Macbook pro will not reinstall yosemite

I have had major problem with my Macbook Pro since downloading Yosemite from the beta version. it has been randomly shutting down then not turning on. When it had managed to work it is showing error on Hdd.
Tried to fix it but because of the shutting down issues nothing has worked.
Tried to boot from USB (Mavericks) but it says there was an error in the installation. Decided to wipe the Hdd and start again. Still saying that there was an error in installation and now will not connect to the internet. Unable to get past this and am going round in circles.
Any advice please!

you're not the only one, i'm guessing maybe apple's servers are having issues unless you've made some hw changes to the machine?
https://discussions.apple.com/thread/6120340?tstart=0

Similar Messages

My MacBook Pro will not install yosemite

MMy installation will not work at all it sits at 22 minutes remaining then cuts out and pops a message saying 'file system verify or repair Failed' then I try to to verify disk to repair it but it says I have to repair it first! Help I can't use my MacBook!

Since it sounds like after you did the install it worked good for you, but after using migration assistant you ran into problems . I would have to say that something in you older files is causing a problem. Try booting in safe mode.http://support.apple.com/en-us/HT201262 Then is this works go to your system preferences /users/login items and uncheck any that are there. Then go to security and uncheck require password. You might have to unlock and inter password to do this. Then go to utilities/console/crash report and see if you can port it in here. See if you can now boot normally.

My MacBook Pro will not load Yosemite

I received a message telling me the latest software was available for my Mac.
I downloaded it then the laptop closed down to re-install. It ran all night but still shows only half completed .
I switched off and left off for a while. I now have a laptop that keeps trying to load the software, stopping halfway through.
I can't force quit now don't know what to do. Thanks for any help anyone can offer

I received a message telling me the latest software was available for my Mac.
I downloaded it then the laptop closed down to re-install. It ran all night but still shows only half completed .
I switched off and left off for a while. I now have a laptop that keeps trying to load the software, stopping halfway through.
I can't force quit now don't know what to do. Thanks for any help anyone can offer

How do I uninstall Yosemite please ? Since I upgraded my 2011 MacBook Pro will not boot up

My 2011 MacBook Pro will not boot up following my upgrade to Yosemite. How do I uninstall or downgrade back to the previous version of OS please ?

You can't downgrade or uninstall unless you first erase the drive. Try the following:
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

I interrupted a software update and my macbook pro will not boot. I have tried to reboot using the startup disc, I have tried to verify the disc, and repair the disc. It tells me I need to erase and reformat the hard drive then reinstall the operating sys

I interrupted a software update and my macbook pro will not boot. I have tried to reboot using the startup disc, I have tried to verify the disc, and repair the disc. It tells me I need to erase and reformat the hard drive then reinstall the operating system. I do not have a back up of all my applications, my garageband music and other things. I also do not have time capsule set up on this machine, but I do have a 2 TB time capsule.
Is there anyway to back up this corrupted drive so I can restore my applications later?

There's an old saying. If you don't have a backup disc, then there must be nothing important to backup. That's just lesson #1. Lesson #2 is to never interrupt a software update. Not a good thing.
OK, I'm sure you know this. It just upsets me to read your story, knowing you have a lot of important stuff on your hard drive, and didn't use time machine.
You're pretty much in a bad place. My only hope for you is to boot to your Installation Disc, then using disk utility see if you can save the internal hard drive (by fixing what can be fixed). You might be able to see your user folder and some of your apps. I wouldn't even consider copying the library, because who knows what's been corrupted in there.
Good luck.

TS1647 My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?

My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?

Be sure to try restarting, if you have not done so since this problem occurred. You should also power off the printer while you do the restart...
If that does not help, you can try resetting the printing system. Open System Preferences Print & Scan (or Print & Fax) pane. In the sidebar with list of printers, right (control) click anywhere. Select Reset printing system. You will have to add back your printers after you do this.

HT4718 I recently upgrade my OS and now my MacBook Pro will not boot up

I recently upgrade my OS and now my MacBook Pro will not boot up

Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

MacBook pro will not boot. I get the gray screen, an apple icon and spinning wheel. Tried to start in safe mode but get the same screen. The only thing different was that I loaded the zedge sync app yesterday. Now getting this problem.

Macbook pro will not boot. I get the gray screen, an apple icon and spinning wheel. I tried to start in safe mode, but get this same screen. The only thing different is that I added the zedge update app to do a sync for adding ringtones to my apple cell phone. How can I get a good boot. I am fairly new to apple computer.

Reset PRAM: http://support.apple.com/kb/PH4405 and then try a normal boot.
Run the Startup Manager to select Startup disk: http://support.apple.com/kb/HT1310
If those did not work your disk may be sick or dying. The top priority at this point is to make a backup copy of your data.
Check the health of the disk. Boot in Recovery Mode (Boot, Command-R). Run Disk Utility. Click on the upper left disk icon. Does the S.M.A.R.T. status say “Verified”? If not the disk/SSD is unhealthy and needs to be replaced. Even if it does not show “Verified” you can still attempt a backup.
Click on the icon indented below, usually called “Macintosh HD” and Verify Disk. If it finishes with a green “OK” message then all is well with the disk. If it shows errors in red then you have found a problem to address once the system is backed up. Do not attempt software repairs until you have secured the data.
If the disk will not show up at all in Disk Utility as your ran the tests above then it may be dead or it may have a bad internal SATA cable. A trip to an Apple store for confirmation would be in order.
If you have an external disk drive you can use as a backup drive then do so. If not Google “Hitachi USB 3.0 external hard drive 1TB” to purchase one or go to a brick-and-mortar store (including an Apple store) to pickup one. Any 1 TB external drive will do.
Assuming it is still breathing you can try to recover the data without booting from the sick disk.
Reformat the external disk. (This will erase all data on the external disk.)
Boot in Recovery Mode. Start Disk Utility. Plug in the new disk. Select it’s disk Icon (the second one down, left justified). Select the Partition tab.
Partition Layout > Single Partition
Name: Emergency Recovery 1 (or whatever name you wish to use)
Format: Mac OS Extended (journaled)
Options… > GUID Partition Table > OK
Apply
Select the Restore tab.
Drag the old system volume (Macintosh HD) to Source.
Drag the new disk volume (Emergency Recovery 1) to Destination.
Click on Restore.
It may take a long time for the backup.
If that will not complete post back for other emergency data recovery methods, including those from a brody.
If the backup succeeds, use the First Aid tab in Disk Utility to select the old volume (Macintosh HD) and Repair Disk. If it does not finish with a green OK message try to repair it once or twice more. If it repairs with a green OK message, will it boot normally? If not, boot from the Recovery Partition and reinstall OS X.
If it is still not healthy, post back for further instructions.

System upgrade on MacBook Pro stopped and my MacBook Pro will not restart.

MacBook Pro will not restart.

Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
If you are unable to get it working using the above, then you will need to try this:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
And, if this doesn't help, then the HDD is failing or has failed.

HT1379 My Macbook Pro will not start at all. I automatically get the Apple Icon and a pinwheel that keeps clocking. How do I fix?

If anyone can assist with why my Macbook Pro will not pass the first screen, please respond. I have been getting the spinning pinwheel for a few days and cannot lg on now. In recent days I deleted some files and thought that would help the computer move a little faster but now it will not sllow me to access my account. Any suggestions on how to get pass the initial screen?

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

Because in my macbook pro will not let me open The Sims 3?

because in my macbook pro will not let me open The Sims 3?
Whenever I try to open the application icon starts jumping and then disappears

Says it works with 10.7, problems with 10.8 though.
Reinstall the program and trash the Dock icon, then make a new one and see if that works.
Then Trash it's preference file and relaunch the program to create a new one
Deleting the System Preference or other .plist file
If not then run through this, could be a sign of something bigger
..Step by Step to fix your Mac

Help! Installing updates an error occurred now my MacBook Pro will not restart. "Unable to find driver for this platform"

Help! Installing updates an error occurred now my MacBook Pro will not restart. "Unable to find driver for this platform"

Did you try more than once? If so:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

MacBook pro, will not start up- drive begins

MacBook pro, will not start up- drive begins?

OK, then try this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Since you can boot into safe mode successfully, I'm assuming the problem may be with a bad third-party extension or plug-in (such as a driver for third-party hardware or a bad Flash plug-in, for example.) It can also be a problem with a bad cache or preference file. If the above doesn't help then use a utility like Lion Cache Cleaner 6.0.5, Cocktail, TinkerTool Sys..., or OnyX to clean out user, system, and font caches.

My macbook pro will not startup, startup disc is full

my macbook pro will not startup, startup disc is full

Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.
If you are no longer able to boot your computer, then the drive is too full and has become corrupted. You may be able to repair it using Disk Utility on your Installer DVD:
Repair the Hard Drive and Permissions
Boot from your Tiger Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If this doesn't work, then you will have to erase the drive and install OS X from scratch. From the Tiger installer disc you will choose the Erase and Install install option.

My MacBook Pro will not powerup (even when connected to power supply).

My MacBook Pro will not powerup (even when connected to power supply). The caps lock key is the only light on.

Hi PatB11902,
Thank you for visiting Apple Support Communities.
If your MacBook Pro does not seem to power on, but the caps lock key will light up when you press the caps lock key, you are likely seeing a video issue.
There are several steps that can help troubleshoot this behavior, found at this link:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Start with these steps:
Reset the system
You can reset the Mac's parameter RAM and SMC.
Start up in Safe Mode.
If your Mac does not start up normally after these steps, here are some additional tips that can help:
Troubleshooting: My computer won't turn on - Apple Support
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
Sincerely,
Jeremy

Macbook pro will not reinstall yosemite

Similar Messages

Maybe you are looking for