MacBook Pro will not stay on line

Hi there,
have mac Book Pro, year old. I have two networks in the house, slower DSL and newer and faster cable, both having wireless. I am having a problem with second one. I can connect easily, has no encryption so plain SSID network name, speed and signal are great. however after only few minutes connection freezes.
I go to OPEN NETWORK PREFERENCES > ASSIST ME and in next screen it shows me that ISP and INTERNET have red lights. Problem is that software is offering now available networks to choose from and I can easily take my "old" DSL based network but there is no new network because t has hidden SSID. so troubleshooting is going nowhere.
Why would Airport stop getting Internet? Network is still there but browser says that I am not connected to Internet. Hardwire connections work fine.
Thank you in advance for help!

Sorry everybody about posting this. Suddenly I found thread where 183 people complained about same thing and 68 thousand (!!!) people  have seen the thread. I got tired reading after 12 pages. Anyway, there is no solution so admin can delete this thread, it is pretty much useless.

Similar Messages

  • Mid 2010 Macbook Pro will not stay off or asleep

    Hi,
    I have a mid 2010 MacBook Pro will not stay turned off when I tell it to shut down.  It will shut down just fine, but a few seconds later it will boot up again.  This also happens when I try to close the lid (or just put it to sleep), it will work fine, screen/Apple logo on the back will turn off and the status LED will slowly pulse.  However a few seconds later, the LED stops pulsing and the Apple logo will illuminate.  If I open the lid I will be greeted with the log in page with zero delay (i.e. its been displaying for a while).
    This has become problematic because the computer always be running.  If I put it in my laptop bag the computer will get hot as ****. The only way to get it to really turn off is to let the battery die or remove the battery.  But this computer does not have the externally removable battery so that is not a trivial process.
    The symptoms exist in both Mac OS (Mountain Lion and Maveriks) and Windows 8/8.1.  This makes me believe its something in the hardware (or at least a setting in the hardware), not software (I know Apple doesn't care what Windows does, but it is exibiting identical behavior).
    I have reset the NVRAM and the SMC with no luck.  When I reset the SMC I didn't get a good indication that anything happened though, and was wondering if that is normal.  Resetting the NVRAM results in another restart, while its hard to tell if you actually reset the SMC.  I reset the SMC by turning the computer off, then holding the power button when it tries to restart (this usually gives me a few minutes where the computer will actually stay off), then pressing shift, control, option and power at the same time and releasing them at the same time.  This is how the Apple documentation said to do it.  They did not mention how long the must be held though so I presume that doesn't matter.
    Anyone experience this/have any ideas?
    Thanks,
    Jim

    Btmm error "can not coonnect to cloud server" Facetime and IMessage " Could not sign in, check your network connection and try again". Which I have again and again...

  • After updating to 10.10.3, now my Macbook Pro will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?

    After updating to 10.10.3, now my Macbook Pro 15" (mid-2014) will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?
    By the way, I also updated my Macbook Pro 17" (mid-2009) and it seems to be running fine, though I haven't tried to restart it and log in. I'm afraid I won't be able to get this one to work either if I do.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Macbook Pro will not stay connected to 3Play Bluetooth Receiver

    Hello.  My brand new Macbook Pro Retina (2.3 Ghz Intel Core i7, 16 GB 1600 Mhz DDR3, 500 GB memory, OSX 10.9.5) paired with the 3Play immediately and connected immediately, but would not stay connected over ten seconds.  My IPad and my android Galaxy phone work perfectly.  One website suggested that you have to download bluetooth explorer from Apple Developer and enable Apt-X.  I could not find a download of that type on the Apple Developer site.  Does anyone have a suggestion?  I am brand new to OSX and am still kind of stumbling my way through; in other words, I am less than a novice!  Thanks!

    Hello.  My brand new Macbook Pro Retina (2.3 Ghz Intel Core i7, 16 GB 1600 Mhz DDR3, 500 GB memory, OSX 10.9.5) paired with the 3Play immediately and connected immediately, but would not stay connected over ten seconds.  My IPad and my android Galaxy phone work perfectly.  One website suggested that you have to download bluetooth explorer from Apple Developer and enable Apt-X.  I could not find a download of that type on the Apple Developer site.  Does anyone have a suggestion?  I am brand new to OSX and am still kind of stumbling my way through; in other words, I am less than a novice!  Thanks!

  • Macbook Pro will not stay connected to the internet

    It appears that I am not alone in this problem, but none of the troubleshooting is helping.
    There seems to be no trigger, but randomly 0-10 minutes the internet stops working on the Macbook.  Sometimes restarting the wireless helps, most of the time it does not.
    I know that my network/internet are working fine because all of our other devices stay connected with the Macbook drops.  Is there a easy fix that I missed?
    Thanks,
    Mike

    Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
    Step 1
    Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
    Step 2
    Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
    Step 3
    If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
    Step 4
    Open the Energy Saver pane in System Preferences and unlock the settings, if necessary. Select the Power Adapter  tab, if there is one. Uncheck the box marked
              Wake for Wi-Fi network access
    if it's checked.
    Step 5
    Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
    Step 6
    In the Wi-Fi settings, select
              Advanced... ▹ TCP/IP ▹ Configure IPv6: Link-local
    Click OK and then Apply.
    Step 7
    Reset the System Management Controller.
    Step 8
    Reset the PRAM.
    Step 9
    Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
    Step 10
    Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

  • My macbook pro will not let me stay on a certain desktop.

    I created multiple desktops and was able to put my open application into different desktops. For example, I had Safari open on one desktop and powerpoint on the second. However, when I switched over from my first desktop to the second it switch back to the first automatically without me doing anything. It will not let me stay on the second desktop. Could anyone tell me what I'm doing wrong?

    dana2208 wrote:
    My MacBook Pro will not let me log on. How do I fix this? Can apple reset it?
    Yes.
    Password doesn't work?
    If so, try resetting it. If the computer is having any other problem, take it  to the Apple store to have it checked out.
    Reset Password starting from Recovery HD
    Start the computer,then press and hold down command and R keys to start into recovery partition.
    When you see the Apple logo, release the keys.
    Wait until  OS X Utilities window shows up.
    Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
    from the drop down.
    Terminal window will appear.
    Type in   resetpassword   and press enter on the keyboard.
    Leave the Terminal window open.
    Reset Password Utility window will open with Macintosh HD selected.
    Select the user account from the popup menu box.
    Enter a new password.
    Reenter the new password for the user.
    Enter a hint.
    Click the "Save" button.
    Click  in the menubar and select Restart.
    Log in.
    If Keychain dialog box appears, select “Create New Keychain”.
    Best.

  • When buying on line my macbook pro will not let me go to the payment page of the web site

    When purchasing goods over the internet my MacBook Pro will not allow me to go beyond the payment page therefore I am unable to complete my purchase. If I use a Windows operated PC in the same household I do not have this problem.
    Are there any security settings on my MacBook preventing me going any further?
    Les

    Your MBP will let you do everything. What you haven't told us is what browser, what prompt comes up when you select pay, and does this happen on every web site you buy stuff on.

  • My macbook pro will not hold life even though plugged in - I know battery life is about gone; does that mean it won't stay alive even though plugged in?

    My macbook pro will not hold life even though it is plugged in when I use it.   I know the battery life is about gone, but didn't realize this effects it when plugged in or does it.  It is about 7 years old.   This is second battery.     Am I right to think this?

    You are right - a dead battery can some times play these kinds of tricks.
    If this is a removable battery, I suggest you take out the battery and try running it on the power adpater alone.

  • Macbook Pro will not boot beyond grey screen.  System freezes.

    My Macbook Pro will not boot-up or get beyond the grey screen (with spinning gear wheel.)  I've tried all the recommended actions: resetting PRAM, disk repair, permissions repair, re-boot in safe mode etc but still the problem persists.  When viewing the safe-boot in verbose mode, the system seems to hang at the stage when it's checking the Airport & Ethernet - the last line on the page reads: "AppleBCOM5701Ethernet:   0    0    setFixedSpeed - logic error, speed any?"
    Any ideas how to fix this without doing an Archive & Install?
    I'm assuming that if I do an "Archive & Install" then I will lose all my Applications (VLC, Handbrake, MS Office for Mac etc.)  Will this actually be the case?  Will I lose them.
    Any help gratefully received.  Many thanks.

    jfromplymouth wrote: ...I'm assuming that if I do an "Archive & Install" then I will lose all my Applications (VLC, Handbrake, MS Office for Mac etc.)  Will this actually be the case?  Will I lose them...
    Archive and Install just affects the System files, so any apps you have  should still be available afterwards.  The Installer on the disk that  came  with your Mac, when you bought it, will tell you this before you  proceed.  Of course, you can always back out of the Installer if you feel chicken.
    Notwithstanding it is still necessary to backup everything.  You need to check that Time Machine is set to also backup your Applications folder.  It might be set not to do this. 
    It may not be necessary to worry about this if you have the original installer disc(s).  I think any stuff downloaded from iTunes etc can be re-downloaded.  However, it's probably quicker to get Time Machine to backup your apps if you can afford the HDD space.  It's bound to be quicker than re-downloading the stuff plus any updates.  And of course there's those Apps that you have but forgotten about.  What about them?

  • My macbook pro will not go to sleep

    Macbook pro will not sleep by any means except when it is on battery and if I plug the power back in it will stay sleep for a while and wake up on its own. I have spoken with express lane and verified the HD and the premissions, etc. and it worked for a when and the problem returned.

    My MBP does this on occasion as well.
    It also used to make a terrible processor noise, but I just got the logic board replaced through apple care. So far it has not had the sleep problems since i got it back, but it has only been a week, so who knows.
    also make sure you have updated the firmware, if you have one of the early models it may be outdated (like mine).
    I never did figure out a permanent solution, but it seems like it happened a lot less after the firmware update.
    Good luck, I'll let you know if mine is in the clear with the new logic board

  • HT1379 My Macbook Pro will not start at all. I automatically get the Apple Icon and a pinwheel that keeps clocking. How do I fix?

    If anyone can assist with why my Macbook Pro will not pass the first screen, please respond. I have been getting the spinning pinwheel for a few days and cannot lg on now. In recent days I deleted some files and thought that would help the computer move a little faster but now it will not sllow me to access my account. Any suggestions on how to get pass the initial screen?

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • Have Macbook Pro & 4th gen iPod Touch. Downloaded & installed iOS 4.3.2 yesterday. Upgrade went without a hitch, but now iTunes on My Macbook Pro will not open. I get an error that says "iTunes" Data too new to be used with this version of iTunes.

    Have a Macbook Pro and a 4th gen iPod Touch. Downloaded and install iOS 4.3.2 yesterday. Upgrade went without a hitch, but now iTunes on My Macbook Pro will not open. I get an error that says --The file "iTunes Library" cannot be read because it was created by a newer version of iTunes--. I am running iTunes 10.1.  I searched for Updates to my MacBook Pro (running 10.6.7), but comes back saying no updates available. WHAT IS GOING ON??

    Is your computer still authorized in the Store menu in iTunes?
    iTunes Store: About authorization and deauthorization
    When I changed to my new MacBookPro I had to authorize it although I used TimeMachine to transfer my settings and data.
    Did you try to deselect Wi-Fi syncing and enable it again after that?
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
    Did you already transfer your purchases and manually started a backup?

  • Mid-2009 Macbook Pro will not turn on

    Hi Folks,
    so my mid-2009 15in Macbook Pro will not turn on. I updated the OS to Mavericks in December 2013. I'm from California, but I recently moved to the Guam/Marianas area where it is more humid and generally around 87 degrees F all day. For the past month my computer has worked fine, albeit I did notice the fan was running a little more than usual. I usually would just put it into sleep mode when I would finish using it (apparently a bad idea based off of reading other posts concerning humidity and, more importantly, heat). One day I finished using it, closed it and the next day went to open it; I could hear the fans start to work, but then it stopped. It hasn't turned on since. You press the power button and nothing happens. I tried all the troubleshooting stuff.
    So, my question is this: what do you think is the problem? Moreover, how much do you think it could cost to repair it? My experience with computers suggests to me that it's probably a dead motherboard. I'm wondering if it's worth trying to salvage this thing or if it would be prohibitively expensive. There are no Apple stores in the area to take it in to get advice unfortunately.
    Now, I just want to vent a little frustration. I have many apple products, and I've even switched my mother over to an apple computer, but now that I need some very basic support, apple doesn't provide a contact e-mail or a free chat? I think charging someone $19 for 'one time assistance' is ludicrous. I bet if I brought this into an apple store I could at least get some advice, and thus get some idea how I want to proceed with repairs or not. I suppose I'm also rather frustrated that my macbook, which I have been most happy with all these years, breaks because I go somewhere a little more humid and generally warmer? It would appear that the hardware failure is connected to the climate. This makes me skeptical about purchasing another mac if it can't handle a little humidity. (I have not spilled liquids on it, nor have used this computer while transitioning from an air-conditioned/humid location which could potentially cause condensation). I do not think I'm being unreasonable (yes I do think a $2500 computer should not fail after less than 5 years), but if you think I am unreasonable, please enlighten me.
    Thanks for any help. I really appreciate it.
    Ken

    Ken,
    the “Important Handling Information” in the little white manual that came in the box with your MacBook Pro states that its operating temperature range is from 50 °F to 95 °F (10 °C to 35 °C), and that its operating range of relative humidity is 5% to 90% (non-condensing). If your corner of the Pacific is outside of these ranges, the manual states that “Failure to follow these handling instructions could result in damage to your MacBook Pro”.
    I have no idea what problem your MacBook Pro has; since you’ve tried all of the troubleshooting stuff, you’ll need to somehow get your MacBook Pro to a qualified service facility to diagnose the problem. If the logic board does need to be replaced, it would probably cost hundreds of dollars for a replacement, and you might find that purchasing a replacement used MacBook Pro of the same model to be price-competitive with just replacing your MacBook Pro’s logic board.
    If you find Apple’s out-of-warranty policies unacceptable, then your only alternative to venting would be to purchase your next computer from a different company which has out-of-warranty policies more to your taste.

  • My Mid 2010 MacBook Pro will not boot

    My Mid 2010 MacBook Pro will not boot regularly, in safe mode, in recovery mode or from original OS DVD. Is this the logic board?
    I've tried resetting the SMC and pram numerous times and even tried switching out hdd's to try and do a clean install on a new hdd.
    If I attempt to boot regularly or from recovery drive the grey apple logo appears for a period before the screen goes black and the power LED operates as though in 'sleep' mode. I'm unable to wake it from this state and the same applies to booting in safe mode.
    When attempting to boot from the OS DVD that was originally packed with the computer it just freezes on the language select option, this occurs with the other hdd's I have attempted to use.
    Any other suggestions to get it working? I fear the logic board has gone and that the repair won't be worth the money.
    Thank you in advance.

    Hi JRC8.8,
    It sounds like you have been on the right track in trying to troubleshoot this issue. You may want to see if your MacBook Pro will boot directly to the Apple Hardware Test, as outlined in the following article:
    Apple Support: Using Apple Hardware Test
    http://support.apple.com/kb/ht1509
    Regards,
    - Brenden

  • My Macbook Pro will not charge. I have tried other charges and nothing. Can the MagSafe port go bad? Is that expensive to repair?

    My Macbook Pro will not charge. I have tried other charges and nothing. Can the MagSafe port go bad? Is that expensive to repair?

    The port can fail. Internal boards can fail. Batteries can fail. All with the result that no charging occurs. 
    You can try Resetting the System Management Controller and you can try Troubleshooting MagSafe adapters. 
    But usually you will have to take the mac in to a service place for testing.  It can get expensive, although occasionally it is not.
    charlie

Maybe you are looking for