Macbook pro will not start up, press the start button and it sort of clicks then nothing
Yesterday I remember MBP getting extremly hot. After a bit I opened it up and it did not work. pressing the start button and it sort of clicks then nothing.
Go step by step and test.
Restart.
http://support.apple.com/kb/ts2570
Startup in Safe mode
http://support.apple.com/kb/PH14204?viewlocale=en_US
Repair Disk
Steps 1 through 7
http://support.apple.com/kb/PH5836
Reset PRAM: http://support.apple.com/kb/ph14222
Reinstall OS X
http://support.apple.com/kb/PH13871
Similar Messages
-
My new macbook pro doesnt turn on. i press the power button and i can hear it runing but it wont turn on. i tried charging it but nothing works. help me please.
ilmare55555 wrote:
i cant go because if my parents find out my new mac broke they will kill me. i tried to restart it but it wont work i can only hear the fans working and then completely stop after 10 seconds.
It's new and under warranty. That's the reason to go to the Apple Store.
Did something happen to it? -
My new macbook pro doesnt turn on. i press the power button and i van hear it runing but it wont turn on. i tried charging it but nothing works. help me please.
ilmare55555 wrote:
i cant go because if my parents find out my new mac broke they will kill me. i tried to restart it but it wont work i can only hear the fans working and then completely stop after 10 seconds.
It's new and under warranty. That's the reason to go to the Apple Store.
Did something happen to it? -
My Macbook Pro will not stop loading at the start up page!
you know the start up page that appears when you press the power button, the blue ish white one with the apple logo on the middle and a circular loading thing? Well mine won't stop loading. I left it on all night and it still hasnt finished loading. Its the circular one that just goes around and around. Helpme! Wjat should I do??
Seeing the white, blue or gray screen with spinning thing for too long is a sign of trouble
It's called the "gray screen" and you can hopefully hold down the Shift key on a wired keyboard when rebooting to let the machine enter safe mode, then backup your data off the machine in case it's a failing hard drive and then go around uninstalling, updating reinstallling all your third party software.
If that doesn't fix it then a #18 Reinstall Just OS X usually does the trick too
go through the steps here one by one or have someone take a look at your machine
Step by Step to fix your Mac
Mac won't boot or "You need to restart"
Create a data recovery, undelete boot drive -
how do you fix a white screen on an ipod touch
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Because in my macbook pro will not let me open The Sims 3?
because in my macbook pro will not let me open The Sims 3?
Whenever I try to open the application icon starts jumping and then disappearsSays it works with 10.7, problems with 10.8 though.
Reinstall the program and trash the Dock icon, then make a new one and see if that works.
Then Trash it's preference file and relaunch the program to create a new one
Deleting the System Preference or other .plist file
If not then run through this, could be a sign of something bigger
..Step by Step to fix your Mac -
some apps on my macbook pro will not open,,,they bouce a few times and disappear. would someone please give me a straightforward answer on why this might be haappening(started after updates)) please?
Yay! Solved my own question; just did a hard shutdown, worked like a charm! Funny, didn't before. But who am I to question salvation?
-
my iphone 4 will not charge in the plug or connect to my laptop but my ipod 4th gen does. what could the problem be because the screen to show it needs charging will not come up and it will not restart by holding the home button and lock button. thanks
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
-Griff W -
MY MacBook Pro will not boot upThe screen is dark, but the sleep light is on and it makes the characteristic start up sound.What is wrong?
There is always the forum for MBP
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro -
Hi
After I have installed Mountain Lion (10.8) - my macbook pro will not connect automatically to my preferred wifi network. It used to do that on the previous versions. It seems that the mac does not recognize the preferred network, as it asks me to choose a network after evey sleep/restart. I have modified the network preference to have my preferred netwrok at the top of the list. I have tried with/without checking the "ask me before joining a new network". It still behaved the same.
Thanks
EitanTry making a new network connection and renewing the DCHP lease as detailed here:
fix-os-x-mountain-lion-wireless-connection-problems -
Please can someone help!
SInce I upgraded to the maverick system, my macbook pro will not register my USB anymore.
Regards
SPHi,
Are you sure you don't have unpluged it, without ejected it before? -
Because of low battery my iphone 5 got switched off and than its not starting by pressing the power button or by keeping it on charge. While charging a white screen comes for 2 second and goes away. This process continues till the phone is on charge. Please suggest how can I start my phone.
Hello Ritugor,
I would be concerned too if my iPhone was not powering on. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M. -
MacBook pro will not charge even when the charger is plugged in and working
So this is a strange one.
I have been using my MacBook pro for a lot of film editing and motion graphics. Recently, I noticed that my battery kept going down, even when charging. I thought nothing on it and kept using it. After around 4 hours, the battery went from 90% to 23% WHILE plugged in. This got me nervous. When I plug in the MagSafe charger, the light comes on and I get the "charging" symbol in my toolbar. The light turns orange and then, after a few minutes, the power starts to go down instead of up.
I have had this laptop since Christmas 2012 and this has never happened before. The laptop does charge, but only when I am running no application, when the screen is shut or when the laptop is powered off. Bear in mind that right now, I am on Firefox, that is the only application open, yet the charge is still going down. I assumed it was because I was using Premiere CS6, After Effects CS6 and Cinema4D, but now even when they are not open, the batter will not charge when I am using the laptop.
What is going on? Is in the charger? Any help would be greatly appreciated and I am starting to stress!
Thank you everyone for reading,
-Rory Campbell
UPDATE: I am currently only running Firefox and Finder. Now the laptop is charging as usual. However the second I open up Premiere, After Effects etc, it goes down. I have no idea what is going on!Try resetting the PRAM and SMC. If you don't know how to, don't worry. They're very easy to reset. Just google how to do it. If that doesn't work, the only thing I would suggest is to take both the laptop and the charger to your local genius bar to have them examined. If it's less than a year old, apple should replace whatever is wrong with it as long as it was a factory defect.
-
Please help
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
I have been fussing for hours with a Canon Pixma MX479 printer I received as a gift. The printer was obviously designed for PC control, and has terrible instructions for setting up the wireless capability, but I finally found a few hints online about how to add a WPS printer to my Airport Extreme, so I can finally detect the printer. However, when I try to add the printer, either under System Preferences or while just doing a print, my MacBook requires that I download a driver from Apple to use it. When I attempt to do that, I get a message the driver software is unavailable from Apple and that I should contact the manufacturer for the driver. I have already downloaded and installed the Mac OS driver from Canon twice, but my MacBook apparently can't find it. So I am forced to use Airprint in order to communicate with the printer. I would like to use the proper software to make sure I am accessing all of the features the printer offers. Can anyone tell me how to associate the downloaded driver with my printer when I am attempting to add it?
Hi Dwntso!
Welcome to the Canon Forums and thanks for posting!
So that the Community can help you better, we will need to know any error messages you're seeing either on your computer or the printer, and the version of OS X you've got on your MacBook as well as the way you intend to connect to your printer (USB or networked via WiFi or Ethernet).
Any other details you'd like to give will only help the Community better understand your issue!
If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team by phone or email.
Thanks and have a great day!
Maybe you are looking for
-
Target Display Mode iMac 27 mid 2011 with Mac Mini 2011 bootcamp
Hello, I can't seem to use Target Display Mode with Bootcamp. My configuration: Imac 27" mid 2011 with osx 10.8.4 Mac Mini Server 2011 with osx 10.8.4, bootcamp 5 and Windows7 Both are connected via Apple genuine Thunderbolt cable (2m). When I boot t
-
Flash (video) results in kernel panic/unresponsive UI
I have a MacBook 4,1. Watching flash video (it is neither site nor browser specific) sometimes results in a kernel panic with associated message, and everything stops responding. Most of the time the screen instead freezes but the sound continues to
-
Blank video - intermittent on 2011 MacBook Pro
13" MBP bought Sept 2011 running 10.7.3 Lion, all updated - screen going black spontaneously - cannot discern any cause - brightness controls do not help - like it goes into sleep mode spontaneously, but won't wake up - screen brightness *does* fade
-
Upload 100 GB data into sharepoint 2013 site
Hi Team, I want to upload 100GB data into sharepoint 2013 site for performance testing. I have the 5 document libraries. I want to upload the 10GB data to each document library in the site using powershell. Is it possible or not? Can you explain the
-
Lenovo g 510 webcam not working at all!on win 8
hi. i bought a new lenovo laptop. model name: g 510, core i5, amd hd 8570 2 gb, ram 6 gb, hdd 1 TB, and just after 3 days its webcam dose not working again! (note: it only works only 0.5 hr or even lessen during all 3 days), then, i returnd it to the