MacBook Pro will not wake, holding power button does not shut it down either

My mbpro will not wake and even holding down the power button will not shut it down. Any ideas? Thanks.

You can force quit a shut down by holding the power button for a extended amount, say ~10 sec or so.
The try resetting the SMC http://support.apple.com/kb/ht3964

Similar Messages

Wife's Mac Book Pro locked up will not allow her to log on, it froze up on her so she did a hard shut down by holding power button until it shut down. Will power up but not allow her to log in on the log in screen. Any suggestions?

Wife's Mac Book Pro locked up. She shut it down by holding power button unitl it shut down, when she powers it up now it will not allow her to log in on the log in screen. Any suggestions?

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

My MacBook Pro with Retina display displays power point and not other windows when connected to a projector

My MacBook Pro with Retina display displays power point and not other windows when connected to a projector. Can anyone help out please?

You should also ask this in the MacBook Pro forum. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro

Froze on black screen and power button does not work

my sons ipod touch is stuck on a black screen when plugged into the computer got a spinning wheel and will not connect now spinning wheel will not go away the power button does not work so can not reset it manually
any suggestions would be appreciated

- iOS: Not responding or does not turn on
Neglect the reset and when it says place the iPod in recovery mode use one of thes programs
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How do I get my photos off 1st generation itouch? I have macbook pro, ipad, iphone. Itouch syncs but does not have option to share in any capacity ie send via email, etc. Also, the computer from which photos were originally taken from has crashed.

How do I get my photos off 1st generation itouch? I have macbook pro, ipad, iphone. Itouch syncs but does not have option to share in any capacity ie send via email, etc. Also, the computer from which photos were originally taken from has crashed.

It has always been very basic to always maintain a backup copy of your computer.
Did you fail to back up your pics?
The photo sync is one way - comptuer to ipod.
You can e-mail them to yourself (instructions in the manual), but they will not be of the original quality.

Power button does not react iMac Core Dua 20"

Hello,
I just purchased an iMac 20" intel Core Duo. I leave the machine to go to sleep during the night. Almost everyday when I want to start the next day my iMac does not wake-up pressing "enter", moreover the power button does not even respond. I have to unplug the power cable and after a few seconds the powerbutton can activate the Mac again. Can anybody help or should I immediately return for repairs?
Erik

Welcome to the Apple Discussions.
One question. Is your iMac a Core Duo (no longer made) or a Core 2 Duo?
Try resetting the System Management Controller;
Intel-based iMac, Intel-based Mac mini: How to reset the System Management Controller

I need to hard reset a Palm TX but the Power button does not function.

I need to hard reset my Palm TX but the Power button does not function. Is there any other way to perform the hard reset or otherwise delete all of my data?
Post relates to: Palm TX

Hi,
PowerBtn from the Canuck Software HomePage.
NOTE: This is Not a Blazer friendly download and only for downloading using a Chunky Computer thingie.
http://www.canuck-software.ca/
PowerBtn will allow you to set a HardButton to turn the TX on and off in the same fashion as the PowerButton, if you want.
This setting will remain active while 'Enable' on the PowerBtn screen is active.
The user can select 'Disable' on the PowerBtn screen.
The setting will survive a Soft Reset. (Hi PG )
If the Palm PowerButton fails completely then you will not be able to do a Hard Reset.
The PowerBtn app has a 'Hard Reset button' which you tap and after a time countdown (you can cancel in this time) it will perform a Hard Reset. This is the same as the Hard Reset app mentioned above.
The 'Enable' and 'Disable' mentioned above do not affect the 'Hard Reset button'
NOTE: PowerBtn also has a 'Program itself becomes power button' feature but I do NOT recommend you use this.
If you enable this you will not be able to change the setting or use the 'Hard Reset button' because when you Tap on the PowerBtn Icon the TX will turn Off. The only way to change the setting or use the 'Hard Reset button' would be to Delete PowerBtn then install again.
You can also turn your TX On by pushing the 5WayNav Select (middle button) to bring up the clock then double push it. The TX will stay on at the same place it was in when you turned it off, in the same way it would if you used the Power Button
All the best, woz of oz
Post relates to: Palm TX

My iphone4 power button does not work can i take it into apple store would they replace it with a new iphone or whats the deal?

My iphone 4 power button does not work can i take it into apple store and replace it or what are some options

Assuming it is out of warranty Apple Genius bar will exchange for an out-of -warranty replacement unit identical to the to donor
In US $149 for in iPhone 4

The power button does not work

i recently noticed that my original iphone power button does not work i push but nothing happens. I know that i have to fix but the problems is that the warranty is been over for long i need to know a good place to repair because the apple people said they could not fix it. I live in Texas so somewhere close would be nice.

This link is for one 3rd party repair service you can contact for the first generation iPhone and for the iPhone 3G, which is located in Dallas.
http://www.drcellphone.com/iphone-repair-service.php
http://www.drcellphone.com/iphone2g.php

After installing Mavericks, power button does not put my iMac to sleep.

After installing OS X Mavericks, the power button does not work as before, any help?
Thanks
Victor

CT, the behavior of the power button on Mavericks (10.9.2) is not as the note (OS X Mavericks: Using the power button - Support - Apple) describe. I have to press four or five times de power button in order to put the mac to sleep.

Lenovo V570 Laptop Power Button does not work. Did I screw it up?

Hi, my Lenovo V570 keyboard recently stopped working so I took the keyboard off to reposition the cable. In the process I disconnected another cable on the motherboard (shown in the pictures below). I also cant find the black plastic piece that was holding it down.
Now not only does the keyboard not work but the power button does nothing. After research though Ifound out this laptop is notorius for having the power button go bad.
When I plug in the AC adapter I do see the battery light go on and it charges so I dont think the motherboard is bad. I
have tried every trick in the book as far as getting static out of the laptop power button (holding down power button for
certain times). I looked at the mainteneance manual for this laptop and could not figure out what the disconnected cable does. I have tried reconnecting the cable without the plastic piece but that did not work.
Is the disconnected cable responsible for this or should I order a new power button board with cable?
Link to image 1
Link to image 2
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums

Hi Deziant,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with power button not working in your V570 laptop.
As per the snap shot which you have shared it looks like the black support connector is broken, you can fix this cable by using a gum, but I would suggest you to visit nearest service center to fix this issue.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Updated to IOS 8 and now power button does not respond and screen is frozen with apple logo.

Updated iPad to IOS 8 -- screen locked. Now screen is frozen with apple logo and the power button is not responding.
Thanks for any help!

That is normal while it is loading the update. Give it some time(shouldn't be more than 40 minutes). If not, hold the home & sleep/wake button until it is black, and then it restarts.

Ipod Touch 3g power Button Does not respond!

Greetings Friends...
power button is not responding... i had a JailBreak i don't know if has something to do whit the problem, I already Reset my Ipod and still does not work...
please Help....
:3

Jailbreaking can have unintended consequences,

MacBook Pro 13" unibody mid 2012 power button not working!

My macBook won't start (or shut off) by pressing power button. It does however start if I connect maglock, I've troubleshooted and am all out of ideas.

Is it under Applecare? If so, just take it in and let them fix it for you. The only other thing I can think to try is an SMC reset, though I don't hold much hope for that as a fix. Use the option "for a battery you should not remove yourself"
http://support.apple.com/kb/ht3964

HT6150 Single press of Power Button does not put my MacBook Pro to sleep after this update! Do I need to change anything in the settings? Any help please? Thank you!

The title says it all! After installing the new Mavericks update, I cannot put my MacBook Pro to sleep after a single press of the Power Button like before. Does it have something to do with this update or my MacBook Pro? Or do I have to change something in Settings?
Any help would be appreciated.
Thanks!

Send your opinion to Apple.
But remember that there are others.
A moment is a medieval unit of time equal to 1.5 minutes or 1/40 of an hour. This reckoning is derived from the work of Bartholomeus Anglicus, writing in 1240 that each hour was divided into four points, each point into ten moments, each moment into twelve ounces, and each ounce into 47 atoms.
In modern English it usually refers to "a short period of time",[2] the exact length remaining ambiguous.

MacBook Pro will not wake, holding power button does not shut it down either

Similar Messages

Maybe you are looking for