MacBook Pro wakes up and goes straight back to sleep
Sometimes when my MacBook Pro is asleep and I open the lid for it to wake up, it does wake up for a few seconds, but goes straight back to sleep. Does anybody know this issue or a - even better - a remedy.
Try a SMC reset.
DALE
Similar Messages
-
My MacBook Pro boots up and goes straight to blue screen
After the grey and the apple comes up, it goes straight blue screen. The only way it will work is if I go into safe mode. Can someone help me with this issue please?
Try a SMC reset.
DALE -
My macbook pro randomly switched off and wont turn back on. I have tried to charge it but it wont work. How can I get it to turn back on??
It's more than likely broken, a part has failed. You need to take it to a Apple store Genius Bar to be checked out and fixed. Or just buy a new Mac as to fix the one you have might be cost prohibitive. Especially if your warranty has expired.
-
iCloud mail does not reconnect in Mail on my MacBook Pro after sleep or after disconnecting and reconnecting my iPhone. This only happens when I use my iPhone as a 3G-modem and not when I am on Wi-Fi. The only solution seems to be to quit the Mail-application and restart it again. Then Mail reconnects to iCloud.
Hi horstp,
Given your description of the issue (works on other Macs), it may be worth trying to set up that account by itself in a new test user on the iMac to see if it can be isolated to a user-specific file. You may find the following article helpful:
Apple Support: Isolating an issue by using another user account
http://support.apple.com/kb/TS4053
Regards,
- Brenden -
Macbook pro will not restart. goes straight to disk utility
I was logging in and the MBP would not boot up without correctly. Came up to a Disk Utility recovery screen. Have gone through all the options from permissions repair to disk repair to reinstalling the OSX Lion (and it updated directly form apple site). The weird part is that much of the functions work, just incredibly slow. The dock is missing and won't come up. The system profiler after it runs, acts like there are no applications on the machine. It will ID and provide inof about the system, the disk, the CD/DVD drive, bluetooth, etc., but when "applications" is selected, it returns "no info"...this all sounds like a disk problem but I have much information on the disk I can't loose...HELP! After several tries I have managed to get it to the point of at least booting up off the HD and not just the CD. However, after putting in user password it just spins the color swirl for a very long time and then goes to the same grey desktop...
Because you haven't made a TM backup in a month, this presents a lot of problems, likely the easiest is to use another Mac and Firewire Target Disk Mode (Firefire 800/400 cable and adapter if needed) to get the latest copy of your files off the machine.
If the TimeMachine backup has 10.7.2 on it, you can boot from the TM drive that has Lion Recovery and use Disk Utility there to erase the drive and restore the TM image with, then boot and update your files from the other Mac.
http://pondini.org/OSX/RecoveryHD.html
You can also hold command and r keys and boot into Lion Recovery on the internal boot drive and attempt repairs there and a TM restore. -
I have the new macbook pro with retina and I am trying to back it up, with wd passport for mac and is telling me it is going to take 7days. Any Ideas? Im afraid that means there is something wrong with my hard drive. I have verified the disk and it says everthing is ok.
It seems to be a common problem that those drives don't perform well, at least not with Time Machine.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Post the messages timestamped from then until the end of the backup, or the end of the log if that's not clear.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into a message.
Some personal information, such as the names of your files, may be included — edit that out, too, but don’t remove the context. -
When I close the lid on my retina MacBook Pro with Thunderbolt and it goes to sleep, I cannot wake it without shutting it down and restarting it. Called Apple tech and they did not have a solution. Any ideas?
Try these places:
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
Mac OS X Help
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725
TimeMachine 101
https://support.apple.com/kb/HT1427
Mac OS X & Mountain Lion Community
https://discussions.apple.com/community/mac_os
https://discussions.apple.com/community/mac_os/os_x_mountain_lion?view=discussio ns
Recovery Mode
http://support.apple.com/kb/HT4718 -
I am currently running OSX 10.6.8 on my MacBook Pro. Can I upgrade straight to Yosemite and if I can what issues will I face?
1. It depends on what Mac model you have. If it's incapable of running Yosemite, installing an intermediate version won't help with that.
2. You'll lose the ability to run PowerPC software, and some other programs may also be incompatible. If something goes wrong, you might lose data; back your computer up first. There aren't any issues specifically associated with skipping versions.
(119335) -
I have a new MacBook Pro Mid 2012 and it goes into deep sleep when I disconnect if from AC power.
I have a new 13" MacBook Pro mid 2012 and it goes into deep sleep when it is disconnected from AC power. I have to press the power button to wake it up. Is this a known issue or is there something wrong with the MacBook Pro?
There are a few threads about this around. Its a known issue for 2012 non retina users, not sure about Apple. It should not work this way and Apple has not put out an update to fix it yet. Check out these threads for some workarounds. I think I saw if you reinstall and don't update one of the updates you get normal functionality back. Otherwise there are some terminal changes you can make to make it operate mostly normally. I made some changes in terminal.
https://discussions.apple.com/thread/4512384
https://discussions.apple.com/message/20436126#20436126#20436126 -
MacBook Pro won't stay asleep with external monitor attached. When sleep is selected from the Apple menu the computer will go to sleep only to continually wake up...go back to sleep...wake up...etc. every few seconds. This only happens when using the external monitor. Does anyone have any suggestions?
Mine does that too. The worst thing is when it goes to sleep, then wakes up and keeps running while the lid is closed and it is wrapped up in a case. I am afraid when the hot weather comes it is going to burn up. I am hoping Apple fixes it in the software or they may have a melted MBP to replace.
Then when I open the lid it is crashed running at fill tilt, pumping out heat to beat the band. I am forced to hold the button down and reboot.
I wiped my hard disk and reinstalled my OS, but it didn't help. I reversed my OS to 10.5.0 and it solved the DVI problem but still won't sleep. This post will probably be deleted by Apple, they did it a few days ago. I just don't know what to do, and I consider myself a real Apple expert. Just hoping you realize you are not the only one. -
Every time I start my Macbook it goes straight back to the login screen
Every time I start my Macbook it goes straight back to the login screen does anyon eknow what to do? I have already gone into safe mode and checked the start up folder was emty. I have pressed the shift key as well to do something suggested to me, but to no avail. Can anyone help please?
What version of Mac OS X is on the computer?
Try booting with the Option key held down. Do you see any icons of hard drives? -
Hi I do not want iTunes to open up automatically when I turn on my macbook pro. I tried going to System Preferences>Users and Groups>Login Items and then I took iTunes off the list but it still opens up automatically when I turn on my laptop. What should I do?
Hi r,
Make sure you close iTunes before shutdown. And you're quite welcome. -
Can someone please help me re-install my Creative Design 5.5 on my Mac? My MacBook Pro recently crashed and had to have the hard drive replaced. The back up from Time Machine is not reinstalling the program. Since I have the download paid, and codes, I need direction on how to reinstall -- HELP?
Hi bodegakc,
If you have the serial number then please use the below mentioned link to download the product you are looking for .
CS5.5
Also before installing Please go to Applications-->Utilities--> Adobe installers and if there is any uninstaller for CS5.5 , you can remove it and do a fresh install.
You can also use creative cloud cleaner tool before installing.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Thanks
Nikhil Gupta -
I have an OS X 10.6.6 MacBook Pro (Snow Leopard) and i am trying to format my whole hard drive (back to factory settings) from the original CD.
Can someone please give instructions?Welcome to the Apple Support Communities
To restore the MacBook Pro to factory settings:
1. Make a backup of your files because everything will be erased.
2. Insert the Snow Leopard disc and press the C key while your Mac is starting to start from the DVD.
3. Go to Utilities menu > Disk Utility, select Macintosh HD on the sidebar, go to Erase tab and erase the disk.
4. Close Disk Utility and install Mac OS X -
My MacBook Pro got wet and I lost all of my childs photos from the day she was born. Is there anyway I could get these pictures back from my iCloud? I actually care more for getting the photos back than I do my laptop. Please help! Thank
Welcome to the Apple community khnkOliver.
I assume these photos, or at least not all of them weren't in photo stream.
You should be able to recover your photos from a back up.
Maybe you are looking for
-
Problems with saving edited photos using Photoshop Elements 5.0 on WIndows 8.
Since a week I can not save the edited photos - when I try the communicate: "Caould not complete your request because of a program error" appeares. I had no problem with saving edited photos before, with the same software. My computer runs on Windows
-
Live Type Textures and Background
Does anyone know why when I import my live type titles, the background or textures do not transfer over into Final Cut Express? The fonts and the effects work, but the background does not transfer? Thanks for your help!
-
Serial Number not recognized for upgrade
I entered the Serial Number on the back of the box for Adobd PHhotoshop CS3, but received an error message which said it was invalid and to contact customer support. Does Customer Support monitor this Forum? How do I contact them?
-
How would you display a larger image of a thumbnail by clicking or rolling over the thumbnail?
-
Raising alerts if no message processed
Hi, I would like to to raise an alert if NO message is prossed in the scheduled window for eg : 3 - 5pm every day for particular receiver channel ? As I dont have any control on the IDoc sender. Please suggest Thanks Harsha