Macbook Pro will not load after TM restore

I have a Macbook Pro 4,1 and the HD was making noise so it was replaced with a Seagate 500 GB 7200 rpm and after I booted from the Install DVD and went through the Restore From Back Up in the Utilities the machine copied my last back up. However, after it told me to restart the machine, it begins to load and the gives me a gray screen with "You need to restart your computer. Hold down the power button for several seconds or press the restart button" I then reinstalled OS X and was able to see everything on the back up drive but I am needing the full system back up due to programs and the like. Any suggestions? Thanks

Hi, and welcome to the forums.
You're describing a +*kernel panic.+*
There are four main possibilities:
The new drive was not set up properly. See Kappy's post on +Extended Hard Drive Preparation:+ http://discussions.apple.com/thread.jspa?messageID=10768743&#10768743
There was something else wrong with the hardware besides the internal HD. Run the +Apple Hardware Test,+ on one of the discs that came with your Mac. It will have instructions printed on it in very tiny type.
Your backups are corrupted. While booted from your Leopard Install disc, use +Disk Utility+ to do a +*Repair Disk+* (not permissions) on your TM drive.
The problem with the hard drive corrupted something on it, which was copied to your backups. Try the restore again, from an earlier backup.
If none of those works, post back with the results and we'll try a workaround.

Similar Messages

MacBook Pro will not boot after software update

MacBook Pro will not boot after doing an Apple Software Update (of course they will not help you). MONEY, MONEY, MONEY is the name of the game. They can cause your computer to crash and still charge you!
Does anyone have an answer to why my computer is showing a little gear spinning for hours? I have tried several things with NO luck.
Thanks-

Run through the list of fixes here
Step by Step to fix your Mac

My MacBook Pro will not load

My MacBook Pro will not load. I get the white screen with spinning rainbow for several minutes. Once I get the log-in screen it takes several more minutes of the galaxy screen before anything happens. When I am finally able to click the mouse on an application, I get the spinning thing again and nothing loads. The only thing I can do is turn the computer off by holding down the power button.

You might have an older model that came with disks. In that case, put the disk in and boot while holding down the C key. Run Disk Utility from there.

MacBook Pro will not load Facebook

MacBook Pro will not load Facebook, pictures on Pinterest, and will not play any Youtube videos. I already checked for software updates and it is still not working. This is happening in both firefox and safari.

tanyafromva wrote:
MacBook Pro will not load Facebook, pictures on Pinterest, and will not play any Youtube videos. I already checked for software updates and it is still not working. This is happening in both firefox and safari.
You have to do more than just check. If flash player is out dated, you must download & install.

MacBook Pro will not load start up properly

My MacBook Pro 2012 will not load properly after I took it to the apple store and they ran test on it. When I boot it up I get the gray screen with the loading bar. I can get into disk utility. However I don't believe they messed with anything and it was wirking fine in the store

Try:
Mac OS X: Gray screen appears during startup
BTW, this is the Mac Pro desktop forum

My Macbook Pro will not load past grey Apple screen...

Last night my Macbook Pro froze so I closed it and went to bed. Today when I opened it, it was still frozen, so I held down the power button and rebooted it. It got as far as the grey Apple screen with the spinning wheel and will not load any further than that. I've rebooted a couple times since and it continues to do the same thing, stays on the grey screen forever.
I searched this problem on the Apple Support Communitites and none of suggestions (holding Shift after the startup tone, holding Command+R) have worked so far. Is there any way to fix this problem without losing my data or having to pay to talk to Apple Support? PLEASE HELP! :(

Zzoozu wrote:
None of that made sense to me or helped me. Anyone else? Maybe someone who has answers dor someone not a computer genius?
Then we can't help you as we need you to be able to help yourself and the instructions are complicated and long to paste here over and over again for the same proceedure.
Hire the services of a local Mac computer repair before you delete your data by accident.
You can jump down and do #8, that might clear the issue right away, but some programs are not going to work and require updating or reinstalling again.
..Step by Step to fix your Mac

Macbook pro will not restart after failed disk repair

This has happened twice in one week.
A routine disk verify was performed and returned errors. I reboot into the recovery drive and run disk utility. To validate the first finding, I run disk verify again. Same failure. Then I run repair disk. Disk repair fails. After this, the system will not boot. Now, even the disk utility 'sees' the main particitian, but it's grayed out. when i go to retore Lion, the main partition is not seen at all.
The kicker is that two different hard drives are involved. The first is a 500 gb Western Digital and the second is a 750 gb seagate. System is a mid-2009 MBP with 8gb ram.
I performed a full system backup this weekend but do not have it with me and will not have access to it until this weekend. Any help out there? Or am I just screwed?

Oh by the way, a mid-2009 MacBook Pro would not have 10.4.6. In fact it might not even have 10.6.4. 10.6.4 didn't get prebundled until June 15, 2010. So where you get 10.4.6 on your signature, that confused people as to what you really have.

Macbook pro will not reboot after updates

Macbook pro retina display will not restart after iupdates installed

Which updates did you install?
Exactly what happens when you try to restart? If you are getting any error messages what do they say?

My MacBook pro will not load past the grey screen with the spinning wheel. What do I do?

My MacBook will not load past the grey screen with the spinning wheel of death. Anyone have any solutions?

Invoke Safe Mode by holding down the shift Key as you restart. This will do a Disk Utility "Repair Disk" as it starts up (so it takes a few minutes longer) and then load with minimal extensions loaded, and request your login username and password, even if you normally do not use them to log in.
Safe Mode runs the screen using simple, unaccelerated commands. Most things are available in Safe Mode, but things that rely on extensions will not be.
Acomputer that works in Safe Mode, but fails again after you restart, often implicates your extensions and add-ons.

Macbook Pro will not boot after full time machine restore

I have a 15-inch Macbook Pro, current model with the i7 processor, which I purchased in August 2010. Last week, when I tried to turn it on, it would not boot (just got to the gray screen with the Apple logo and spinning wheel). I took it in for repair and was told that it had a bad hard drive. The hard drive was replaced and I got the computer back yesterday.
Everything looked good, it turned on, so I did a complete restore from my Time Machine backup on my Time Capsule, following the instructions on this page: http://docs.info.apple.com/article.html?path=Mac/10.6/en/15638.html
The restore was successful and the computer prompted me to restart. I clicked the button to allow the restart and now I am back to the gray screen with the Apple logo and spinning wheel. It won't boot again.
I also looked at this discussion (http://discussions.info.apple.com/message.jspa?messageID=10924233) and it sounds like the person here was able to get his computer to work after doing the Time Machine restore in the same process I used, so I don't know what else to do.
I don't live near an Apple store, so it would be great if I could figure this out myself. Thanks for any help!

skylaneval wrote:
I have a 15-inch Macbook Pro, current model with the i7 processor, which I purchased in August 2010. Last week, when I tried to turn it on, it would not boot (just got to the gray screen with the Apple logo and spinning wheel). I took it in for repair and was told that it had a bad hard drive. The hard drive was replaced and I got the computer back yesterday.
Everything looked good, it turned on, so I did a complete restore from my Time Machine backup on my Time Capsule, following the instructions on this page: http://docs.info.apple.com/article.html?path=Mac/10.6/en/15638.html
See #E8 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).

Macbook Pro Will Not Boot After Full Timemachine Restore

Hope someone can help. I upgraded my HD and attempted to restore from time machine. Everything appears to have worked well and the restoration was a success according to what the computer says. However, when I go to reboot I hear the startup sound then the apple pops up on the screen followed by a kernal panic error and the black box telling me that I need to hold down the start button and restart. I've tried resetting the pram, reinstalling from TM again and a couple of other things but it won't start up. I tried doing a clean install and it worked fine then I migrated files from my TM backup and that worked fine as well. However, that's not what I'm looking for, I wanted to get the machine exactly the way it looked before the upgrade and I thought TM was supposed to do that. I've read other forums were people have done it with no problems and am completely stumped at why it is not working. If anyone can shed some light I'd appreciate it.

I booted with the CD and after selecting the language, went to the utilities pane and used the partition feature.
Last night in desperation, I booted back to the CD and once again told it to do a full restore from TM. This was the third time that I had done it so far. The previous two times I had gone into the partition feature and partitioned the drive first. This time I skipped that step and just told it to restore from TM. It said if it did this it would erase everything on the drive. I agreed and let it do its work. This morning it once again, as in both previous times, said it had restored from TM successfully. I told it to restart and lo and behold, it booted and everything is just as I had it on the other drive.
Needless to say, I'm confused but happy. I just wish I knew why it would not boot after restoring the previous two times? Maybe it just wanted me to spend more money:) I tried booting today only after I had gone to frys electronics and bought a SATA to USB cable and cloning software.
Anyway, thanks for your help and if anyone knows why it wouldn't boot, let me know. It would be good to know for the future just in case. For anyone else having this trouble, keep trying. Third time was a charm for me.

Macbook pro will not boot after snow leopard upgrade

My GF has had a macbook pro since mid 2008. It's been running like a champ since I've known her for the past 3 years with no issues. It has/had OSX 10.5.8 installed. We tried to consolidate all our pictures from all our apple devices and realized she didn't have an icloud on the old 10.5.8 OSX. So I called apple and they told me to order and install the snow leopard OSX 10.6 first and then upgrade to lion etc after that, Well we got the disk yesterday popped it in to install and it's been a disaster.... the computer shutdown for what looked like a normal restart during the installation process and never booted back up. Attempts to manually reboot leave us locked on a grey apple logo screen with spinning gear indefinately whith the Snow Leopard disk installed during boot up. With the disk removed I get the flashing file folder with a question mark. I called apple support we tried all the PRAM and SMC resets and then decided that we should go to the Genius Bar once all those failed. After an hour and a half drive to the nearest genius bar we were told that the we suddenly had a hardware issue which just happened to coincide with the new OS installation.... I'm not buying it and am looking for some help. The macbook was running like a champ until we inserted a disk recommended by apple... Any takers?

You have a five year old computer, so a failing hard drive at this point is not so strange. You have a couple of options you can try. Start with this one, but if it does not work you will have to erase the hard drive. I hope you have a backup of all your files.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

MacBook Pro will not boot after switching graphics cards

Dear All,
I have a late-2008 unibody MacBook Pro. I have had it since April 2009, and I have not encountered any real problems with it.
Yesterday, I switched to the 9600 graphics card for the first time since purchasing the machine. It logged me out as expected, but then proceeded to flash a blank blue screen at me for 20 minutes. Assuming that this was not normal, I powered down the computer by holding the power button. I powered it on again, and it will not get past the Apple symbol screen with the loading whirligig. I left it on for seven hours (overnight), and no change.
I booted it from the install disc and ran the Disk Utility verify and repair. It either gives me no problem or a block count error, which goes away when I run repair. I tried running verify on permissions, but this gives me a "failed to exit" or some such error, same with repair permissions. Restarting gives me the same apple logo screen until forever.
I've tried resetting PRAM, doing the battery removal and holding power button for 5 seconds, I've tried booting in safe mode (it won't), and doing an archive and install (which it can't do either, as it can't access my HDD or something). I've run the disk utility verify and repair several times.
I unfortunately don't have a recent backup (slapping myself), so I'm open to suggestions before going into despair over my $2600 paperweight before doing an erase and install...
Thanks in advance!
PS: is there a way to open the computer in target disk mode via the install cd so that I CAN back it up?
Message was edited by: Kaklz

Thanks, Joe. That may be an option if all else fails. I don't currently own an enclosure, so I am looking for an alternative before spending any money (I know, "frugal Apple user" is unheard of, but...).
I do have an old G3 tower, which I am using in the meantime, so if I can use this to open my MBP in target disk mode (or some other way of making a backup), I'd be overjoyed!

Macbook pro will not start after login

My MacBook Pro (late 2011) with Mountain Lion OS will not start up after my login. All I get after logging in is the spinwheel forever. It will start from guest user. PRAM reset doesn't help. Any suggestions?

Adam,
Try a safe boot, power up holding the shift key note this will take longer so be patient hold the shift till you see the progress bar and try to login. If it works try logging out and logging in normally.
There are some updates availabe that you might want to install.
see here
http://support.apple.com/kb/TS4476
you should probably install yhis update as well
http://support.apple.com/kb/DL1640

Macbook Pro will not load OS and will not boot from Install Disk

When I try to turn on my macbook pro it goes to the gray logo screen with the spinning gear however it does not progress from there and then after several minutes it proceeds to restart itself and the same process repeats itself. I have tried to boot into single user mode with success and have run /sbin/fsck -fy and that has returned that the volume appears to be ok. However, when I hit reboot it returns to the same process of the gray screen and spinning gear to black screen which repeats. When I boot into verbose mode it progresses to AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RXMAXLE 1024, TXMAXLE 768, STMAXLE 3328 then it stalls for several minutes and then it shows continuing
synchronizing disks... Killing processes
then it says some other stuff to fast to read.
When I try to boot from the install disk it will not boot from holding the c key it goes through the same aforementioned cycle. When using option to boot I can see the Disk then when I select it the cycle happens again.
Also I have XP installed and I am able to boot into that successfully. Any help would be greatly appreciated.
Not sure if I left anything out
-bryce

Welcome to Apple Discussions.
Do you have multiple Accounts defined on that system? The last time you successfully were running, did you run from the Account with Administrator privileges?
Do you have another computer from which you could boot and connect the Macbook Pro in Target Disk Mode to take a look at the drive from your working machine? Perhaps you can run Disk Utility from the working machine and point to the hard disk on the failing Macbook Pro.
Message was edited by: Rick Lang

Macbook Pro will not load after TM restore

Similar Messages

Maybe you are looking for