MacBook Pro will not dectect Linksys Router

I have recently aqquired a MacBook Pro and i'm at a loss as to why airport will not dectect my Linksys WRV54G wireless router, yet it will detect other secure and non-secure routers in my neighborhood. The MacBook will connect fine to the router via an eithenet cable and work correctly. I have an HP mobile workstation which works fine with the router wirelessly.
To date I have:
rebooted the router several times.
removed the WEP security from the router.
assigned the MacBooks mac address to the router allowing it permission.
I am at a loss as to why it will not dectect the router. I know airport is working fine and so is the router. Any help or suggestions would be greatly appreciated.

Have you tried a different channel?

Similar Messages

My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

try this.
get back into your router's settings and start deleting devices that are not connected to your router.
you can also delete the ones that are connected - they'll connect again.
on the DHCP side of it, increase the amount of users that can connect/log in to your router.
see if that sorts it out for you.
good luck.

My MacBook Pro will not open any application or program that requires internet, even though I am connected to the web.

My MacBook Pro will not open any app or program that requires Internet, even though I am connected to the web. I recently installed Norton AntiVirus and think it may have changed a setting that I couldn't find. I uninstalled Norton and it didn't help. Every time I open Safari, iTunes or any other program that tries to connect to the Internet, it crashes. Strangely enough, Skype still works, but nothing else.
I have OSx 10.6.8.
I have tried erasing plists, and all the standard troubleshooting, ie resetting modem, restarting computer, reloading Safari from disk.
Any help would be greatly appreciated. Thank you in advance.

Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Netspot
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
Mac OS X 10.6 Help: Solving problems with connecting to the Internet
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting
I uninstalled Norton and it didn't help.
To properly uninstall Norton software follow these instructions - Locate Symantic Solutions folder inside the Applications folder at the root level of your HD, launch the Symantec Uninstaller application, select the Symantec AntiVirus Corporate, Norton AntiVirus & Norton AntiVirus Auto-Protect entries and click the Uninstall button.
Confirm your decision when prompted and then enter your administrator password in the space provided.
Retart your computer & Norton should be gone for good.
If the above does not work, download a copy of Symantec’s RemoveSymantecMacFiles removal utility. This utility will launch Terminal & remove the Norton components.

MacBook Pro will not connect with Printer

My MacBook Pro will not connect to my HP Photosmart Printer, both are wireless. Receive a error message

What version of OS X? What router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Have Macbook Pro & 4th gen iPod Touch. Downloaded & installed iOS 4.3.2 yesterday. Upgrade went without a hitch, but now iTunes on My Macbook Pro will not open. I get an error that says "iTunes" Data too new to be used with this version of iTunes.

Have a Macbook Pro and a 4th gen iPod Touch. Downloaded and install iOS 4.3.2 yesterday. Upgrade went without a hitch, but now iTunes on My Macbook Pro will not open. I get an error that says --The file "iTunes Library" cannot be read because it was created by a newer version of iTunes--. I am running iTunes 10.1. I searched for Updates to my MacBook Pro (running 10.6.7), but comes back saying no updates available. WHAT IS GOING ON??

Is your computer still authorized in the Store menu in iTunes?
iTunes Store: About authorization and deauthorization
When I changed to my new MacBookPro I had to authorize it although I used TimeMachine to transfer my settings and data.
Did you try to deselect Wi-Fi syncing and enable it again after that?
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
Did you already transfer your purchases and manually started a backup?

Mid-2009 Macbook Pro will not turn on

Hi Folks,
so my mid-2009 15in Macbook Pro will not turn on. I updated the OS to Mavericks in December 2013. I'm from California, but I recently moved to the Guam/Marianas area where it is more humid and generally around 87 degrees F all day. For the past month my computer has worked fine, albeit I did notice the fan was running a little more than usual. I usually would just put it into sleep mode when I would finish using it (apparently a bad idea based off of reading other posts concerning humidity and, more importantly, heat). One day I finished using it, closed it and the next day went to open it; I could hear the fans start to work, but then it stopped. It hasn't turned on since. You press the power button and nothing happens. I tried all the troubleshooting stuff.
So, my question is this: what do you think is the problem? Moreover, how much do you think it could cost to repair it? My experience with computers suggests to me that it's probably a dead motherboard. I'm wondering if it's worth trying to salvage this thing or if it would be prohibitively expensive. There are no Apple stores in the area to take it in to get advice unfortunately.
Now, I just want to vent a little frustration. I have many apple products, and I've even switched my mother over to an apple computer, but now that I need some very basic support, apple doesn't provide a contact e-mail or a free chat? I think charging someone $19 for 'one time assistance' is ludicrous. I bet if I brought this into an apple store I could at least get some advice, and thus get some idea how I want to proceed with repairs or not. I suppose I'm also rather frustrated that my macbook, which I have been most happy with all these years, breaks because I go somewhere a little more humid and generally warmer? It would appear that the hardware failure is connected to the climate. This makes me skeptical about purchasing another mac if it can't handle a little humidity. (I have not spilled liquids on it, nor have used this computer while transitioning from an air-conditioned/humid location which could potentially cause condensation). I do not think I'm being unreasonable (yes I do think a $2500 computer should not fail after less than 5 years), but if you think I am unreasonable, please enlighten me.
Thanks for any help. I really appreciate it.
Ken

Ken,
the “Important Handling Information” in the little white manual that came in the box with your MacBook Pro states that its operating temperature range is from 50 °F to 95 °F (10 °C to 35 °C), and that its operating range of relative humidity is 5% to 90% (non-condensing). If your corner of the Pacific is outside of these ranges, the manual states that “Failure to follow these handling instructions could result in damage to your MacBook Pro”.
I have no idea what problem your MacBook Pro has; since you’ve tried all of the troubleshooting stuff, you’ll need to somehow get your MacBook Pro to a qualified service facility to diagnose the problem. If the logic board does need to be replaced, it would probably cost hundreds of dollars for a replacement, and you might find that purchasing a replacement used MacBook Pro of the same model to be price-competitive with just replacing your MacBook Pro’s logic board.
If you find Apple’s out-of-warranty policies unacceptable, then your only alternative to venting would be to purchase your next computer from a different company which has out-of-warranty policies more to your taste.

Mid 2010 Macbook Pro will not stay off or asleep

Hi,
I have a mid 2010 MacBook Pro will not stay turned off when I tell it to shut down. It will shut down just fine, but a few seconds later it will boot up again. This also happens when I try to close the lid (or just put it to sleep), it will work fine, screen/Apple logo on the back will turn off and the status LED will slowly pulse. However a few seconds later, the LED stops pulsing and the Apple logo will illuminate. If I open the lid I will be greeted with the log in page with zero delay (i.e. its been displaying for a while).
This has become problematic because the computer always be running. If I put it in my laptop bag the computer will get hot as ****. The only way to get it to really turn off is to let the battery die or remove the battery. But this computer does not have the externally removable battery so that is not a trivial process.
The symptoms exist in both Mac OS (Mountain Lion and Maveriks) and Windows 8/8.1. This makes me believe its something in the hardware (or at least a setting in the hardware), not software (I know Apple doesn't care what Windows does, but it is exibiting identical behavior).
I have reset the NVRAM and the SMC with no luck. When I reset the SMC I didn't get a good indication that anything happened though, and was wondering if that is normal. Resetting the NVRAM results in another restart, while its hard to tell if you actually reset the SMC. I reset the SMC by turning the computer off, then holding the power button when it tries to restart (this usually gives me a few minutes where the computer will actually stay off), then pressing shift, control, option and power at the same time and releasing them at the same time. This is how the Apple documentation said to do it. They did not mention how long the must be held though so I presume that doesn't matter.
Anyone experience this/have any ideas?
Thanks,
Jim

Btmm error "can not coonnect to cloud server" Facetime and IMessage " Could not sign in, check your network connection and try again". Which I have again and again...

My Mid 2010 MacBook Pro will not boot

My Mid 2010 MacBook Pro will not boot regularly, in safe mode, in recovery mode or from original OS DVD. Is this the logic board?
I've tried resetting the SMC and pram numerous times and even tried switching out hdd's to try and do a clean install on a new hdd.
If I attempt to boot regularly or from recovery drive the grey apple logo appears for a period before the screen goes black and the power LED operates as though in 'sleep' mode. I'm unable to wake it from this state and the same applies to booting in safe mode.
When attempting to boot from the OS DVD that was originally packed with the computer it just freezes on the language select option, this occurs with the other hdd's I have attempted to use.
Any other suggestions to get it working? I fear the logic board has gone and that the repair won't be worth the money.
Thank you in advance.

Hi JRC8.8,
It sounds like you have been on the right track in trying to troubleshoot this issue. You may want to see if your MacBook Pro will boot directly to the Apple Hardware Test, as outlined in the following article:
Apple Support: Using Apple Hardware Test
http://support.apple.com/kb/ht1509
Regards,
- Brenden

My Macbook Pro will not charge. I have tried other charges and nothing. Can the MagSafe port go bad? Is that expensive to repair?

My Macbook Pro will not charge. I have tried other charges and nothing. Can the MagSafe port go bad? Is that expensive to repair?

The port can fail. Internal boards can fail. Batteries can fail. All with the result that no charging occurs.
You can try Resetting the System Management Controller and you can try Troubleshooting MagSafe adapters.
But usually you will have to take the mac in to a service place for testing. It can get expensive, although occasionally it is not.
charlie

MacBook Pro will not connect to the internet

Suddenly, my MacBook Pro will not connect to the Internet--even when I take the cable from the Time Capsule and plug it into the laptop...
-Internet is good
–WiFi is connected
-both work with my iPad...

You should show WiFi:
Do you have it turned on?
Clinton

My MacBook pro will not connect to the Internet through wifi yet all other devices do

My MacBook pro will not connect to the Internet through wifi. I have several other wifi enabled devices and they are all connected to the Internet just fine... What could/would cause this?

Disable your AirPort and enable in a second. Or check, maybe you need to type in correct digits in; Settings/Network/Advanced/Configure...

The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?

I have recently switched from a PC to a MacBook Pro.
I have a large number of documents and photographs on a multiterrabite external drive, backed up on a second multiterrabite external drive.
Both external drives are formatted for MacIntosh. This has been verified by agents at an Apple store and also at Best Buy in two different cities.
This is the problem:
The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?
Also, the MacBook Pro will not allow me to rename multiple documents or photographs. I can click-and-rename a single one, but this is impossibly time consuming. I can batch-rename in iPhoto, but when I transfer the photographs to the external drive, the rename does not transfer.
I’m reduced to using my wife’s Toshiba to cut-and-past, rename, and transfer documents. It works perfectly. Is there any way to do this on the MacBook Pro?
Thanks!
Roderick Guerry
[email protected]

Roderick Guerry wrote:
The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?
No, this is a philosophical difference between Apple and Microsoft. Apple believes that it's dangerous to cut a file in case the user never pastes it; in that case the file is lost. Microsoft seems to not have this problem (if I remember Windows correctly) because they don't delete the originating file if it's cut but never pasted.
Even though Macs have a lot of keyboard shortcuts, philosophically Macs have traditionally been mouse-first. This applies to file copy operations. In your case, what a Mac user would do is open the source window, open the destination window (on your second drive), and then Command-drag the selected files from the source to destination window. This is because a normal drag would leave the originals behind, while adding the Command modifier key tells OS X that this is a Move, not a Copy, so don't leave the originals behind.
(In addition there are different rules for drag-copying within the same volume or between different volumes. If you drag between two folders on the same volume, the files are moved. If you drag between different volumes, the files are copied unless you hold down Command to delete the copies on the source volume.)
Roderick Guerry wrote:
Also, the MacBook Pro will not allow me to rename multiple documents or photographs. I can click-and-rename a single one, but this is impossibly time consuming. I can batch-rename in iPhoto, but when I transfer the photographs to the external drive, the rename does not transfer.
Two problems in this case. First, batch file renaming is not built into OS X unless you build something with Automator. However, there are many utilities that can do batch file renaming which you can find at macupdate.com or on the App Store. Since I work with media I often batch rename using one of the media managers I have lying around like Media Pro or Adobe Bridge (comes with Photoshop).
iPhoto is a database front end designed to shield the file system from the consumer and let them concentrate on creativity and sharing. As such it is often a poor choice for managing files directly. When you "transferred the photographs" chances are you moved the originals, not the ones iPhoto edited which are stored in a hidden folder.
Roderick Guerry wrote:
I’m reduced to using my wife’s Toshiba to cut-and-past, rename, and transfer documents. It works perfectly. Is there any way to do this on the MacBook Pro?
There will not be a way to do it exactly like Windows. As described above, there are ways to do it "the Mac way." If it is possible to remove judgment on which way is "better" you might find the Mac way to be acceptable, but of course sometimes we simply prefer what we're used to.

My macbook pro will not recognize my WD external hard drive 1tb

My macbook pro will not recognize my WD 1 tb external hard drive that I have as my time machine backup. I worked just fine for a long time now The only way I can see it is through Disk utility. And when I try to repair the disk it say it cant be repaired, and i need to back up files and reformat. All my backups are on the hard drive. How do I back up the back if I cant get it recognized? Uggghhhhh I have several years of info on the hard drive .. PLEASE HELP!!!

Hi cterry66,
Welcome to the Apple Support Communities!
I understand you would like to reset the user account password on your computer but do not know the original password. If you set up your Apple ID with that user account, you can use that Apple ID to reset your OS X user password. Please use the information provided in the attached article to complete the process.
OS X: Apple ID can be used to reset your user account password - Apple Support
Cheers,
Joe

Macbook Pro will not boot beyond grey screen. System freezes.

My Macbook Pro will not boot-up or get beyond the grey screen (with spinning gear wheel.) I've tried all the recommended actions: resetting PRAM, disk repair, permissions repair, re-boot in safe mode etc but still the problem persists. When viewing the safe-boot in verbose mode, the system seems to hang at the stage when it's checking the Airport & Ethernet - the last line on the page reads: "AppleBCOM5701Ethernet: 0 0 setFixedSpeed - logic error, speed any?"
Any ideas how to fix this without doing an Archive & Install?
I'm assuming that if I do an "Archive & Install" then I will lose all my Applications (VLC, Handbrake, MS Office for Mac etc.) Will this actually be the case? Will I lose them.
Any help gratefully received. Many thanks.

jfromplymouth wrote: ...I'm assuming that if I do an "Archive & Install" then I will lose all my Applications (VLC, Handbrake, MS Office for Mac etc.) Will this actually be the case? Will I lose them...
Archive and Install just affects the System files, so any apps you have should still be available afterwards. The Installer on the disk that came with your Mac, when you bought it, will tell you this before you proceed. Of course, you can always back out of the Installer if you feel chicken.
Notwithstanding it is still necessary to backup everything. You need to check that Time Machine is set to also backup your Applications folder. It might be set not to do this.
It may not be necessary to worry about this if you have the original installer disc(s). I think any stuff downloaded from iTunes etc can be re-downloaded. However, it's probably quicker to get Time Machine to backup your apps if you can afford the HDD space. It's bound to be quicker than re-downloading the stuff plus any updates. And of course there's those Apps that you have but forgotten about. What about them?

MacBook Pro will not boot

MacBook Pro will not boot. Just get grey screen. When I hold down control + R, I get blank blue screen.

Which model MacBook Pro do you have?
It's COMMAND and R that will take you to your Recovery partion, not Control and R.
If a later model, can you boot into Internet Recovery (booting whilst holding down the command, option and R keys)?
Clinton

MacBook Pro will not dectect Linksys Router

Similar Messages

Maybe you are looking for