Macbook pro will not display screen when turned on

Can someone please help me figure out the issue I am having with my Macbook Pro I got it late 2008 or early 2009. Never had an issue with it till about 6 months ago. When I turned it off and then turned it back on again later it would always display a black screen even though i could hear it running. I did everything I could think of to make it turn on completely. I would completely charge the laptop, I would repeativly take the battery out and put t back in ect. Most the time it would turn on after a few times of doing something like that. But ever since it started happening it has taken longer and longer for it to decide to turn on completely. So usally never turn it off, but sometimes i drain the battery and donj't have a chance to plug it before it turns itself off.
I use it for work as a graphic designer and the tec company that the company uses offered to take a look at it. ( They are a PC company) . It so happened that one of the guys that works there has a macbook pro around the same age ect. He suggested that i replace my battery so we did. He said that his macbook started to do the same thing and that he had no other choice but to get the motherboard replaced. Is that what I have to do too? I use this coputer for all of my work so I need to have it back in a reasonable amount of time. What should I do to get the problem fixed? What are the steps I should take to ensure that the problem is takem care of?
Thank you for any help!!!!

Hi S,
Run Apple Hardware Test on it if you haven't yet.
If there is an Apple Store convenient to you, make an appointment with the "genius" bar for potential diagnosis (free).

Similar Messages

My MacBook Pro will not start. When I started it goes to a gray screen with the Apple logo and has the spinning dial. When I started in safe mode it will not start. In safe mode it as an error message that says MacBook Launch_msg():Socket is not connected

My MacBook Pro will not start. When I started it goes to a gray screen with the Apple logo and has the spinning dial. When I started in safe mode it will not start. In safe mode it as an error message that says MacBook Launch_msg(): Socket is not connected

If running 10.7 or later hold down Command-R at Startup.
This should invoke recovery Mode.
Choose Disk Utility.
Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
If errors, run again until it comes clean or gets stuck.
Report any error messages.

My MacBook Pro will not powerup (even when connected to power supply).

My MacBook Pro will not powerup (even when connected to power supply). The caps lock key is the only light on.

Hi PatB11902,
Thank you for visiting Apple Support Communities.
If your MacBook Pro does not seem to power on, but the caps lock key will light up when you press the caps lock key, you are likely seeing a video issue.
There are several steps that can help troubleshoot this behavior, found at this link:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Start with these steps:
Reset the system
You can reset the Mac's parameter RAM and SMC.
Start up in Safe Mode.
If your Mac does not start up normally after these steps, here are some additional tips that can help:
Troubleshooting: My computer won't turn on - Apple Support
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
Sincerely,
Jeremy

My macbook pro will not start up or turn on. any suggestions?

My macbook pro will not start up or turn on. Any suggestions?

I had the same issue I bought my MacBook Pro in Jan. my harddrive was bad and they had to replace it. I know the guy held down the shift botton for a little then pressed the power botton while still holding down the shift botton and it turned on but not completely since my hard drive was bad.

MY G3S iphone will not display screen to turn on, If I keep my finger on the home button it vibrates and itunes come on still w no screen display

My G3S iphone will not display screen to turn on. If I hold down home button itunes comes on but screen still doesn't display. Volume works but, I can't turn phone off either. HELP!!!

I tried to do this and it was not successful. If I restore to factory settings through computer will I also lose my cellphone number? I'm not worried about apps or anything those are fine. I just need to know if my phone will no longer be registered with my Verizon number.

TS3274 My ipad display will not function, the screen will not display anything when turned on, you can see that the screen lights up but it is completely black

The screen on my iPad will not display, the screen lightens up when powered on but the screen stays black, any fix for this that I can do at home?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

My MacBook pro will not start up. when I boot up, it stays on a white screen

I have a MacBook pro. My hard drive went out and I recently put a new one in it. Now when I Try to turn it on, it stays on a white screen and says loading but never does. I have Mac OS X install disc 1 and 2, and says when you put the cd in to hold down c, but every time I try, it just ejects the cd. Please help!!!Not sure of what operating system it has, or if it even has one. It had Mac OS X Snow Leopard. I am complete rookie to working on apple in general.

Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

MacBook pro will not charge even when the charger is plugged in and working

So this is a strange one.
I have been using my MacBook pro for a lot of film editing and motion graphics. Recently, I noticed that my battery kept going down, even when charging. I thought nothing on it and kept using it. After around 4 hours, the battery went from 90% to 23% WHILE plugged in. This got me nervous. When I plug in the MagSafe charger, the light comes on and I get the "charging" symbol in my toolbar. The light turns orange and then, after a few minutes, the power starts to go down instead of up.
I have had this laptop since Christmas 2012 and this has never happened before. The laptop does charge, but only when I am running no application, when the screen is shut or when the laptop is powered off. Bear in mind that right now, I am on Firefox, that is the only application open, yet the charge is still going down. I assumed it was because I was using Premiere CS6, After Effects CS6 and Cinema4D, but now even when they are not open, the batter will not charge when I am using the laptop.
What is going on? Is in the charger? Any help would be greatly appreciated and I am starting to stress!
Thank you everyone for reading,
-Rory Campbell
UPDATE: I am currently only running Firefox and Finder. Now the laptop is charging as usual. However the second I open up Premiere, After Effects etc, it goes down. I have no idea what is going on!

Try resetting the PRAM and SMC. If you don't know how to, don't worry. They're very easy to reset. Just google how to do it. If that doesn't work, the only thing I would suggest is to take both the laptop and the charger to your local genius bar to have them examined. If it's less than a year old, apple should replace whatever is wrong with it as long as it was a factory defect.

My MacBook Pro will not boot. When I inserted the OSx installation DVD, there is no hard drive to select. I can't eject the DVD either. Do I need to reinstall the operating system? Please help!

I forgot to mention that there is a grey screen on startup also a flashing folder with a question mark. I have tried the solutions offered on these forum pages. I cannot get past the disk utility screen.

Regarding the DVD in the optical drive:
Credit Kappy.
kevsgroove wrote:
I forgot to mention that there is a grey screen on startup also a flashing folder with a question mark. I have tried the solutions offered on these forum pages. I cannot get past the disk utility screen.
The MBP cannot find the OSX, and either the HDD or connector has failed. If you can get the installation DVD to work, start the installation process and when the menu bar appears on the display, select 'Utilities'. From the drop down menu, select Disk Utility>First Aid and run 'Verify' and 'Repair'. If unsuccessful, a new HDD is in your future.
If you cannot get the DVD to function, then a trip to an Apple store is your best option.
Ciao.

My MacBook pro will not shut down when I click the shut down icon only shut down by holding down the button

My MacBook wil not shutdown when I click on the shutdown icon I just restart it self

Have you tried holding the power button down for several seconds? I would try the force quit as mentioned earlier first, or go to the Activity Monitor in Applications>Utilities and try force quit there.

My macbook pro will not charge or turn on. When I plug in the charger nothing happens and the light doesn't turn on. What can I do?

My macbook pro will not charge or turn on. When I plug in the charger nothing happens and the light doesn't turn on. What can I do?

Some basics please, what vintage is your MBP, have you plugged anything else into the wall socket to verify that it is live? which light doesn't turn on, the charger or the MBP?
Hold the power button down for 15 seconds, wait for 2 then press it normally and see te MBP it turns on

My macbook pro will not start up. stuck on grey loading screen and spinning dial. HELP

my macbook pro will not start up. stuck on grey loading screen and spinning dial. i shut it down last night and now when i try to turn it on it will not get past this page. lights and sounds work but nothing happens. please help

Power it down by holding the power button down. Then try to power it up again. Post back. It would help if we knew what OS you are running, the model MBP...

Mid-2009 Macbook Pro will not turn on

Hi Folks,
so my mid-2009 15in Macbook Pro will not turn on. I updated the OS to Mavericks in December 2013. I'm from California, but I recently moved to the Guam/Marianas area where it is more humid and generally around 87 degrees F all day. For the past month my computer has worked fine, albeit I did notice the fan was running a little more than usual. I usually would just put it into sleep mode when I would finish using it (apparently a bad idea based off of reading other posts concerning humidity and, more importantly, heat). One day I finished using it, closed it and the next day went to open it; I could hear the fans start to work, but then it stopped. It hasn't turned on since. You press the power button and nothing happens. I tried all the troubleshooting stuff.
So, my question is this: what do you think is the problem? Moreover, how much do you think it could cost to repair it? My experience with computers suggests to me that it's probably a dead motherboard. I'm wondering if it's worth trying to salvage this thing or if it would be prohibitively expensive. There are no Apple stores in the area to take it in to get advice unfortunately.
Now, I just want to vent a little frustration. I have many apple products, and I've even switched my mother over to an apple computer, but now that I need some very basic support, apple doesn't provide a contact e-mail or a free chat? I think charging someone $19 for 'one time assistance' is ludicrous. I bet if I brought this into an apple store I could at least get some advice, and thus get some idea how I want to proceed with repairs or not. I suppose I'm also rather frustrated that my macbook, which I have been most happy with all these years, breaks because I go somewhere a little more humid and generally warmer? It would appear that the hardware failure is connected to the climate. This makes me skeptical about purchasing another mac if it can't handle a little humidity. (I have not spilled liquids on it, nor have used this computer while transitioning from an air-conditioned/humid location which could potentially cause condensation). I do not think I'm being unreasonable (yes I do think a $2500 computer should not fail after less than 5 years), but if you think I am unreasonable, please enlighten me.
Thanks for any help. I really appreciate it.
Ken

Ken,
the “Important Handling Information” in the little white manual that came in the box with your MacBook Pro states that its operating temperature range is from 50 °F to 95 °F (10 °C to 35 °C), and that its operating range of relative humidity is 5% to 90% (non-condensing). If your corner of the Pacific is outside of these ranges, the manual states that “Failure to follow these handling instructions could result in damage to your MacBook Pro”.
I have no idea what problem your MacBook Pro has; since you’ve tried all of the troubleshooting stuff, you’ll need to somehow get your MacBook Pro to a qualified service facility to diagnose the problem. If the logic board does need to be replaced, it would probably cost hundreds of dollars for a replacement, and you might find that purchasing a replacement used MacBook Pro of the same model to be price-competitive with just replacing your MacBook Pro’s logic board.
If you find Apple’s out-of-warranty policies unacceptable, then your only alternative to venting would be to purchase your next computer from a different company which has out-of-warranty policies more to your taste.

Macbook Pro will not boot beyond grey screen. System freezes.

My Macbook Pro will not boot-up or get beyond the grey screen (with spinning gear wheel.) I've tried all the recommended actions: resetting PRAM, disk repair, permissions repair, re-boot in safe mode etc but still the problem persists. When viewing the safe-boot in verbose mode, the system seems to hang at the stage when it's checking the Airport & Ethernet - the last line on the page reads: "AppleBCOM5701Ethernet: 0 0 setFixedSpeed - logic error, speed any?"
Any ideas how to fix this without doing an Archive & Install?
I'm assuming that if I do an "Archive & Install" then I will lose all my Applications (VLC, Handbrake, MS Office for Mac etc.) Will this actually be the case? Will I lose them.
Any help gratefully received. Many thanks.

jfromplymouth wrote: ...I'm assuming that if I do an "Archive & Install" then I will lose all my Applications (VLC, Handbrake, MS Office for Mac etc.) Will this actually be the case? Will I lose them...
Archive and Install just affects the System files, so any apps you have should still be available afterwards. The Installer on the disk that came with your Mac, when you bought it, will tell you this before you proceed. Of course, you can always back out of the Installer if you feel chicken.
Notwithstanding it is still necessary to backup everything. You need to check that Time Machine is set to also backup your Applications folder. It might be set not to do this.
It may not be necessary to worry about this if you have the original installer disc(s). I think any stuff downloaded from iTunes etc can be re-downloaded. However, it's probably quicker to get Time Machine to backup your apps if you can afford the HDD space. It's bound to be quicker than re-downloading the stuff plus any updates. And of course there's those Apps that you have but forgotten about. What about them?

MacBook pro will not boot up. Blank screen with message File is possibly corrupted. Checksum does not match etc

MacBook Pro suddenly will not boot up. Blank screen with message File is possibly corrupt. Header checksum does not match, etc

Hi s.cheslik,
It seems your MacBook Pro will not boot properly and it displaying an error message. Based on the information you have provided, it appears your MacBook Pro needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
Apple - Support - Service Answer Center
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

Macbook pro will not display screen when turned on

Similar Messages

Maybe you are looking for