Macbook pro will not restart to download update instead goes straight to download? macbook pro will not restart to download update instead goes straight to update download probably simple setting prob but i dont know can some on help me i just replaced a
Macbook pro will not restart to download update instead goes straight to download?
macbook pro will not restart to download update instead goes straight to update download probably simple setting prob but i dont know can some on help me i just replaced a dieing hard drive and and im running on 08 software pleas help
i replaced my hard drive and put osz back on now im trying to update but will not update supost to restart then update but instead of restarting it goeses to update and i have to shut it down pleas ignore typos im trippen
Similar Messages
-
i bought a second hand ipod 5 and the original owner forgot the email and password and i can't restore the ipod and it says i need the original apple ID but i dont know it could anyone help me??
If you can access the device: Tap Settings -> General -> Reset -> Erase All Content and Settings.
If you can't do that then you need to Restore it as New:
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.
You can also try using DFU mode:
Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
I have an iPhone 4 thats i was trying to fix and now it will not turn on at all is there anyway that i can access my pictures and contacts from my new phone or pc? Aslo the are both on the same apple id but i dont know if that would help or not.
Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created. -
I have got my iPhone 5 and i have forgot my passcode i have tried to restore and update via my windows computer and it still says sorry this iphone has a password please enter it before you sync but i dont know it ? Please help what do i do????!!
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software. -
How Can I Factry Unlock Iphone 4 32gb black japan but i dont know oprater so plz help me link me a truted website plz
plz help me anyone how can i unlock my iphone 4The carriers in Japan do not offer unlocking.
You can not get that phone legitimately unlocked. -
I really want to change the look of my lockscreen, but i dont know how. Plz help!
On my iPhone I can change the background of the lockscreen, or or with things like springboard I can change the theme. I wanted to do this on my mac so i downloaded Lockscreen 2. But I didn't want a passpattern, I would rather a password. So is there any way I can change the look of my dull-looking default lockscreen?
Device not detected in iTunes for Windows: support.apple.com/kb/ts1538
-
Hi there, I have MacBook Air (Mid 2012) with OSX 10.8.2. I want to update to latest OSX but it is saying that I need to first install MBA Flash Firmware Update 1.1. When I try to install this firmware, I am told I should have OSX 10.8.3, Each one asking other to update first, can some one help me in this regard ?
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault boot volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later. -
I have old MacBook running OS 10.6.8 I was told in Apple Genius Bar that I need a code from apple support to upgrade to 10.7. Apple support will not help because I am have their support plan. Can some one help?
hi Samberl
thanks a lot for the fast reply.
I was dragging folders from main folders on the laptop-desktop onto the external drive icon - to copy them across....
Your suggestion sounds very promising - I didn't know about 'cloning'.
Yes the idea is to backup the laptop - I thought I would just move it all now, new - and then keep saving/dragging physically across to the new drive myself each day or two...
Would this be the sizeof the internal hard drive = c.500 gb ? = under the HD icon on desktop is written :
" 499.76gb , 311.5 gb free "
I can erase and start agin on the new external drive - so this plan is to make two partititions, rather than the one at present, and make one of them 500 gb ?
I have found CCC [carbon copy cloner] googling - looks good.
When CCC site says it backs up the hard drive - would this mean all my files [over 100 gb] that are mostly in folders on the desktop, plus the others in itunes, iphotos etc found in the HD icon, would all copy across successfully [wherever they are in the computer ] ?
thanks again, hope you can clarify these things and then I will go for it.
It would be great and amazing if this 'lack of permission' message doesn't show up in the process of doing this ccc transfer - hopeful!
Julie -
I pre-ordered an album and i did not get it! i payed 14 some dollars for it and never received it i checked to see if i bought it and it said i did. i looked to see if i could re download the album but i dont know how please help!
If you are in a country where music can be redownloaded then it should show in the Purchased tab in the iTunes store app on your phone, and the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your computer's iTunes. If it doesn't show there then does the Store > Check For Available Downloads menu option on your computer's iTunes find it ?
-
i have apps to be updated but when i try to update them a message pops out saying "You have updates for other accounts, please sigh in with the other id". Can some one help me how can i still update the same with the new apple id ive created. As i dont have the access to the earlier id anymore.
You cannot. The apps are assigned to that Apple ID and there is nothing you can do to change that. You could choose to download them again with the new Apple ID, any paid apps will need to be purchased again.
Hope that helps. -
Hello can some please help I am trying to watch my HBO go on my apple tv I have sound no picture. I can watch my iTunes videos and youtube on my airplay with my ipad and everything is updated so I know it works. But not on HBO go, Max go, showtime go.
What you want to do does not work with an iPd running iOS 5. See the screenshot.
The latest update for HBO GO does allow for AirPlay on Apple TV - sound and video - but only on devices running iOS 6 and Apple TV running 5.1.1 or later - according to the app description. -
In the attempt of updating my ipod touch, i am faced with the problem of not being able to be connected to the itunes in my computer (windows xp ) because my ipod touch got blocked up, leaving the icon of USB cable and itunes on my touch screen. I am asked to restore my ipod first, but i have tried using all the examples stated and still can't help. Please please, can some one help me out ? Ones in the process of trying, i see an error code: 1656 and most of the time nothing. Thanks
See if placing the iPod in Recovery mode will allow a restore via iTunes
Next try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have a computer or iPod problem. -
how do you get your ipod touch to make a noise when people text you and to pop up on the screen my friend did something to her ipod to do this but i dont know how please help!!!!!!!!!!!!!!!!!!!!!!!!!!! its like she updated it but i already tried it!!!!!!i am very confused and want my ipod touch 4g like that please help thxns:)
Go to Settings>Notifications and turn alerts/sounds on for the app(s) in question. Not all apps have all options.
-
After downloading the new Lion, my photobooth doesnt open. I click it and it bounced on my dock then a screen pops up basically saying it needs to be updated but i dont know how to update it without opening up the app. What do i do?
Saturday, from inside my pictures folder, I opened PhotoBooth for the first time since installing Lion. The same message was given to me. I said OK, or something, and it updated with the new app., icons etc. with no problems. Wish I could help you more but I am a bit mystified as to why it didn't update with the Lion install in the first place?
RM -
HT201232 itunes will not recognise my device iphone 5s, pls can some one help???
itunes will not recognise my device iphone 5s, pls can some one help???
Hello Tantoh,
Welcome to the Apple Support Communities!
I understand that your iPhone is not being recognized by iTunes when you connect it. To help resolve this situation, please read over and work through the steps outlined in the attached article.
If you don't see your connected device in iTunes for Mac - Apple Support
Have a great day,
Joe
Maybe you are looking for
-
Set maximum of stepper unit off of cell
I would like to set the maximum range of a cell with stepper buttons by referencing another cell. In other words, if cell J10 contains the value "15", then the range for the stepper in cell K10 would be "0-15".
-
Create a template for a pre-exisiting rapidweaver site
HI I have inherited a site created in rapidweaver. I can import the site into dw ok. There about about 50 html pages and a whole pile (and I do mean a large pile) of files mainly js and css. There is a fairly complex hover menu, which I have to edit
-
Issue with AD group based collection
Hi, We are using AD security group based membership. Also, we are uing the same SCCM infra to cover other domains as well. From Activie Direcoty, it could able to discover the machines (computer objects) belongs to other domains but those computer ob
-
Assignment of plant in intercompany sales
Hi friends In inter company sales process configuration i could not assign plantA of Company-codeA with sales org+distribution channel of company-codeB. System showing error that Plant A belongs to different company code. regards kaushik
-
Don't see target disk when recovering from Time Machine
on my MacBook (vintage 2006?) I am now running 10.7.5 A few days ago it all of a sudden would not boot correctly. It goes through the start up screens and gets all the way to the screen where you can select a user (I have 4 users [family members] ins