Macbook pro will not login after typing in password.

Whenever I type in the password, pressing enter will just highlight the password I typed in and do nothing. Whenever I click the enter button, nothing happens either.  I can still use the media keys and play songs through spotify... I just cannot login.  Whenever I hold the power button down, nothing happens either, I can't even turn it off.

I closed the laptop, came back and opened it, and that's how the problem happened.

Similar Messages

  • MacBook Pro will not boot after software update

    MacBook Pro will not boot after doing an Apple Software Update (of course they will not help you).  MONEY, MONEY, MONEY is the name of the game.  They can cause your computer to crash and still charge you! 
    Does anyone have an answer to why my computer is showing a little gear spinning for hours?  I have tried several things with NO luck.
    Thanks-

    Run through the list of fixes here
    Step by Step to fix your Mac

  • Macbook pro will not restart after failed disk repair

    This has happened twice in one week.
    A routine disk verify was performed and returned errors.  I reboot into the recovery drive and run disk utility.  To validate the first finding, I run disk verify again. Same failure.  Then I run repair disk.  Disk repair fails. After this, the system will not boot.  Now, even the disk utility 'sees' the main particitian, but it's grayed out.  when i go to retore Lion, the main partition is not seen at all. 
    The kicker is that two different hard drives are involved.  The first is a 500 gb Western Digital and the second is a 750 gb seagate. System is a mid-2009 MBP with 8gb ram. 
    I performed a full system backup this weekend but do not have it with me and will not have access to it until this weekend.  Any help out there?  Or am I just screwed?

    Oh by the way, a mid-2009 MacBook Pro would not have 10.4.6.   In fact it might not even have 10.6.4.   10.6.4 didn't get prebundled until June 15, 2010.   So where you get 10.4.6 on your signature, that confused people as to what you really have.

  • Macbook pro will not reboot after updates

    Macbook pro retina display will not restart after iupdates installed

    Which updates did you install? 
    Exactly what happens when you try to restart?  If you are getting any error messages what do they say? 

  • Macbook pro will not start after login

    My MacBook Pro (late 2011) with Mountain Lion OS will not start up after my login.  All I get after logging in is the spinwheel forever.  It will start from guest user.  PRAM reset doesn't help.  Any suggestions?

    Adam,
    Try a safe boot, power up holding the shift key note this will take longer so be patient hold the shift till you see the progress bar and try to login. If it works try logging out and logging in normally.
    There are some updates availabe that you might want to install.
    see here
    http://support.apple.com/kb/TS4476
    you should probably install yhis update as well
    http://support.apple.com/kb/DL1640

  • My macbook pro will not login unless I type my password, hit return, then shut it and reopen it. How do I fix it?

    Hi, I've had this problem for a little over three weeks now. It all started happening when my MacBook Pro froze in the middle of a show on netflix. I restarted the computer and logged in after much time, only to discover annoying windows asking for a keychain password. I typed in the password only for it to reappear moments later and they would not go away. I tried every password in existence and ended up just moving them to the side of the screen so I could continue using my macbook. Then, the next day, my macbook would not login. I shut it and when I reopened it, it was logged in. Now, the windows randomly pop up and my computer still won't login unless I type the password, shut it and reopen. Is there any way to fix this?

    Have you tried holding the power button down for several seconds? I would try the force quit as mentioned earlier first, or go to the Activity Monitor in Applications>Utilities and try force quit there.

  • Macbook pro will not boot after snow leopard upgrade

    My GF has had a macbook pro since mid 2008.  It's been running like a champ since I've known her for the past 3 years with  no issues.  It has/had OSX 10.5.8 installed.  We tried to consolidate all our pictures from all our apple devices and realized she didn't have an icloud on the old 10.5.8 OSX.  So I called apple and they told me to order and install the snow leopard OSX 10.6 first and then upgrade to lion etc after that,  Well we got the disk yesterday popped it in to install and it's been a disaster.... the computer shutdown for what looked like a normal restart during the installation process and never booted back up.  Attempts to manually reboot leave us locked on a grey apple logo screen with spinning gear indefinately whith the Snow Leopard disk installed during boot up.  With the disk removed I get the flashing file folder with a question mark.  I called apple support we tried all the PRAM and SMC resets and then decided that we should go  to the Genius Bar once all those failed.  After an hour and a half drive to the nearest genius bar we were told that the we suddenly had a hardware issue which just happened to coincide with the new OS installation....  I'm not buying it and am looking for some help.  The macbook was running like a champ until we inserted a disk recommended by apple...   Any takers?

    You have a five year old computer, so a failing hard drive at this point is not so strange. You have a couple of options you can try. Start with this one, but if it does not work you will have to erase the hard drive. I hope you have a backup of all your files.
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Macbook Pro will not load after TM restore

    I have a Macbook Pro 4,1 and the HD was making noise so it was replaced with a Seagate 500 GB 7200 rpm and after I booted from the Install DVD and went through the Restore From Back Up in the Utilities the machine copied my last back up. However, after it told me to restart the machine, it begins to load and the gives me a gray screen with "You need to restart your computer. Hold down the power button for several seconds or press the restart button" I then reinstalled OS X and was able to see everything on the back up drive but I am needing the full system back up due to programs and the like. Any suggestions? Thanks

    Hi, and welcome to the forums.
    You're describing a +*kernel panic.+*
    There are four main possibilities:
    The new drive was not set up properly. See Kappy's post on +Extended Hard Drive Preparation:+ http://discussions.apple.com/thread.jspa?messageID=10768743&#10768743
    There was something else wrong with the hardware besides the internal HD. Run the +Apple Hardware Test,+ on one of the discs that came with your Mac. It will have instructions printed on it in very tiny type.
    Your backups are corrupted. While booted from your Leopard Install disc, use +Disk Utility+ to do a +*Repair Disk+* (not permissions) on your TM drive.
    The problem with the hard drive corrupted something on it, which was copied to your backups. Try the restore again, from an earlier backup.
    If none of those works, post back with the results and we'll try a workaround.

  • My macbook pro will not start after pressing the power button

    I have bought a macbook pro last year and now, I have a great problem since a few months.
    My macbook does not boot up, I hear no fan noices and no LED lights are blinking...
    Battey is full, but nothing happens (means system will not start up).
    I have also tried to start with the Power button - but the similar effect "NOTHING HAPENS".
    What I don't understand is, if I do nothing for one or two days and press then the power button, the system will start up and full functionality for a few days.
    And anytime I get the same problem again... and must wait also for a few days.
    Can anybody support me please.
    Thank you all in advance and looking forward to a fast reply.

    Try reseting SMU as suggested in link below
    http://support.apple.com/kb/ht3964
    Allan

  • MacBook Pro will not boot after switching graphics cards

    Dear All,
    I have a late-2008 unibody MacBook Pro. I have had it since April 2009, and I have not encountered any real problems with it.
    Yesterday, I switched to the 9600 graphics card for the first time since purchasing the machine. It logged me out as expected, but then proceeded to flash a blank blue screen at me for 20 minutes. Assuming that this was not normal, I powered down the computer by holding the power button. I powered it on again, and it will not get past the Apple symbol screen with the loading whirligig. I left it on for seven hours (overnight), and no change.
    I booted it from the install disc and ran the Disk Utility verify and repair. It either gives me no problem or a block count error, which goes away when I run repair. I tried running verify on permissions, but this gives me a "failed to exit" or some such error, same with repair permissions. Restarting gives me the same apple logo screen until forever.
    I've tried resetting PRAM, doing the battery removal and holding power button for 5 seconds, I've tried booting in safe mode (it won't), and doing an archive and install (which it can't do either, as it can't access my HDD or something). I've run the disk utility verify and repair several times.
    I unfortunately don't have a recent backup (slapping myself), so I'm open to suggestions before going into despair over my $2600 paperweight before doing an erase and install...
    Thanks in advance!
    PS: is there a way to open the computer in target disk mode via the install cd so that I CAN back it up?
    Message was edited by: Kaklz

    Thanks, Joe. That may be an option if all else fails. I don't currently own an enclosure, so I am looking for an alternative before spending any money (I know, "frugal Apple user" is unheard of, but...).
    I do have an old G3 tower, which I am using in the meantime, so if I can use this to open my MBP in target disk mode (or some other way of making a backup), I'd be overjoyed!

  • 17" MacBook Pro will not startup after software update & shutdown

    Last night I powered off (shutdown) my MacBook Pro (usually I leave it sleeping). It kindly reminded me I had updates to install. I said OK install them. I didn't check to see what they were, but I believe it was just the camera raw update. I also told it to shutdown after the update.
    This morning the computer was off, so far so good.
    Press the power button ... nothing. no chime, no diskdrive, blank screen....
    Battery level is good, power adapter good with green light.
    I have command control power buttoned. reset smu. cannot reset pmu as far as I know as that happens later in the startup procedure? post chime?
    I pulled the power and battery and let it sit all day, still nothing.
    Any ideas on the sudden failure. The software update seems unrelated, but somewhere in the back of my head I remember hearing about some problem with a camera raw update?
    It's a 1st generation 17" MBP. TIA

    Just to clarify the symptoms:
    Good power adapter, green light on mag-safe when plugged into machine. Good battery(s) have two, both charged.
    Press power button and nothing happens, no drive spin up, no noises, no chimes, no screen backlight (even with black screen) etc.
    tried control-command power button for 3+ seconds, naughta.
    tried pulling power and battery, then hold power for 5 sec. recconect bat and power, naughta.
    tried removing all power for 8+ hrs, naughta.
    It doesn't seem to be getting power to any components on -power button down -
    So, I am guessing here but seems like:
    a. Power button/connectors.
    B. Firmware issue as last time it was run a software update (unknown) was installed.
    C. Logic board?
    D. As there is a green light on the power adapter I expect it is not the Left I/O subassembly board?
    Are there any other power supply boards that may be involved, or are all of those components on the main board in this machine? Is the power button part of the keyboard assembly?
    TIA.

  • Macbook Pro will not boot after full time machine restore

    I have a 15-inch Macbook Pro, current model with the i7 processor, which I purchased in August 2010. Last week, when I tried to turn it on, it would not boot (just got to the gray screen with the Apple logo and spinning wheel). I took it in for repair and was told that it had a bad hard drive. The hard drive was replaced and I got the computer back yesterday.
    Everything looked good, it turned on, so I did a complete restore from my Time Machine backup on my Time Capsule, following the instructions on this page: http://docs.info.apple.com/article.html?path=Mac/10.6/en/15638.html
    The restore was successful and the computer prompted me to restart. I clicked the button to allow the restart and now I am back to the gray screen with the Apple logo and spinning wheel. It won't boot again.
    I also looked at this discussion (http://discussions.info.apple.com/message.jspa?messageID=10924233) and it sounds like the person here was able to get his computer to work after doing the Time Machine restore in the same process I used, so I don't know what else to do.
    I don't live near an Apple store, so it would be great if I could figure this out myself. Thanks for any help!

    skylaneval wrote:
    I have a 15-inch Macbook Pro, current model with the i7 processor, which I purchased in August 2010. Last week, when I tried to turn it on, it would not boot (just got to the gray screen with the Apple logo and spinning wheel). I took it in for repair and was told that it had a bad hard drive. The hard drive was replaced and I got the computer back yesterday.
    Everything looked good, it turned on, so I did a complete restore from my Time Machine backup on my Time Capsule, following the instructions on this page: http://docs.info.apple.com/article.html?path=Mac/10.6/en/15638.html
    See #E8 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).

  • MacBook Pro will not start after removing battery?

    My MacBook Pro has recently had a brand new battery put it, it's worked perfectly till now. My mouse was very loose so I decided to tighten it up. So I removed the battery, tightened the mouse and replaced the battery back (I've checked it's right) . However it now won't start up! At all, even when plugged into the mains. A faint flicking green light comes on the charger. Please help!
    MacBook Pro 13" 2010 mid (out of warranty) - Mac OS Lion

    Try this:
    PRAM/NVRAM Reset.
    http://support.apple.com/kb/HT1379
    good luck.....if all else fails, bring it to Apple and see what's going on with it.  Just don't let them know that you took the battery out.

  • Macbook Pro Will Not Boot After Full Timemachine Restore

    Hope someone can help. I upgraded my HD and attempted to restore from time machine. Everything appears to have worked well and the restoration was a success according to what the computer says. However, when I go to reboot I hear the startup sound then the apple pops up on the screen followed by a kernal panic error and the black box telling me that I need to hold down the start button and restart. I've tried resetting the pram, reinstalling from TM again and a couple of other things but it won't start up. I tried doing a clean install and it worked fine then I migrated files from my TM backup and that worked fine as well. However, that's not what I'm looking for, I wanted to get the machine exactly the way it looked before the upgrade and I thought TM was supposed to do that. I've read other forums were people have done it with no problems and am completely stumped at why it is not working. If anyone can shed some light I'd appreciate it.

    I booted with the CD and after selecting the language, went to the utilities pane and used the partition feature.
    Last night in desperation, I booted back to the CD and once again told it to do a full restore from TM. This was the third time that I had done it so far. The previous two times I had gone into the partition feature and partitioned the drive first. This time I skipped that step and just told it to restore from TM. It said if it did this it would erase everything on the drive. I agreed and let it do its work. This morning it once again, as in both previous times, said it had restored from TM successfully. I told it to restart and lo and behold, it booted and everything is just as I had it on the other drive.
    Needless to say, I'm confused but happy. I just wish I knew why it would not boot after restoring the previous two times? Maybe it just wanted me to spend more money:) I tried booting today only after I had gone to frys electronics and bought a SATA to USB cable and cloning software.
    Anyway, thanks for your help and if anyone knows why it wouldn't boot, let me know. It would be good to know for the future just in case. For anyone else having this trouble, keep trying. Third time was a charm for me.

  • MacBook Pro will not reboot after Security update or boot from disc

    I recently downloaded the latest security update and instead of immediately restarting I chose to shut down the system. The next day I booted up and ran into a problem with the start up stalling on the gray screen with the Apple logo and the spinning gears.
    After searching through many topics on this issues I have determined that I can likely repair permissions to resolve this issue or try a number of other options. However I can not seem to boot up from the Install disc or in Safe Mode. Booting up holding down the Option key doesn't give me any other option than the hard drive.
    Does anyone else have any ideas on how I can get past this increasingly annoying spinning gear mode so that I can try to repair the damage?

    This is what worked for me:
    Situation: After installing OS X 10.5.6, my mid 2007 MBP began to freeze, and eventually wouldn't reboot normally, nor in safe-mode or from a disk. Also tried resetting SMC and PRAM, still would boot from disk.
    Tried fysk, which worked for a while, but eventually the computer wouldn't reboot again.
    Connected it to another mac via firewire in target mode and erased all the data (yes I had a time machine back-up), but still wouldn't reboot from disk.
    Solution: A friend of mine tried resetting the PRAM again (command, Option P,R) but this time, he continued pressing the start button until the third chime (rather than the second as per apple instruction).
    All of a sudden we were able to reboot from disk, reintall the OS X 10.4.9 and then do a regular update to 10.5.6. My MBP has been working fine ever since.
    Hope this helps someone.

Maybe you are looking for