but gives me uninterrupted service

Retina MacBook pro video jumping!

HI all,
I have a Retina MacBook Pro 15", I have had it for about 6 months, I have noticed that the video jumps when playing at full screen.
I booked it in apple store today for the image retention problem and they were fantastic changed my screen same day. I showed the Genius a video taken on my iPhone of the screen jumping and he was baffled, he said he would look into it.
I received my rMBp back tonight with a sparkling new screen but I still have this problem.
i have noticed it does not do it on the "Best for Retina" screen resolution but i run at the scaled "More Space" resolution. as soon as I change to my resolution it jumps change it back and its fine. surely the machine should be designed to handle full screen playback at it supported resolutions shouldn't it?
Has anybody had this problem?
Has anybody dealt with Apple over this problem?
Here is a video of the jumping
http://youtu.be/qy1tcfPAkDo
Best Regards
Ben

HI all,
I have a Retina MacBook Pro 15", I have had it for about 6 months, I have noticed that the video jumps when playing at full screen.
I booked it in apple store today for the image retention problem and they were fantastic changed my screen same day. I showed the Genius a video taken on my iPhone of the screen jumping and he was baffled, he said he would look into it.
I received my rMBp back tonight with a sparkling new screen but I still have this problem.
i have noticed it does not do it on the "Best for Retina" screen resolution but i run at the scaled "More Space" resolution. as soon as I change to my resolution it jumps change it back and its fine. surely the machine should be designed to handle full screen playback at it supported resolutions shouldn't it?
Has anybody had this problem?
Has anybody dealt with Apple over this problem?
Here is a video of the jumping
http://youtu.be/qy1tcfPAkDo
Best Regards
Ben

MacBook Pro Video capture problem

Similar Messages

Maybe you are looking for